Larysa E. Nykyforova
Larysa E. Nykyforova has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Sergey I. Vyatkin
Institute of Automation and Electrometry (Russian Federation)
4 shared publicationsOlexander N. Romanyuk
Vinnytsia National Technical Univ. (Ukraine)
2 shared publicationsSergii A. Romanyuk
Vinnytsia National Technical Univ. (Ukraine)
2 shared publications- Sergii V. Pavlov
Department of Biomedical Engineering and Optic-Electronic Systems, Vinnytsia National Technical University, 21021 Vinnytsia, Ukraine
2 shared publications Aigul Turgantarova
1 shared publicationAinur Kozbekova
Institute of Information and Computational Technologies (Kazakhstan)
1 shared publication
Latest Publications
- Open Access
- 1 July 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 23 (7) , 42-49
Ethological Changes and Teratogenesis of Model Organisms as an Indicator of Biotesting of the Electromagnetic Radiation Influence
With the development of information technology, electromagnetic radiation becomes a tangible view of the physical (wave) environmental pollution. Modern scientific research aimed at the components of the electromagnetic environment pollution problems mainly involves the anthropocentric approach....
- 1 July 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 23 (7) , 42-49
Open AccessEthological Changes and Teratogenesis of Model Organisms as an Indicator of Biotesting of the Electromagnetic Radiation Influence
With the development of information technology, electromagnetic radiation becomes a tangible view of the physical (wave) environmental pollution. Modern scientific research aimed at the components of the electromagnetic environment pollution problems mainly involves the anthropocentric approach....
- 11 October 2021
- Published by Taylor & Francis
- p. 53-60
Efficiency Assessment Functioning of Vibration Machines for Biomass Processing
The use of new energy-saving technologies has led to the significant development of vibration machine designs and their widespread use, in particular for biomass processing. In the course of their operation, the question of efficiency and reliability of the use of this type of machines is quite relevant, related to the availability and possibility of using reserves of its operation. The machines of this type must meet the requirements of quality and reliability in order to fulfill their official purpose. Due to the design features and the complexity of the processes that occur during their, work analytical calculations of durability and reliability in the classical version are quite approximate in nature and do not provide the necessary accuracy. Therefore, the question of the reliability and durability of the vibrating biomass processing equipment is urgent. The method of estimating efficiency and reliability based on the use of quantitative characteristics of probabilistic and statistical character was proposed in the paper. Such indicators for quantifying the reliability and reliability are: probability of failure, failure rate, failure rate, and failure time. These indicators are one of the most important in the technical diagnostics of the operation of vibrating machines for processing biomass and estimation of their residual resource. The basic calculation, dependencies, the analysis of laws of distribution of random variables that influence the value of the above-mentioned coefficients were given.
- 11 October 2021
- Published by Taylor & Francis
- p. 53-60
Efficiency Assessment Functioning of Vibration Machines for Biomass Processing
The use of new energy-saving technologies has led to the significant development of vibration machine designs and their widespread use, in particular for biomass processing. In the course of their operation, the question of efficiency and reliability of the use of this type of machines is quite relevant, related to the availability and possibility of using reserves of its operation. The machines of this type must meet the requirements of quality and reliability in order to fulfill their official purpose. Due to the design features and the complexity of the processes that occur during their, work analytical calculations of durability and reliability in the classical version are quite approximate in nature and do not provide the necessary accuracy. Therefore, the question of the reliability and durability of the vibrating biomass processing equipment is urgent. The method of estimating efficiency and reliability based on the use of quantitative characteristics of probabilistic and statistical character was proposed in the paper. Such indicators for quantifying the reliability and reliability are: probability of failure, failure rate, failure rate, and failure time. These indicators are one of the most important in the technical diagnostics of the operation of vibrating machines for processing biomass and estimation of their residual resource. The basic calculation, dependencies, the analysis of laws of distribution of random variables that influence the value of the above-mentioned coefficients were given.
- 15 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11045, 1104513
A GPU-based multi-volume rendering for medicine
A GPU-based method of multi-volume rendering is described. the analytic results are supported by simulations of volume rendering on a number of scenes with function-based surfaces. our method supports a large number of volumes, complex translucent functional objects as well as constructive solid geometry intersections of volumes and function-based surfaces.
- 15 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11045, 1104513
A GPU-based multi-volume rendering for medicine
A GPU-based method of multi-volume rendering is described. the analytic results are supported by simulations of volume rendering on a number of scenes with function-based surfaces. our method supports a large number of volumes, complex translucent functional objects as well as constructive solid geometry intersections of volumes and function-based surfaces.
- 1 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10808, 30
Texturing method of the full pixel dynamic range
This paper highlights lights in a volume-oriented rendering which features a lot of advanced techniques intended to synthesize a highly realistic visual environment for a diverse set of applications. According to proposed method there is almost no need to go higher than 12 bits if the illumination models is computed at a higher resolution because it is then possible to distribute a particular texture over a restricted range of the full pixel dynamic range.
- 1 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10808, 30
Texturing method of the full pixel dynamic range
This paper highlights lights in a volume-oriented rendering which features a lot of advanced techniques intended to synthesize a highly realistic visual environment for a diverse set of applications. According to proposed method there is almost no need to go higher than 12 bits if the illumination models is computed at a higher resolution because it is then possible to distribute a particular texture over a restricted range of the full pixel dynamic range.
- 1 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10808, 113
Function-based interactive editing of decoration and material properties
The method of increasing the realism of forming graphic scenes due to adaptive editing is proposed. The user is given the opportunity to change the image of a three-dimensional object using the functions of perturbation. At the same time, a higher degree of smoothness of the form is achieved compared to the use of splines. The use of excitation functions makes it possible to achieve an acceptable level of detail, which allows you to manage the realism of the formation of graphic scenes.
- 1 October 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10808, 113
Function-based interactive editing of decoration and material properties
The method of increasing the realism of forming graphic scenes due to adaptive editing is proposed. The user is given the opportunity to change the image of a three-dimensional object using the functions of perturbation. At the same time, a higher degree of smoothness of the form is achieved compared to the use of splines. The use of excitation functions makes it possible to achieve an acceptable level of detail, which allows you to manage the realism of the formation of graphic scenes.
- 7 August 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 104452S-104452S-8
Quality of content delivery in computer specialists training system
- 7 August 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 104452S-104452S-8
Quality of content delivery in computer specialists training system
- 7 August 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10445, 104450U-104450U-7
Using lights in a volume-oriented rendering
- 7 August 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10445, 104450U-104450U-7
Using lights in a volume-oriented rendering