Kalpathy B. Sundaram
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kalpathy B. Sundaram has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Ashwin Kumar Saikumar
University of Central Florida
5 shared publications - Sreeram Sundaresh
Department of Electrical and Computer Engineering, University of Central Florida, 4328 Scorpius Street, Orlando, Florida, 32816-2368, UNITED STATES
5 shared publications - Shraddha Dhanraj Nehate
Department of Electrical and Computer Engineering, University of Central Florida, Orlando, Florida 32816, United States of America
4 shared publications - Akash Hari Bharath
University of Central Florida
1 shared publication - Andrew P. Warren
Plasmonics Inc
1 shared publication - Aravinda Kar
CREOL, The College of Optics and Photonics, University of Central Florida 3 , Orlando, Florida 32816
1 shared publication
Latest Publications
- Open Access
- 1 June 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (6) , 063003
Wet Etching Studies on CuGaO 2 and CuCrO 2 Thin Films
Wet etching of delafossite CuGaO 2 and CuCrO 2 thin films was investigated for the first time. CuGaO 2 films were exposed to concentrated HCl, nitric acid, and aluminum etchant at varying temperatures, with etch rates dependent on temperature. Concentrated HCl produced the highest etch rates. CuCrO 2 films were etched using an HCl–HNO 3 mixture at 40 °C–60 °C and chromium-based etchants at dilutions of 1:5 to 1:10. The fastest etching was observed in the 1:5 dilution, and slower rates were achieved through higher dilutions or lower temperatures. Optical microscopy confirmed well-defined patterns, achieving feature sizes as small as 19 μm. Preliminary Arrhenius analysis indicated thermally activated etching behavior, highlighting the strong influence of etchant chemistry on the etching mechanism.
- 1 June 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (6) , 063003
Open AccessWet Etching Studies on CuGaO 2 and CuCrO 2 Thin Films
Wet etching of delafossite CuGaO 2 and CuCrO 2 thin films was investigated for the first time. CuGaO 2 films were exposed to concentrated HCl, nitric acid, and aluminum etchant at varying temperatures, with etch rates dependent on temperature. Concentrated HCl produced the highest etch rates. CuCrO 2 films were etched using an HCl–HNO 3 mixture at 40 °C–60 °C and chromium-based etchants at dilutions of 1:5 to 1:10. The fastest etching was observed in the 1:5 dilution, and slower rates were achieved through higher dilutions or lower temperatures. Optical microscopy confirmed well-defined patterns, achieving feature sizes as small as 19 μm. Preliminary Arrhenius analysis indicated thermally activated etching behavior, highlighting the strong influence of etchant chemistry on the etching mechanism.
- Open Access
- 26 March 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (2)
Numerical investigation of laser doping parameters for semi-insulating 4H-SiC substrate
Semi-insulating (SI) 4H-polytype of silicon carbide (SiC) is a highly desirable wide bandgap semiconductor material for various applications in challenging environments owing to its exceptional characteristics such as high melting point, remarkable thermal conductivity, strong breakdown field, and excellent resistance to oxidation. This study investigates the critical laser processing parameters to operate a pulsed UV 355 nm laser to dope high-purity (HP) SI 4H-SiC substrates with boron. The doping process parameters are examined and simulated for this UV laser doping system using a liquid precursor of boron. Boron atoms create a dopant energy level of 0.3eV in the doped HP 4H-SiC substrates. Diffusion of boron atoms into 4H-SiC substrates modifies the hole density at 0.3eV energy level, and causing a variation in the dynamic refraction index, and absorption index. Consequently, the optical properties of boron doped samples, namely, transmittance, reflectance, and absorbance, can be modified. The current simulation reported in this study explains the motivation of UV optical doping strategy to dope SiC substrates. A beam homogenizer was used to control the laser spot used to generate doping process. The advantage of the beam homogenizer is demonstrated by producing flat-top beams with uniform intensity over a certain area defined by the focusing lens choice. A simple theoretical model is used to select the laser processing parameters for doping SiC substrates. These modeled parameters are used to determine the efficient laser processing parameters for our doping experiments.
- 26 March 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (2)
Open AccessNumerical investigation of laser doping parameters for semi-insulating 4H-SiC substrate
Semi-insulating (SI) 4H-polytype of silicon carbide (SiC) is a highly desirable wide bandgap semiconductor material for various applications in challenging environments owing to its exceptional characteristics such as high melting point, remarkable thermal conductivity, strong breakdown field, and excellent resistance to oxidation. This study investigates the critical laser processing parameters to operate a pulsed UV 355 nm laser to dope high-purity (HP) SI 4H-SiC substrates with boron. The doping process parameters are examined and simulated for this UV laser doping system using a liquid precursor of boron. Boron atoms create a dopant energy level of 0.3eV in the doped HP 4H-SiC substrates. Diffusion of boron atoms into 4H-SiC substrates modifies the hole density at 0.3eV energy level, and causing a variation in the dynamic refraction index, and absorption index. Consequently, the optical properties of boron doped samples, namely, transmittance, reflectance, and absorbance, can be modified. The current simulation reported in this study explains the motivation of UV optical doping strategy to dope SiC substrates. A beam homogenizer was used to control the laser spot used to generate doping process. The advantage of the beam homogenizer is demonstrated by producing flat-top beams with uniform intensity over a certain area defined by the focusing lens choice. A simple theoretical model is used to select the laser processing parameters for doping SiC substrates. These modeled parameters are used to determine the efficient laser processing parameters for our doping experiments.
- Open Access
- 24 February 2023
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 12 (3) , 033010
Work Function Estimation of Gallium-Doped Zinc Oxide Using Transparent Gate Electrode MOSFET
In this research, the work function (WF) of RF sputtered GZO thin films has been estimated using the electrical characteristics n-Metal Oxide Semiconductor Field Effect Transistor (n-MOSFET) device. Two identical sets of MOSFETs were fabricated in this work using a four-level mask. These MOSFETs have two different types of gate contact materials (Al and GZO respectively). GZO was deposited by using RF magnetron sputtering technique while Al was deposited using the thermal evaporation technique. By comparison of the work function of the two MOSFETs, the work function of RF sputtered GZO thin films was identified to be around 4.58 eV.
- 24 February 2023
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 12 (3) , 033010
Open AccessWork Function Estimation of Gallium-Doped Zinc Oxide Using Transparent Gate Electrode MOSFET
In this research, the work function (WF) of RF sputtered GZO thin films has been estimated using the electrical characteristics n-Metal Oxide Semiconductor Field Effect Transistor (n-MOSFET) device. Two identical sets of MOSFETs were fabricated in this work using a four-level mask. These MOSFETs have two different types of gate contact materials (Al and GZO respectively). GZO was deposited by using RF magnetron sputtering technique while Al was deposited using the thermal evaporation technique. By comparison of the work function of the two MOSFETs, the work function of RF sputtered GZO thin films was identified to be around 4.58 eV.
- Open Access
- 1 August 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (8) , 085003
Investigation on the Intermixing of Cu and In Layers for the Formation of Cu2In2O5 Thin Films
For the first time, this research focuses on the inexpensive technique of synthesis of Cu2In2O5 thin films using intermixing of Cu and In layers, deposited using radio frequency (RF) magnetron sputtering technique. Further, structural, morphological, and optical characterization of Cu2In2O5 thin films have been carried out. The layered films were sputtered using Cu and In targets. The layered structure was subjected to post-deposition annealing at temperatures varying from 700 °C to 1000 °C in a constant oxygen ambiance for five hours. Decomposition of the single-phase Cu2In2O5 takes place at 1000 °C, resulting in the appearance of CuO, In2O3, and Cu2O as decomposition products. Descriptive analysis of the formation of the aforementioned products have been included. However, single-phase Cu2In2O5 thin films were obtained at a post-annealing temperature of 900 °C. The oxidation states of In and Cu have been studied through XPS analysis. Full width half maximum (FWHM), peak positions, satellite peak positions, and their respective binding energies have been elucidated through XPS analysis. An increase in the grain size from 36.8 nm to 115.8 nm with an increase in the annealing temperature from 700 °C to 1000 °C, was noticed from the FESEM images. Optical studies were performed on all the annealed films in the 200–2000 nm wavelength range. The bandgap was in the range of 2.88 to 3.46 eV for the films annealed between 700 °C to 900 °C. The refractive index of the single-phase Cu2In2O5 thin film was obtained to be 1.51.
- 1 August 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (8) , 085003
Open AccessInvestigation on the Intermixing of Cu and In Layers for the Formation of Cu2In2O5 Thin Films
For the first time, this research focuses on the inexpensive technique of synthesis of Cu2In2O5 thin films using intermixing of Cu and In layers, deposited using radio frequency (RF) magnetron sputtering technique. Further, structural, morphological, and optical characterization of Cu2In2O5 thin films have been carried out. The layered films were sputtered using Cu and In targets. The layered structure was subjected to post-deposition annealing at temperatures varying from 700 °C to 1000 °C in a constant oxygen ambiance for five hours. Decomposition of the single-phase Cu2In2O5 takes place at 1000 °C, resulting in the appearance of CuO, In2O3, and Cu2O as decomposition products. Descriptive analysis of the formation of the aforementioned products have been included. However, single-phase Cu2In2O5 thin films were obtained at a post-annealing temperature of 900 °C. The oxidation states of In and Cu have been studied through XPS analysis. Full width half maximum (FWHM), peak positions, satellite peak positions, and their respective binding energies have been elucidated through XPS analysis. An increase in the grain size from 36.8 nm to 115.8 nm with an increase in the annealing temperature from 700 °C to 1000 °C, was noticed from the FESEM images. Optical studies were performed on all the annealed films in the 200–2000 nm wavelength range. The bandgap was in the range of 2.88 to 3.46 eV for the films annealed between 700 °C to 900 °C. The refractive index of the single-phase Cu2In2O5 thin film was obtained to be 1.51.
- Open Access
- 1 June 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (6) , 063015
Review—The Synthesis and Characterization of Recent Two-Dimensional Materials for Energy Storage Applications
The ever-increasing energy consumption has been projected to burden renewable energy sources. It is imperative to look for high-performance clean energy storage systems to sustain future energy demands. Among all the environmentally friendly and efficient energy storage options, supercapacitors are one of the most researched devices. Supercapacitors possess excellent electrochemical properties such as high-power density, superior cyclic stability, fast charging-discharging rates, and high specific capacitance that makes them a fascinating candidate. To improve the energy storage capacity, the two-dimensional counterpart of the supercapacitors is being investigated extensively and manifested unique electrochemical properties. This article thoroughly summarizes the synthesis and characterization techniques adopted for the most recent two-dimensional supercapacitor electrode materials. We focus on the family of carbon-based materials, transition metal oxides and hydroxides, MXenes, and transition metal dichalcogenides that can be employed for clean energy storage applications. The performance of these materials is discussed and compared based on their synthesis technique.
- 1 June 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (6) , 063015
Open AccessReview—The Synthesis and Characterization of Recent Two-Dimensional Materials for Energy Storage Applications
The ever-increasing energy consumption has been projected to burden renewable energy sources. It is imperative to look for high-performance clean energy storage systems to sustain future energy demands. Among all the environmentally friendly and efficient energy storage options, supercapacitors are one of the most researched devices. Supercapacitors possess excellent electrochemical properties such as high-power density, superior cyclic stability, fast charging-discharging rates, and high specific capacitance that makes them a fascinating candidate. To improve the energy storage capacity, the two-dimensional counterpart of the supercapacitors is being investigated extensively and manifested unique electrochemical properties. This article thoroughly summarizes the synthesis and characterization techniques adopted for the most recent two-dimensional supercapacitor electrode materials. We focus on the family of carbon-based materials, transition metal oxides and hydroxides, MXenes, and transition metal dichalcogenides that can be employed for clean energy storage applications. The performance of these materials is discussed and compared based on their synthesis technique.
- Open Access
- 1 February 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (2) , 023005
Preparation and Characterization of Radio Frequency Sputtered Delafossite p-type Copper Gallium Oxide (p-CuGaO2) Thin Films
In this research, CuGaO2 thin films were prepared on quartz substrates by radio frequency magnetron sputtering technique at 400 °C followed by subsequent annealing in N2 ambiance. The effects of annealing temperature on structural, morphological, optical, and electrical properties of CuGaO2 thin films are reported in this work. X-ray Diffraction (XRD) analysis confirmed the presence of single-phase CuGaO2 in the film annealed at 900 °C. Near stoichiometric composition ratio of Cu:Ga (1:1.08) was identified in the film annealed at 900 °C. The Field Emission Scanning Electron Microscope (FESEM) images showed an increase in the grain size with an increase in annealing temperature. A UV–V is spectrophotometer was used to perform optical studies in the 200–800 nm wavelength region on all films. The optical bandgap was calculated from the transmission studies and was found to be in the range of 2.77 to 3.43 eV. The films annealed at temperatures 800 °C and above were found to be p-type. The lowest resistivity value of 230 Ω-cm was achieved in the film annealed at 900 °C.
- 1 February 2022
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (2) , 023005
Open AccessPreparation and Characterization of Radio Frequency Sputtered Delafossite p-type Copper Gallium Oxide (p-CuGaO2) Thin Films
In this research, CuGaO2 thin films were prepared on quartz substrates by radio frequency magnetron sputtering technique at 400 °C followed by subsequent annealing in N2 ambiance. The effects of annealing temperature on structural, morphological, optical, and electrical properties of CuGaO2 thin films are reported in this work. X-ray Diffraction (XRD) analysis confirmed the presence of single-phase CuGaO2 in the film annealed at 900 °C. Near stoichiometric composition ratio of Cu:Ga (1:1.08) was identified in the film annealed at 900 °C. The Field Emission Scanning Electron Microscope (FESEM) images showed an increase in the grain size with an increase in annealing temperature. A UV–V is spectrophotometer was used to perform optical studies in the 200–800 nm wavelength region on all films. The optical bandgap was calculated from the transmission studies and was found to be in the range of 2.77 to 3.43 eV. The films annealed at temperatures 800 °C and above were found to be p-type. The lowest resistivity value of 230 Ω-cm was achieved in the film annealed at 900 °C.
- Open Access
- 1 June 2021
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 10 (6) , 065016
Electrical and Optical Studies of Reactively Sputtered Indium Oxide Thin Films
Electrical and optical properties of transparent conducting Indium Oxide (In2O3) thin films were studied. These films were deposited by reactive RF sputtering process using Indium target in the presence of oxygen as reactive gas with argon. The pressure and the oxygen gas flow ratios during sputtering were varied to investigate their effect on the resistivity, optical transmission, refractive index, and optical bandgap of In2O3 thin films. The lowest reported resistivity in this study is 2 × 10−3 Ω-cm. The optical transmission was more than 80% in the wavelength range of 400 nm to 800 nm. The optical study revealed the wide optical bandgap of 3.712 eV and 3.875 eV of the deposited In2O3 films. The films showed refractive indices in the range of 1.99 to 2.22. The elemental composition of In2O3 films has been studied through X-ray Photoelectron Spectroscopy (XPS).
- 1 June 2021
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 10 (6) , 065016
Open AccessElectrical and Optical Studies of Reactively Sputtered Indium Oxide Thin Films
Electrical and optical properties of transparent conducting Indium Oxide (In2O3) thin films were studied. These films were deposited by reactive RF sputtering process using Indium target in the presence of oxygen as reactive gas with argon. The pressure and the oxygen gas flow ratios during sputtering were varied to investigate their effect on the resistivity, optical transmission, refractive index, and optical bandgap of In2O3 thin films. The lowest reported resistivity in this study is 2 × 10−3 Ω-cm. The optical transmission was more than 80% in the wavelength range of 400 nm to 800 nm. The optical study revealed the wide optical bandgap of 3.712 eV and 3.875 eV of the deposited In2O3 films. The films showed refractive indices in the range of 1.99 to 2.22. The elemental composition of In2O3 films has been studied through X-ray Photoelectron Spectroscopy (XPS).
- 20 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 19 (1) , 90-96
Modeling and Simulation of Comprehensive Diode Behavior Under Electrostatic Discharge Stresses
Diodes are effective devices for Electrostatic Discharge (ESD) protection. To accurately predict ESD robustness through circuit simulation of protection architectures in integrated circuits that use diodes, an enhanced model is proposed. This model is constructed with several compact model elements to simulate all physical device behaviors under high current transient ESD conditions, namely voltage overshoot, on-resistance variation, and thermal failure. The proposed model implements a thermal monitor, which can not only correlate current – voltage characteristics with the self-heating effect, but accurately predicts thermal failure under different pulse width conditions. The simulation results of this comprehensive diode model benchmarked against measurements are also reported.
- 20 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 19 (1) , 90-96
Modeling and Simulation of Comprehensive Diode Behavior Under Electrostatic Discharge Stresses
Diodes are effective devices for Electrostatic Discharge (ESD) protection. To accurately predict ESD robustness through circuit simulation of protection architectures in integrated circuits that use diodes, an enhanced model is proposed. This model is constructed with several compact model elements to simulate all physical device behaviors under high current transient ESD conditions, namely voltage overshoot, on-resistance variation, and thermal failure. The proposed model implements a thermal monitor, which can not only correlate current – voltage characteristics with the self-heating effect, but accurately predicts thermal failure under different pulse width conditions. The simulation results of this comprehensive diode model benchmarked against measurements are also reported.
- 1 March 2012
- Published by Elsevier in Applied Surface Science
- Vol. 258 (10) , 4607-4613
Mathematical characterization of oxidized crystalline silicon nanowires grown by electroless process
- 1 March 2012
- Published by Elsevier in Applied Surface Science
- Vol. 258 (10) , 4607-4613
Mathematical characterization of oxidized crystalline silicon nanowires grown by electroless process
- 1 January 2006
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 153 (7) , G640-A1418
X-Ray Photoelectron Spectroscopy Analysis of Oxygen Annealed Radio Frequency Sputter Deposited SiCN Thin Films
A series of carbon-containing cathode materials LiMnyFe1−yPO4LiMnyFe1−yPO4 (0<y⩽1)(0LixMnyFe1−yPO4LixMnyFe1−yPO4 (0⩽x⩽1,0<y⩽1)(0⩽x⩽1,0<y⩽1) samples has been investigated by X-ray absorption spectroscopy. The results showed that the local structural change of manganese is completely reversible during the charge-discharge processes. According to the analysis of K-edge X-ray absorption fine structure, no significant difference is observed in the local structure of manganese in the charged state over the entire manganese content range. © 2002 The Electrochemical Society. All rights reserved.
- 1 January 2006
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 153 (7) , G640-A1418
X-Ray Photoelectron Spectroscopy Analysis of Oxygen Annealed Radio Frequency Sputter Deposited SiCN Thin Films
A series of carbon-containing cathode materials LiMnyFe1−yPO4LiMnyFe1−yPO4 (0<y⩽1)(0LixMnyFe1−yPO4LixMnyFe1−yPO4 (0⩽x⩽1,0<y⩽1)(0⩽x⩽1,0<y⩽1) samples has been investigated by X-ray absorption spectroscopy. The results showed that the local structural change of manganese is completely reversible during the charge-discharge processes. According to the analysis of K-edge X-ray absorption fine structure, no significant difference is observed in the local structure of manganese in the charged state over the entire manganese content range. © 2002 The Electrochemical Society. All rights reserved.