VSVivek Swami

Vivek Swami

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vivek Swami has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • An integrated approach to the Haynesville: The links between geology, seismic, and production

    by Mark Letizia, Irina Yakovleva, Graham Spence, Ross Taylor, Kevin Chesser, Paola Fonseca, Ceri Davies, Mohammad Nassir, Vivek Swami, Dale Walters

    In an industry where multiple disciplines are collecting a variety of geological and geophysical data sets with the primary aim of reducing exploration and production risk, it can be an overwhelming and challenging task to integrate and develop a succinct geological model. This study demonstrates the ability to incorporate cuttings, core, wireline logs, seismic, engineering, and production data to improve subsurface knowledge and ultimately provide information to allow for key managerial decisions. Presentation Date: Wednesday, September 18, 2019 Session Start Time: 8:30 AM Presentation Start Time: 9:20 AM Location: 217A Presentation Type: Oral

  • Seismic-driven pore and fracture pressure prediction in the Permian Basin

    by Ahmed Mohamed, Kit Clemons, Vishnu Pandey, Bertrand Six, Kevin Chesser, Vivek Swami

    Unconventional reservoirs cannot be characterized by relying on the juxtaposition of single-attribute analysis. To understand their complexity, many correlated static and dynamic reservoir properties need to be carefully and quantitatively analyzed as part of integrated multidisciplinary studies. The goal of quantitative interpretation is to predict reservoir properties away from control points in order to improve vertical and lateral well placement to maximize stimulated reservoir volume (SRV) and productivity. The dense lateral spacing of three-dimensional (3D) seismic lends itself to estimating reservoir properties in 3D. Therefore, prediction of elastic attributes from seismic amplitude away from wells is common practice. However, transforming these elastic properties into geomechanical and other reservoir properties requires integration of multiple data sets (e.g., wireline logs, core, and cuttings) at various scales. Integration of all of this information is essential for de-risking seismic amplitude-supported interpretations. This study demonstrates this approach and the methods used to help predict geomechanical properties in 3D space, away from well control. The computed geomechanical volumes (pore pressure (Pp), fracture pressure (Fp), and minimum horizontal stress (SHmin)) were used to pick intermediate casing points (IPCs) and to predict recommended maximum and minimum mud weights, both of which provided significant capital savings in casing design and/or lost bottom hole assemblies (BHAs). Presentation Date: Tuesday, September 17, 2019 Session Start Time: 1:50 PM Presentation Start Time: 3:30 PM Location: 303B Presentation Type: Oral

  • From geology to production: a completion optimization case study from Cleveland Sand, Oklahoma

    by Vivek Swami, Graham Spence, Theophile Gentilhomme, Bob Bachman, Mark Letizia, Casey Lipp


  • A Novel Approach to History Matching and Optimization of Shale Completions and EUR - A Case Study of Eagle Ford Well

    by Vivek Swami, Antonin Settari, Raki Sahai, Dan Costello, Ashley Mercer

    Many operators have used in the past various methods to analyze and optimize the horizontal well (HW) completions in the Eagle Ford play with varied results. Typically, such methods focus on different parts of this complex problem in relative isolation and as a consequence do not utilize all available data simultaneously. This paper presents a simulation-based method for analyzing the problem in an integrated fashion by modeling the fracturing and Stimulated Reservoir Volume (SRV) creation process, followed by well cleanup and production. Consequently, all available data are used to constrain the history match (HM), resulting in a more reliable tool for optimization. In this work, the authors developed a comprehensive integrated model of a typical Eagle Ford well in the Dimmit County. The HM process showed that injection and production scenarios must be modeled in tandem to get better insights into the flow physics rather than simulating them separately. The best accuracy is obtained when the real sequence of fracturing is modeled. It was found that only a fraction of the created fracture and SRV lengths contribute to production. Whereas fracture half-lengths of ~250 ft were generated during injection, only about ¼ of fracture and ¾ of SRV contributed. Effect of completion efficiency was also investigated. It was shown that the assumption of only 2 perforation clusters per stage is not plausible while assuming some other scenarios offers good HM and prediction very similar to uniform efficiency. Optimization work considered several scenarios. Cases with larger cluster/stage spacing with the same pumped volume are not desirable. However, the use of double the cluster spacing gives slightly higher estimated ultimate recovery in 30 years, and could offer significant completion cost savings. Use of current injection volumes and current well spacing (500 ft) leaves significant reservoir volume undrained, which is a target for well spacing optimization. Pressure (as opposed to stress) dependent permeability functions adequately capture the permeability variation both for injection and production. The work shows how the integrated reservoir/fracturing/geomechanics modeling can be used to optimize completions and EUR for shale wells.


  • A Numerical Model for Multi-Mechanism Flow in Shale Gas Reservoirs with Application to Laboratory Scale Testing

    by Vivek Swami, A. (Tony) Settari, Farzam Javadpour

    Shale is a complex unconventional reservoir having a variety of storage and flow mechanisms coupled together. Contrary to conventional reservoirs where gas is stored only in the pore space as free gas; current numerical simulators assume gas is stored as free and adsorbed phase in shale. Recent advancement of visualization and measurement techniques has enabled us to look at shale more closely. Shale has been found to contain a well-developed nanopore network in the organic matter or kerogen. Correspondingly we believe that gas is stored via four storage mechanisms: gas in natural fractures, free gas in matrix pores, adsorbed gas and gas dissolved in kerogen bulk in the shales. In this work we formulate a flow model for shale gas reservoirs including the physics at nano scale. The model incorporates the gas stored in micro-fractures, gas stored in nanopores, gas adsorbed on the pore walls and gas dissolved in kerogen bulk. This complex quad porosity system has coupled equations between three interconnected systems; between matrix and fracture set, between matrix and adsorbed gas and between matrix and kerogen bulk. Sets of governing equations were derived for the coupled systems and numerically solved to find gas production as a function of time. The model was validated against laboratory observed data for a shale canister test from a Canadian shale gas field. This laboratory scale model can be suitably up-scaled for field scale simulation of shale reservoirs. Introduction Shale reservoirs are quite different from conventional reservoirs with respect to deposition history, storage mechanisms and transport behavior (caused by contrast in rock pore size). First—whereas in a conventional reservoir the hydrocarbons migrate from source rock to reservoir rock, shale is both the source and reservoir rock in itself. The organic matter gets deposited and converted into gas but does not escape. This is a result of the extremely low permeability of shale pores and the absence of large pressure gradients. Second—in conventional reservoirs, hydrocarbon is stored only in the pore spaces but there are multiple storage mechanisms active in shale owing to its complex composition. Current belief is that the gas associated with shale gas reservoirs is stored as free gas (natural fractures and nanopores) and adsorbed only (Boyer et al., 2006). Shale is a complex mixture of organic matter (kerogen), inorganic matter (clay, silica) and interbedded minerals (feldspar etc.). The organic matter is found to contain a well-developed network of nanopores. As can be seen in Fig. 1 (SEM image from a Barnett shale sample) almost all the nanopores are only located inside the kerogen. It can be deduced that almost entire porous space occurs inside kerogen only. Hashmy et al. (2011) claim that the porosity inside the kerogen can reach up to 40%. Kerogen can be further subdivided into two parts; porous space (nanopores) and kerogen bulk (solid). Traditionally kerogen bulk has not been considered a very significant gas holder. Assuming kerogen bulk's equivalence with bitumen, it would have appreciable gas solubility. Kerogen fraction could reach up to 40% v/v compared to total shale bulk volume in certain organic rich shales (Passey et al., 2011). Therefore kerogen can store a significant amount of gas in the dissolved phase. Also, the rate of diffusion from kerogen bulk to shale pores has historically been considered negligible (Hashmy et al., 2011). In our previous work (Swami & Settari, 2012) we showed that it is very significant theoretically and in fact can affect the pressure transients and cumulative recovery behavior. The total gas in place should consist of free gas stored in the natural fractures (if present), the nanopores, adsorbed gas on the organic matter surface and gas dissolved inside the kerogen bulk.


  • Non-Darcy Flow in Shale Nanopores: Do We Have a Final Answer?

    by Vivek Swami, Christopher R. Clarkson, A. (Tony) Settari

    Many shale gas and ultra-low permeability tight gas reservoirs can have matrix permeability values in the range of tens to hundreds of nanodarcies. The ultra-fine pore structure of these rocks can cause violation of the basic assumptions behind usage of Darcy’s law. Depending on a combination of P-T conditions, pore structure and gas properties, non-Darcy flow mechanisms such as Knudsen diffusion and/or gas slippage effects could be important. Quantifying these effects is critical for correcting laboratory permeability measurements to obtain true (intrinsic) matrix permeability; several authors have also noted that corrections for these effects may also be important when analyzing field data. In order to make corrections for non-Darcy flow, numerous authors have quantified these effects as an apparent permeability that changes as a function of Knudsen number or gas pressure. There are now many correlations available for quantifying apparent permeability changes, but it is not known how much impact they really have on the long term production performance of shale gas wells. In this work, we summarize the various methods for quantifying non-Darcy flow in unconventional gas reservoirs, and compare the apparent permeability and slippage factor predictions for all the models we have compiled. For determining the impact of the model predictions on well performance, we incorporate the apparent permeability predictions of each model into a numerical simulator, and compare rate-time and cumulative gas-time forecasts for each scenario. The importance of dual porosity (which is usually assumed necessary for shale gas) is also examined. The results of this work are important in several aspects. First, the differences between various formulations of the apparent matrix permeability in shales are illustrated. Secondly, the impact of non-Darcy effects on history matching and recovery forecasting is demonstrated. Finally, it is shown that there may not be a need for dual porosity modeling in certain cases. The results of this study will be important to professionals involved in laboratory measurement of matrix permeability in unconventional gas reservoirs, modeling well performance, and forecasting shale gas recovery.


  • Shale Gas Reservoir Modeling: From Nanopores to Laboratory

    by Vivek Swami

    It has been observed over the years that shale gas production modeled with conventional simulators/models is much lower than the actually observed field data. Generally reservoir and/or stimulated reservoir volume (SRV) parameters are modified (without much physical support) to match the production data. Instead of modifying the reservoir parameters without physical support, we aim to investigate the shale closely and see if we are missing some vital part in the flow physics. Shale is a complex unconventional reservoir with a significant organic fraction. Traditionally, it is perceived that the gas is stored in pore space and adsorbed on pore surfaces. In this work, we postulate that significant amount of gas is also stored in the bulk of organic matter or kerogen. We show a conceptual model of one shale pore and model the flow behavior taking into account the free gas (stored in natural fractures and nanopores), adsorbed gas, and gas dissolved in kerogen. Therafter, we upscale the model to a laboratory scale sample. We propose a numerical model for the complex "quad" porosity system while also accounting for non Darcy flow in shale nanopores. We then calibrate the model against a laboratory experimental data. This laboratory scale model can be upscaled suitably for field scale simulation of shale reservoirs.


  • A Pore Scale Gas Flow Model for Shale Gas Reservoir

    by Vivek Swami, A. (Tony) Settari

    It has been observed that the shale gas production modeled with conventional simulators/models is much lower than actually observed field data. Generally reservoir and/or stimulated reservoir volume (SRV) parameters are modified (without much physical support) to match production data. One of the important parameters controlling flow is the effective permeability of the intact shale. In this project we aim to model flow in shale nano pores by capturing the physics behind the actual process. For the flow dynamics, in addition to Darcy flow, the effects of slippage at the boundary of pores and Knudsen diffusion have been included. For the gas source, the compressed gas stored in pore spaces, gas adsorbed at pore walls and gas diffusing from the kerogen have been considered. To imitate the actual scenario, real gas has been considered to model the flow. Partial differential equations were derived capturing the physics and finite difference method was used to solve the coupled differential equations numerically. The contribution of Knudsen diffusion and gas slippage, gas desorption and gas diffusion from kerogen to total production was studied in detail. It was seen that including the additional physics causes significant differences in pressure gradients and increases cumulative production. We conclude that the above effects should be considered while modeling and making production forecasts for shale gas reservoirs.