Qinglin Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qinglin Jiang has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Yuguang Ma
State Key Laboratory of Luminescent Materials and Devices South China University of Technology Guangzhou P. R. China
6 shared publications Yanhua Jia
Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology , Guangzhou 510640 , China
4 shared publicationsJiaji Yang
Institute of Polymer Optoelectronic Materials and Devices, Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou, China
3 shared publications- Jiang Zhang
South China University of Technology
3 shared publications Bohan Wang
Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology , Guangzhou 510640 , China
2 shared publications- Fengxing Jiang
Jiangxi Science and Technology Normal University
2 shared publications
Latest Publications
- Open Access
- 12 November 2026
- Published by OAE Publishing Inc. in Soft Science
- Vol. 6 (4)
Conducting polymer-based soft robotics
- 12 November 2026
- Published by OAE Publishing Inc. in Soft Science
- Vol. 6 (4)
Open AccessConducting polymer-based soft robotics
- Open Access
- 15 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Achieving high-performance room-temperature organic ferromagnetic semiconductor films via topochemical reduction
The development of high-performance organic ferromagnetic semiconductors has been hampered by the intrinsic coupling of radical formation and structural organization during synthesis, which makes it difficult to achieve long-range magnetic coupling in highly conjugated systems. Here, we report an effective topochemical reduction strategy that decouples radical formation from structural organization, enabling unprecedented control over intermolecular arrangements in organic ferromagnetic materials. Using perylene diimide as a model system, this approach preserves the highly ordered structure of thermally evaporated precursor films during reduction, resulting in a shortened π-π stacking distance of 3.26 Å and exceptional long-range molecular order. The resulting films exhibit remarkable room-temperature ferromagnetism, as evidenced by X-ray magnetic circular dichroism, with a saturation magnetization of 10.5 emu g⁻ 1 —nearly an order of magnitude higher than conventional organic magnetic materials—while retaining semiconducting properties. Generality of this strategy has also been demonstrated in naphthalene-based systems, underscoring its broad applicability. Theoretical calculations reveal that this enhanced performance originates from optimized ferromagnetic coupling between adjacent radicals through controlled twisted stacking configurations. This work provides a practical route to high-performance ferromagnetic semiconductors.
- 15 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessAchieving high-performance room-temperature organic ferromagnetic semiconductor films via topochemical reduction
The development of high-performance organic ferromagnetic semiconductors has been hampered by the intrinsic coupling of radical formation and structural organization during synthesis, which makes it difficult to achieve long-range magnetic coupling in highly conjugated systems. Here, we report an effective topochemical reduction strategy that decouples radical formation from structural organization, enabling unprecedented control over intermolecular arrangements in organic ferromagnetic materials. Using perylene diimide as a model system, this approach preserves the highly ordered structure of thermally evaporated precursor films during reduction, resulting in a shortened π-π stacking distance of 3.26 Å and exceptional long-range molecular order. The resulting films exhibit remarkable room-temperature ferromagnetism, as evidenced by X-ray magnetic circular dichroism, with a saturation magnetization of 10.5 emu g⁻ 1 —nearly an order of magnitude higher than conventional organic magnetic materials—while retaining semiconducting properties. Generality of this strategy has also been demonstrated in naphthalene-based systems, underscoring its broad applicability. Theoretical calculations reveal that this enhanced performance originates from optimized ferromagnetic coupling between adjacent radicals through controlled twisted stacking configurations. This work provides a practical route to high-performance ferromagnetic semiconductors.
- Open Access
- 9 March 2026
- Published by Oxford University Press (OUP) in National Science Review
- Vol. 13 (11)
Soret-effect-induced thermoelectrics: confronting the efficiency bottleneck
- 9 March 2026
- Published by Oxford University Press (OUP) in National Science Review
- Vol. 13 (11)
Open AccessSoret-effect-induced thermoelectrics: confronting the efficiency bottleneck
- 9 February 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (3) , 1340-1349
Unveiling the sensing mechanism at the molecular level: a DFT study on the disaggregation of perylene diimide radical anion pimers
Density functional theory calculations reveal that low-barrier hydrogen bonds drive the disaggregation of perylene diimide radical anion pimers, offering a novel design strategy for π-radical-based organic sensors.
- 9 February 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (3) , 1340-1349
Unveiling the sensing mechanism at the molecular level: a DFT study on the disaggregation of perylene diimide radical anion pimers
Density functional theory calculations reveal that low-barrier hydrogen bonds drive the disaggregation of perylene diimide radical anion pimers, offering a novel design strategy for π-radical-based organic sensors.
- Open Access
- 8 March 2024
- Published by Oxford University Press (OUP) in National Science Review
- Vol. 11 (5) , nwae087
Band-like transport in solution-processed perylene diimide dianion films with high Hall mobility
It is crucial to prepare high-mobility organic polycrystalline film through solution processing. However, the delocalized carrier transport of polycrystalline films in organic semiconductors has rarely been investigated through Hall-effect measurement. This study presents a strategy for building strong intermolecular interactions to fabricate solution-crystallized p-type perylene diimide (PDI) dianion films with a closer intermolecular π–π stacking distance of 3.25 Å. The highly delocalized carriers enable a competitive Hall mobility of 3 cm2 V−1 s−1, comparable to that of the reported high-mobility organic single crystals. The PDI dianion films exhibit a high electrical conductivity of 17 S cm−1 and typical band-like transport, as evidenced by the negative temperature linear coefficient of mobility proportional to T−3/2. This work demonstrates that, as the intermolecular π–π interactions become strong enough, they will display high mobility and conductivity, providing a new approach to developing high-mobility organic semiconductor materials.
- 8 March 2024
- Published by Oxford University Press (OUP) in National Science Review
- Vol. 11 (5) , nwae087
Open AccessBand-like transport in solution-processed perylene diimide dianion films with high Hall mobility
It is crucial to prepare high-mobility organic polycrystalline film through solution processing. However, the delocalized carrier transport of polycrystalline films in organic semiconductors has rarely been investigated through Hall-effect measurement. This study presents a strategy for building strong intermolecular interactions to fabricate solution-crystallized p-type perylene diimide (PDI) dianion films with a closer intermolecular π–π stacking distance of 3.25 Å. The highly delocalized carriers enable a competitive Hall mobility of 3 cm2 V−1 s−1, comparable to that of the reported high-mobility organic single crystals. The PDI dianion films exhibit a high electrical conductivity of 17 S cm−1 and typical band-like transport, as evidenced by the negative temperature linear coefficient of mobility proportional to T−3/2. This work demonstrates that, as the intermolecular π–π interactions become strong enough, they will display high mobility and conductivity, providing a new approach to developing high-mobility organic semiconductor materials.
- 8 March 2023
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 39 (2) , 187-191
Electronic Characteristics of Perylene Diimide Anion Radical and Dianion Films by Quantitative Doping
- 8 March 2023
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 39 (2) , 187-191
Electronic Characteristics of Perylene Diimide Anion Radical and Dianion Films by Quantitative Doping
- Open Access
- 9 February 2023
- Published by Wiley in International Journal of Energy Research
- Vol. 2023, 1-10
Ultralong-Cycling and Free-Standing Carboxylated Graphene/PEDOT:PSS Films as Electrode for Flexible Supercapacitors
The rapid development of current wearable electronics motivates the promotion of energy storage devices. Supercapacitor with flexible, lightweight, highly efficient, and long cycling life is one of the potential and glittering candidates. Here, the composite film of carboxylated graphene (CG) and commercially available poly (3, 4-ethylene dioxythiophene): poly (styrene sulfonate) (PEDOT:PSS) are prepared as electrodes for flexible electrochemical capacitors by ultrasonication and vacuum filtration. The CG/PEDOT:PSS films were roundly characterized by SEM, XPS, FTIR, XRD and Raman spectrometer. The as-prepared free-standing films exhibited high specific capacitance (192.7Fg-1 at 0.5 A g-1), excellent rate capability (up to 80.4 from 0.5 to 20 A g-1), and good electrochemical stability (95.5 of specific capacitance retention after 50000 cycles). Surprisingly, the post treated free-standing films by Dimethyl Formamide (DMF) shows better capacitive properties than those of the pristine electrode, such as higher specific capacitance (204.3Fg-1 at 0.5 A g-1), and ultralong-cycling stability (104.6 retention at a high current density of 20 A g-1 after 50000 cycles). It is expected that the free-standing CG/PEDOT:PSS films can be used as flexible electrodes for various wearable energy storage devices.
- 9 February 2023
- Published by Wiley in International Journal of Energy Research
- Vol. 2023, 1-10
Open AccessUltralong-Cycling and Free-Standing Carboxylated Graphene/PEDOT:PSS Films as Electrode for Flexible Supercapacitors
The rapid development of current wearable electronics motivates the promotion of energy storage devices. Supercapacitor with flexible, lightweight, highly efficient, and long cycling life is one of the potential and glittering candidates. Here, the composite film of carboxylated graphene (CG) and commercially available poly (3, 4-ethylene dioxythiophene): poly (styrene sulfonate) (PEDOT:PSS) are prepared as electrodes for flexible electrochemical capacitors by ultrasonication and vacuum filtration. The CG/PEDOT:PSS films were roundly characterized by SEM, XPS, FTIR, XRD and Raman spectrometer. The as-prepared free-standing films exhibited high specific capacitance (192.7Fg-1 at 0.5 A g-1), excellent rate capability (up to 80.4 from 0.5 to 20 A g-1), and good electrochemical stability (95.5 of specific capacitance retention after 50000 cycles). Surprisingly, the post treated free-standing films by Dimethyl Formamide (DMF) shows better capacitive properties than those of the pristine electrode, such as higher specific capacitance (204.3Fg-1 at 0.5 A g-1), and ultralong-cycling stability (104.6 retention at a high current density of 20 A g-1 after 50000 cycles). It is expected that the free-standing CG/PEDOT:PSS films can be used as flexible electrodes for various wearable energy storage devices.
- 1 January 2022
- Published by IOP Publishing in Chinese Physics B
- Vol. 31 (2) , 027302
Enhanced thermoelectric performance of PEDOT: PSS films via ionic liquid post-treatment
Thermoelectric (TE) energy harvesting can effectively convert waste heat into electricity, which is a crucial technology to solve energy concerns. As a promising candidate for energy conversion, poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT:PSS) has gained significant attention owing to its easy doping, high transparency, and solution processability. However, the TE performance of PEDOT:PSS still needs to be further enhanced. Herein, different approaches have been applied for tuning the TE properties: (i) direct dipping PEDOT:PSS thin films in ionic liquid; (ii) post-treatment of the films with concentrated sulfuric acid (H2SO4), and then dipping in ionic liquid. Besides, the same bis(trifluoromethanesulfonyl)amide (TFSI) anion and different cation salts, including 1-ethyl-3-methylimidazolium (EMIM+) and lithium (Li+), are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS. The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously, and the resulting maximum power factor is 46.7 μW⋅m−1⋅K–2, which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT. The work provides a reference for the development of organic films with high TE properties.
- 1 January 2022
- Published by IOP Publishing in Chinese Physics B
- Vol. 31 (2) , 027302
Enhanced thermoelectric performance of PEDOT: PSS films via ionic liquid post-treatment
Thermoelectric (TE) energy harvesting can effectively convert waste heat into electricity, which is a crucial technology to solve energy concerns. As a promising candidate for energy conversion, poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT:PSS) has gained significant attention owing to its easy doping, high transparency, and solution processability. However, the TE performance of PEDOT:PSS still needs to be further enhanced. Herein, different approaches have been applied for tuning the TE properties: (i) direct dipping PEDOT:PSS thin films in ionic liquid; (ii) post-treatment of the films with concentrated sulfuric acid (H2SO4), and then dipping in ionic liquid. Besides, the same bis(trifluoromethanesulfonyl)amide (TFSI) anion and different cation salts, including 1-ethyl-3-methylimidazolium (EMIM+) and lithium (Li+), are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS. The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously, and the resulting maximum power factor is 46.7 μW⋅m−1⋅K–2, which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT. The work provides a reference for the development of organic films with high TE properties.
- Top Cited Papers
- 5 September 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (42) , 2102990
Wearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems
The emergence of artificial intelligence and the Internet of Things has led to a growing demand for wearable and maintenance‐free power sources. The continual push toward lower operating voltages and power consumption in modern integrated circuits has made the development of devices powered by body heat finally feasible. In this context, thermoelectric (TE) materials have emerged as promising candidates for the effective conversion of body heat into electricity to power wearable devices without being limited by environmental conditions. Driven by rapid advances in processing technology and the performance of TE materials over the past two decades, wearable thermoelectric generators (WTEGs) have gradually become more flexible and stretchable so that they can be used on complex and dynamic surfaces. In this review, the functional materials, processing techniques, and strategies for the device design of different types of WTEGs are comprehensively covered. Wearable self‐powered systems based on WTEGs are summarized, including multi‐function TE modules, hybrid energy harvesting, and all‐in‐one energy devices. Challenges in organic TE materials, interfacial engineering, and assessments of device performance are discussed, and suggestions for future developments in the area are provided. This review will promote the rapid implementation of wearable TE materials and devices in self‐powered electronic systems.
- 5 September 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (42) , 2102990
Top Cited PapersWearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems
The emergence of artificial intelligence and the Internet of Things has led to a growing demand for wearable and maintenance‐free power sources. The continual push toward lower operating voltages and power consumption in modern integrated circuits has made the development of devices powered by body heat finally feasible. In this context, thermoelectric (TE) materials have emerged as promising candidates for the effective conversion of body heat into electricity to power wearable devices without being limited by environmental conditions. Driven by rapid advances in processing technology and the performance of TE materials over the past two decades, wearable thermoelectric generators (WTEGs) have gradually become more flexible and stretchable so that they can be used on complex and dynamic surfaces. In this review, the functional materials, processing techniques, and strategies for the device design of different types of WTEGs are comprehensively covered. Wearable self‐powered systems based on WTEGs are summarized, including multi‐function TE modules, hybrid energy harvesting, and all‐in‐one energy devices. Challenges in organic TE materials, interfacial engineering, and assessments of device performance are discussed, and suggestions for future developments in the area are provided. This review will promote the rapid implementation of wearable TE materials and devices in self‐powered electronic systems.
- Open Access
- 1 January 2021
- Published by OAE Publishing Inc. in Soft Science
- Vol. 1 (2) , 12
Unraveling the main chain effects of fused thiophene conjugated polymers in electrochromism
The past decade has witnessed an emerging and fast-growing field on mechanically soft systems, ranging from soft materials (e.g. hydrogels) to soft devices (e.g. flexible electronics), and to soft functional systems (e.g. soft robotics). It is envisioned that soft systems will continue to thrive in the coming decades in academia and industrial communities. The launch of Soft Science is to provide the first dedicated platform for publishing research findings and to share the knowledge among the communities.
- 1 January 2021
- Published by OAE Publishing Inc. in Soft Science
- Vol. 1 (2) , 12
Open AccessUnraveling the main chain effects of fused thiophene conjugated polymers in electrochromism
The past decade has witnessed an emerging and fast-growing field on mechanically soft systems, ranging from soft materials (e.g. hydrogels) to soft devices (e.g. flexible electronics), and to soft functional systems (e.g. soft robotics). It is envisioned that soft systems will continue to thrive in the coming decades in academia and industrial communities. The launch of Soft Science is to provide the first dedicated platform for publishing research findings and to share the knowledge among the communities.