Vadym Karpov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vadym Karpov has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Ievgenii Veretennikov
National Technical University “Kharkiv Polytechnic Institute
4 shared publications - Andrii Kozhushko
National Technical University “Kharkiv Polytechnic Institute
3 shared publications - Andrey Grabovskiy
National technical university «Kharkiv polytechnic institute
2 shared publications - Andrii Bohach2 shared publications
- Anton Vasiliev
National Technical University “Kharkiv Polytechnic Institute
2 shared publications - Dmitriy Volontsevich
National Technical University “Kharkiv Polytechnic Institute
2 shared publications
Latest Publications
- Open Access
- 24 April 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 1,p. 133-151
METHODOLOGY OF DESIGN RESEARCH OF ARMORED HULLS OF LIGHTLY ARMORED VEHICLES MADE OF UNCONVENTIONAL, SURFACE-HARDENED MATERIALS AND COMPOSITIONS
The work develops a new approach to the analysis of the stress-strain state of armored hulls of lightly armored vehicles made of unconventional, surface-hardened materials and compositions. Based on computational-experimental and computational-calculation studies, it is proposed to create express models of the stress-strain state of these armored hulls. In particular, multilayer compositions "steel-ceramics-steel", "steel-woven material" with different alternation of layers with properties that determine certain service characteristics of the armored hull are considered. We are talking about ballistic, anti-mine and anti-fragmentation (secondary fragments) resistance. In addition, the criteria for strength, rigidity and stability of armored hulls of lightly armored vehicles are taken into account. In particular, these characteristics affect the dynamic excitability from the action of reactive recoil forces when firing from high-speed weapons, including small-caliber automatic guns. Also important is the impact on disturbances in the guidance and stabilization channels of weapons that arise as a result of deformation of armored hulls. From the point of view of stability, the effect of excess pressure of the shock wave from explosions of high-explosive charges on the armored hull is of interest. Ultimately, the armored hull must also perform a supporting function for all systems and assemblies of a lightly armored vehicle. Thus, the problem arises of performing a large volume of design calculations to substantiate progressive technical solutions for armored hulls made of unconventional, surface-hardened materials and compositions. At the same time, the problem arises of constructing computational models of the stress-strain state of such armored hulls based on the criterion of balancing the accuracy and timing of multivariate calculations. With the involvement of generalized parametric modeling, it is proposed to determine acceptable express models from unconventional, surface-strengthened materials and compositions. That is, an express model is being built that meets the requirements for the accuracy of results and the duration of calculations. It creates opportunities at the first stages of design research to achieve progress in meeting competing requirements for armored hulls of lightly armored vehicles with increased tactical and technical characteristics
- 24 April 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 1,p. 133-151
Open AccessMETHODOLOGY OF DESIGN RESEARCH OF ARMORED HULLS OF LIGHTLY ARMORED VEHICLES MADE OF UNCONVENTIONAL, SURFACE-HARDENED MATERIALS AND COMPOSITIONS
The work develops a new approach to the analysis of the stress-strain state of armored hulls of lightly armored vehicles made of unconventional, surface-hardened materials and compositions. Based on computational-experimental and computational-calculation studies, it is proposed to create express models of the stress-strain state of these armored hulls. In particular, multilayer compositions "steel-ceramics-steel", "steel-woven material" with different alternation of layers with properties that determine certain service characteristics of the armored hull are considered. We are talking about ballistic, anti-mine and anti-fragmentation (secondary fragments) resistance. In addition, the criteria for strength, rigidity and stability of armored hulls of lightly armored vehicles are taken into account. In particular, these characteristics affect the dynamic excitability from the action of reactive recoil forces when firing from high-speed weapons, including small-caliber automatic guns. Also important is the impact on disturbances in the guidance and stabilization channels of weapons that arise as a result of deformation of armored hulls. From the point of view of stability, the effect of excess pressure of the shock wave from explosions of high-explosive charges on the armored hull is of interest. Ultimately, the armored hull must also perform a supporting function for all systems and assemblies of a lightly armored vehicle. Thus, the problem arises of performing a large volume of design calculations to substantiate progressive technical solutions for armored hulls made of unconventional, surface-hardened materials and compositions. At the same time, the problem arises of constructing computational models of the stress-strain state of such armored hulls based on the criterion of balancing the accuracy and timing of multivariate calculations. With the involvement of generalized parametric modeling, it is proposed to determine acceptable express models from unconventional, surface-strengthened materials and compositions. That is, an express model is being built that meets the requirements for the accuracy of results and the duration of calculations. It creates opportunities at the first stages of design research to achieve progress in meeting competing requirements for armored hulls of lightly armored vehicles with increased tactical and technical characteristics
- Open Access
- 29 October 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 2,p. 115-130
JUSTIFICATION OF DESIGN PARAMETERS OF ARMORED HULLS OF LIGHT ARMORED VEHICLES BASED ON A SET OF TACTICAL AND TECHNICAL CHARACTERISTICS
Modern combat conditions drastically change the requirements for the tactical and technical characteristics of lightly armored vehicles. This includes, in particular, the requirements for protection indicators against various arms. Importantly, the number of damaging factors is rapidly increasing, and their impact on protection is intensifying. Specifically, the armored hull of a lightly armored vehicle must provide protection against shock waves generated by explosive munitions. Additionally, the requirements for resistance to kinetic and shaped-charge munitions are significantly increasing. Furthermore, deformation of the armored hull must cause minimal disruption to the targeting a nd stabilization systems of the combat module's weaponry. This set of requirements necessitates the study of various physical and mechanical processes and states that occur in the armored hulls of lightly armored vehicles during combat use. On the other hand, to justify effective design solutions, it is necessary to build parametric models of the armored hulls under study. This set of tasks requires, first and foremost, the creation of such parametric models of armored hulls that, on one hand, allow for the study of various physical and mechanical processes and states within them, and on the other hand, make it possible to determine specific components of the tactical and technical characteristics of lightly armored vehicles during these studies. Such a research methodology has been developed. It was tested in solving a number of basic tasks related to the armored hulls of lightly armored vehicles with arbitrarily chosen design parameters. The capabilities of the developed approach were demonstrated. Directions for further research into the processes and states in the armored hulls of lightly armored vehicles were identified, based on the criteria for ensuring the necessary tactical and technical characteristics of these vehicles.
- 29 October 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
- No. 2,p. 115-130
Open AccessJUSTIFICATION OF DESIGN PARAMETERS OF ARMORED HULLS OF LIGHT ARMORED VEHICLES BASED ON A SET OF TACTICAL AND TECHNICAL CHARACTERISTICS
Modern combat conditions drastically change the requirements for the tactical and technical characteristics of lightly armored vehicles. This includes, in particular, the requirements for protection indicators against various arms. Importantly, the number of damaging factors is rapidly increasing, and their impact on protection is intensifying. Specifically, the armored hull of a lightly armored vehicle must provide protection against shock waves generated by explosive munitions. Additionally, the requirements for resistance to kinetic and shaped-charge munitions are significantly increasing. Furthermore, deformation of the armored hull must cause minimal disruption to the targeting a nd stabilization systems of the combat module's weaponry. This set of requirements necessitates the study of various physical and mechanical processes and states that occur in the armored hulls of lightly armored vehicles during combat use. On the other hand, to justify effective design solutions, it is necessary to build parametric models of the armored hulls under study. This set of tasks requires, first and foremost, the creation of such parametric models of armored hulls that, on one hand, allow for the study of various physical and mechanical processes and states within them, and on the other hand, make it possible to determine specific components of the tactical and technical characteristics of lightly armored vehicles during these studies. Such a research methodology has been developed. It was tested in solving a number of basic tasks related to the armored hulls of lightly armored vehicles with arbitrarily chosen design parameters. The capabilities of the developed approach were demonstrated. Directions for further research into the processes and states in the armored hulls of lightly armored vehicles were identified, based on the criteria for ensuring the necessary tactical and technical characteristics of these vehicles.
- 17 July 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 1,p. 119-128
ANALYSIS AND PROSPECTS FOR THE DEVELOPMENT OF TRANSMISSION STRUCTURES FOR CHAIN EARTHMOVING MACHINERY OF ENGINEERING AND CONSTRUCTION EQUIPMENT
The article presents a comprehensive analysis of the current state and development trends of transmission systems used in chain-type trenching machines, which are widely employed in construction, utilities, energy, and defense sectors. The study highlights the operational specifics of continuous-action chain working bodies, which impose unique requirements on transmissions – particularly in terms of traction force stability, smooth operation, energy efficiency, and reliability under challenging working conditions. The advantages and disadvantages of mechanical, hydraulic, and combined transmission systems used in modern machines by leading global manufacturers are assessed. Special attention is given to the prospects of applying hydrostatic-mechanical transmissions (HMTs) and electrohydraulic control systems, which enable flexible speed and load regulation. A promising direction is identified in the implementation of continuously variable transmissions (CVTs) as an effective solution for improving energy performance, reducing dynamic loads, and expanding the range of operating modes. The integration of CVTs with hybrid power units is also considered, opening new opportunities for enhancing adaptability and environmental performance. The article substantiates the need for further research focused on optimizing transmission architectures, increasing the durability of drive components, and developing intelligent control systems for chain working body drives.
- 17 July 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
- No. 1,p. 119-128
ANALYSIS AND PROSPECTS FOR THE DEVELOPMENT OF TRANSMISSION STRUCTURES FOR CHAIN EARTHMOVING MACHINERY OF ENGINEERING AND CONSTRUCTION EQUIPMENT
The article presents a comprehensive analysis of the current state and development trends of transmission systems used in chain-type trenching machines, which are widely employed in construction, utilities, energy, and defense sectors. The study highlights the operational specifics of continuous-action chain working bodies, which impose unique requirements on transmissions – particularly in terms of traction force stability, smooth operation, energy efficiency, and reliability under challenging working conditions. The advantages and disadvantages of mechanical, hydraulic, and combined transmission systems used in modern machines by leading global manufacturers are assessed. Special attention is given to the prospects of applying hydrostatic-mechanical transmissions (HMTs) and electrohydraulic control systems, which enable flexible speed and load regulation. A promising direction is identified in the implementation of continuously variable transmissions (CVTs) as an effective solution for improving energy performance, reducing dynamic loads, and expanding the range of operating modes. The integration of CVTs with hybrid power units is also considered, opening new opportunities for enhancing adaptability and environmental performance. The article substantiates the need for further research focused on optimizing transmission architectures, increasing the durability of drive components, and developing intelligent control systems for chain working body drives.
- 10 June 2025
- Published by Springer Nature
- p. 468-477
Analysis of Changes in the Speed and Power Ranges of Dual-Flow On-Board Transmissions Based on the Power Adder Principle
- 10 June 2025
- Published by Springer Nature
- p. 468-477
Analysis of Changes in the Speed and Power Ranges of Dual-Flow On-Board Transmissions Based on the Power Adder Principle
- 9 August 2023
- Published by Springer Nature
- p. 263-271
Using Mathematical Modelling for Experimental Obtaining of Initial Data when Creating Digital Twins of Complex Technical Products
- 9 August 2023
- Published by Springer Nature
- p. 263-271
Using Mathematical Modelling for Experimental Obtaining of Initial Data when Creating Digital Twins of Complex Technical Products
- 16 June 2021
- Published by Springer Nature
- p. 201-212
The Choice of the Electric Energy Storage Device Type for the Hybrid Power Drive of Military Wheeled Vehicles
- 16 June 2021
- Published by Springer Nature
- p. 201-212
The Choice of the Electric Energy Storage Device Type for the Hybrid Power Drive of Military Wheeled Vehicles