AAA. Alcazar

A. Alcazar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


A. Alcazar has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Photovoltaic laser beam degradation in lithium niobate planar waveguides: two-center model approach

    by A. Alcázar, J. Ramiro, A. Méndez, J. Villarroel, M. Carrascosa, A. García-Cabañes, J. M. Cabrera

    Photovoltaic laser beam degradation in lithium niobate (LiNbO3) has been investigated through a finite-differences beam propagation method for nonlinear media. The simulations use a two-center model (Fe2+↔Fe3+, NbLi4+↔NbLi5+) that has been recently proved to be necessary to successfully describe the photorefractive effect in nominally pure LiNbO3. Refractive index profiles and intensity and phase beam profiles have been calculated for a wide intensity range and several material distances. A good agreement is obtained on comparing simulations and experimental data. This includes self-defocusing for moderate intensities and the complex beam profile structures appearing for high intensities, providing a complete description of this nonlinear optical phenomenon.

  • Particle trapping and structuring on the surface of LiNbO_3:Fe optical waveguides using photovoltaic fields

    by M. Jubera, A. García-Cabañes, J. Olivares, A. Alcazar, M. Carrascosa

    We report on the successful trapping and patterning of micro- and nanometric particles on the surface of LiNbO3 optical waveguides via photovoltaic tweezers. A waveguide configuration is used for the first time combined with this recently proposed technique. The electric field pattern is generated by light propagating in the waveguide, allowing us to separate the light channel with the region in which particles are deposited. Results on micro- and nanoparticle trapping, by two different deposition methods on two types of planar waveguides (by soft proton exchanged and by swift heavy ion irradiation), and using single-beam and two-beam interferometric configuration, are presented and discussed.


  • Photorefractive non-linear single beam propagation in LiNbO3 waveguides above the optical damage threshold

    by J. Villarroel, O. Caballero-Calero, B. Ramiro, A. Alcázar, A. García-Cabañes, M. Carrascosa


  • Analysis of photorefractive optical damage in lithium niobate: application to planar waveguides

    by J. Villarroel, J. Carnicero, F. Luedtke, M. Carrascosa, A. García-Cabañes, J. M. Cabrera, A. Alcazar, B. Ramiro

    Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.


  • Light-intensity measurements in optical waveguides using prism couplers

    by O. Caballero-Calero, J. Carnicero, A. Alcazar, G. de la Paliza, A. García-Cabañes, M. Carrascosa, J. M. Cabrera

    In view of its central role in many optical waveguide applications, the absolute measurement of the actual light intensity propagating within a planar waveguide has been critically revised. Using prism couplers and proton exchanged LiNbO3 waveguides, several approaches have been experimentally checked and compared. A method is proposed and demonstrated, which combines the measurements of the light power out coupled from the waveguide edge and from the output prism. Reliable power measurements are obtained within a 5% error. A simplified version consists in a previous calibration of the setup in order to measure only the power coming from output coupler. Although inaccuracy rises up to ∼15% , it can be useful in many practical applications because of its simplicity. To assess and compare both methods, they have been applied to the measurement of light-intensity dependences of photovoltaic currents and optical damage thresholds in proton exchanged LiNbO3 guides.


  • Optical damage in x-cut proton exchanged LiNbO3 planar waveguides

    by O. Caballero-Calero, A. García-Cabañes, J. M. Cabrera, M. Carrascosa, A. Alcázar

    The optical damage of different proton exchanged LiNbO3 planar waveguides has been experimentally studied by measuring the intensity output of a single beam as a function of the intensity input. Parallel measurements of photovoltaic currents (sometimes referred to as photocurrents) have been carried out with the same setup as a function of the input intensity and they have been correlated to the optical damage data. The following proton exchanged phases have been studied and compared with the substrate: α , β1 , β2 , and reverse proton exchanged (RPE). The greatest intensity thresholds for optical damage, about 2×103 times greater than that of the substrate, have been obtained in RPE guides supporting ordinary polarization and in β1,2 guides which support extraordinary polarization. On the other hand, the lowest photovoltaic currents have been measured in β1,2 phases. As a function of the light intensity, the strong superlinear behavior exhibited by the photovoltaic current in the α phase is almost absent in the others. In addition, it has been experimentally ascertained that a scattering increase produces a decrease of the threshold intensity for optical damage. The role of those different effects is discussed extensively together with the electro-optic properties of the different guides.


  • Comparative study of optical damage and photovoltaic currents in planar LiNbO 3 waveguides

    by O. Caballero, A. Alcazar, J. Herrero, J. Carnicero, C. Ong, M. Domenech, G. Lifante, A. Garcia-Cabanes, J. M. Cabrera, M. Carrascosa

    The optical damage behaviour of different LiNbO3 optical waveguides has been experimentally studied by measuring the intensity output of a single beam as a function of the intensity input. Parallel measurements of photovoltaic currents have been carried out as a function of the input intensity and they have been correlated with the optical damage data. The following LiNbO3 guides have been studied and compared: proton exchanged (PE) belonging to the phases alpha, beta1, beta2 and reverse proton exchanged (RPE), and Zn in-diffused waveguides. The greatest intensity thresholds for optical damage, about 2x103 times greater than that of the substrate, have been obtained in RPE guides (they support ordinary polarization and have similar nonlinear optic activity as the substrate) and beta2 guides which support extraordinary polarization (they have no nonlinear optic activity). On the other hand, the lowest photovoltaic currents have been measured in beta1,2-phases. As a function of the light intensity, the photovoltaic current exhibits a superlinear behaviour, strong in alpha-phase and weaker in Zn in-diffused and RPE guides. The results for optical damage are discussed in connection with those of photovoltaic currents, paying particular attention to the main mechanisms involved.


  • Optical damage inhibition and thresholding effects in lithium niobate above room temperature

    by J. Rams, A. Alcázar-De-Velasco, M. Carrascosa, J.M. Cabrera, F. Agulló-López