Manish Kumar
Research Subjects
Research Interests
Manish Kumar has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Arti Saxena
Electronics Engineering, Dr. APJ Abdul Kalam Technical University, Lucknow, India
2 shared publications - Y. M. Dubey
Department of Electronics and Communication Engineering, Pranveer Singh Institute of Technology (PSIT), Kanpur, India
2 shared publications - Abneesh Saxena
Ordnance Factory Kanpur, MOD, Kanpur, India
1 shared publication - Arti Saxena
Department of Electronics and Communication, Pranveer Singh Institute of Technology, Kanpur, Uttar Pradesh, India
1 shared publication - M. C. Srivastava
Electronics and Communication Engineering Department Jaypee Institute of Information Technology Noida India
1 shared publication - Umesh Kumar
Electrical Engineering Department Indian Institute of Technology Delhi India
1 shared publication
Latest Publications
- RetractionOpen Access
- 27 March 2024
- Published by Springer Nature in Journal of Combinatorial Optimization
- Vol. 47 (3) , 1
Retraction Note: ARX and ARMAX modelling of SBCNC-60 machine for surface roughness and MRR with optimization of system response using PSO
- 27 March 2024
- Published by Springer Nature in Journal of Combinatorial Optimization
- Vol. 47 (3) , 1
RetractionOpen AccessRetraction Note: ARX and ARMAX modelling of SBCNC-60 machine for surface roughness and MRR with optimization of system response using PSO
- Retracted
- 19 January 2023
- Published by Springer Nature in Journal of Combinatorial Optimization
- Vol. 45 (2) , 1-29
RETRACTED ARTICLE: ARX and ARMAX modelling of SBCNC-60 machine for surface roughness and MRR with optimization of system response using PSO
- 19 January 2023
- Published by Springer Nature in Journal of Combinatorial Optimization
- Vol. 45 (2) , 1-29
RetractedRETRACTED ARTICLE: ARX and ARMAX modelling of SBCNC-60 machine for surface roughness and MRR with optimization of system response using PSO
- 14 June 2021
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 69 (6) , 3497-3510
Performance Comparison of ANFIS, FOPID-PSO and FOPID-Fuzzy Tuning Methodology for Optimizing Response of High-Performance Drilling Machine
A fractional-order proportional integral derivative (FOPID)controller has replaced the classical PID controller used in industries for process control application. FOPID is less sensitive to the change of control parameters than PID Controller, due to which better results are obtained. The FOPID provides a robust and stable system for a higher-order system as of iso- damping property. This study aims to find a stable and controlled structure by tuning the FOPID controller with the Particle Swarm Optimization (PSO) algorithm, fuzzy-based logic approach, and Adaptive Neuro-fuzzy inference system (ANFIS). The tuning of FOPID is done to overcome deficits of PID controller using the different types of optimization method to overcome large overshoot and large settling time. This paper presented useful techniques based on PSO, fuzzy logic, and ANFIS to optimize FOPID controlled high-performance drilling machines. On the analysis and comparisons of simulation findings, it is observed that the FOPID-PSO approach provides better performance over the Ziegler-Nichols (ZN)-FOPID and the above-mentioned intelligent techniques in terms of less settling time (ts=0.823sec.) & optimized peak overshoot (Mp=2.44%) for the mentioned target.
- 14 June 2021
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 69 (6) , 3497-3510
Performance Comparison of ANFIS, FOPID-PSO and FOPID-Fuzzy Tuning Methodology for Optimizing Response of High-Performance Drilling Machine
A fractional-order proportional integral derivative (FOPID)controller has replaced the classical PID controller used in industries for process control application. FOPID is less sensitive to the change of control parameters than PID Controller, due to which better results are obtained. The FOPID provides a robust and stable system for a higher-order system as of iso- damping property. This study aims to find a stable and controlled structure by tuning the FOPID controller with the Particle Swarm Optimization (PSO) algorithm, fuzzy-based logic approach, and Adaptive Neuro-fuzzy inference system (ANFIS). The tuning of FOPID is done to overcome deficits of PID controller using the different types of optimization method to overcome large overshoot and large settling time. This paper presented useful techniques based on PSO, fuzzy logic, and ANFIS to optimize FOPID controlled high-performance drilling machines. On the analysis and comparisons of simulation findings, it is observed that the FOPID-PSO approach provides better performance over the Ziegler-Nichols (ZN)-FOPID and the above-mentioned intelligent techniques in terms of less settling time (ts=0.823sec.) & optimized peak overshoot (Mp=2.44%) for the mentioned target.
- Open Access
Tunable Multifunction Filter Using Current Conveyor
The paper presents a current tunable multifunction filter using current conveyor. The proposed circuit can be realized as on chip tunable low pass, high pass, band pass and elliptical notch filter. The circuit employs two current conveyors, one OTA, four resistors and two grounded capacitors, ideal for integration. It has only one output terminal and the number of input terminals may be used. Further, there is no requirement for component matching in the circuit. The resonance frequency ({\omega}0) and bandwidth ({\omega}0 /Q) enjoy orthogonal tuning. The cutoff frequency of the filter is tunable by changing the bias current, which makes it on chip tunable filter. The circuit is realized by using commercially available current conveyor AD844 and OTA LM13700. A HSPICE simulation of circuit is also studied for the verification of theoretical results.
Open AccessTunable Multifunction Filter Using Current Conveyor
The paper presents a current tunable multifunction filter using current conveyor. The proposed circuit can be realized as on chip tunable low pass, high pass, band pass and elliptical notch filter. The circuit employs two current conveyors, one OTA, four resistors and two grounded capacitors, ideal for integration. It has only one output terminal and the number of input terminals may be used. Further, there is no requirement for component matching in the circuit. The resonance frequency ({\omega}0) and bandwidth ({\omega}0 /Q) enjoy orthogonal tuning. The cutoff frequency of the filter is tunable by changing the bias current, which makes it on chip tunable filter. The circuit is realized by using commercially available current conveyor AD844 and OTA LM13700. A HSPICE simulation of circuit is also studied for the verification of theoretical results.