Peter Risby Andersen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peter Risby Andersen has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Vicente Cutanda Henriquez
Centre for Acoustic-Mechanical Micro Systems, Technical University of Denmark, Ørsteds Plads, Building 352, DK-2800, Kgs. Lyngby, Denmark
7 shared publications - Niels Aage
Department of Mechanical Engineering, Technical University of Denmark, Kgs. Lyngby, Denmark
4 shared publications - Jakob Sondergaard Jensen
Technical University of Denmark
2 shared publications - Peter Møller Juhl
Institute of Sensors, Signals and Electrotechnics, University of Southern Denmark, Niels Bohrs Allé 1, 5230 Odense S, Denmark
2 shared publications J. Sánchez-Dehesa
Wave Phenomena Group, Department of Electronic Engineering, Universitat Politècnica de València, Camino de vera s.n. (Building 7F), ES-46022 Valencia, Spain
1 shared publication- José Sánchez-Dehesa
Universitat Politècnica de València
1 shared publication
Latest Publications
- 26 April 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 32 (02)
A Reduced Order Series Expansion for the BEM Incorporating the Boundary Layer Impedance Condition
When modeling sound waves in fluids it can be important to include the viscous and thermal losses originating from the fluids’ interaction with boundaries. In the audible frequency range, the thickness of the boundary layers is between a micrometer and a millimeter. As such the viscous and thermal losses are important when simulating the properties of small acoustical devices such as e.g. hearing aids or transducers. However, the inclusion of viscous and thermal losses is a computationally demanding task as it requires a fine discretization of the boundary layer in order to fully capture the complicated physical phenomena happening on the microscale. Recently, there has been developments to ease the computational demands using both the Finite Element Method and the Boundary Element Method, by approximating the losses using the Boundary Layer Impedance (BLI) boundary condition. In this paper, we extend previous developments for multi-frequency analysis using the Reduced Order Series Expansion Boundary Element Method to handle the BLI condition. This model follows a two-step procedure: Using a series expansion to decrease the assembly time of the BEM matrices and a projection to reduce the overall memory consumption of the model. Results from two acoustic interior problems show that the model decreases the total computational time by around 96% while using less than 15% of the memory. For both test setups the limiting factor of the accuracy was the reduction and not the series expansion.
- 26 April 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 32 (02)
A Reduced Order Series Expansion for the BEM Incorporating the Boundary Layer Impedance Condition
When modeling sound waves in fluids it can be important to include the viscous and thermal losses originating from the fluids’ interaction with boundaries. In the audible frequency range, the thickness of the boundary layers is between a micrometer and a millimeter. As such the viscous and thermal losses are important when simulating the properties of small acoustical devices such as e.g. hearing aids or transducers. However, the inclusion of viscous and thermal losses is a computationally demanding task as it requires a fine discretization of the boundary layer in order to fully capture the complicated physical phenomena happening on the microscale. Recently, there has been developments to ease the computational demands using both the Finite Element Method and the Boundary Element Method, by approximating the losses using the Boundary Layer Impedance (BLI) boundary condition. In this paper, we extend previous developments for multi-frequency analysis using the Reduced Order Series Expansion Boundary Element Method to handle the BLI condition. This model follows a two-step procedure: Using a series expansion to decrease the assembly time of the BEM matrices and a projection to reduce the overall memory consumption of the model. Results from two acoustic interior problems show that the model decreases the total computational time by around 96% while using less than 15% of the memory. For both test setups the limiting factor of the accuracy was the reduction and not the series expansion.
- Open Access
- 30 November 2022
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 547
On the validity of numerical models for viscothermal losses in structural optimization for micro-acoustics
- 30 November 2022
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 547
Open AccessOn the validity of numerical models for viscothermal losses in structural optimization for micro-acoustics
- 1 May 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 447, 120-136
Shape optimization of micro-acoustic devices including viscous and thermal losses
- 1 May 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 447, 120-136
Shape optimization of micro-acoustic devices including viscous and thermal losses
- Open Access
- 27 September 2018
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 26 (03)
A Two-Dimensional Acoustic Tangential Derivative Boundary Element Method Including Viscous and Thermal Losses
In recent years, the boundary element method has shown to be an interesting alternative to the finite element method for modeling of viscous and thermal acoustic losses. Current implementations rely on finite-difference tangential pressure derivatives for the coupling of the fundamental equations, which can be a shortcoming of the method. This finite-difference coupling method is removed here and replaced by an extra set of tangential derivative boundary element equations. Increased stability and error reduction is demonstrated by numerical experiments.
- 27 September 2018
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 26 (03)
Open AccessA Two-Dimensional Acoustic Tangential Derivative Boundary Element Method Including Viscous and Thermal Losses
In recent years, the boundary element method has shown to be an interesting alternative to the finite element method for modeling of viscous and thermal acoustic losses. Current implementations rely on finite-difference tangential pressure derivatives for the coupling of the fundamental equations, which can be a shortcoming of the method. This finite-difference coupling method is removed here and replaced by an extra set of tangential derivative boundary element equations. Increased stability and error reduction is demonstrated by numerical experiments.
- 27 September 2018
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 26 (03)
A Three-Dimensional Acoustic Boundary Element Method Formulation with Viscous and Thermal Losses Based on Shape Function Derivatives
Sound waves in fluids are subject to viscous and thermal losses, which are particularly relevant in the so-called viscous and thermal boundary layers at the boundaries, with thicknesses in the micrometer range at audible frequencies. Small devices such as acoustic transducers or hearing aids must then be modeled with numerical methods that include losses. In recent years, versions of both the Finite Element Method (FEM) and the Boundary Element Method (BEM) including viscous and thermal losses have been developed. This paper deals with an improved formulation in three dimensions of the BEM with losses which avoids the calculation of tangential derivatives on the surface by finite differences used in a previous BEM implementation. Instead, the tangential derivatives are obtained from the element shape functions. The improved implementation is demonstrated using an oscillating sphere, where an analytical solution exists, and a condenser microphone as test cases.
- 27 September 2018
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 26 (03)
A Three-Dimensional Acoustic Boundary Element Method Formulation with Viscous and Thermal Losses Based on Shape Function Derivatives
Sound waves in fluids are subject to viscous and thermal losses, which are particularly relevant in the so-called viscous and thermal boundary layers at the boundaries, with thicknesses in the micrometer range at audible frequencies. Small devices such as acoustic transducers or hearing aids must then be modeled with numerical methods that include losses. In recent years, versions of both the Finite Element Method (FEM) and the Boundary Element Method (BEM) including viscous and thermal losses have been developed. This paper deals with an improved formulation in three dimensions of the BEM with losses which avoids the calculation of tangential derivatives on the surface by finite differences used in a previous BEM implementation. Instead, the tangential derivatives are obtained from the element shape functions. The improved implementation is demonstrated using an oscillating sphere, where an analytical solution exists, and a condenser microphone as test cases.
- Open Access
- 21 November 2017
- Published by World Scientific Pub Co Pte Ltd in Journal of Computational Acoustics
- Vol. 25 (04) , 1750006
A Numerical Model of an Acoustic Metamaterial Using the Boundary Element Method Including Viscous and Thermal Losses
In recent years, boundary element method (BEM) and finite element method (FEM) implementations of acoustics in fluids with viscous and thermal losses have been developed. They are based on the linearized Navier–Stokes equations with no flow. In this paper, such models with acoustic losses are applied to an acoustic metamaterial. Metamaterials are structures formed by smaller, usually periodic, units showing remarkable physical properties when observed as a whole. Acoustic losses are relevant in metamaterials in the millimeter scale. In addition, their geometry is intricate and challenging for numerical implementation. The results are compared with existing measurements.
- 21 November 2017
- Published by World Scientific Pub Co Pte Ltd in Journal of Computational Acoustics
- Vol. 25 (04) , 1750006
Open AccessA Numerical Model of an Acoustic Metamaterial Using the Boundary Element Method Including Viscous and Thermal Losses
In recent years, boundary element method (BEM) and finite element method (FEM) implementations of acoustics in fluids with viscous and thermal losses have been developed. They are based on the linearized Navier–Stokes equations with no flow. In this paper, such models with acoustic losses are applied to an acoustic metamaterial. Metamaterials are structures formed by smaller, usually periodic, units showing remarkable physical properties when observed as a whole. Acoustic losses are relevant in metamaterials in the millimeter scale. In addition, their geometry is intricate and challenging for numerical implementation. The results are compared with existing measurements.