Thanh-Hoang Phan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Thanh-Hoang Phan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Warn-Gyu Park
School of Mechanical Engineering, Pusan National University, Busan, Korea
21 shared publications - Ould el Moctar
Chair of Autonomous and Energy Efficient Maritime Technologies, Technische Universität Berlin, Berlin, Germany
16 shared publications - Van-Tu Nguyen
School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
14 shared publications Warn-Gyu Park
9 shared publications- Trong-Nguyen Duy
School of Mechanical Engineering, Pusan National University 1 , Busan 46241, Republic of Korea
5 shared publications - Chirag Rajan Kharangate
Boiling and Two-Phase Flow Laboratory (BTPFL), School of Mechanical Engineering, Purdue University, 585 Purdue Mall, West Lafayette, IN 47907, USA
3 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 270
Correlation-informed neural networks for predicting flow boiling heat transfer coefficient in mini/micro-channels
- 10 July 2026
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 270
Open AccessCorrelation-informed neural networks for predicting flow boiling heat transfer coefficient in mini/micro-channels
- Open Access
- 2 May 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 247
A continuous-heat-flux phase change model for simulating realistic two-phase unsaturated evaporation processes
- 2 May 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 247
Open AccessA continuous-heat-flux phase change model for simulating realistic two-phase unsaturated evaporation processes
- Open Access
- 25 April 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 247
Capturing interfacial phase change and flow physics during vertical downflow condensation
- 25 April 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 247
Open AccessCapturing interfacial phase change and flow physics during vertical downflow condensation
- 6 January 2025
- Published by Elsevier in Ocean Engineering
- Vol. 319
Effects of free surface on dynamics of a laser-induced cavitation bubble near horizontal rigid wall
- 6 January 2025
- Published by Elsevier in Ocean Engineering
- Vol. 319
Effects of free surface on dynamics of a laser-induced cavitation bubble near horizontal rigid wall
- 6 August 2024
- Published by Elsevier in Ocean Engineering
- Vol. 311
Dynamics of a single cavitation bubble near a cylindrical blind hole
- 6 August 2024
- Published by Elsevier in Ocean Engineering
- Vol. 311
Dynamics of a single cavitation bubble near a cylindrical blind hole
- Open Access
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Numerical study on laser-induced cavitation bubble dynamics inside a millimetric droplet
In this study, complicated nonlinear interactions of a single laser-induced cavitation bubble inside a millimetric water droplet were numerically investigated using a fully compressible three-phase homogeneous model. A general condensation phase-change model and high-resolution interface-capturing schemes were adopted to accurately predict the bubble collapsing and rebound stages as well as strongly deformable droplet interface evolutions. The numerical model was validated using experimental data in terms of the equivalent bubble radius until the second collapse stage, and good quantitative agreement was achieved. The variation in the droplet surface velocity was detected and could better reveal the mechanism underlying the complicated bubbles and droplet interactions, particularly in droplet surface splash dynamics. Subsequently, the complex bubble–droplet interaction phenomena were studied by investigating the ratio of the maximum bubble radius to the initial droplet radius. The numerical results show that the bubble collapsing time decreases monotonically with an increase in the bubble–droplet radius ratio. The droplet surface instabilities became more dominant as the radius ratio increased. In addition, four distinct patterns of droplet motion, namely, stable, multi-spike, ventilating jet, and splashing phenomena, were captured. Finally, the specific mechanisms leading to droplet surface jetting were identified.
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Open AccessNumerical study on laser-induced cavitation bubble dynamics inside a millimetric droplet
In this study, complicated nonlinear interactions of a single laser-induced cavitation bubble inside a millimetric water droplet were numerically investigated using a fully compressible three-phase homogeneous model. A general condensation phase-change model and high-resolution interface-capturing schemes were adopted to accurately predict the bubble collapsing and rebound stages as well as strongly deformable droplet interface evolutions. The numerical model was validated using experimental data in terms of the equivalent bubble radius until the second collapse stage, and good quantitative agreement was achieved. The variation in the droplet surface velocity was detected and could better reveal the mechanism underlying the complicated bubbles and droplet interactions, particularly in droplet surface splash dynamics. Subsequently, the complex bubble–droplet interaction phenomena were studied by investigating the ratio of the maximum bubble radius to the initial droplet radius. The numerical results show that the bubble collapsing time decreases monotonically with an increase in the bubble–droplet radius ratio. The droplet surface instabilities became more dominant as the radius ratio increased. In addition, four distinct patterns of droplet motion, namely, stable, multi-spike, ventilating jet, and splashing phenomena, were captured. Finally, the specific mechanisms leading to droplet surface jetting were identified.
- Open Access
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Modeling of shock wave produced by collapse of cavitation bubble using a fully conservative multiphase model
In this study, we extensively validated the applicability of the fully conservative compressible multiphase flow model to simulate the collapse of cavitation bubbles. The mathematical model is fully conservative, which is crucial for accurately modeling the strong shock phenomena induced via bubble collapse. The numerical method accounts for compressibility and mass transfer with phase-change transitions. A high-resolution shock-capturing finite-volume method and an accurate Riemann solver were employed to capture the strong shocks produced by bubble collapse. A grid-resolution study and validation were performed to ensure the convergence and consistency of the numerical method. This study focused on analyzing the shock waves generated during the collapse as well as the dynamics of bubble collapse and rebound. Quantitative comparisons between the simulation results and experimental data as well as the reference results revealed a high level of agreement. The investigation focused on the impact of various factors, including the bubble radius, phase change, and liquid pressure, on the collapse and rebound of the cavitation bubble, as well as the resulting shock waves. These analyses yielded valuable insight into the complex behavior of cavitation bubbles that collapse in a free field.
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Open AccessModeling of shock wave produced by collapse of cavitation bubble using a fully conservative multiphase model
In this study, we extensively validated the applicability of the fully conservative compressible multiphase flow model to simulate the collapse of cavitation bubbles. The mathematical model is fully conservative, which is crucial for accurately modeling the strong shock phenomena induced via bubble collapse. The numerical method accounts for compressibility and mass transfer with phase-change transitions. A high-resolution shock-capturing finite-volume method and an accurate Riemann solver were employed to capture the strong shocks produced by bubble collapse. A grid-resolution study and validation were performed to ensure the convergence and consistency of the numerical method. This study focused on analyzing the shock waves generated during the collapse as well as the dynamics of bubble collapse and rebound. Quantitative comparisons between the simulation results and experimental data as well as the reference results revealed a high level of agreement. The investigation focused on the impact of various factors, including the bubble radius, phase change, and liquid pressure, on the collapse and rebound of the cavitation bubble, as well as the resulting shock waves. These analyses yielded valuable insight into the complex behavior of cavitation bubbles that collapse in a free field.
- 1 January 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (1)
Numerical study of dynamics of cavitation bubble collapse near oscillating walls
This paper presents a numerical study of the dynamics of an initially spherical bubble collapse near an oscillating rigid wall with a large amplitude; the wall oscillating amplitude is greater than 1% of the initial maximum bubble radius. Numerical simulations were conducted using a compressible two-phase flow model and the volume of fluid (VOF) interphase-sharpening technique on a general curvilinear moving grid. The numerical results for bubbles in the free field and near a wall were computed and compared with published experimental data. To study the effects of the oscillating wall on bubble collapse, a sinusoidal function was used for wall oscillation. The initial bubble conditions were set as a Rayleigh bubble located above the rigid wall at a dimensionless bubble-boundary distance with initial phases of 0{degree sign} and 180{degree sign}. During bubble collapse, the interface deformation, jetting behavior, bubble collapse time, and bubble migration were determined. Violent collapse of the bubble, jetting behavior, and shock propagation from the significant effects of the oscillating wall were observed in simulation cases with different wall motions. The effects of the non-dimensional amplitude scale and non-dimensional period timescale were considered with the initial phases in the problem. The trend lines of typical characteristics and critical points of bubble collapse were determined.
- 1 January 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (1)
Numerical study of dynamics of cavitation bubble collapse near oscillating walls
This paper presents a numerical study of the dynamics of an initially spherical bubble collapse near an oscillating rigid wall with a large amplitude; the wall oscillating amplitude is greater than 1% of the initial maximum bubble radius. Numerical simulations were conducted using a compressible two-phase flow model and the volume of fluid (VOF) interphase-sharpening technique on a general curvilinear moving grid. The numerical results for bubbles in the free field and near a wall were computed and compared with published experimental data. To study the effects of the oscillating wall on bubble collapse, a sinusoidal function was used for wall oscillation. The initial bubble conditions were set as a Rayleigh bubble located above the rigid wall at a dimensionless bubble-boundary distance with initial phases of 0{degree sign} and 180{degree sign}. During bubble collapse, the interface deformation, jetting behavior, bubble collapse time, and bubble migration were determined. Violent collapse of the bubble, jetting behavior, and shock propagation from the significant effects of the oscillating wall were observed in simulation cases with different wall motions. The effects of the non-dimensional amplitude scale and non-dimensional period timescale were considered with the initial phases in the problem. The trend lines of typical characteristics and critical points of bubble collapse were determined.
- Open Access
Prediction of Unstable Hydrodynamic Forces on Submerged Structures under the Water Surface Using a Data-Driven Modeling Approach
Catastrophic failures of partially or fully submerged structures, e.g., offshore platforms, hydrokinetic turbine blades, bridge decks, etc., due to the dynamic impact of free surface flows such as waves or floods have revealed the need to evaluate their reliability. In this respect, an accurate estimation of hydrodynamic forces and their relationship to instability in structures is required. The computational fluid dynamics (CFD) solver is known as a powerful tool to identify dynamic characteristics of flow; however, it commonly consumes a huge computational cost, especially in cases of re-simulations needed. In this paper, an efficient surrogate model based on the Gaussian process is developed to rapidly predict the nonlinear hydrodynamic pressure coefficients on submerged bodies near the water surface. For this purpose, a CFD model is first developed, which is based on a two-dimensional incompressible Navier–Stokes solver incorporating free surface treatment and turbulent flow models. Then, an experimental design is adopted to generate initial training samples considering the effect of the submerged body shape ratio and flow Re number. Surrogate models of hydrodynamic pressure coefficients and their instability based on Gaussian process modeling are established using the outcome from the CFD simulations, where optimal trend and correlation functions are also investigated. Once surrogate models are obtained, the mean and oscillation amplitudes of hydrodynamic pressure coefficients on a submerged rectangular body, which represents the shape of most civil structures, can be rapidly predicted without the attempt at re-simulation. The findings can be practically applied in rapidly assessing hydrodynamic forces and their instability of existing submerged civil structures or in designing new structures, where a suitable shape ratio should be adopted to avoid flow-induced instability of hydrodynamic forces.
Open AccessPrediction of Unstable Hydrodynamic Forces on Submerged Structures under the Water Surface Using a Data-Driven Modeling Approach
Catastrophic failures of partially or fully submerged structures, e.g., offshore platforms, hydrokinetic turbine blades, bridge decks, etc., due to the dynamic impact of free surface flows such as waves or floods have revealed the need to evaluate their reliability. In this respect, an accurate estimation of hydrodynamic forces and their relationship to instability in structures is required. The computational fluid dynamics (CFD) solver is known as a powerful tool to identify dynamic characteristics of flow; however, it commonly consumes a huge computational cost, especially in cases of re-simulations needed. In this paper, an efficient surrogate model based on the Gaussian process is developed to rapidly predict the nonlinear hydrodynamic pressure coefficients on submerged bodies near the water surface. For this purpose, a CFD model is first developed, which is based on a two-dimensional incompressible Navier–Stokes solver incorporating free surface treatment and turbulent flow models. Then, an experimental design is adopted to generate initial training samples considering the effect of the submerged body shape ratio and flow Re number. Surrogate models of hydrodynamic pressure coefficients and their instability based on Gaussian process modeling are established using the outcome from the CFD simulations, where optimal trend and correlation functions are also investigated. Once surrogate models are obtained, the mean and oscillation amplitudes of hydrodynamic pressure coefficients on a submerged rectangular body, which represents the shape of most civil structures, can be rapidly predicted without the attempt at re-simulation. The findings can be practically applied in rapidly assessing hydrodynamic forces and their instability of existing submerged civil structures or in designing new structures, where a suitable shape ratio should be adopted to avoid flow-induced instability of hydrodynamic forces.
- 7 September 2022
- Published by Elsevier in Ocean Engineering
- Vol. 263
Unsteady cavitation around submerged and water-exit projectiles under the effect of the free surface: A numerical study
- 7 September 2022
- Published by Elsevier in Ocean Engineering
- Vol. 263
Unsteady cavitation around submerged and water-exit projectiles under the effect of the free surface: A numerical study