Prashant Shivaji Shewale
Prashant Shivaji Shewale has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Y.S. Yu
10 shared publicationsJ.H. Kim
5 shared publications- Kwang-Seok Yun
Sogang University
5 shared publications M D Uplane
5 shared publicationsS.H. Lee
5 shared publicationsA.V. Moholkar
3 shared publications
Latest Publications
- Open Access
- 30 July 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (8) , 979
Editorial for the Special Issue on Graphene-Nanocomposite-Based Flexible Supercapacitors
The evolution of hybrid materials has revolutionized the field of material science, particularly with the development of nanocomposites
- 30 July 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (8) , 979
Open AccessEditorial for the Special Issue on Graphene-Nanocomposite-Based Flexible Supercapacitors
The evolution of hybrid materials has revolutionized the field of material science, particularly with the development of nanocomposites
- Open Access
- 26 March 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (4) , 852
NiCo2O4/RGO Hybrid Nanostructures on Surface-Modified Ni Core for Flexible Wire-Shaped Supercapacitor
In this work, we report surface-modified nickel (Ni) wire/NiCo2O4/reduced graphene oxide (Ni/NCO/RGO) electrodes fabricated by a combination of facile solvothermal and hydrothermal deposition methods for wire-shaped supercapacitor application. The effect of Ni wire etching on the microstructural, surface morphological and electrochemical properties of Ni/NCO/RGO electrodes was investigated in detail. On account of the improved hybrid nanostructure and the synergistic effect between spinel-NiCo2O4 hollow microspheres and RGO nanoflakes, the electrode obtained from Ni wire etched for 10 min, i.e., Ni10/NCO/RGO exhibits the lowest initial equivalent resistance (1.68 Ω), and displays a good rate capability with a volumetric capacitance (2.64 F/cm3) and areal capacitance (25.3 mF/cm2). Additionally, the volumetric specific capacitance calculated by considering only active material volume was found to be as high as 253 F/cm3. It is revealed that the diffusion-controlled process related to faradaic volume processes (battery type) contributed significantly to the surface-controlled process of the Ni10/NCO/RGO electrode compared to other electrodes that led to the optimum electrochemical performance. Furthermore, the wire-shaped supercapacitor (WSC) was fabricated by assembling two optimum electrodes in-twisted structure with gel electrolyte and the device exhibited 10 μWh/cm3 (54 mWh/kg) energy density and 4.95 mW/cm3 (27 W/kg) power density at 200 μA. Finally, the repeatability, flexibility, and scalability of WSCs were successfully demonstrated at various device lengths and bending angles.
- 26 March 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (4) , 852
Open AccessNiCo2O4/RGO Hybrid Nanostructures on Surface-Modified Ni Core for Flexible Wire-Shaped Supercapacitor
In this work, we report surface-modified nickel (Ni) wire/NiCo2O4/reduced graphene oxide (Ni/NCO/RGO) electrodes fabricated by a combination of facile solvothermal and hydrothermal deposition methods for wire-shaped supercapacitor application. The effect of Ni wire etching on the microstructural, surface morphological and electrochemical properties of Ni/NCO/RGO electrodes was investigated in detail. On account of the improved hybrid nanostructure and the synergistic effect between spinel-NiCo2O4 hollow microspheres and RGO nanoflakes, the electrode obtained from Ni wire etched for 10 min, i.e., Ni10/NCO/RGO exhibits the lowest initial equivalent resistance (1.68 Ω), and displays a good rate capability with a volumetric capacitance (2.64 F/cm3) and areal capacitance (25.3 mF/cm2). Additionally, the volumetric specific capacitance calculated by considering only active material volume was found to be as high as 253 F/cm3. It is revealed that the diffusion-controlled process related to faradaic volume processes (battery type) contributed significantly to the surface-controlled process of the Ni10/NCO/RGO electrode compared to other electrodes that led to the optimum electrochemical performance. Furthermore, the wire-shaped supercapacitor (WSC) was fabricated by assembling two optimum electrodes in-twisted structure with gel electrolyte and the device exhibited 10 μWh/cm3 (54 mWh/kg) energy density and 4.95 mW/cm3 (27 W/kg) power density at 200 μA. Finally, the repeatability, flexibility, and scalability of WSCs were successfully demonstrated at various device lengths and bending angles.
- Open Access
Fiber-Shaped Supercapacitors Fabricated Using Hierarchical Nanostructures of NiCo2O4 Nanoneedles and MnO2 Nanoflakes on Roughened Ni Wire
Electrostatic capacitors have high power density but low energy density. In contrast, batteries and fuel cells have high energy density but low power density. However, supercapacitors can simultaneously achieve both high power density and energy density. Herein, we propose a supercapacitor, in which etched nickel wire was used as a current collector due to its high conductivity. Two redox reactive materials, MnO2 nanoflakes and NiCo2O4 nanoneedles, were used in a hierarchical structure to cover the roughened surface of the Ni wire to maximize the effective surface area. Thus, a specific capacitance, energy density, and power density of 14.4 F/cm3, 2 mWh/cm3, and 0.1 W/cm3, respectively, was obtained via single-electrode experiments. A fiber-shaped supercapacitor was prepared by twisting two electrodes with solid electrolytes made of KOH and polyvinyl alcohol. Although the solid electrolyte had a low ionic conductivity, the energy density and power density were determined to be 0.97 mWh/cm3 and 49.8 mW/cm3, respectively.
Open AccessFiber-Shaped Supercapacitors Fabricated Using Hierarchical Nanostructures of NiCo2O4 Nanoneedles and MnO2 Nanoflakes on Roughened Ni Wire
Electrostatic capacitors have high power density but low energy density. In contrast, batteries and fuel cells have high energy density but low power density. However, supercapacitors can simultaneously achieve both high power density and energy density. Herein, we propose a supercapacitor, in which etched nickel wire was used as a current collector due to its high conductivity. Two redox reactive materials, MnO2 nanoflakes and NiCo2O4 nanoneedles, were used in a hierarchical structure to cover the roughened surface of the Ni wire to maximize the effective surface area. Thus, a specific capacitance, energy density, and power density of 14.4 F/cm3, 2 mWh/cm3, and 0.1 W/cm3, respectively, was obtained via single-electrode experiments. A fiber-shaped supercapacitor was prepared by twisting two electrodes with solid electrolytes made of KOH and polyvinyl alcohol. Although the solid electrolyte had a low ionic conductivity, the energy density and power density were determined to be 0.97 mWh/cm3 and 49.8 mW/cm3, respectively.
- 1 February 2019
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 774, 461-470
Effects of annealing temperature of spin-coated ZnO seed-layer on UV photo-sensing properties of PLD grown ZnO: Mg thin films
- 1 February 2019
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 774, 461-470
Effects of annealing temperature of spin-coated ZnO seed-layer on UV photo-sensing properties of PLD grown ZnO: Mg thin films
- 1 May 2018
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 744, 849-858
UV sensitive pulsed laser deposited ZnO thin films: Influence of growth temperature
- 1 May 2018
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 744, 849-858
UV sensitive pulsed laser deposited ZnO thin films: Influence of growth temperature
- 1 November 2017
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 725, 1106-1114
Pulse repetition rate dependent structural, surface morphological and optoelectronic properties of Ga-doped ZnO thin films grown by pulsed laser deposition
- 1 November 2017
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 725, 1106-1114
Pulse repetition rate dependent structural, surface morphological and optoelectronic properties of Ga-doped ZnO thin films grown by pulsed laser deposition
- 1 April 2017
- Published by Elsevier in Ceramics International
- Vol. 43 (5) , 4175-4182
UV photodetection properties of pulsed laser deposited Cu-doped ZnO thin film
- 1 April 2017
- Published by Elsevier in Ceramics International
- Vol. 43 (5) , 4175-4182
UV photodetection properties of pulsed laser deposited Cu-doped ZnO thin film