Iveta Hájková
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Iveta Hájková has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Karel Dvořák
Faculty of Civil Engineering, Brno University of Technology, Veveri 331/95, 60200 Brno, Czech Republic
14 shared publications - Dominik Gazdič
Brno University of Technology
9 shared publications Marcela Fridrichová
Brno University of Technology
7 shared publicationsRadek Magrla
4 shared publicationsAdam Hubáček
Brno University of Technology
3 shared publicationsDusan Dolak
Brno University of Technology
2 shared publications
Latest Publications
- 26 July 2021
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 321, 177-183
Material Corrosion of Tunnel Fire Protection Boards
This paper concerns the degradation of fire protection boards in the ceiling structure of the 4th tube of Elbtunnel in Hamburg, Germany. During the routine inspection an irregularity in the ceiling material was observed. Based on this inspection five cores were drilled out of the fire protection boards. These samples were examined and analyzed using visual, X-Ray Diffraction analysis (XRD), Differential Thermal Analysis (DTA) and Scanning Electron Microscopy (SEM) images. From the inspection and the analysis of data it was possible to conclude the cause of the material corrosion of the autoclaved calcium silicate fire protection boards.
- 26 July 2021
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 321, 177-183
Material Corrosion of Tunnel Fire Protection Boards
This paper concerns the degradation of fire protection boards in the ceiling structure of the 4th tube of Elbtunnel in Hamburg, Germany. During the routine inspection an irregularity in the ceiling material was observed. Based on this inspection five cores were drilled out of the fire protection boards. These samples were examined and analyzed using visual, X-Ray Diffraction analysis (XRD), Differential Thermal Analysis (DTA) and Scanning Electron Microscopy (SEM) images. From the inspection and the analysis of data it was possible to conclude the cause of the material corrosion of the autoclaved calcium silicate fire protection boards.
- 27 February 2020
- Published by AIP Publishing
- Vol. 2210 (1) , 020008
Methods for assessing the homogeneity of reinforced shielding precast concrete element of heavy weight concrete
The aim of the experimental research was to design a suitable formula of heavy weight concrete for the development of a reinforced concrete shielding element whose density would exceed 3500 kg·m−3. Magnetite was chosen as a suitable aggregate for the shielding of radiation. The prefabricated segment - energy channel with the required wall thickness of 300 mm was concreted from the formula developed in this way. Subsequently, homogeneity was tested on the given element and the multiplicity of attenuation for specific types of emitters (caesium and cobalt) was determined by calculation.
- 27 February 2020
- Published by AIP Publishing
- Vol. 2210 (1) , 020008
Methods for assessing the homogeneity of reinforced shielding precast concrete element of heavy weight concrete
The aim of the experimental research was to design a suitable formula of heavy weight concrete for the development of a reinforced concrete shielding element whose density would exceed 3500 kg·m−3. Magnetite was chosen as a suitable aggregate for the shielding of radiation. The prefabricated segment - energy channel with the required wall thickness of 300 mm was concreted from the formula developed in this way. Subsequently, homogeneity was tested on the given element and the multiplicity of attenuation for specific types of emitters (caesium and cobalt) was determined by calculation.
- 16 August 2019
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 296, 221-225
Alternative Design Options for Preparing Beta Gypsum-Based Gypsum Premix
Up to now, questions related to the preparation of pure sulphate binders, ie anhydrite mortar, alpha gypsum and beta gypsum, have been monitored at laboratory and pilot plant level within the framework of the work carried out at BUT. However, beta gypsum cannot be considered a high-grade sulfate binder. Therefore, the subject of this article is the use of beta gypsum to develop a gypsum premix that can be classified as a mixed sulfate binder universally applicable to the preparation of dry mortar mixtures. [1,2]
- 16 August 2019
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 296, 221-225
Alternative Design Options for Preparing Beta Gypsum-Based Gypsum Premix
Up to now, questions related to the preparation of pure sulphate binders, ie anhydrite mortar, alpha gypsum and beta gypsum, have been monitored at laboratory and pilot plant level within the framework of the work carried out at BUT. However, beta gypsum cannot be considered a high-grade sulfate binder. Therefore, the subject of this article is the use of beta gypsum to develop a gypsum premix that can be classified as a mixed sulfate binder universally applicable to the preparation of dry mortar mixtures. [1,2]
- 21 June 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 808, 88-92
Optimizing Composition of Gypsum Mixture for Preparation and Testing of Partition Blocks
Gypsum, or sulphate, binders are inorganic powder binders, which are among the so-called aerial mortars. These, after mixing with water, form a material that is well-workable for a certain time, which solidifies, hardens and is stable only in the air. Gypsum as a building material is formed by heating a raw material called plaster stone - CaSO4·2H2O and can acquire various properties depending on how it is produced. Its resulting properties can be affected to some extent by the source from which the raw material for its production is obtained, whether it is plaster stone or whether it the source is a secondary product from industrial production. [1] Production and use result from the ability of the original raw material to release crystalline-bound water under elevated temperatures and to bind it again after it has been added thus recreating a solid structure.
- 21 June 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 808, 88-92
Optimizing Composition of Gypsum Mixture for Preparation and Testing of Partition Blocks
Gypsum, or sulphate, binders are inorganic powder binders, which are among the so-called aerial mortars. These, after mixing with water, form a material that is well-workable for a certain time, which solidifies, hardens and is stable only in the air. Gypsum as a building material is formed by heating a raw material called plaster stone - CaSO4·2H2O and can acquire various properties depending on how it is produced. Its resulting properties can be affected to some extent by the source from which the raw material for its production is obtained, whether it is plaster stone or whether it the source is a secondary product from industrial production. [1] Production and use result from the ability of the original raw material to release crystalline-bound water under elevated temperatures and to bind it again after it has been added thus recreating a solid structure.
- 20 June 2018
- Published by Trans Tech Publications, Ltd.
Binders, Materials and Technologies in Modern Construction IV
The 16th International Conference Silicate Binders 2017 (ICBM 2017) was organized with the support from Brno University of Technology. The most important topics on the conference were the chemistry and technology of cement and other hydraulic and silicate binders, chemistry and technology of lime production and gypsum based binders. Special attention was paid to the use and behaviour of these mentioned binders in the various kinds of building materials, like concrete, inorganic insulations and in solidified sludges.
- 20 June 2018
- Published by Trans Tech Publications, Ltd.
Binders, Materials and Technologies in Modern Construction IV
The 16th International Conference Silicate Binders 2017 (ICBM 2017) was organized with the support from Brno University of Technology. The most important topics on the conference were the chemistry and technology of cement and other hydraulic and silicate binders, chemistry and technology of lime production and gypsum based binders. Special attention was paid to the use and behaviour of these mentioned binders in the various kinds of building materials, like concrete, inorganic insulations and in solidified sludges.
- 20 June 2018
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 276, 236-241
Modification of Technological Properties of Laboratory Premixes
Sulfur binders belong to the group of airbrushes. They can therefore only harden and harden in the air. The main raw material, gypsum, can be mined in several places in the world. Even in the Czech Republic there is a deposit of natural gypsum in Kobeřice u Opavy. [5] In spite of this fact, we use mostly industrially produced gypsies, because the natural gypsum deposit has only very limited capacity. The Energogypsum, produced in the Czech Republic by ČEZ Energetické Produkty s.r.o., is the waste product of flue gas desulphurization using the wet limestone scrubbing method. Like the chemosynthesis, it is characterized by its high purity (the content of pure CaSO4 2 H2O is at least 90%). The one in the Czech Republic is manufactured by Precheza, a.s. in Přerov. The use of sulphate binders is varied. A better form in the form of alpha plaster is used to produce self-leveling floors and dentistry. Less-quality beta gypsum has a larger application. From it we can produce both gypsum and monolithic partitions. We can also use it for the production of plasterboard and gypsum fiber boards and, last but not least, as internal plasters for its good fire performance. [1] Plasters are being prepared today in two different ways. Firstly, they are still prepared in the original outpatient way directly on the building from individual raw materials, but they are also industrially produced in the form of dry mortar mixtures, which are mixed on the building only with water. The second way is more progressive with the fact that nowadays it is even more widespread. For many builders, however, it remains financially scarce. That is why we have recently begun to find a compromise solution that will satisfy both the technical and the economic ones. This is the development of the so-called binder premixes, ie the industrially produced mixed binder, which is mixed only with sand and water on the site. The situation on our market shows that the recently developed special premix for lime-cement plaster and mortar mixtures is very positive for the building public and therefore the effort is to generalize this mixed mortar in the production raw material base and, in addition, to develop its analogue based on sulphate binder. [2]
- 20 June 2018
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 276, 236-241
Modification of Technological Properties of Laboratory Premixes
Sulfur binders belong to the group of airbrushes. They can therefore only harden and harden in the air. The main raw material, gypsum, can be mined in several places in the world. Even in the Czech Republic there is a deposit of natural gypsum in Kobeřice u Opavy. [5] In spite of this fact, we use mostly industrially produced gypsies, because the natural gypsum deposit has only very limited capacity. The Energogypsum, produced in the Czech Republic by ČEZ Energetické Produkty s.r.o., is the waste product of flue gas desulphurization using the wet limestone scrubbing method. Like the chemosynthesis, it is characterized by its high purity (the content of pure CaSO4 2 H2O is at least 90%). The one in the Czech Republic is manufactured by Precheza, a.s. in Přerov. The use of sulphate binders is varied. A better form in the form of alpha plaster is used to produce self-leveling floors and dentistry. Less-quality beta gypsum has a larger application. From it we can produce both gypsum and monolithic partitions. We can also use it for the production of plasterboard and gypsum fiber boards and, last but not least, as internal plasters for its good fire performance. [1] Plasters are being prepared today in two different ways. Firstly, they are still prepared in the original outpatient way directly on the building from individual raw materials, but they are also industrially produced in the form of dry mortar mixtures, which are mixed on the building only with water. The second way is more progressive with the fact that nowadays it is even more widespread. For many builders, however, it remains financially scarce. That is why we have recently begun to find a compromise solution that will satisfy both the technical and the economic ones. This is the development of the so-called binder premixes, ie the industrially produced mixed binder, which is mixed only with sand and water on the site. The situation on our market shows that the recently developed special premix for lime-cement plaster and mortar mixtures is very positive for the building public and therefore the effort is to generalize this mixed mortar in the production raw material base and, in addition, to develop its analogue based on sulphate binder. [2]
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 908, 159-163
Properties of Vibro Compacted and Pressed Concrete Products with Varnished Surface
Technology of so-called vibro compacted pressed concrete is currently used inter alia for manufacture of concrete products like concrete paving blocks, slabs, curbs or walling elements. Particularly wear layers of products for paving have recently been improved by special methods and technologies. The paper summarizes current knowledge of vibro compacted pressed concrete products with surface finish treated with hardened varnish. Main focus is on description of individual methods of finalizing wear layers of such products.
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 908, 159-163
Properties of Vibro Compacted and Pressed Concrete Products with Varnished Surface
Technology of so-called vibro compacted pressed concrete is currently used inter alia for manufacture of concrete products like concrete paving blocks, slabs, curbs or walling elements. Particularly wear layers of products for paving have recently been improved by special methods and technologies. The paper summarizes current knowledge of vibro compacted pressed concrete products with surface finish treated with hardened varnish. Main focus is on description of individual methods of finalizing wear layers of such products.
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 908, 154-158
Water-Tight Concrete Constructions and Directives for their Design and Realization
The paper describes problems of water-tight concrete constructions, their design, manufacture and testing of quality in accordance with regulations and directives used in the Czech Republic and abroad. Current knowledge of water-tight constructions and water-tight concrete imply that main focus is on problems of use of water-tight concrete for construction of so-called white bath and preventing crack formation in concrete. Laboratory work is focused mainly on design of concrete based on individual regulations. Subsequently, influence of various types of cement and additions partly replacing cement on properties of water-tight concrete is examined. Research of heat development during hydration at early stages of maturing is and inseparable part of the experimental work, as well as development of compressive strength, water-tightness and frost resistance of concrete
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 908, 154-158
Water-Tight Concrete Constructions and Directives for their Design and Realization
The paper describes problems of water-tight concrete constructions, their design, manufacture and testing of quality in accordance with regulations and directives used in the Czech Republic and abroad. Current knowledge of water-tight constructions and water-tight concrete imply that main focus is on problems of use of water-tight concrete for construction of so-called white bath and preventing crack formation in concrete. Laboratory work is focused mainly on design of concrete based on individual regulations. Subsequently, influence of various types of cement and additions partly replacing cement on properties of water-tight concrete is examined. Research of heat development during hydration at early stages of maturing is and inseparable part of the experimental work, as well as development of compressive strength, water-tightness and frost resistance of concrete
- 17 July 2017
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 902, 14-19
Quality Evaluation System for Description of Recycled Concrete Aggregates and Verification of its Functionality
Article presents quality evaluation system for description of recycled concrete aggregates (RCA), verification of RCA properties and subsequent application in to concrete mixtures as a partial or total replacement of natural aggregates (NA). Modernization and rehabilitation of constructions is accompanied by creation of demolition waste from old buildings and structures. The necessity of recycling is unavoidable, because volume of construction and demolition waste (C&DW) is increasing and the landfills are reaching their maximum capacity. Nowadays, there are numerous research teams focused on analysis of characteristics and application of RCA into new concrete as a replacement of NA. Test samples of RCA have always different source, grain composition and other physical and mechanical properties, which are variously described in each different paper. Up to now, there is no any uniform quality evaluation system for description of recycled concrete aggregates, which can easily describe their source and assumed properties. Our aim is to set up rules for description of RCA and simplify the evaluation of properties of various RCA. Qualification system will be applied on three different samples of RCA and verified by the selected properties tests. Tested samples of RCA will be than used as a replacement of natural aggregates in concrete mixtures. The replacement amount was set up on 20%, 40% and 100% according to the reviewed literature, to have a comparable replacement amount and valuable results for discussion. The results of RCA testing and testing of concrete with partial and total replacement of NA showed that the evaluation system is working properly. It can be concluded, that accuracy of the quality evaluation system for description of recycled concrete aggregates is sufficient, but more tests on RCA should be done to prove all connections in between description of RCA and their properties.
- 17 July 2017
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 902, 14-19
Quality Evaluation System for Description of Recycled Concrete Aggregates and Verification of its Functionality
Article presents quality evaluation system for description of recycled concrete aggregates (RCA), verification of RCA properties and subsequent application in to concrete mixtures as a partial or total replacement of natural aggregates (NA). Modernization and rehabilitation of constructions is accompanied by creation of demolition waste from old buildings and structures. The necessity of recycling is unavoidable, because volume of construction and demolition waste (C&DW) is increasing and the landfills are reaching their maximum capacity. Nowadays, there are numerous research teams focused on analysis of characteristics and application of RCA into new concrete as a replacement of NA. Test samples of RCA have always different source, grain composition and other physical and mechanical properties, which are variously described in each different paper. Up to now, there is no any uniform quality evaluation system for description of recycled concrete aggregates, which can easily describe their source and assumed properties. Our aim is to set up rules for description of RCA and simplify the evaluation of properties of various RCA. Qualification system will be applied on three different samples of RCA and verified by the selected properties tests. Tested samples of RCA will be than used as a replacement of natural aggregates in concrete mixtures. The replacement amount was set up on 20%, 40% and 100% according to the reviewed literature, to have a comparable replacement amount and valuable results for discussion. The results of RCA testing and testing of concrete with partial and total replacement of NA showed that the evaluation system is working properly. It can be concluded, that accuracy of the quality evaluation system for description of recycled concrete aggregates is sufficient, but more tests on RCA should be done to prove all connections in between description of RCA and their properties.
- 1 December 2016
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 722, 157-162
Nanosilica Activated High Volume Fly Ash Concrete: Effects on Selected Properties
By volume, there is no other material used as much as concrete. Its mechanical properties, durability and favorable price makes concrete the perfect construction material. In last few decades, we are seeing a growing trend of partial Portland cement’s replacement with secondary raw materials, most commonly with fly ash. So-called high volume fly ash (HVFA) concretes usually contains over 50% of it. While HVFA concrete’s long-term properties and price are improved over the classical one, its early age properties are often affected negatively. Here, a highly reactive pozzolans enters the scene. Materials like microsilica and metakaolin are known to accelerate concrete’s strength development and improve early age characteristics. In this paper, nanosilica is used for this purpose. These SiO2 nanoparticles possesses a much higher surface area and thus reactivity. Three mixtures with 0, 40 a 60% portland cement’s replacement with fly ash were prepared and tested with and without addition of small amount of nanosilica. Effects on compressive strength, static and dynamic moduli of elasticity and resistivity against water pressure were observed. Results clearly demonstrates that even with dosage in the range of tenths of percent, nanosilica can significantly improve concrete’s properties.
- 1 December 2016
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 722, 157-162
Nanosilica Activated High Volume Fly Ash Concrete: Effects on Selected Properties
By volume, there is no other material used as much as concrete. Its mechanical properties, durability and favorable price makes concrete the perfect construction material. In last few decades, we are seeing a growing trend of partial Portland cement’s replacement with secondary raw materials, most commonly with fly ash. So-called high volume fly ash (HVFA) concretes usually contains over 50% of it. While HVFA concrete’s long-term properties and price are improved over the classical one, its early age properties are often affected negatively. Here, a highly reactive pozzolans enters the scene. Materials like microsilica and metakaolin are known to accelerate concrete’s strength development and improve early age characteristics. In this paper, nanosilica is used for this purpose. These SiO2 nanoparticles possesses a much higher surface area and thus reactivity. Three mixtures with 0, 40 a 60% portland cement’s replacement with fly ash were prepared and tested with and without addition of small amount of nanosilica. Effects on compressive strength, static and dynamic moduli of elasticity and resistivity against water pressure were observed. Results clearly demonstrates that even with dosage in the range of tenths of percent, nanosilica can significantly improve concrete’s properties.