Ekrem Durmaz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ekrem Durmaz has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Saim Ates
Faculty of Forestry, Forest Industry Engineering, Kastamonu University, Kastamonu, Türkiye
6 shared publications - Saim Ateş
Department of Forest Industry Engineering, Kastamonu University, 37150 Kastamonu, Türkiye
2 shared publications Ahmed Hamad
1 shared publicationAlperen Kaymakci
Kastamonu University
1 shared publication- Alperen Kaymakci
Kastamonu Üniversitesi
1 shared publication Ayhan Tozluoglu
1 shared publication
Latest Publications
- 25 June 2026
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 41 (3) , 451-463
Sustainable paper coating suspensions from waste paper: a nanocellulose–lignin based approach
This study aims to comprehensively evaluate the effects of coating processes employing lignin-reinforced nanocellulose suspensions, derived from various types of waste paper, on the functional and physicochemical properties of packaging papers. In particular, the study focuses on elucidating how the incorporation of lignin within nanocellulose-based coating systems affects key performance characteristics, including mechanical strength, barrier performance, surface properties, and overall paper quality. The results revealed that physical, mechanical, optical, and barrier properties of the papers were significantly influenced by the coating formulation. Papers coated with cellulose nanofiber/lignin (CNF/L) and cellulose nanocrystal/lignin (CNC/L) suspensions exhibited increased thickness and grammage relative to both uncoated and water-coated counterparts. Following the application of nanocellulose/lignin (NC/L) suspensions, a decline in tensile and tear indices was observed, whereas the burst index demonstrated a notable enhancement. Evaluation of optical properties revealed that, except for opacity, all measured optical parameters improved upon coating with CNF- and CNC-based suspensions. In terms of barrier performance, NC-based coatings resulted in higher water absorption values while simultaneously reducing air permeability compared to uncoated papers. To sum up, this study suggests that leveraging CNF and CNC can enhance the quality of low-grammage packaging papers, potentially opening new avenues for their applications.
- 25 June 2026
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 41 (3) , 451-463
Sustainable paper coating suspensions from waste paper: a nanocellulose–lignin based approach
This study aims to comprehensively evaluate the effects of coating processes employing lignin-reinforced nanocellulose suspensions, derived from various types of waste paper, on the functional and physicochemical properties of packaging papers. In particular, the study focuses on elucidating how the incorporation of lignin within nanocellulose-based coating systems affects key performance characteristics, including mechanical strength, barrier performance, surface properties, and overall paper quality. The results revealed that physical, mechanical, optical, and barrier properties of the papers were significantly influenced by the coating formulation. Papers coated with cellulose nanofiber/lignin (CNF/L) and cellulose nanocrystal/lignin (CNC/L) suspensions exhibited increased thickness and grammage relative to both uncoated and water-coated counterparts. Following the application of nanocellulose/lignin (NC/L) suspensions, a decline in tensile and tear indices was observed, whereas the burst index demonstrated a notable enhancement. Evaluation of optical properties revealed that, except for opacity, all measured optical parameters improved upon coating with CNF- and CNC-based suspensions. In terms of barrier performance, NC-based coatings resulted in higher water absorption values while simultaneously reducing air permeability compared to uncoated papers. To sum up, this study suggests that leveraging CNF and CNC can enhance the quality of low-grammage packaging papers, potentially opening new avenues for their applications.
- 27 March 2026
- Published by Turkish Journal of Forest Science in TURKISH JOURNAL OF FOREST SCIENCE
- Vol. 10 (1) , 1903483
Maun (Swietenia mahagoni) odununun bazı karakteristik özelliklerinin belirlenmesi
Yenilenebilir bir biyomalzeme olan ahşap, yüksek mekanik dayanımı, işlenebilirliği ve karbon depolama kapasitesi sayesinde sürdürülebilir malzeme teknolojilerinde önemli bir yere sahiptir. Bu kapsamda, ekonomik değeri yüksek tropikal ağaç türlerinin özelliklerinin incelenmesi, sürdürülebilir hammadde kullanımının desteklenmesi ve endüstriyel uygulamalara yönelik potansiyellerinin ortaya konulması açısından önem taşımaktadır. Dayanıklılığı, işlenebilirliği ve estetik görünümüyle öne çıkan maun (Swietenia mahagoni) odunu da bu türler arasında yer almaktadır. Bu çalışmada, ülkemize ticari amaçla ithal edilen maun odununun kimyasal, morfolojik ve anatomik özellikleri araştırılmıştır. Kimyasal analizler TAPPI standartları çerçevesinde gerçekleştirilmiştir. Morfolojik incelemeler öncesinde maun odunu örneklerine nitrik asit maserasyonu uygulanarak lifler ayrıştırılmış, anatomik araştırmalarda ise odun örnekleri küp şekline getirildikten sonra gliserin, etil alkol ve destile su karışımında yumuşayana kadar bekletilmiştir. Maun odununun holoselüloz, alfa selüloz, lignin, ekstraktif madde ve kül içerikleri sırasıyla %76,53; %31,66; %24,88; %6,34 ve %0,48 olarak tespit edilmiştir. %1 NaOH, sıcak su ve soğuk su çözünürlükleri ise sırasıyla %20,04; %8,50 ve %7,41 olarak belirlenmiştir. Yapılan morfolojik incelemeler sonucunda maun odununun lif uzunluğu 1,53 mm; lif genişliği 23,87 µm; lümen genişliği 8,56 µm ve lif çeper kalınlığı 7,65 µm olarak bulunmuştur. Morfolojik veriler ışığında maun odunu liflerinin keçeleşme oranı 64,09; elastikiyet katsayısı 35,86; rijidite katsayısı 32,04; Mühlstep oranı 87,13; Runkel oranı 1,78 ve F faktörü 20000,00 olarak bulunmuştur. Ayrıca, maun odununun dağınık traheli ve heteroselüler bir yapıya sahip olduğu yapılan anatomik incelemeler sonucunda ortaya konulmuştur. Kısaca özetlenecek olursa, maun odunu sahip olduğu göz alıcı özellikleri sayesinde ülkemizde kağıt, mobilya, inşaat gibi farklı sektörlerde değerlendirilmesi bakımından oldukça dikkat çekici bir tür olarak karşımıza çıkmaktadır.
- 27 March 2026
- Published by Turkish Journal of Forest Science in TURKISH JOURNAL OF FOREST SCIENCE
- Vol. 10 (1) , 1903483
Maun (Swietenia mahagoni) odununun bazı karakteristik özelliklerinin belirlenmesi
Yenilenebilir bir biyomalzeme olan ahşap, yüksek mekanik dayanımı, işlenebilirliği ve karbon depolama kapasitesi sayesinde sürdürülebilir malzeme teknolojilerinde önemli bir yere sahiptir. Bu kapsamda, ekonomik değeri yüksek tropikal ağaç türlerinin özelliklerinin incelenmesi, sürdürülebilir hammadde kullanımının desteklenmesi ve endüstriyel uygulamalara yönelik potansiyellerinin ortaya konulması açısından önem taşımaktadır. Dayanıklılığı, işlenebilirliği ve estetik görünümüyle öne çıkan maun (Swietenia mahagoni) odunu da bu türler arasında yer almaktadır. Bu çalışmada, ülkemize ticari amaçla ithal edilen maun odununun kimyasal, morfolojik ve anatomik özellikleri araştırılmıştır. Kimyasal analizler TAPPI standartları çerçevesinde gerçekleştirilmiştir. Morfolojik incelemeler öncesinde maun odunu örneklerine nitrik asit maserasyonu uygulanarak lifler ayrıştırılmış, anatomik araştırmalarda ise odun örnekleri küp şekline getirildikten sonra gliserin, etil alkol ve destile su karışımında yumuşayana kadar bekletilmiştir. Maun odununun holoselüloz, alfa selüloz, lignin, ekstraktif madde ve kül içerikleri sırasıyla %76,53; %31,66; %24,88; %6,34 ve %0,48 olarak tespit edilmiştir. %1 NaOH, sıcak su ve soğuk su çözünürlükleri ise sırasıyla %20,04; %8,50 ve %7,41 olarak belirlenmiştir. Yapılan morfolojik incelemeler sonucunda maun odununun lif uzunluğu 1,53 mm; lif genişliği 23,87 µm; lümen genişliği 8,56 µm ve lif çeper kalınlığı 7,65 µm olarak bulunmuştur. Morfolojik veriler ışığında maun odunu liflerinin keçeleşme oranı 64,09; elastikiyet katsayısı 35,86; rijidite katsayısı 32,04; Mühlstep oranı 87,13; Runkel oranı 1,78 ve F faktörü 20000,00 olarak bulunmuştur. Ayrıca, maun odununun dağınık traheli ve heteroselüler bir yapıya sahip olduğu yapılan anatomik incelemeler sonucunda ortaya konulmuştur. Kısaca özetlenecek olursa, maun odunu sahip olduğu göz alıcı özellikleri sayesinde ülkemizde kağıt, mobilya, inşaat gibi farklı sektörlerde değerlendirilmesi bakımından oldukça dikkat çekici bir tür olarak karşımıza çıkmaktadır.
- Open Access
- 6 February 2026
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 27 (1) , 232-241
İran Demir Ağacı (Parrotia persica C.A. Meyer) Odununun Bazı Karakteristik Özelliklerinin Belirlenmesi
İran Demir Ağacı (Parrotia persica C.A. Meyer), dört mevsim boyunca ilgi çekici özellikleriyle bilhassa peyzaj düzenlemelerinde çok değerli bir ağaçtır. Kuraklık ve kentsel kirliliğe toleransı, hastalık ve zararlılara karşı direnci sayesinde bakım gereksinimi düşüktür. Sonbaharda yapraklarının sergilediği renk değişimi ve olgun ağaçlardaki kabuk soyulması, estetik açıdan çekiciliğini artırır. Bu çalışmada, ülkemizde belirli bölgelerde peyzaj ağacı olarak değerlendirilen İran Demir Ağacı odununun bazı kimyasal, morfolojik ve anatomik özellikleri araştırılmıştır. Sonuç olarak, holoselüloz ve alfa selüloz oranları sırasıyla %69.55 ve %46.64 olarak belirlenmişken, diğer önemli bir kimyasal bileşen olan ligninin oranı ise %21.08 olarak saptanmıştır. Morfolojik incelemeler sonucunda, İran Demir Ağacı odunu lif örneklerinin lif uzunluğu 1.15 mm olarak, lif genişliği 22.48 µm ve lümen genişliği 13.99 µm olarak tespit edilmiştir. Ayrıca, İran Demir Ağacı odununun dağınık traheli bir yapı sergilediği, üniseri ve biseri olmak üzere heterojen öz ışınlarına ve merdivenimsi perforasyon tablasına sahip olduğu yapılan anatomik incelemeler sonucunda ortaya konulmuştur. İran Demir Ağacı odunu sahip olduğu iyi karakteristik özellikleri sayesinde ülkemizde peyzaj amaçlı kullanımının yanında, kâğıt, mobilya, inşaat vb. farklı sektörlerde de değerlendirilmesi bakımından oldukça dikkat çekici bir tür olarak karşımıza çıkmaktadır.
- 6 February 2026
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 27 (1) , 232-241
Open Accessİran Demir Ağacı (Parrotia persica C.A. Meyer) Odununun Bazı Karakteristik Özelliklerinin Belirlenmesi
İran Demir Ağacı (Parrotia persica C.A. Meyer), dört mevsim boyunca ilgi çekici özellikleriyle bilhassa peyzaj düzenlemelerinde çok değerli bir ağaçtır. Kuraklık ve kentsel kirliliğe toleransı, hastalık ve zararlılara karşı direnci sayesinde bakım gereksinimi düşüktür. Sonbaharda yapraklarının sergilediği renk değişimi ve olgun ağaçlardaki kabuk soyulması, estetik açıdan çekiciliğini artırır. Bu çalışmada, ülkemizde belirli bölgelerde peyzaj ağacı olarak değerlendirilen İran Demir Ağacı odununun bazı kimyasal, morfolojik ve anatomik özellikleri araştırılmıştır. Sonuç olarak, holoselüloz ve alfa selüloz oranları sırasıyla %69.55 ve %46.64 olarak belirlenmişken, diğer önemli bir kimyasal bileşen olan ligninin oranı ise %21.08 olarak saptanmıştır. Morfolojik incelemeler sonucunda, İran Demir Ağacı odunu lif örneklerinin lif uzunluğu 1.15 mm olarak, lif genişliği 22.48 µm ve lümen genişliği 13.99 µm olarak tespit edilmiştir. Ayrıca, İran Demir Ağacı odununun dağınık traheli bir yapı sergilediği, üniseri ve biseri olmak üzere heterojen öz ışınlarına ve merdivenimsi perforasyon tablasına sahip olduğu yapılan anatomik incelemeler sonucunda ortaya konulmuştur. İran Demir Ağacı odunu sahip olduğu iyi karakteristik özellikleri sayesinde ülkemizde peyzaj amaçlı kullanımının yanında, kâğıt, mobilya, inşaat vb. farklı sektörlerde de değerlendirilmesi bakımından oldukça dikkat çekici bir tür olarak karşımıza çıkmaktadır.
- 1 January 2026
- Published by BioResources in BioResources
- Vol. 21 (1)
Evaluation of waste office paper and waste newsprint as a resource for nanocellulose
Two types of wastepaper and a filter paper as a reference cellulose source were used for nanocellulose production. The production process of cellulose nanofiber (CNF) was conducted via mechanical disintegration following TEMPO oxidation, while the sulfuric acid hydrolysis method was applied for cellulose nanocrystal (CNC) production. The equivalent spherical diameters of CNFs were determined as 1520 nm for waste office paper (OP), 4920 nm for waste newsprint (NP), and 2180 nm for filter paper (FP). In contrast, the equivalent spherical diameters of CNCs were found to be 652 nm for OP, 2110 nm for NP, and 1090 nm for FP. The maximum crystallinity index was established to be 96.9% in the FP-CNC sample. Thermal degradation of raw material and deinked fiber samples for three different paper types occurred between 270 and 390 °C. Thermal degradation of CNF and CNC obtained from these paper types measured in the range of 240 to 360 °C and 140 to 600 °C, respectively. The FTIR analysis revealed chemical bond structures, such as O–H, C–H, C–O, C=O, CH₂, C–C, C–O–C, etc., forming in the raw material, deinked fiber, CNF, and CNC of the samples. Especially considering their crystallinity and thermal properties, it can be said that waste office paper is more suitable for nanocellulose production than waste newsprint.
- 1 January 2026
- Published by BioResources in BioResources
- Vol. 21 (1)
Evaluation of waste office paper and waste newsprint as a resource for nanocellulose
Two types of wastepaper and a filter paper as a reference cellulose source were used for nanocellulose production. The production process of cellulose nanofiber (CNF) was conducted via mechanical disintegration following TEMPO oxidation, while the sulfuric acid hydrolysis method was applied for cellulose nanocrystal (CNC) production. The equivalent spherical diameters of CNFs were determined as 1520 nm for waste office paper (OP), 4920 nm for waste newsprint (NP), and 2180 nm for filter paper (FP). In contrast, the equivalent spherical diameters of CNCs were found to be 652 nm for OP, 2110 nm for NP, and 1090 nm for FP. The maximum crystallinity index was established to be 96.9% in the FP-CNC sample. Thermal degradation of raw material and deinked fiber samples for three different paper types occurred between 270 and 390 °C. Thermal degradation of CNF and CNC obtained from these paper types measured in the range of 240 to 360 °C and 140 to 600 °C, respectively. The FTIR analysis revealed chemical bond structures, such as O–H, C–H, C–O, C=O, CH₂, C–C, C–O–C, etc., forming in the raw material, deinked fiber, CNF, and CNC of the samples. Especially considering their crystallinity and thermal properties, it can be said that waste office paper is more suitable for nanocellulose production than waste newsprint.
- 18 January 2025
- Published by Elsevier in Thin Solid Films
- Vol. 811
Electrochromic properties of tetrabutylammonium perchlorate-doped polypyrrole/ nanocellulose composite films
- 18 January 2025
- Published by Elsevier in Thin Solid Films
- Vol. 811
Electrochromic properties of tetrabutylammonium perchlorate-doped polypyrrole/ nanocellulose composite films
- 19 November 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 40 (1) , 133-147
The effect of nanocellulose to coated paper and recycled paper
This study investigated the properties of paper coated with nanocelluloses and nanocellulose-enhanced recycled paper derived from diverse waste paper sources. The grammages and thicknesses of both coated and recycled paper increased proportionally with the number of coating layers and the concentration of added cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC). While the tensile index and modulus of elasticity of coated paper decreased post-coating, these properties of recycled paper improved with higher CNF concentrations, with minimal changes observed with CNC. The burst strength of coated paper increased with additional coating layers, regardless of whether CNF or CNC was used. The tear index of coated paper surpassed that of the base paper, while the burst strength of recycled paper with CNF exceeded that of CNC. Recycled paper with added nanocellulose exhibited higher tear index values than control paper, with CNF addition notably enhancing tear index compared to CNC. The types of nanocellulose significantly influenced the optical and barrier properties of both coated and recycled paper. In conclusion, this study suggests that leveraging CNF and CNC can enhance the quality of low-grade and recycled paper, potentially opening new avenues for their applications.
- 19 November 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 40 (1) , 133-147
The effect of nanocellulose to coated paper and recycled paper
This study investigated the properties of paper coated with nanocelluloses and nanocellulose-enhanced recycled paper derived from diverse waste paper sources. The grammages and thicknesses of both coated and recycled paper increased proportionally with the number of coating layers and the concentration of added cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC). While the tensile index and modulus of elasticity of coated paper decreased post-coating, these properties of recycled paper improved with higher CNF concentrations, with minimal changes observed with CNC. The burst strength of coated paper increased with additional coating layers, regardless of whether CNF or CNC was used. The tear index of coated paper surpassed that of the base paper, while the burst strength of recycled paper with CNF exceeded that of CNC. Recycled paper with added nanocellulose exhibited higher tear index values than control paper, with CNF addition notably enhancing tear index compared to CNC. The types of nanocellulose significantly influenced the optical and barrier properties of both coated and recycled paper. In conclusion, this study suggests that leveraging CNF and CNC can enhance the quality of low-grade and recycled paper, potentially opening new avenues for their applications.
- 20 July 2023
- Published by Institutul de Chimie Macromoleculara Petru Poni in Cellulose Chemistry and Technology
- Vol. 57 (5-6) , 625-635
EFFECT OF NANOCELLULOSE TYPE AND MATRIX MATERIAL ON PRODUCTION OF NANOCOMPOSITE FILMS
- 20 July 2023
- Published by Institutul de Chimie Macromoleculara Petru Poni in Cellulose Chemistry and Technology
- Vol. 57 (5-6) , 625-635
EFFECT OF NANOCELLULOSE TYPE AND MATRIX MATERIAL ON PRODUCTION OF NANOCOMPOSITE FILMS
- Open Access
- 19 July 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (7) , 1450
Lignocellulosic Bionanomaterials for Biosensor Applications
The rapid population growth, increasing global energy demand, climate change, and excessive use of fossil fuels have adversely affected environmental management and sustainability. Furthermore, the requirements for a safer ecology and environment have necessitated the use of renewable materials, thereby solving the problem of sustainability of resources. In this perspective, lignocellulosic biomass is an attractive natural resource because of its abundance, renewability, recyclability, and low cost. The ever-increasing developments in nanotechnology have opened up new vistas in sensor fabrication such as biosensor design for electronics, communication, automobile, optical products, packaging, textile, biomedical, and tissue engineering. Due to their outstanding properties such as biodegradability, biocompatibility, non-toxicity, improved electrical and thermal conductivity, high physical and mechanical properties, high surface area and catalytic activity, lignocellulosic bionanomaterials including nanocellulose and nanolignin emerge as very promising raw materials to be used in the development of high-impact biosensors. In this article, the use of lignocellulosic bionanomaterials in biosensor applications is reviewed and major challenges and opportunities are identified.
- 19 July 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (7) , 1450
Open AccessLignocellulosic Bionanomaterials for Biosensor Applications
The rapid population growth, increasing global energy demand, climate change, and excessive use of fossil fuels have adversely affected environmental management and sustainability. Furthermore, the requirements for a safer ecology and environment have necessitated the use of renewable materials, thereby solving the problem of sustainability of resources. In this perspective, lignocellulosic biomass is an attractive natural resource because of its abundance, renewability, recyclability, and low cost. The ever-increasing developments in nanotechnology have opened up new vistas in sensor fabrication such as biosensor design for electronics, communication, automobile, optical products, packaging, textile, biomedical, and tissue engineering. Due to their outstanding properties such as biodegradability, biocompatibility, non-toxicity, improved electrical and thermal conductivity, high physical and mechanical properties, high surface area and catalytic activity, lignocellulosic bionanomaterials including nanocellulose and nanolignin emerge as very promising raw materials to be used in the development of high-impact biosensors. In this article, the use of lignocellulosic bionanomaterials in biosensor applications is reviewed and major challenges and opportunities are identified.
- 1 January 2023
- Published by Inderscience Publishers in International Journal of Surface Science and Engineering
- Vol. 1 (1) , 1
CHARACTERIZATION OF SURFACES COATED WITH DIFFERENT NANOCELLULOSE BASED SUSPENSIONS
- 1 January 2023
- Published by Inderscience Publishers in International Journal of Surface Science and Engineering
- Vol. 1 (1) , 1
CHARACTERIZATION OF SURFACES COATED WITH DIFFERENT NANOCELLULOSE BASED SUSPENSIONS
- 30 September 2021
- Published by Institutul de Chimie Macromoleculara Petru Poni in Cellulose Chemistry and Technology
- Vol. 55 (7-8) , 755-770
COMPARISON OF PROPERTIES OF CELLULOSE NANOMATERIALS OBTAINED FROM SUNFLOWER STALKS
- 30 September 2021
- Published by Institutul de Chimie Macromoleculara Petru Poni in Cellulose Chemistry and Technology
- Vol. 55 (7-8) , 755-770
COMPARISON OF PROPERTIES OF CELLULOSE NANOMATERIALS OBTAINED FROM SUNFLOWER STALKS