Taofik Oladimeji Azeez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Taofik Oladimeji Azeez has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- Afoma Loretta Okafor
Department of Biomedical Engineering and
2 shared publications - Christopher Chibuzor Ejiogu2 shared publications
- Daniel Odetunde2 shared publications
- Felicity Arukalam2 shared publications
- Innocent Chukwudi Ekuma
Department of Biomedical Engineering, Alex Ekwueme Federal University Teaching Hospital, Abakaliki, Nigeria
2 shared publications - Iwuji Samuel Chidi
Department of Biomedical Engineering and; Department of Physiology, Federal University of Technology, Owerri, Nigeria; ACE-FUELS-FUTO, Nigeria
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by JMIR Publications Inc. in JMIR Preprints
Bioactives and Optimized Modeling of Antimicrobial Activity in Modified Jatropha curcas–Black Soap (Preprint)
BACKGROUND Urinary tract infections (UTIs), the second most common type of infection in humans, remain a major public health concern due to their high prevalence and associated morbidity. Although several antibiotics are available for their treatment, the emergence and re-emergence of antimicrobial-resistant strains continue to limit therapeutic effectiveness. The formulation of combined therapeutic agents may enhance antimicrobial efficacy by producing synergistic effects that improve activity against resistant strains. OBJECTIVE To investigate the bioactives, antimicrobial activity, and response surface–modeled optimization of a modified Jatropha curcas–Abuwe soap formulation against clinically relevant uropathogens. METHODS GC–MS analysis identified phytochemical constituents. The stem juice was extracted using mechanical press method, modified with traditional black soap, diluted and tested against four microorganisms (Staphylococcus aureus, Escherichia coli, klebsiella pneumonia and Proteus species) isolated from urinary tract infections (UTIs) using agar diffusion and minimum inhibitory concentration of (MIC). Response surface methodology (RSM) using a three-level factorial design modeled inhibition zones as a function of extract concentration (C) and water content (CW) using Design-Expert software version 6.0.8. RESULTS GC–MS analysis identified α-linolenic acid (42.49%) and palmitic acid (32.53%) as the dominant constituents, while stearic acid (8.27%), ethyl iso-allocholate (4.17%), squalene (4.18%), palmitic acid methyl ester (3.35%), and other hexadecanoic acid derivatives (2.00%) constituted the remaining components of the unmodified J. curcas. In the modified J. curcas formulation, tetradecanoic acid (69.84%) and n-hexadecanoic acid (21.03%) were identified as the predominant constituents, whereas oleic acid (3.66%), dodecanoic acid derivatives (2.76%), and hexanoic acid (2.71%) were present as minor components. The modified J. curcas formulation demonstrated consistently higher inhibitory activity against all tested organisms (S. aureus: 2.67 ± 1.48 mm, P = .01; E. coli: 3.69 ± 2.15 mm, P = .002; Proteus sp.: 4.53 ± 2.48 mm, P = .01) compared with the unmodified extract. However, against Klebsiella sp. (4.88 ± 1.98 mm), the inhibitory effect of the modified formulation was statistically comparable to that of the unmodified J. curcas extract (P = .11). Modified Jatropha curcas formulation demonstrated enhanced antimicrobial activity (97.24 mg/mL ≤ MIC ≤ 125.00 mg/mL) against all tested bacterial pathogens, whereas the unmodified extract required substantially higher concentrations (187.50 mg/mL ≤ MIC ≤ 250.00 mg/mL) to achieve inhibition, with the most pronounced effect observed against Staphylococcus aureus. Response surface modeling produced well-fitted second-order polynomial models for each organism as a function of concentration and water content. CONCLUSIONS The integration of Jatropha curcas extract into Abuwe soap significantly enhanced antimicrobial efficacy at lower concentrations. This modified formulation shows promise as an alternative antimicrobial approach for managing uropathogenic infections and warrants further investigation
- 1 January 2026
- Published by JMIR Publications Inc. in JMIR Preprints
Open AccessBioactives and Optimized Modeling of Antimicrobial Activity in Modified Jatropha curcas–Black Soap (Preprint)
BACKGROUND Urinary tract infections (UTIs), the second most common type of infection in humans, remain a major public health concern due to their high prevalence and associated morbidity. Although several antibiotics are available for their treatment, the emergence and re-emergence of antimicrobial-resistant strains continue to limit therapeutic effectiveness. The formulation of combined therapeutic agents may enhance antimicrobial efficacy by producing synergistic effects that improve activity against resistant strains. OBJECTIVE To investigate the bioactives, antimicrobial activity, and response surface–modeled optimization of a modified Jatropha curcas–Abuwe soap formulation against clinically relevant uropathogens. METHODS GC–MS analysis identified phytochemical constituents. The stem juice was extracted using mechanical press method, modified with traditional black soap, diluted and tested against four microorganisms (Staphylococcus aureus, Escherichia coli, klebsiella pneumonia and Proteus species) isolated from urinary tract infections (UTIs) using agar diffusion and minimum inhibitory concentration of (MIC). Response surface methodology (RSM) using a three-level factorial design modeled inhibition zones as a function of extract concentration (C) and water content (CW) using Design-Expert software version 6.0.8. RESULTS GC–MS analysis identified α-linolenic acid (42.49%) and palmitic acid (32.53%) as the dominant constituents, while stearic acid (8.27%), ethyl iso-allocholate (4.17%), squalene (4.18%), palmitic acid methyl ester (3.35%), and other hexadecanoic acid derivatives (2.00%) constituted the remaining components of the unmodified J. curcas. In the modified J. curcas formulation, tetradecanoic acid (69.84%) and n-hexadecanoic acid (21.03%) were identified as the predominant constituents, whereas oleic acid (3.66%), dodecanoic acid derivatives (2.76%), and hexanoic acid (2.71%) were present as minor components. The modified J. curcas formulation demonstrated consistently higher inhibitory activity against all tested organisms (S. aureus: 2.67 ± 1.48 mm, P = .01; E. coli: 3.69 ± 2.15 mm, P = .002; Proteus sp.: 4.53 ± 2.48 mm, P = .01) compared with the unmodified extract. However, against Klebsiella sp. (4.88 ± 1.98 mm), the inhibitory effect of the modified formulation was statistically comparable to that of the unmodified J. curcas extract (P = .11). Modified Jatropha curcas formulation demonstrated enhanced antimicrobial activity (97.24 mg/mL ≤ MIC ≤ 125.00 mg/mL) against all tested bacterial pathogens, whereas the unmodified extract required substantially higher concentrations (187.50 mg/mL ≤ MIC ≤ 250.00 mg/mL) to achieve inhibition, with the most pronounced effect observed against Staphylococcus aureus. Response surface modeling produced well-fitted second-order polynomial models for each organism as a function of concentration and water content. CONCLUSIONS The integration of Jatropha curcas extract into Abuwe soap significantly enhanced antimicrobial efficacy at lower concentrations. This modified formulation shows promise as an alternative antimicrobial approach for managing uropathogenic infections and warrants further investigation
- Open Access
- 25 June 2025
- Published by Science Publishing Group in World Journal of Materials Science and Technology
- Vol. 2 (1) , 9-26
Artificial Neural Network Modelling of Corrosion Inhibition of Mild Steel in Marine Environment Using Epoxy-Nickel Oxide Nanocomposite Coatings
The corrosion inhibition of mild steel in 3.5 wt. % NaCl in the absence and presence of epoxy coatings containing NiO nanoparticles with concentrations of 1.0, 2.0, 3.0 and 5.0 wt. % respectively was studied using the gravimetric technique for a duration of 60 days at room temperature and varying temperatures ranging from 30 to 60°C for 5 hours. The Nickel oxide nanoparticles with average particle size was 23 nm were synthesized by the chemical precipitation technique followed by calcination in a muffle furnace for 3 hours at a temperature of 300°C. Results from the study reveal that epoxy-Nickel oxide nanocomposite coatings are effective green corrosion inhibitors for mild steel in 3.5 wt. % NaCl under different operating conditions and at temperatures within the range of 30 to 60°C. A predictive model based on the Artificial Neural Network (ANN) was developed to study the relationship between the input variables (exposure time, inhibitor concentration and Temperature) and output variables (Corrosion Rate and Inhibition Efficiency). The ANN model was based on the Multilayer Perceptron algorithm with input layer comprising of 3 factors and 23 units. Hyperbolic tangent was used as the activation function for the hidden layer which was made up of 3 units. The output layer with two dependent variables was made up of 2 units. Corrosion test data obtained from 80 experimental runs were successfully modelled using ANN with minimal errors. 56 cases corresponding to 70% of test data were used for training the network and 24 cases corresponding to 30% of test data was used for testing the efficacy of the network. The model had sum of squares error of 0.981, average overall relative error of 0.018 for the training component and values of 3.190 and 0.043 for the sum of squares error and average overall relative error respectively for the testing component.
- 25 June 2025
- Published by Science Publishing Group in World Journal of Materials Science and Technology
- Vol. 2 (1) , 9-26
Open AccessArtificial Neural Network Modelling of Corrosion Inhibition of Mild Steel in Marine Environment Using Epoxy-Nickel Oxide Nanocomposite Coatings
The corrosion inhibition of mild steel in 3.5 wt. % NaCl in the absence and presence of epoxy coatings containing NiO nanoparticles with concentrations of 1.0, 2.0, 3.0 and 5.0 wt. % respectively was studied using the gravimetric technique for a duration of 60 days at room temperature and varying temperatures ranging from 30 to 60°C for 5 hours. The Nickel oxide nanoparticles with average particle size was 23 nm were synthesized by the chemical precipitation technique followed by calcination in a muffle furnace for 3 hours at a temperature of 300°C. Results from the study reveal that epoxy-Nickel oxide nanocomposite coatings are effective green corrosion inhibitors for mild steel in 3.5 wt. % NaCl under different operating conditions and at temperatures within the range of 30 to 60°C. A predictive model based on the Artificial Neural Network (ANN) was developed to study the relationship between the input variables (exposure time, inhibitor concentration and Temperature) and output variables (Corrosion Rate and Inhibition Efficiency). The ANN model was based on the Multilayer Perceptron algorithm with input layer comprising of 3 factors and 23 units. Hyperbolic tangent was used as the activation function for the hidden layer which was made up of 3 units. The output layer with two dependent variables was made up of 2 units. Corrosion test data obtained from 80 experimental runs were successfully modelled using ANN with minimal errors. 56 cases corresponding to 70% of test data were used for training the network and 24 cases corresponding to 30% of test data was used for testing the efficacy of the network. The model had sum of squares error of 0.981, average overall relative error of 0.018 for the training component and values of 3.190 and 0.043 for the sum of squares error and average overall relative error respectively for the testing component.
- 10 September 2024
- Published by Elsevier in Journal of Ethnopharmacology
- Vol. 337, 118790
Bioactive constituents and acute toxicity of Blighia sapida capsule extracts using wistar rats
- 10 September 2024
- Published by Elsevier in Journal of Ethnopharmacology
- Vol. 337, 118790
Bioactive constituents and acute toxicity of Blighia sapida capsule extracts using wistar rats
- 14 May 2024
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 981, 165-176
Optimization, Sodium Hydroxide and Plantain Fibres: Mechanical Properties of Unsaturated Polyester Composites for Transtibial Prosthetic Socket
Low mechanical behaviors of natural fibres in the reinforcement of polymer composites have remain an issue of concern. This study is aimed at investigating the effect of NaOH treatment on the mechanical properties of plantain fiber for the transtibial prosthetic sockets made of polyester resin. Plantain fiber was extracted from the plantain bast using water retting techniques. The fibres were modified using alkaline treatment method of 5 – 25% for variable time of 30 to 150 minutes. It was optimized using 3-level Factorial design (3-LCD) of response surface methodology based on tensile properties of treated fibres. The polyester composites of plantain and glass fibers were prepared using hand-layup techniques. Instron Universal testing machine-3369 model was used to determine the tensile and impact properties of fibers and polyester composites. Rockwell hardness tester-RBHT/S-39 model was used to determine the hardness property. The optimum process conditions of 5 % NaOH for 119 minutes improved plantain fiber tensile strength, modulus, strain, energy, and extension by improved by 102.03, 208.07, 9.70, 210.52 and 205.73 %, respectively. The ultimate tensile strength and modulus was obtained at 10 and 12.5% fiber loading. The hardness and impact strength of NaOH modified unsaturated polyester composites was marginally more than 3.51 and 10.69% of glass fiber reinforced unsaturated composites, respectively, at 12.5% fiber loading. FTIR analysis revealed the improvement in mechanical properties. Thus, NaOH modified plantain fiber unsaturated polyester composites serves as a better alternative for making transtibial prosthetic socket.
- 14 May 2024
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 981, 165-176
Optimization, Sodium Hydroxide and Plantain Fibres: Mechanical Properties of Unsaturated Polyester Composites for Transtibial Prosthetic Socket
Low mechanical behaviors of natural fibres in the reinforcement of polymer composites have remain an issue of concern. This study is aimed at investigating the effect of NaOH treatment on the mechanical properties of plantain fiber for the transtibial prosthetic sockets made of polyester resin. Plantain fiber was extracted from the plantain bast using water retting techniques. The fibres were modified using alkaline treatment method of 5 – 25% for variable time of 30 to 150 minutes. It was optimized using 3-level Factorial design (3-LCD) of response surface methodology based on tensile properties of treated fibres. The polyester composites of plantain and glass fibers were prepared using hand-layup techniques. Instron Universal testing machine-3369 model was used to determine the tensile and impact properties of fibers and polyester composites. Rockwell hardness tester-RBHT/S-39 model was used to determine the hardness property. The optimum process conditions of 5 % NaOH for 119 minutes improved plantain fiber tensile strength, modulus, strain, energy, and extension by improved by 102.03, 208.07, 9.70, 210.52 and 205.73 %, respectively. The ultimate tensile strength and modulus was obtained at 10 and 12.5% fiber loading. The hardness and impact strength of NaOH modified unsaturated polyester composites was marginally more than 3.51 and 10.69% of glass fiber reinforced unsaturated composites, respectively, at 12.5% fiber loading. FTIR analysis revealed the improvement in mechanical properties. Thus, NaOH modified plantain fiber unsaturated polyester composites serves as a better alternative for making transtibial prosthetic socket.
- 31 January 2024
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1179, 41-51
Tensile, Flexural and Hardness Properties of Guava Leaves (Psidil guajava) Extract Modified Coconut (Cocos nucifera) Shell Powder-Polymethyl Methacrylate Base Denture Composites
Denture wearing requires loss of teeth through trauma or natural phenomena. The activation of polymerization of polymethyl methacrylate (PMMA) denture base material by methylmethaacrylate (MMA) caused cytotoxic effect and biofilm formation at undercut hindered the mechanical properties and durability of denture. In this study, the effect of guava leaf extract modified coconut shell powder on mechanical properties of hybrid CSP-PMMA denture base composites was investigated. The coconut shell powder (CSP) was obtained from its extracted fiber after dried, grinded and sieved using 80 μm. Guava leaf extract was obtained using ethanolic method. PMMA composites were prepared at variable weight fraction of PMMA+CSP: GLE+MMA using rule of mixture in ratio. The flexural strength, tensile strength, hardness, and toughness properties of the composites at different levels were determined using Universal testing machine of AMETEK EZ 250 model and a shore scale D durometer in accordance with ASTM D – 2240, respectively. The modification of CSP-PMMA by GLE improved the tensile strength, toughness, elongation and hardness by 18.23, 10.52, 68.14 and 1.35 %. Hence the use of GLE in PMMA denture base composites not only enhanced the mechanical behaviours but protect the PMMA denture against biofilm formation. Keywords: Mechanical properties; Guava leave extract, PMMA; Coconut shell fillers.
- 31 January 2024
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1179, 41-51
Tensile, Flexural and Hardness Properties of Guava Leaves (Psidil guajava) Extract Modified Coconut (Cocos nucifera) Shell Powder-Polymethyl Methacrylate Base Denture Composites
Denture wearing requires loss of teeth through trauma or natural phenomena. The activation of polymerization of polymethyl methacrylate (PMMA) denture base material by methylmethaacrylate (MMA) caused cytotoxic effect and biofilm formation at undercut hindered the mechanical properties and durability of denture. In this study, the effect of guava leaf extract modified coconut shell powder on mechanical properties of hybrid CSP-PMMA denture base composites was investigated. The coconut shell powder (CSP) was obtained from its extracted fiber after dried, grinded and sieved using 80 μm. Guava leaf extract was obtained using ethanolic method. PMMA composites were prepared at variable weight fraction of PMMA+CSP: GLE+MMA using rule of mixture in ratio. The flexural strength, tensile strength, hardness, and toughness properties of the composites at different levels were determined using Universal testing machine of AMETEK EZ 250 model and a shore scale D durometer in accordance with ASTM D – 2240, respectively. The modification of CSP-PMMA by GLE improved the tensile strength, toughness, elongation and hardness by 18.23, 10.52, 68.14 and 1.35 %. Hence the use of GLE in PMMA denture base composites not only enhanced the mechanical behaviours but protect the PMMA denture against biofilm formation. Keywords: Mechanical properties; Guava leave extract, PMMA; Coconut shell fillers.
- 31 August 2023
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 65 (11) , 1732-1742
A19-saponin–modified polymethyl methacrylate base denture composites: antimicrobial, mechanical and water absorption potentials
The increased growth of Candida albicans (C. albicans) with allergy reaction of MMA remains an issue of concern among denture wearers. C. albicans growth inhibition, mechanical and water absorption potentials of extracted A19-saponin–commingled PMMA denture base composites were investigated. Soxhlet extraction technique for defatting of Dialium guineense (D. guineense) stem powder was used with ethanol to extract A19-saponin. Fungicidal inhibition concentration of A19-saponin extract of D. guineense was determined. PMMA denture base was prepared with incorporation of A19-saponin at different concentrations of obtained 23.2 % yield. The mechanical and water absorption properties were determined. The minimum and maximum fungicidal inhibition concentrations and susceptibility of 25 and 100 % for extracted A19-saponin were obtained, respectively. PMMA, MMA and extracted A19-saponin of ratio of 30 g: 5 ml: 5 ml denture was optimally fabricated. A19-saponin increased the impact strength and hardness by 352.94 and 11.54 % with reduced water absorption by 82.85 %. Thus, A19-saponin as an additive improved quality of denture.
- 31 August 2023
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 65 (11) , 1732-1742
A19-saponin–modified polymethyl methacrylate base denture composites: antimicrobial, mechanical and water absorption potentials
The increased growth of Candida albicans (C. albicans) with allergy reaction of MMA remains an issue of concern among denture wearers. C. albicans growth inhibition, mechanical and water absorption potentials of extracted A19-saponin–commingled PMMA denture base composites were investigated. Soxhlet extraction technique for defatting of Dialium guineense (D. guineense) stem powder was used with ethanol to extract A19-saponin. Fungicidal inhibition concentration of A19-saponin extract of D. guineense was determined. PMMA denture base was prepared with incorporation of A19-saponin at different concentrations of obtained 23.2 % yield. The mechanical and water absorption properties were determined. The minimum and maximum fungicidal inhibition concentrations and susceptibility of 25 and 100 % for extracted A19-saponin were obtained, respectively. PMMA, MMA and extracted A19-saponin of ratio of 30 g: 5 ml: 5 ml denture was optimally fabricated. A19-saponin increased the impact strength and hardness by 352.94 and 11.54 % with reduced water absorption by 82.85 %. Thus, A19-saponin as an additive improved quality of denture.
- 1 January 2021
- Published by Trans Tech Publications, Ltd. in Journal of Biomimetics, Biomaterials and Biomedical Engineering
- Vol. 51, 15-28
Bioactive Constituents and Potency of Aqueous-Methanolic Extract of Asclepias syriaca on Plasmodium falciparum Infected Albino Rats
High mortality rate couple with the economic effect of deadly Plasmodium falciparum caused by malaria necessitated this study. Evaluation of bioactive constituents and antimalarial properties of the aqueous-methanolic extract of Asclepias syriaca (A. syriaca) was investigated. Bioactive constituents were determined by GC-MS analytical detector. Albino rats were five in each group of six groups (A-E) in which group A was non-infected with P. falciparum (negative control). Groups B, C, D, E were infected with 1 x 10(7)/ml P. falciparum without treated, treated with standard drugs of 20mg of chloroquine/kg, 100, 200 and 400mg of extracted A. syriaca/kg, respectively. Hematological and biochemical parameters of Plasmodium falciparum infected albino rats were determined. Aqueous-methanolic extract of A. syriaca leaf made up of high content of pyrimidine, quinolone and silane derivatives with synergetic properties with potency for therapeutic of malarial and viral infectious diseases. MCV, PLA, RBC, total protein and albumin were significantly elevated upon infected P. falciparum and gradually increases with dosage and time when treated with chloroquine and A.syriaca leaf extract but vice visa for the case WBC and creatinine. Parasitemia level significantly declined when administered with chloroquine and A, syriaca leaf extract for 36 hours. Hence serves as an effective medication in place of chloroquine due to its availability, avoidable and as a source of relevant medications to Plasmodium spp and viral infectious diseases.
- 1 January 2021
- Published by Trans Tech Publications, Ltd. in Journal of Biomimetics, Biomaterials and Biomedical Engineering
- Vol. 51, 15-28
Bioactive Constituents and Potency of Aqueous-Methanolic Extract of Asclepias syriaca on Plasmodium falciparum Infected Albino Rats
High mortality rate couple with the economic effect of deadly Plasmodium falciparum caused by malaria necessitated this study. Evaluation of bioactive constituents and antimalarial properties of the aqueous-methanolic extract of Asclepias syriaca (A. syriaca) was investigated. Bioactive constituents were determined by GC-MS analytical detector. Albino rats were five in each group of six groups (A-E) in which group A was non-infected with P. falciparum (negative control). Groups B, C, D, E were infected with 1 x 10(7)/ml P. falciparum without treated, treated with standard drugs of 20mg of chloroquine/kg, 100, 200 and 400mg of extracted A. syriaca/kg, respectively. Hematological and biochemical parameters of Plasmodium falciparum infected albino rats were determined. Aqueous-methanolic extract of A. syriaca leaf made up of high content of pyrimidine, quinolone and silane derivatives with synergetic properties with potency for therapeutic of malarial and viral infectious diseases. MCV, PLA, RBC, total protein and albumin were significantly elevated upon infected P. falciparum and gradually increases with dosage and time when treated with chloroquine and A.syriaca leaf extract but vice visa for the case WBC and creatinine. Parasitemia level significantly declined when administered with chloroquine and A, syriaca leaf extract for 36 hours. Hence serves as an effective medication in place of chloroquine due to its availability, avoidable and as a source of relevant medications to Plasmodium spp and viral infectious diseases.
- Open Access
- 26 February 2020
- Published by IntechOpen
Thermoplastic Recycling: Properties, Modifications, and Applications
The increasing rate of plastic waste generation coupled with undesirable disposal, especially in the urban areas, has resulted to environmental threat in the globe which has been attributed to legislation, poor biodegradability, economic growth, rural to urban migration, increase in consumption, and standard or cost of living. This chapter will focus on overview, properties of virgin and recycled thermoplastics, recycling techniques, and applications of different types of thermoplastic articles such as HDPE, LDPE, PVC, PET, and polypropylene (PP) with improved properties based on modifications using eco-friendly materials for sustainable applications in order to save human existence from the menace of environmental and economic issues.
- 26 February 2020
- Published by IntechOpen
Open AccessThermoplastic Recycling: Properties, Modifications, and Applications
The increasing rate of plastic waste generation coupled with undesirable disposal, especially in the urban areas, has resulted to environmental threat in the globe which has been attributed to legislation, poor biodegradability, economic growth, rural to urban migration, increase in consumption, and standard or cost of living. This chapter will focus on overview, properties of virgin and recycled thermoplastics, recycling techniques, and applications of different types of thermoplastic articles such as HDPE, LDPE, PVC, PET, and polypropylene (PP) with improved properties based on modifications using eco-friendly materials for sustainable applications in order to save human existence from the menace of environmental and economic issues.
- Open Access
- 30 December 2019
- Published by Global Health and Education Projects, Inc. (GHEP) in International Journal of Translational Medical Research and Public Health
- Vol. 3 (1s) , S1-S33
Book of Abstracts: 4th International Congress on Health Sciences and Technology Organized by the School of Health Technology, Federal University of Technology (FUTO), Owerri, Imo State, Nigeria, 7-9 August, 2019
Copyright © 2019 The Authors. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited
- 30 December 2019
- Published by Global Health and Education Projects, Inc. (GHEP) in International Journal of Translational Medical Research and Public Health
- Vol. 3 (1s) , S1-S33
Open AccessBook of Abstracts: 4th International Congress on Health Sciences and Technology Organized by the School of Health Technology, Federal University of Technology (FUTO), Owerri, Imo State, Nigeria, 7-9 August, 2019
Copyright © 2019 The Authors. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited