Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Arantxa Aznar has a total of 34 co-authors. Here are the top co-authors by number of shared publications:

  • Pablo Salvador Fernandez Escamez

    Universidad Politécnica de Cartagena (ETSIA)

    8 shared publications
  • Alfredo Palop

    Universidad Politécnica de Cartagena Member of European University of Technology EUT+, Departamento de Ingeniería Agronómica, Instituto de Biotecnología Vegetal, Spain

    4 shared publications
  • Encarna Aguayo

    Postharvest and Refrigeration Group, Universidad Politécnica de Cartagena (UPCT), Paseo Alfonso XIII, 48, 30203 Cartagena, Spain

    3 shared publications
  • José Ángel Salas-Millán

    Postharvest and Refrigeration Group, Universidad Politécnica de Cartagena (UPCT), Paseo Alfonso XIII, 48, 30203 Cartagena, Spain

    3 shared publications
  • Paula M. Periago

    Departamento de Ingeniería de Alimentos y del Equipamiento Agrícola, Escuela Técnica Superior de Ingeniería Agronómica, Universidad Politécnica de CartagenaCartagena, Spain; Unidad de Microbiología y Seguridad Alimentaria, Instituto de Biotecnología Vegetal, Universidad Politécnica de CartagenaCartagena, Spain

    3 shared publications
  • Alberto Garre

    Departamento de Ingeniería de Alimentos y del Equipamiento Agrícola, Instituto de Biotecnología Vegetal, Universidad Politécnica de Cartagena (ETSIA), Paseo Alfonso XIII, 48, 30203 Cartagena, Spain

    2 shared publications

Latest Publications

  • Open Access

    Revalorization of Melon By-Product to Obtain a Novel Sparkling Fruity-Based Wine

    by José Ángel Salas-Millán, Encarna Aguayo, Andrés Conesa-Bueno, Arantxa Aznar

    Fresh melons not meeting cosmetic standards were revaluated into sparkling melon-based wine. Firstly, still melon wine was elaborated and bottled into 750 mL bottles, closed with a crown seal, and stored for 10-weeks at 14 °C. The oenological parameters and polar compounds in must, still wine, and during the sparkling process were evaluated during the experiment. The volatile profile was qualified by GC-MS, and the odor activity value (OAV) and relative odor contribution (ROC) were measured for aroma characterization. Results show that sparkling wine resulted in 12% v/v ethanol. Certain amino acids contributed to the transformation and increase of volatile compounds via Ehrlich’s pathway: leucine to isoamyl alcohol; valine to iso-butyl alcohol; and phenylalanine to phenethyl alcohol. The volatile compounds also increased after the first fermentation, principally in acetate and ethyl esters, and higher alcohols. Isoamyl acetate, ethyl decanoate, 3,6-nonadienyl acetate, and (E,Z)-nonadien-1-ol had the highest OAV and ROC values among the volatiles; this contributed to the sweet, fruity, banana, tropical, nutty and melon aroma in this sparkling wine. Sensory evaluation (100 to 40) was evaluated according to International Organisation of Vine and Wine compendium, the final product (10-week) scored 92 points, with great visual, nose, and taste values. This study demonstrates how by-products revalorization can provide new products such as this novel sparkling wine with a characteristic and distinctive aroma, good sensory acceptance and market potential.


  • Open Access

    Fruit Wine Obtained from Melon by-Products: Physico-Chemical and Sensory Analysis, and Characterization of Key Aromas by GC-MS

    by José Ángel Salas-Millán, Arantxa Aznar, Encarnación Conesa, Andrés Conesa-Bueno, Encarna Aguayo

    About 20% of fresh fruits and vegetables are rejected for not meeting the superficial aesthetic standards (color, shape, and size). Part of the food production is not used in the human food chain. The transformation of these fresh products into novel re-valuable ones is a challenge for a sustainable food industry. This research studies an alcoholic fermentation fruit-based wine from two melon (Cucumis melo L.) cultivars: Jimbee® (smooth and yellow skin with orange flesh) and Okashi® (netted yellow-orange skin with pale green flesh). The melon juice (must) was fermented by Saccharomyces cerevisiae and enriched in sucrose and organic acids to achieve alcoholic fermentation, acidity, and flavors, obtaining a fruity-flavored and dry melon-based wine with 10° alcoholic grade, in both melon cultivars. The volatile compounds were measured by GC-MS and the odor activity value (OAV) was calculated. The Jimbee and Okashi melon wines increased their aromatic profile due to an increment in medium-chain fatty acid ethyl esters such as ethyl hexanoate, ethyl octanoate, and ethyl decanoate (OAV > 1), which contributed to the fruity aroma. Other volatile compounds such as ethyl 9-decenoate and phenethyl acetate (OAV > 1) appeared in the Okashi wine, which brought a floral aroma. For sensory evaluation (40–100), the Jimbee cultivar, with its orange flesh, scored 68.2 and the Okashi cultivar, with pale green flesh, scored 82.8, which was the preferred melon-based wine. This is an example of a circular economy model to produce a fruit-based wine with commercial potential and satisfactory sensory evaluation.


  • Open Access

    Functional food obtained from fermentation of broccoli by-products (stalk): Metagenomics profile and glucosinolate and phenolic compounds characterization by LC-ESI-QqQ-MS/MS

    by José-Ángel Salas-Millán, Arantxa Aznar, Encarnación Conesa, Andrés Conesa-Bueno, Encarna Aguayo


  • Open Access

    Dynamics of Microbial Inactivation and Acrylamide Production in High-Temperature Heat Treatments

    by Jose Lucas Peñalver-Soto, Alberto Garre, Arantxa Aznar, Pablo S. Fernández, Jose A. Egea

    In food processes, optimizing processing parameters is crucial to ensure food safety, maximize food quality, and minimize the formation of potentially toxigenic compounds. This research focuses on the simultaneous impacts that severe heat treatments applied to food may have on the formation of harmful chemicals and on microbiological safety. The case studies analysed consider the appearance/synthesis of acrylamide after a sterilization heat treatment for two different foods: pureed potato and prune juice, using Geobacillus stearothermophilus as an indicator. It presents two contradictory situations: on the one hand, the application of a high-temperature treatment to a low acid food with G. stearothermophilus spores causes their inactivation, reaching food safety and stability from a microbiological point of view. On the other hand, high temperatures favour the appearance of acrylamide. In this way, the two objectives (microbiological safety and acrylamide production) are opposed. In this work, we analyse the effects of high-temperature thermal treatments (isothermal conditions between 120 and 135 °C) in food from two perspectives: microbiological safety/stability and acrylamide production. After analysing both objectives simultaneously, it is concluded that, contrary to what is expected, heat treatments at higher temperatures result in lower acrylamide production for the same level of microbial inactivation. This is due to the different dynamics and sensitivities of the processes at high temperatures. These results, as well as the presented methodology, can be a basis of analysis for decision makers to design heat treatments that ensure food safety while minimizing the amount of acrylamide (or other harmful substances) produced.


  • Open Access

    Impact of Heating Rates on Alicyclobacillus acidoterrestris Heat Resistance under Non-Isothermal Treatments and Use of Mathematical Modelling to Optimize Orange Juice Processing

    by Juan-Pablo Huertas, María Ros-Chumillas, Alberto Garre, Pablo S. Fernández, Arantxa Aznar, Asunción Iguaz, Arturo Esnoz, Alfredo Palop

    Alicyclobacillus acidoterrestris is a spoilage microorganism responsible for relevant product and economic losses in the beverage and juice industry. Spores of this microorganism can survive industrial heat treatments and cause spoilage during posterior storage. Therefore, an effective design of processing treatments requires an accurate understanding of the heat resistance of this microorganism. Considering that industrial treatments are dynamic; this understanding must include how the heat resistance of the microorganism is affected by the heating rate during the heating and cooling phases. The main objective of this study was to establish the effect of heating rates and complex thermal treatments on the inactivation kinetics of A. acidoterrestris. Isothermal experiments between 90 and 105 °C were carried out in a Mastia thermoresistometer, as well as four different dynamic treatments. Although most of the inactivation takes place during the holding phase, our results indicate the relevance of the heating phase for the effectiveness of the treatment. The thermal resistance of A. acidoterrestris is affected by the heating rate during the heating phase. Specifically, higher heating rates resulted in an increased microbial inactivation with respect to the one predicted based on isothermal experiments. These results provide novel information regarding the heat response of this microorganism, which can be valuable for the design of effective heat treatments to improve product safety and stability. Moreover, it highlights the need to incorporate experimental data based on dynamic treatments in process design, as heating rates can have a very significant effect on the thermal resistance of microorganisms.


  • One-step global parameter estimation of kinetic inactivation parameters for Bacillus sporothermodurans spores under static and dynamic thermal processes

    by F. Cattani, K.D. Dolan, S.D. Oliveira, D.K. Mishra, C.A.S. Ferreira, P.M. Periago, A. Aznar, P.S. Fernandez, V.P. Valdramidis


  • Open Access

    High Heating Rates Affect Greatly the Inactivation Rate of Escherichia coli

    by Juan-Pablo Huertas, Arantxa Aznar, Arturo Esnoz, Pablo S. Fernández, Asunción Iguaz, Paula M. Periago, Alfredo Palop

    Heat resistance of microorganisms can be affected by different influencing factors. Although the effect of heating rates has been scarcely explored by the scientific community, recent researches have unraveled its important effect on the thermal resistance of different species of vegetative bacteria. Typically heating rates described in the literature ranged from 1 to 20ºC/min but the impact of much higher heating rates is unclear. The aim of this research was to explore the effect of different heating rates, such as those currently achieved in the heat exchangers used in the food industry, on the heat resistance of Escherichia coli. A pilot plant tubular heat exchanger and a thermoresistometer Mastia were used for this purpose. Results showed that fast heating rates had a deep impact on the thermal resistance of E. coli. Heating rates between 20 and 50ºC/min were achieved in the heat exchanger, which were much slower than those around 20ºC/s achieved in the thermoresistometer. In all cases, these high heating rates led to higher inactivation than expected: in the heat exchanger, for all the experiments performed, when the observed inactivation had reached about seven log cycles, the predictions estimates about 1 log cycle of inactivation; in the thermoresistometer these differences between observed and predicted values were even more than ten times higher, from 4.07 log cycles observed to 0.34 predicted at a flow rate of 70 mL/min and a maximum heating rate of 14.7ºC/s. A quantification of the impact of the heating rates on the level of inactivation achieved was established. These results point out the important effect that the heating rate has on the thermal resistance of E. coli, with high heating rates resulting in an additional sensitization to heat and therefore an effective food safety strategy in terms of food processing.


  • Antimicrobial activity of nisin, thymol, carvacrol and cymene against growth of Candida lusitaniae

    by Arantxa Aznar, Pablo S Fernández, Paula M Periago, Alfredo Palop

    Yeasts are tolerant to acid pH values, are able to grow in anaerobic media and have minimum nutrition requirements. These capabilities enable them to survive and even grow in foods prepared from acid fruits or vegetables. Among yeasts, Candida is one of the genus most frequently isolated from fruit juices. Bacteriocins and essential oils from spices and aromatic herbs are an alternative to preservatives and other technological treatments and have the advantage that their natural origins do not lead to consumer rejection. However, before the food industry uses them on a large scale, it is necessary to know their effects on microorganisms. The objective of this research was to study the effect of different concentrations of nisin, thymol, carvacrol and cymene on the growth of Candida lusitaniae in pH 5 broth at 25 ℃, and their potential uses as food preservatives. The addition of nisin at the concentrations tested (up to 3 µmol L−1) did not affect the yeast growth. Thymol, carvacrol and cymene completely inhibited the yeast growth at concentrations over 1 mM for at least 21 days at 25 ℃. Below this concentration, inhibitions on yeast growth were observed at increasing concentrations. The effect of thymol was also proved in tomato juice. This study indicates the potential use of essential oils for preservation of minimally processed foods.


  • Combined effect of nisin, carvacrol and a previous thermal treatment on the growth of Salmonella enteritidis and Salmonella senftenberg

    by María-Dolores Esteban, Arantxa Aznar, Pablo S Fernández, Alfredo Palop

    The aim of this study was to evaluate the combined effect of a previous mild heat treatment (15 min at 55 ℃) with the use of antimicrobials, nisin and carvacrol, on the growth of Salmonella enteritidis and Salmonella senftenberg. Natural antimicrobials, alone or combined with a previous mild heat treatment, affected the growth of these two serovars in Tryptone Soy Broth at 37 ℃. Increasing concentrations of carvacrol had a significant effect on both growth rate and lag phase duration of both strains. The time to reach stationary phase was almost doubled in the case of S. enteritidis when a concentration of 0.77 mM in carvacrol was added. For S. senftenberg the effect was smaller. The effect of nisin and of heat, applied individually, was lower for both microorganisms. A combination of 1.2 µM nisin with 0.77 mM carvacrol significantly delayed the growth of heat treated cells, compared to the control without antimicrobials, showing additive effects.


  • Characterisation of the resistance and the growth variability of Listeria monocytogenes after high hydrostatic pressure treatments

    by Marina Muñoz-Cuevas, Leymaya Guevara, Arantxa Aznar, Antonio Martínez, Paula M. Periago, Pablo S. Fernández