PUPriyantha Nawagamuwa Udeni

Priyantha Nawagamuwa Udeni

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Priyantha Nawagamuwa Udeni has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrating material performance and pedestrian experience in Sri Lanka: a review of bio-based wood-clay composites in landscape architecture

    by K.P.S. Amandi, A.A. Hettiarachchi, U.P. Nawagamuwa

    Assessing the urban potential of bio-based materials requires a transdisciplinary evaluation framework that bridges the mechanical durability of civil engineering with the sensory microclimatic and aesthetic goals of Landscape Architecture. Using a systematic literature review following the PRISMA 2020 guidelines, this study synthesizes global knowledge on wood-clay composites (WCC) as low-impact pedestrian paving systems. Peer-reviewed studies published between 2010 and 2025 were analysed to synthesize knowledge on material properties and composition, mechanical and thermal behaviour, and aesthetic and sensory qualities. Findings indicate that appropriate incorporation of sawdust enhances porosity, reduces thermal conductivity, and maintains structural stability. Thereby offering a dual benefit of environmental adaptation and pedestrian comfort. Surface attributes such as texture, roughness, and visual coherence were identified as critical mediators of walking satisfaction and safety perception. Despite these advances, gaps persist in integrating multi-dimensional evaluation frameworks that link structural performance, microclimate adaptation, and human-centered design, particularly in real urban contexts. The study proposes a Multi-Dimensional Pedestrian Pavement Framework (MDPPF), emphasizing the interplay of material properties, thermal and hydrological behaviour, and sensory-aesthetic parameters to inform evidence-based landscape architectural decision-making. Future research should prioritize field-based validation, pedestrian-centered design interventions, and low-energy bio-based material stabilization strategies to foster paving systems that simultaneously advance walkability, urban thermal regulation, and aesthetic quality. This review contributes to a transdisciplinary understanding of sustainable paving, bridging technical feasibility with human experience and urban design excellence, and offers conceptual pathways for integrating bio-based composites into pedestrian-oriented landscapes.

  • Advancing Circular Economy: Utilizing Shredded Scrap Tyres in Gabion Wall Construction

    by Priyantha Nawagamuwa Udeni, Chathurangani De Silva Bavindi

    The global accumulation of scrap tyres presents a growing environmental and public health challenge due to their resistance to degradation and limited recycling options. Addressing this issue through innovative reuse strategies is vital for advancing sustainable construction practices. This study explores the integration of shredded scrap tyres as a lightweight fill material in gabion wall construction, promoting circular economy principles by transforming waste into a valuable engineering resource. A novel method was developed using shredded tyres, cut into pieces measuring 100 mm × 50 mm, mixed with rockfill (75–100 mm in size), and placed within gabion units. The structural behavior of these modified gabions was analyzed with a focus on lateral and vertical displacement patterns, bulging behavior, and overall stability. Factor of safety calculations indicated that a gabion unit with a height and depth of 3 meters could achieve a significant unit weight reduction up to 8.2 kN/m³ compared to conventional rockfill gabions, which typically weigh between 15 and 19 kN/m³. The introduction of tyre pieces resulted in a void ratio of approximately 0.4, suggesting effective packing and compaction. The lightweight gabion units demonstrated the capacity to safely support the load of three stacked units without significant deformation, validating their structural integrity for practical applications. To maintain optimal performance, it is essential to keep the unit weight at or below 8.2 kN/m³ and ensure a void ratio between 0.3 and 0.4. Further testing is recommended to evaluate compatibility across varying rock and tyre densities. Overall, this research highlights a sustainable and cost-effective approach to scrap tyre reuse, contributing to resource efficiency, waste reduction, and the development of eco-friendly materials for retaining wall applications in civil engineering.

  • Open Access

    Mineralogical Evolution and Geo-mechanical Characterization of Weathering Profiles Along the Central Expressway (CEP 3), Sri Lanka

    by K. W. D. Sanjeewa, U. P. Nawagamuwa, A. M. K. B. Abeysinghe

    This research investigates the mineralogical and geo-mechanical factors influencing slope stability along Section 3 of the Central Expressway Project (CEP 3), Sri Lanka. Through a combination of borehole logging, petrographic analysis, and X-ray diffraction (XRD), a comprehensive weathering profile was established. Results delineate a transition from stable, fresh metamorphic gneissic rocks to highly unstable residual soils (SM and ML types). Petrographic data reveal the progressive alteration of primary minerals, specifically Feldspar, Biotite, and Hornblende, into secondary Clay phases. XRD analysis identified the presence of Smectite and Kaolinite, with the former presenting significant risks for moisture-induced volume changes and rotational slides in high-cut sections. The study concludes that the thickness and stability of the residual mantle are directly governed by the modal mineralogy of the metamorphic parent rock, providing a critical framework for geotechnical risk mitigation in hilly terrains.

  • Open Access

    Enhancement of River Bank Stability by Hibiscus tiliaceus Root Reinforcement: A Nature-based Solution

    by L. G. C. Madhushan, U. P. Nawagamuwa, M. D. J. P. Wickramasooriya

    Riverbank protection is becoming a significant environmental challenge in Sri Lanka. Although structural solutions have been commonly applied for slope stabilisation, many approaches using Nature-based Solutions (NbS) have been employed by humans for a long time to enhance riverbank stability as sustainable and ecologically practicable solutions. As an NbS, this research investigates the mechanical stabilisation potential of Hibiscus tiliaceus through field assessments and numerical modelling. Hibiscus tiliaceus is a native species that has been traditionally used in Sri Lanka. Field observations along the Kelani River (Hanwella to Kaduwela) showed that sections with Hibiscus tiliaceus displayed enhanced stability compared to non-vegetated areas. Numerical analysis was conducted using SLOPE/W software, simulating three slope geometries (1V:1H, 1V:1.5H, 1V:2H) under four hydraulic conditions: low flow, mid flow, full flow, and rapid drawdown in the river. The root reinforcement was modelled by incorporating depth-varying apparent cohesion based on literature-derived parameters. Results showed that vegetated slopes have consistently higher Factors of Safety (FoS), particularly on steep slopes under rapid drawdown. The findings highlight the importance of Hibiscus tiliaceus as a sustainable, cost-effective NbS for riverbank protection and offer a pathway for integrating tree vegetation into riverbank failure control strategies in Sri Lanka.

  • Vegetated retaining walls – a sustainable bio-engineering method to stabilise slopes

    by K. Ushanththan, U.P. Nawagamuwa

    Stabilization of natural and man-made slopes across different regions in Sri Lanka is a major engineering problem. The conventional approach of constructing retaining structures like masonry, concrete, or gabion walls has traditionally been adopted for enhancing slope stability. However, the cost of building and sustaining these traditional systems keeps rising with each passing year. Therefore, soil bioengineering has been demonstrated to be a cost-effective and sustainable option where vegetation is supplemented with structural elements to enhance slope stability. One such bioengineering application is the vegetated crib wall, a gravity retaining structure with a special form of structural support with live vegetation. A crib wall is typically composed of a framework of various materials filled with in-place soil or other fill material. In the current study, bamboo was used as the primary structural material due to its renewable nature, strength, cost-effectiveness, and ecological sustainability. The walls of the bamboo cribs were incorporated with live plant cuttings or vegetation roots, constituting a living system that not only provides immediate structural strength but also assists in long-term slope strengthening through root growth. In this research, numerical modelling is employed in PLAXIS 2D software to determine the stability of bamboo crib walls. For two most vital stages: (1) instant stage following the construction when there is limited vegetation contribution and (2) after that bamboo-growing stage, the root system strengthens slope stability through natural processes, two approaches of assessment are based on factor of safety (FOS), serving as a chief measure of stability of slope. Comparative analysis between concrete crib and bamboo walls indicated that while bamboo walls offer slightly lower FOS initially, they enhance long-term slope stability considerably because of vegetation growth. Further studies were carried out to investigate the effect of important design parameters on FOS, including wall width, embedment length, water table level, and the type of fill material used. Observations indicate that wall width, embedment depth, and elevation of the water table are good indicators of the overall stability of bamboo crib walls. Vegetation, including bamboo, was found to extend functional life of the structure and long-term slope stability. The study analyzed how water table levels influence the factor of safety (FOS) using wall widths of 1.5 m, 2.0 m, and 2.2 m. Two water table shapes; horizontal and inclined were examined. Bamboo was considered non-porous, while both existing and fill soils were treated as drained materials Also, design parameters such as base slope, the angle of the crib wall was found to be crucial parameters that needed more analysis. Incorporating drainage in the crib wall was also suggested to enhance overall performance. Finally, a detailed cross-sectional design of the bamboo crib wall with structural and vegetative components is illustrated based on the findings of this research.

  • Investigation of nature-inspired solutions for protecting unstable slopes

    by R. Sanjith, U.P. Nawagamuwa

    Slope instability is a critical issue in geotechnical engineering, causing landslides, erosion, and loss of infrastructure worldwide. Conventional stabilisation techniques, such as retaining structures, soil nailing, and earth anchors, are effective but involve high costs, heavy resource use, and environmental impacts. They are often unsustainable under changing climatic conditions. This has led to the search for alternative techniques that are environmentally friendly, cost-effective, and scalable. Nature-inspired solutions (NIS) offer a promising approach by mimicking the structural and functional strategies of natural systems. This study draws inspiration from tree root biomechanics, where branching networks stabilise slopes by anchoring the soil and improving shear strength. The aim was to investigate the potential of a synthetic root-inspired anchoring system for slope stabilisation through laboratory testing. Anchors were fabricated using pre-drilled PVC pipes into which cement grout was pressureinjected, creating branch-like extensions extending into the soil mass. Models were tested under controlled conditions to examine the effect of soil type, moisture content, curing time, and branch configuration. Three soil types were examined; medium sand, coarse sand with silt, and fine gravel with clay, representing cohesionless, mixed, and cohesive-frictional conditions. Moisture content varied between 1% and 5%, curing time ranged from 3 to 28 days, and anchors with different branch numbers (0–8) were tested. Incremental loading using a pulley system was applied until failure, and pull-out capacity was recorded. Results highlighted the following key findings. Moisture content strongly influenced performance, with pull-out capacity increasing up to an optimum of about 4%, after which excess moisture reduced resistance by weakening soil cohesion. Curing time enhanced anchorage strength, with maximum capacity at 28 days, emphasising the importance of grout strength development and soil–anchor bonding. Branch geometry was another critical factor: capacity increased consistently with higher branch counts, confirming that branching improves interlocking and distributes loads effectively. Soil type also played a major role. Fine gravel with clay achieved the highest pull-out resistance (131.8 N), followed by coarse sand with silt (106.4 N) and medium sand (80.8 N), due to combined particle interlocking and clay-induced cohesion, which improved the grout–soil bond. Overall, the research supports that root-inspired synthetic anchors can significantly improve pull-out performance under laboratory conditions and offer an environmentally friendly, costeffective, and time-saving alternative to conventional stabilisation techniques. While this study was limited to small-scale experiments, it establishes a strong foundation for future work. Field-scale testing, numerical modelling, and optimised anchor design should be pursued to advance practical applications. By applying biomimetic concepts to geotechnical engineering, this study supports the development of greener, more sustainable, and cost-effective solutions for slope stabilisation in landslide-prone zones.

  • Open Access

    Effects of Geological and Geotechnical Characteristics on Cut-Slope Stability of Residual Formations in the Hilly Terrain of Sri Lanka A Case Study from Central Expressway (Section 3)

    by K. W. D. Sanjeewa, Udeni P. Nawagamuwa, A. M. K. B. Abeysinghe

    Residual formations consist of residual soils and parent rocks of different levels of weathering due to physical, chemical and biological processes. Existence of residual soils on the hilly slope surface and weathering of parent rocks of the residual formations can cause slope instability problems. Cutting on the hilly slopes during development projects have aggravated the problems. Sri Lankan residual soil formations are formed by weathering of the metamorphic rock and have inherited significant abrupt variations in engineering characteristics. Basic characteristics of these residual formations such as unsaturated shear strength (geotechnical) and variation of geological features (geological) are essential parameters in slope stability analyses. Therefore, a study for effects of geological and geotechnical characteristics on cut slope stability of residual formation was done by selecting major cutting sections on hilly terrain in Central Expressway Project (CEP 03) trace where degree of weathering of the parent rock units, their petrography, physical, mechanical properties and various structural features as well as series of index properties, engineering properties and strength tests on residual soils were performed.This paper highlights the need for detailed experimental studies and presents preliminary studies that have been conducted to establish the geological and geotechnical characteristics of unsaturated Sri Lankan residual formation. The results indicate that the variation in geotechnical as well as geological characteristics of the residual formation are related to cut slope stability in hilly terrain.


  • Open Access

    Evaluation of Subgrade Resilient Modulus using CBR Test Data to Facilitate Mechanistic-Empirical Pavement Design (MEPD)

    by B. H. T. Ariyarathne, U. P. Nawagamuwa

    Sri Lankan road pavement design has relied on empirical design guidelines, and it is now transforming to a more modern approach known as the Mechanistic-Empirical Pavement Design (MEPD) method, aligning with global best practices. One crucial input parameter in this new methodology is the Resilient Modulus (RM) of unbound materials. Determination of RM and establishment of typical values is essential to implement the MEPD. This study has devoted significant attention to the RM evaluation process and developing predictive models for determiningRM from CBR values. Furthermore, typical RMvalues for locally available soil types have been established. In addition to that, ageospatial database has been established with information on soil properties and RMvalues throughout Sri Lanka. This database is a valuable resource for M-E road pavement design, providing quick reference data to conceptual designs and Level 3-MEPD.

  • Open Access

    Use of Chilled Mirror /Dew-Point Method (WP4C) to Develop Soil Water Characteristic Curve for Coastal Silty Sand with a Comparison of the Existing Analytical Models

    by A. A. S. Kaushalya, M. A. Pallewattha, F. S. A. Ansar, U. P. Nawagamuwa

    Soil Water Characteristic Curve (SWCC) is one of the methods to study the behaviour of unsaturated soil. This study presents the SWCC for Sri Lankan coastal silty sand developed using chilled mirror dew-point technique WP4C and compares the performance of a few prediction models. SWCC was also developed experimentally using pressure plate and suction-moisture sensors, to verify the results obtained using WP4C. The fitted SWCC curve was developed using Van Genuchten's (VG) model. The prediction models of Arya and Paris (1981), Aubertin et al. (2003), and Wang et al. (2017) were used to compare the performance using their own suggested values and the more suitable values for this study as the model parameters which were estimated using the least square method. This study shows that chilled mirror dew-point technique which is incorporated in WP4C instrument can be used as a fast and reliable experimental method to develop the SWCC for sandy soils compared to other experimental methods. The Wang et al. (2017) model is better suited for estimating the SWCC through analytical methods for this soil type, using either the recommended values in this study or proposed values by the authors for the modal parameters.