NWNicholas A. White

Nicholas A. White

*This is an algorithmically generated author record based on publicly available information.

Nicholas A. White has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • FOCUS Headform Testing Used to Evaluate Head Injury Risk for Ejected Riders of Personal Watercraft

    by Chimba Mkandawire, Eric S. Winkel, Nicholas A. White, Edward Schatz

    Operators of personal watercraft (PWC) can perform maneuvers that may result in riders separating from the moving watercraft; the tested hypothesis was whether substantial brain injury concurrent with substantial facial and skull fractures can occur from contact with the PWC during a fall. The present study reports the potential for AIS2+ facial/skull fractures and AIS2+ traumatic brain injury (TBI) during a generic fall from the PWC in the absence of wave-jumping or other aggressive maneuvers. While it is well known that PWC can be used for wave-jumping which can result in more severe impacts, such impacts are beyond the scope of the present study because of the wide variability in occupant and PWC kinematics and possible impact velocities and orientations. Passenger separation and fall kinematics from both seated and standing positions were analyzed to estimate head impact velocities and possible impact locations on the PWC. A special purpose headform, known as the Facial and Ocular CountermeasUre Safety (FOCUS) device was used to evaluate the potential for facial fractures, skull fractures and TBI. Impacts between the FOCUS headform and the PWC were performed at velocities of 8, 10, and 12 miles per hour at 5 locations near the stern of a PWC. This study reports impact forces for various facial areas, linear and angular head accelerations, and Head Injury Criteria (HIC). The risk for facial fracture and TBI are reported herein. The results of this study indicate that concurrent AIS2 facial fractures, AIS2+ skull fractures, and AIS2+ TBI do not occur during a simple fall from a PWC.

  • Effects of cervical arthroplasty on neck response during a simulated rotary-wing aircraft impact

    by Nicholas A. White, Kerry A. Danelson, F. Scott Gayzik, Wesley Hsu, Alexander Powers, Joel D. Stitzel

    A computational finite element analysis was performed to evaluate the effects of C5-6 cervical total disc replacement (CTDR) on cross-sectional neck loading and cervical spine kinematics during a simulated rotary-wing aircraft ground impact. The neck of a human body finite element model was modified to include a C5-6 interbody arthroplasty with either a Prestige ST or ProDisc-C CTDR. The adjacent-level, cross-sectional loading for the C5-6 segment was not greatly altered by the CTDRs, as indicated by CORrelation and Analysis (CORA) ratings of 0.988 for the Prestige ST and 0.909 for the ProDisc-C. The CTDRs increased the interbody range of motion, altering both the interbody and cervical facet loading. While the facet capsules experienced increased tension in both CTDR simulations, established injury threshold levels were not reached. Overall, cervical arthroplasty at the C5-6 level did not appear to have a deleterious effect on the dynamic neck response during a simulated rotary-wing aircraft impact.


  • Regional Level Crash Induced Injury Metrics Implemented within THUMS v4.01

    by Logan Miller, James Gaewsky, Ashley Weaver, Joel Stitzel, Nicholas White

    Crash reconstructions using finite element (FE) vehicle and human body models (HBMs) allow researchers to investigate injury mechanisms, predict injury risk, and evaluate the effectiveness of injury mitigation systems, ultimately leading to a reduced risk of fatal and severe injury in motor vehicle crashes (MVCs). To predict injuries, regional-level injury metrics were implemented into the Total Human Model for Safety (THUMS) full body HBM. THUMS was virtually instrumented with cross-sectional planes to measure forces and moments in the femurs, upper and lower tibias, ankles, pelvis (pubic symphysis, ilium, ischium, sacrum, ischial tuberosity, and inferior and superior pubic ramus), and the cervical, thoracic, and lumbar vertebrae and intervertebral discs. To measure accelerations, virtual accelerometers were implemented in the head, thoracic vertebrae, sternum, ribs, and pelvis. Three chest bands and an abdominal band were implemented to measure chest and abdominal deflection. Organ injury is assessed with volumetric strain-based metrics in the lung, liver, and spleen. The kinematic and kinetic data described were batch-processed using a custom-built program known as the Injury Prediction Post-Processor (IPPP) to evaluate common injury metrics and risk probabilities from literature. A total of 30 injury metrics are currently implemented in the IPPP, including Head Injury Criterion (HIC), Combined Thoracic Index (CTI), and cross-sectional forces and moments. We have observed improved ability and accuracy in predicting real-world injury using stress and strain analysis compared to traditionally employed criteria for anthropomorphic test devices (ATDs).


  • Head and Neck Response of a Finite Element Anthropomorphic Test Device and Human Body Model During a Simulated Rotary-Wing Aircraft Impact

    by Nicholas A. White, Kerry A. Danelson, F. Scott Gayzik, Joel D. Stitzel

    A finite element (FE) simulation environment has been developed to investigate aviator head and neck response during a simulated rotary-wing aircraft impact using both an FE anthropomorphic test device (ATD) and an FE human body model. The head and neck response of the ATD simulation was successfully validated against an experimental sled test. The majority of the head and neck transducer time histories received a CORrelation and Analysis (CORA) rating of 0.7 or higher, indicating good overall correlation. The human body model simulation produced a more biofidelic head and neck response than the ATD experimental test and simulation, including change in neck curvature. While only the upper and lower neck loading can be measured in the ATD, the shear force, axial force, and bending moment were reported for each level of the cervical spine in the human body model using a novel technique involving cross sections. This loading distribution provides further insight into the biomechanical response of the neck during a rotary-wing aircraft impact.


  • Effects of cervical arthrodesis and arthroplasty on neck response during a simulated frontal automobile collision

    by Nicholas A. White, Daniel P. Moreno, Philip J. Brown, F. Scott Gayzik, Wesley Hsu, Alexander K. Powers, Joel D. Stitzel


  • Cross-sectional neck response of a total human body FE model during simulated frontal and side automobile impacts

    by Nicholas A. White, Daniel P. Moreno, F. Scott Gayzik, Joel D. Stitzel

    Human body finite element (FE) models are beginning to play a more prevalent role in the advancement of automotive safety. A methodology has been developed to evaluate neck response at multiple levels in a human body FE model during simulated automotive impacts. Three different impact scenarios were simulated: a frontal impact of a belted driver with airbag deployment, a frontal impact of a belted passenger without airbag deployment and an unbelted side impact sled test. Cross sections were created at each vertebral level of the cervical spine to calculate the force and moment contributions of different anatomical components of the neck. Adjacent level axial force ratios varied between 0.74 and 1.11 and adjacent level bending moment ratios between 0.55 and 1.15. The present technique is ideal for comparing neck forces and moments to existing injury threshold values, calculating injury criteria and for better understanding the biomechanical mechanisms of neck injury and load sharing during sub-injurious and injurious loading.


  • Investigation of Upper Body and Cervical Spine Kinematics of Post Mortem Human Subjects (PMHS) during Low-Speed, Rear-End Impacts

    by Nicholas A. White, Paul C. Begeman, Warren N. Hardy, King H. Yang, Koshiro Ono, Fusako Sato, Koichi Kamiji, Tsuyoshi Yasuki, Michael J. Bey

    A total of eight low-speed, rear-end impact tests using two Post Mortem Human Subjects (PMHS) in a seated posture are reported. These tests were conducted using a HYGE-style mini-sled. Two test conditions were employed: 8 kph without a headrestraint or 16 kph with a headrestraint. Upper-body kinematics were captured for each test using a combination of transducers and high-speed video. A 3-2-2-2-accelerometer package was used to measure the generalized 3D kinematics of both the head and pelvis. An angular rate sensor and two single-axis linear accelerometers were used to measure angular speed, angular acceleration, and linear acceleration of T1 in the sagittal plane. Two high-speed video cameras were used to track targets rigidly attached to the head, T1, and pelvis. The cervical spine kinematics were captured with a high-speed, biplane x-ray system by tracking radiopaque markers implanted into each cervical vertebra. Vertebral angle time histories are reported for each biplane x-ray test. This study simultaneously investigates both the upper-body and cervical-spine kinematics of PMHS during low-speed, rear-end impacts.


  • Conceptual development of a personalised whiplash protection system

    by Nicholas A. White, Jingwen Hu, King H. Yang

    Modern automobiles are safer than their predecessors owing to the installation of new, more effective vehicular restraint systems. Unfortunately, crash-induced fatality and injury rates remain high because certain data related to human injury responses and tolerances are not available to aid in the design of more effective occupant protection. A one-size-fits-all approach is not always the best way to protect occupants of different ages, sizes and weights. We believe that personalised protection systems will become the future trend in designing restraint systems. In this study, combined post mortem human subject testing, medical imaging segmentation and explicit finite element analyses were used to exemplify the use of patient-specific data in injury analysis. Rear-end impact simulations were run with the FE models to depict the head and neck kinematics during the so-called 'whiplash' event. Simulations of an active head restraint system were conducted to investigate the risk of neck injury.


  • Development of Numerical Models for Injury Biomechanics Research: A Review of 50 Years of Publications in the Stapp Car Crash Conference

    by King H. Yang, Jingwen Hu, Nicholas A. White, Albert I. King, Clifford C. Chou, Priya Prasad

    Numerical analyses frequently accompany experimental investigations that study injury biomechanics and improvements in automotive safety. Limited by computational speed, earlier mathematical models tended to simplify the system under study so that a set of differential equations could be written and solved. Advances in computing technology and analysis software have enabled the development of many sophisticated models that have the potential to provide a more comprehensive understanding of human impact response, injury mechanisms, and tolerance. In this article, 50 years of publications on numerical modeling published in the Stapp Car Crash Conference Proceedings and Journal were reviewed. These models were based on: (a) author-developed equations and software, (b) public and commercially available programs to solve rigid body dynamic models (such as MVMA2D, CAL3D or ATB, and MADYMO), and (c) finite element models. A clear trend that can be observed is the increasing use of the finite element method for model development. A review of these modeling papers clearly indicates the progression of the state-of-the-art in computational methods and technologies in injury biomechanics.