Cora Bulmău
Research Subjects
Research Interests
Cora Bulmău has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Gabriela Ionescu
Faculty of Energy Engineering, National University of Science and Technology Politehnica Bucharest, Bucharest, Romania
7 shared publications Cosmin Mărculescu
University Politehnica of Bucharest, Department of Energy Production and Use, Splaiul Independenţei 313, Romania
4 shared publicationsGabriela Ionescu
University Politehnica of Bucharest,Department of Energy Production and Use,Bucharest,Romania
4 shared publications- Adrian Volceanov
Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science, Politehnica University of Bucharest, 011061 Bucharest, Romania
3 shared publications Iustina Stanciulescu
Faculty of Power Engineering, University Politehnica of Bucharest, Bucharest, Romania
3 shared publications- Aneta Magdziarz
Department of Heat Engineering & Environment Protection, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland
2 shared publications
Latest Publications
- Open Access
- 5 August 2025
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 27 (12) , 8363-8377
Bio-based material as microwave susceptor and catalyst support for plastic waste microwave-assisted pyrolysis
Worldwide, the waste generated by the food industry sector is expected to increase due to demographic extension and consumer-driven society effect. One type of this waste is represented by animal bone. This study explores the valorization of biochar obtained from chicken bone waste (CBW) pyrolysis at 500–700 °C. The biochar obtained at 700 °C showed better characteristics, such as higher porosity, specific surface area and dielectric proprieties. Further on, the biochar was activated through microwave (MW) treatment to improve its structure and morphology. The activated biochar was investigated as microwave susceptor material and catalyst support for microwave-assisted pyrolysis of low-density polyethylene (LDPE) packaging waste. Compared to common microwave susceptors, the activated biochar proved good microwave absorption capabilities, reaching temperatures of 450 °C. Additionally, the biochar was used as catalyst support, doped with silicon, titanium, and zinc oxides with applications in plastic pyrolysis. As catalyst in microwave-assisted pyrolysis (MAP) of LDPE, it enhanced the gas yield of the process, obtaining a pyro-gas composition rich in hydrogen (43%). These findings prove the dual functionality of the CBW-derived biochar, providing a new sustainable solution for converting chicken bone and plastic waste into value-added products. Graphical abstract
- 5 August 2025
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 27 (12) , 8363-8377
Open AccessBio-based material as microwave susceptor and catalyst support for plastic waste microwave-assisted pyrolysis
Worldwide, the waste generated by the food industry sector is expected to increase due to demographic extension and consumer-driven society effect. One type of this waste is represented by animal bone. This study explores the valorization of biochar obtained from chicken bone waste (CBW) pyrolysis at 500–700 °C. The biochar obtained at 700 °C showed better characteristics, such as higher porosity, specific surface area and dielectric proprieties. Further on, the biochar was activated through microwave (MW) treatment to improve its structure and morphology. The activated biochar was investigated as microwave susceptor material and catalyst support for microwave-assisted pyrolysis of low-density polyethylene (LDPE) packaging waste. Compared to common microwave susceptors, the activated biochar proved good microwave absorption capabilities, reaching temperatures of 450 °C. Additionally, the biochar was used as catalyst support, doped with silicon, titanium, and zinc oxides with applications in plastic pyrolysis. As catalyst in microwave-assisted pyrolysis (MAP) of LDPE, it enhanced the gas yield of the process, obtaining a pyro-gas composition rich in hydrogen (43%). These findings prove the dual functionality of the CBW-derived biochar, providing a new sustainable solution for converting chicken bone and plastic waste into value-added products. Graphical abstract
- Open Access
Thermochemical Conversion of Animal-Derived Waste: A Mini-Review with a Focus on Chicken Bone Waste
Food waste, particularly animal-derived waste, presents a significant challenge globally, prompting the need for sustainable management strategies. In 2022, the amount of food waste per capita reached 131 kg/capita in the EU (European Union), which is why the search for environmentally friendly ways to manage food waste through thermochemical conversion processes has gained momentum in recent years. Animal-derived waste is a good source of organic matter (proteins, lipids, and polysaccharides) and mineral compounds (calcium phosphate, mostly hydroxyapatite). This composition makes animal-derived waste valuable for the extraction of chemical compounds, such as hydroxyapatite (HAp), which constitutes up to 70 wt% of animal bones; keratin; collagen; and hyaluronic acid (HA), to produce pharmaceutical, medical, or industrial by-products. The thermochemical conversion of chicken bones through pyrolysis and gasification creates a new opportunity to valorize this type of waste by reintroducing valuable by-products into the economy and thus achieving sustainable waste management objectives. The results of this study showcase the multiple applications of the pyrolysis of chicken bone waste products (as adsorbents in aqueous mediums, catalysts, fertilizers, and biomedical applications) and the necessity of a better exploration of the gasification process of chicken bone waste. Therefore, this study explores the properties of animal-derived waste and discusses the pyrolysis and gasification of chicken bone waste, the influence of process conditions on product yields, and the catalytic enhancement of these thermochemical processes.
Open AccessThermochemical Conversion of Animal-Derived Waste: A Mini-Review with a Focus on Chicken Bone Waste
Food waste, particularly animal-derived waste, presents a significant challenge globally, prompting the need for sustainable management strategies. In 2022, the amount of food waste per capita reached 131 kg/capita in the EU (European Union), which is why the search for environmentally friendly ways to manage food waste through thermochemical conversion processes has gained momentum in recent years. Animal-derived waste is a good source of organic matter (proteins, lipids, and polysaccharides) and mineral compounds (calcium phosphate, mostly hydroxyapatite). This composition makes animal-derived waste valuable for the extraction of chemical compounds, such as hydroxyapatite (HAp), which constitutes up to 70 wt% of animal bones; keratin; collagen; and hyaluronic acid (HA), to produce pharmaceutical, medical, or industrial by-products. The thermochemical conversion of chicken bones through pyrolysis and gasification creates a new opportunity to valorize this type of waste by reintroducing valuable by-products into the economy and thus achieving sustainable waste management objectives. The results of this study showcase the multiple applications of the pyrolysis of chicken bone waste products (as adsorbents in aqueous mediums, catalysts, fertilizers, and biomedical applications) and the necessity of a better exploration of the gasification process of chicken bone waste. Therefore, this study explores the properties of animal-derived waste and discusses the pyrolysis and gasification of chicken bone waste, the influence of process conditions on product yields, and the catalytic enhancement of these thermochemical processes.
- 19 August 2021
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 44 (6) , 1683-1696
Production and properties assessment of biochars from rapeseed and poplar waste biomass for environmental applications in Romania
Biochar obtained by pyrolysis is receiving great research interest as it is perceived to be a renewable resource available for agronomic and environmental applications. Since biochar is a highly heterogeneous material with chemical composition that varies widely depending on feedstock and pyrolysis conditions, this study compares the characteristics of biochar produced by pyrolysis at six temperature levels ranging between 300 and 800 °C of two types of biomass, i.e. rapeseed straw (RS)—agriculture waste and poplar tree shavings (PP)—forest waste from furniture making. Twelve biochars were generated via pyrolysis under low oxygen conditions of the selected biomasses in an electrically heated batch reactor. To determine how pyrolysis temperature affects the properties of biochars and consequently their possible utilization, physical, chemical, thermal, porosity and EDX analysis were measured for all biochars and for the corresponding feedstocks. SEM images of the biochar revealed that an increase in temperature led to a higher number of pores for PP biochar compared to RS biochar, and that PP biochar pores tended to shrink with temperature. The elemental composition and the pH of biochars were also compared. Based on the experimental results a utilization matrix was designed as to offer indications concerning possible applications of RS and PP biochars in substitution to fossil derived products for soil remediation (e.g., agriculture fertilizers) and in environmental applications (e.g., removal of pollutants). Graphic abstract
- 19 August 2021
- Published by Springer Nature in Environmental Geochemistry and Health
- Vol. 44 (6) , 1683-1696
Production and properties assessment of biochars from rapeseed and poplar waste biomass for environmental applications in Romania
Biochar obtained by pyrolysis is receiving great research interest as it is perceived to be a renewable resource available for agronomic and environmental applications. Since biochar is a highly heterogeneous material with chemical composition that varies widely depending on feedstock and pyrolysis conditions, this study compares the characteristics of biochar produced by pyrolysis at six temperature levels ranging between 300 and 800 °C of two types of biomass, i.e. rapeseed straw (RS)—agriculture waste and poplar tree shavings (PP)—forest waste from furniture making. Twelve biochars were generated via pyrolysis under low oxygen conditions of the selected biomasses in an electrically heated batch reactor. To determine how pyrolysis temperature affects the properties of biochars and consequently their possible utilization, physical, chemical, thermal, porosity and EDX analysis were measured for all biochars and for the corresponding feedstocks. SEM images of the biochar revealed that an increase in temperature led to a higher number of pores for PP biochar compared to RS biochar, and that PP biochar pores tended to shrink with temperature. The elemental composition and the pH of biochars were also compared. Based on the experimental results a utilization matrix was designed as to offer indications concerning possible applications of RS and PP biochars in substitution to fossil derived products for soil remediation (e.g., agriculture fertilizers) and in environmental applications (e.g., removal of pollutants). Graphic abstract
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 529-533
Energy Potential and Properties of Food Court Waste - FCW as Fuel Towards Circular Economy
This paper addresses the topic of food waste management in a circular economy and presents data concerning the significant amount of waste annually generated and the importance of its valorization. The main waste considered here is Food Court Waste generated in the food court areas of malls, shopping centers, airports etc. Its composition, proximate and ultimate analysis, and its heating value are calculated/determined and presented in order to emphasize its properties as a feedstock in thermochemical conversion processes. Due to its composition - paper, cardboard, plastic, organic residues and wood - this waste represents an alternative possible source of green energy, since all its components are already proven as suitable for energy production through thermochemical conversion.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 529-533
Energy Potential and Properties of Food Court Waste - FCW as Fuel Towards Circular Economy
This paper addresses the topic of food waste management in a circular economy and presents data concerning the significant amount of waste annually generated and the importance of its valorization. The main waste considered here is Food Court Waste generated in the food court areas of malls, shopping centers, airports etc. Its composition, proximate and ultimate analysis, and its heating value are calculated/determined and presented in order to emphasize its properties as a feedstock in thermochemical conversion processes. Due to its composition - paper, cardboard, plastic, organic residues and wood - this waste represents an alternative possible source of green energy, since all its components are already proven as suitable for energy production through thermochemical conversion.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 418-422
Comparative analysis of renewable sources for biofuels production
The paper presents an analysis of diverse biomass species concerning their physical-chemical properties as primary source for biofuels production. The study integrates the European framework and developments in the field of biofuels production as well as main thermochemical processes for their production. Biomass properties: physical structure, volatile matter content, fixed carbon, chemical composition and specific energy content were analyzed together with conversion process type to identify the relation between process input data and the reaction products distribution as intermediate substances for biofuels production. The results offer information on wood and agriculture biomass properties linked to pyrolysis reaction products both from quantitative and qualitative perspective.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 418-422
Comparative analysis of renewable sources for biofuels production
The paper presents an analysis of diverse biomass species concerning their physical-chemical properties as primary source for biofuels production. The study integrates the European framework and developments in the field of biofuels production as well as main thermochemical processes for their production. Biomass properties: physical structure, volatile matter content, fixed carbon, chemical composition and specific energy content were analyzed together with conversion process type to identify the relation between process input data and the reaction products distribution as intermediate substances for biofuels production. The results offer information on wood and agriculture biomass properties linked to pyrolysis reaction products both from quantitative and qualitative perspective.
- Open Access
- 21 August 2019
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 290, 11005
Bio-Gaseous Fuels from Agricultural Waste Pyrolysis (Part II)
The results presented in the following paper are making the aim of a broadly research concentrated to investigate the temperature effects on agricultural waste pyrolysis performed in a batch reactor. Briefly, the motivation along with experimental features and main results generated from the rape straw low temperature pyrolysis (300°C-500°C) have been offered in the first part submitted at the MSE 2019 conference, with the title: Bio-gaseous fuels from agricultural waste pyrolysis (Part I). The current section (second part of the study) presents the results obtained in case of the rape straw high temperature pyrolysis (600°C-800°C). Overall, as expected, the augmentation of the operating temperature, inhibits the bio-oil and biochar formation, enhancing the pyrolysis gas production. The distribution of gaseous components varies depending on temperature and residence time. The transition stages and the formation of the main pyrolysis gaseous species are also presented and discussed. The most dominant chemical element from the pyrolysis gas is N2, due to its constant presence as non-oxidant agent in the process. Considering the same premise, the rape straw pyrolysis gaseous species distribution in the temperature range of 600°C-800°C varies between: 47%-58% CO2, 18%-28% CO, 14%-35% H2, while the pyrolysis gas density 1.1-1.4 kg/m3 and higher heating value 23-52 MJ/kg.
- 21 August 2019
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 290, 11005
Open AccessBio-Gaseous Fuels from Agricultural Waste Pyrolysis (Part II)
The results presented in the following paper are making the aim of a broadly research concentrated to investigate the temperature effects on agricultural waste pyrolysis performed in a batch reactor. Briefly, the motivation along with experimental features and main results generated from the rape straw low temperature pyrolysis (300°C-500°C) have been offered in the first part submitted at the MSE 2019 conference, with the title: Bio-gaseous fuels from agricultural waste pyrolysis (Part I). The current section (second part of the study) presents the results obtained in case of the rape straw high temperature pyrolysis (600°C-800°C). Overall, as expected, the augmentation of the operating temperature, inhibits the bio-oil and biochar formation, enhancing the pyrolysis gas production. The distribution of gaseous components varies depending on temperature and residence time. The transition stages and the formation of the main pyrolysis gaseous species are also presented and discussed. The most dominant chemical element from the pyrolysis gas is N2, due to its constant presence as non-oxidant agent in the process. Considering the same premise, the rape straw pyrolysis gaseous species distribution in the temperature range of 600°C-800°C varies between: 47%-58% CO2, 18%-28% CO, 14%-35% H2, while the pyrolysis gas density 1.1-1.4 kg/m3 and higher heating value 23-52 MJ/kg.
- Open Access
- 20 August 2019
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 112, 01018
The initiation stage of Food Court Waste during air versus steam gasification processes
Using different gasification agents: air and steam, two types of gasification process were performed into a batch reactor at temperature of 750°C and 850°C and atmospheric pressure. The only difference between of the two compared experimental configurations was represented by the gasification agent used in the process. The amount of oxygen introduced into the reactor for air gasification at an ER of 0.3 was computed. Therefore, in the steam gasification process, the same amount of oxygen was introduced, so establishing an unordinary steam to biomass ratio. In this way, the two processes, air vs. steam gasification, were compared, the rest of the process parameters being kept constant. This paper approaches the transitory regimes (initiation stage) of gasification process in order to observe the influence of process temperature and gasification agent on the process run. According to the experimental results, better gas quality is obtained if steam is used as a gasifying agent, yet the conversion and energy efficiencies decreases. By optimizing time residence in steam gasification, process efficiencies may be increased.
- 20 August 2019
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 112, 01018
Open AccessThe initiation stage of Food Court Waste during air versus steam gasification processes
Using different gasification agents: air and steam, two types of gasification process were performed into a batch reactor at temperature of 750°C and 850°C and atmospheric pressure. The only difference between of the two compared experimental configurations was represented by the gasification agent used in the process. The amount of oxygen introduced into the reactor for air gasification at an ER of 0.3 was computed. Therefore, in the steam gasification process, the same amount of oxygen was introduced, so establishing an unordinary steam to biomass ratio. In this way, the two processes, air vs. steam gasification, were compared, the rest of the process parameters being kept constant. This paper approaches the transitory regimes (initiation stage) of gasification process in order to observe the influence of process temperature and gasification agent on the process run. According to the experimental results, better gas quality is obtained if steam is used as a gasifying agent, yet the conversion and energy efficiencies decreases. By optimizing time residence in steam gasification, process efficiencies may be increased.
- Open Access
- 20 August 2019
- Published by EDP Sciences
- Vol. 112, 01019
Experimental study of Food Court Waste air gasification process performances in a batch reactor
The paper presents the experimental results of Food Court Waste air gasification using a batch reactor. This type of waste is generated mainly in the food court areas of services spaces, shopping centers, airports and malls and is generally composed of paper & cardboard, plastic, organic, wood, metal and glass waste. The process operating parameters were: temperatures between 650°C and 850°C and an equivalent ratio of 0.25 and 0.4 respectively. The study focused on the influence of process parameters on the energy conversion rate considering the cold gas and hot gas efficiency correlated with the feedstock carbon conversion rate. The recorded instantaneous concentrations of sampled gas species were plotted in time dependent graphs for accurate variation curves of gases concentrations. The results can be used to isolate the startup stage of the gasification process and to establish the optimal process parameters for increased overall energy efficiency. In conclusion, considering the current setup, operational parameters and process energy efficiency, the optimal temperature for the air gasification of Food Court Waste is 850ºC with an equivalent ratio of 0.40.
- 20 August 2019
- Published by EDP Sciences
- Vol. 112, 01019
Open AccessExperimental study of Food Court Waste air gasification process performances in a batch reactor
The paper presents the experimental results of Food Court Waste air gasification using a batch reactor. This type of waste is generated mainly in the food court areas of services spaces, shopping centers, airports and malls and is generally composed of paper & cardboard, plastic, organic, wood, metal and glass waste. The process operating parameters were: temperatures between 650°C and 850°C and an equivalent ratio of 0.25 and 0.4 respectively. The study focused on the influence of process parameters on the energy conversion rate considering the cold gas and hot gas efficiency correlated with the feedstock carbon conversion rate. The recorded instantaneous concentrations of sampled gas species were plotted in time dependent graphs for accurate variation curves of gases concentrations. The results can be used to isolate the startup stage of the gasification process and to establish the optimal process parameters for increased overall energy efficiency. In conclusion, considering the current setup, operational parameters and process energy efficiency, the optimal temperature for the air gasification of Food Court Waste is 850ºC with an equivalent ratio of 0.40.
- Open Access
- 22 February 2019
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 85, 07008
Biomass conversion into valuable products within the integrated management of bio-resources
The present research proposes two scenarios for the biomass conversion into valuable products within the integrated management of bio-resources. The scenarios have been developed considering: the biomass availability, material and by-products characteristics and the comprehensive combination of the primary technologies used for the conversion of the biomass mixtures into energy. In scenario 1 the biomass waste valorisation is made via integrated pyrolysis and combustion treatment, while in scenario 2 the biomass conversion in done considering the integration of the pyrolysis, gasification and combustion treatments into the conversion chain. The results revealed that all analysed scenarios purposed are self-independent from the energetic point of view.
- 22 February 2019
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 85, 07008
Open AccessBiomass conversion into valuable products within the integrated management of bio-resources
The present research proposes two scenarios for the biomass conversion into valuable products within the integrated management of bio-resources. The scenarios have been developed considering: the biomass availability, material and by-products characteristics and the comprehensive combination of the primary technologies used for the conversion of the biomass mixtures into energy. In scenario 1 the biomass waste valorisation is made via integrated pyrolysis and combustion treatment, while in scenario 2 the biomass conversion in done considering the integration of the pyrolysis, gasification and combustion treatments into the conversion chain. The results revealed that all analysed scenarios purposed are self-independent from the energetic point of view.
- Open Access
- 13 February 2019
- Published by IntechOpen
Estimation of Energy Potential for Solid Pyrolysis By-Products Using Analytical Methods
Waste can be converted into energy and value-added products by thermo-chemical processes. Pyrolysis represents the thermal degradation of the material under a non-oxidant atmosphere leading to generation of three products: char—solid, oil—liquid and pyrolysis gas. Pyrolysis process means a complex mechanism of reactions, endothermic and/or exothermic chemical reactions that occurs simultaneously and/or subsequently. The use of lignocellulosic and plastic waste for energy purposes leads to the production of solids that could replace much of the conventional fuels once energy conversion technologies will prove profitable. In this chapter the authors proposed to describe, analyze and apply analytical methods for the heating value estimation of the solid products generated by pyrolysis of different wood and plastic materials. Our results obtained by experimental studies and empirical formulas will be evaluated and compared. The impact of the thermo-chemical process operational conditions on the variation of chars and biochars heating value will be also discussed in this chapter.
- 13 February 2019
- Published by IntechOpen
Open AccessEstimation of Energy Potential for Solid Pyrolysis By-Products Using Analytical Methods
Waste can be converted into energy and value-added products by thermo-chemical processes. Pyrolysis represents the thermal degradation of the material under a non-oxidant atmosphere leading to generation of three products: char—solid, oil—liquid and pyrolysis gas. Pyrolysis process means a complex mechanism of reactions, endothermic and/or exothermic chemical reactions that occurs simultaneously and/or subsequently. The use of lignocellulosic and plastic waste for energy purposes leads to the production of solids that could replace much of the conventional fuels once energy conversion technologies will prove profitable. In this chapter the authors proposed to describe, analyze and apply analytical methods for the heating value estimation of the solid products generated by pyrolysis of different wood and plastic materials. Our results obtained by experimental studies and empirical formulas will be evaluated and compared. The impact of the thermo-chemical process operational conditions on the variation of chars and biochars heating value will be also discussed in this chapter.