KMKrzysztof Makowski

Krzysztof Makowski

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Krzysztof Makowski has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ocena skuteczności filtracji półmasek filtrujących wobec nanoaerozolu zredukowanego tlenku grafenu

    by Centralny Instytut Ochrony Pracy – Państwowy Instytut Badawczy, Krzysztof Makowski, Oliwia Owczarek, Agnieszka Brochocka

    W artykule przedstawiono skuteczność filtracji półmasek filtrujących klasy FFP2 i FFP3 wobec nanocząstek zredukowanego tlenku grafenu. Sprzęt ochrony układu oddechowego został wybrany spośród wielu produktów powszechnie dostępnych na rynku. Pomiary penetracji przeprowadzono z użyciem 0,02-proc. zawiesiny wodnej zredukowanego tlenku grafenu przy przepływie nanoaerozolu 95 l/min. Wartość penetracji odczytywano dla cząstek o wielkości do 100 nm. Przedstawione wyniki badań pokazują, że stosowana obecnie klasyfikacja półmasek filtrujących według normy EN 149:2001+A1:2009, oparta na standardowych aerozolach testowych, nie ma przełożenia na ochronę przed nanoaerozolami zredukowanego tlenku grafenu. W przypadku zbadanych półmasek filtrujących wartości penetracji nanocząstek zredukowanego tlenku grafenu dla większości próbek przekroczyły dopuszczalny zakres określony we wspomnianej normie. W związku z tym konieczne jest opracowanie wytycznych doboru sprzętu ochrony układu oddechowego przeznaczonego do stosowania w warunkach obecności nanocząstek, w tym zredukowanego tlenku grafenu.


  • The Importance of Respirators Fit – Rules and Good Practices

    by Krzysztof Makowski

    This chapter discusses the rules of proper adjustment of the respiratory protective devices to the shape of the user’s face in terms of donning and checking leak tightness of the facepiece and presents the consequences of improper fitting of the device. Individual fitting of the device is discussed, including quantitative and qualitative methods that allow us to assign a protection factor (PF) that gives a real picture of the facepiece adjustment. Definitions of PFs and their values for the given types of protection are provided. The selection of respiratory protective devices using the PF is described.

  • Aspects of Ergonomics in the Use of Respiratory Protective Devices

    by Krzysztof Makowski

    This chapter discusses aspects of ergonomics used in the respiratory protective devices based on the new standards of ISO series, the philosophy of which is to take the human factor and its physiology as a basis for developing a classification of requirements and testing methods. A new parameter used in the assessment of respiratory protective devices, the so-called work of breathing, is discussed. It enables the assessment of the additional body load caused by the use of respiratory protective devices. The research stand and procedure during the research are presented; the research results showing pressure–volume loops of particular types of facepiece of respiratory protective devices are discussed. The methods of determining the dead space of the facepiece related to the examination of carbon dioxide content in the inhaled air are described, and the research stand is presented. Five head models used in the described research, which were developed on the basis of anthropometric measurements of ethnic Americans and the white, black and yellow race, are presented. Reference values for reference measurements of head models are given. 3D modeling for the design of structural elements of personal protective equipment (PPE) is described so that it can be precisely fitted to the dimensions of the user. Incorrect fit of the PPE to the users’ dimensions is one of the main reasons for the failure to use it by the users or for its inadequate protection against hazards at the workplace. The half-mask model is presented; verification testing of the half-mask model carried out on the end user and in terms of protective, performance and strength parameters according to European standards is discussed. A concept of practical performance tests enriched with the requirements of the standards was developed, and a draft of new testing concerning the energy expenditure of the users of this equipment was developed. Then, a series of tests were carried out on the basis of the methodology presented, and additional parameters of the assessment of ergonomics of the equipment were suggested. * * *

  • General Guidelines for the Selection and Use of Filtering Respiratory Protective Devices

    by Agnieszka Brochocka, Krzysztof Makowski

    This chapter discusses the basic principles of selection and use of filtering respiratory protective devices designed to protect against nanoparticles. A guide for the risk assessment of these devices in relation to the concentration of harmful substances in the air, the occupational exposure limit (OEL) and/or derived no-effect level (DNEL) values, the exposure time and the protection class of the respiratory protective devices is included. The subsequent part of this chapter is devoted to nonoccupational hazards, with particular emphasis on smog. Then, the basic principles of using respiratory protective devices, the manner of conducting technical inspection and the principles of supervision of the above-mentioned devices are described. The most common damages to the most important components of filtering respiratory protective devices are illustrated. * * *

  • Application of 3D scanning and 3D printing for designing and fabricating customized half-mask facepieces: A pilot study

    by Krzysztof Makowski, Małgorzata Okrasa

    BACKGROUND: The main function of respiratory protective devices is to provide an intact physical barrier between the environment and the user. To ensure that, a leak-tight fit of the facepiece to the user’s face is essential, regardless of the user’s


  • Ocena skuteczności półmasek filtrujących wobec nanoaerozolu NaCl

    by Krzysztof Makowski

    Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informuj?ce swoich czytelnik?w o najnowszych osi?gni?ciach naukowych i nowoczesnych rozwi?zaniach technicznych w Polsce i na ?wiecie, popularyzuje problemy techniczne oraz poszerza wiedz? i kultur? techniczn?.

  • Open Access

    Mine rescuers’ heat load during the expenditure of physical effort in a hot environment, using ventilated underwear and selected breathing apparatus

    by Anna Marszałek, Grażyna Bartkowiak, Anna Dąbrowska, Sylwia Krzemińska, Krzysztof Łężak, Krzysztof Makowski, Joanna Bugajska

    Mine rescuers’ heat load under the same physical effort load (25% of the maximal oxygen uptake), using three types of breathing apparatus, in newly developed heat-removing underwear and outerwear was assessed for typical work conditions of mine rescuers, under milder and harsher ambient conditions of 32 and 38 °C, respectively, both at relative humidity of 85% and air velocity of 1.0 m/s. Expending physical effort at the same load while using different kinds of breathing apparatus resulted in a similar heat load. Under both milder and harsher ambient conditions, heat storage and sweating intensity were greater than the average limit value recommended by hygienic standards, which indicates that the use of breathing apparatus significantly hinders heat exchange with the environment. The developed clothing for mine rescuers was highly rated, and was considered by most people to be better than that used currently.


  • Efficiency of Filtering Materials Used in Respiratory Protective Devices Against Nanoparticles

    by Agnieszka Brochocka, Krzysztof Makowski, Katarzyna Majchrzycka, Piotr Grzybowski

    The basic aim of this research was to establish the efficiency of filtering materials widely used in respiratory protection devices with particular interest in their porosity, degree of electric and changeable process parameters, such as the flow rate of the test nanoaerosol and the size range of nanoparticles. Tests were carried out with an NaCl solid aerosol of 3.2 × 105 particles/cm3 for the range of particle size of 7–270 nm, at aerosol flow rate of 1800, 2700, 3600, 4500 and 5400 L/h. The tests showed that electrospun nonwovens were the most effective filtering materials for nanoparticles over 20 nm. Melt-blown electret nonwovens with lower porosity than electrospun nonwovens had higher values of penetration of 1%–4%. Those materials provided very efficient protection against nanoparticles of certain sizes only.


  • Penetration of different nanoparticles through melt-blown filter media used for respiratory protective devices

    by Agnieszka Brochocka, Krzysztof Makowski, Katarzyna Majchrzycka

    The appearance of new dangers in the form of harmful aerosols containing nanoparticles has necessitated work on ensuring effective protection of humans’ respiratory systems. So far, there is no uniform method, which would make it possible to classify filtering devices, for evaluating the efficiency of respiratory protective devices against nanoaerosols. The authors assessed the morphology of various nanoaerosols of NaCl, titanium dioxide in two forms, anatase and rutile, and aluminosilicate based on observations using a scanning microscope. Then the efficiency of filtration of meltblown fabrics with surface densities of 30, 50, 70, and 90 g/m2 against those nanoaerosols were tested. The experimental results were subjected to the theoretical analysis based on filtration theory. For all the fabric types, similar filtration efficiencies were obtained irrespective of the morphological structure of the nanoaerosol particles. The theoretical predictions are in good agreement with the experimental results. The conclusion is therefore drawn that equipment can be evaluated based on testing of filtration efficiency against any tested aerosols.


  • Use of Personal Protective Equipment in the Workplace

    by Grażyna Bartkowiak, Krzysztof Baszczyński, Anna Bogdan, Agnieszka Brochocka, Rafał Hrynyk, Emilia Irzmańska, Danuta Koradecka, Katarzyna Majchrzycka, Krzysztof Makowski, Anna Marszałek, et al.