Yuxin Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yuxin Song has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Zuankai Wang
The Hong Kong Polytechnic University
8 shared publications - Wanghuai Xu
Department of Mechanical Engineering The Hong Kong Polytechnic University Hong Kong China
6 shared publications Huanxi Zheng
Department of Mechanical Engineering, City University of Hong Kong, Hong Kong 999077, China
3 shared publications- Baoping Zhang
Department of Mechanical Engineering, The Polytechnic University of Hong Kong 1 , Hong Kong 999077
2 shared publications - Chao Zhang
MOE Key Laboratory of Macromolecular Synthesis and Functionalization, and Key Lab of Adsorption and Separation Materials and Technologies of Zhejiang Province Department of Polymer Science and Engineering Zhejiang University Hangzhou 310058 China
2 shared publications - Cong Wang
State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
2 shared publications
Latest Publications
- 2 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (28) , 18246-18257
Laser-fabricated sandwiched fog collector enabling agricultural irrigation and electricity generation
Atmospheric fog is an abundant yet underutilized freshwater resource for remote and arid regions, but existing fog harvesters face a fundamental trade-off: impermeable collectors suffer from aerodynamic bypass, whereas porous meshes are prone to pore flooding, clogging, and droplet re-entrainment due to inefficient liquid removal. Here, we report a laser-fabricated sandwiched fog collector that introduces an extreme wettability contrast by stacking superhydrophobic (SHB) and superhydrophilic (SHL) meshes in an SHB–SHL–SHB configuration to enable preferential out-of-plane liquid transport from fog interception sites to drainage pathways. This architecture preserves the high capture capability of porous meshes while continuously renewing open pores, thereby suppressing clogging and re-entrainment under continuous fog-laden airflow. As a result, the collector achieves a high water-collection rate of 1200 mg cm−2 h−1 with direction-insensitive performance. A large-scale fog collector of 36 cm × 56 cm was fabricated to exhibit scalability and enhanced collection. Beyond water collection, the collected droplets by fog collectors enable accelerated crop cultivation and drive a droplet-based electricity generator delivering electrical outputs of 171 V and 1.75 mJ m−2. This scalable, low-cost strategy provides a practical route toward simultaneous crop irrigation and electricity generation for remote, off-grid areas.
- 2 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (28) , 18246-18257
Laser-fabricated sandwiched fog collector enabling agricultural irrigation and electricity generation
Atmospheric fog is an abundant yet underutilized freshwater resource for remote and arid regions, but existing fog harvesters face a fundamental trade-off: impermeable collectors suffer from aerodynamic bypass, whereas porous meshes are prone to pore flooding, clogging, and droplet re-entrainment due to inefficient liquid removal. Here, we report a laser-fabricated sandwiched fog collector that introduces an extreme wettability contrast by stacking superhydrophobic (SHB) and superhydrophilic (SHL) meshes in an SHB–SHL–SHB configuration to enable preferential out-of-plane liquid transport from fog interception sites to drainage pathways. This architecture preserves the high capture capability of porous meshes while continuously renewing open pores, thereby suppressing clogging and re-entrainment under continuous fog-laden airflow. As a result, the collector achieves a high water-collection rate of 1200 mg cm−2 h−1 with direction-insensitive performance. A large-scale fog collector of 36 cm × 56 cm was fabricated to exhibit scalability and enhanced collection. Beyond water collection, the collected droplets by fog collectors enable accelerated crop cultivation and drive a droplet-based electricity generator delivering electrical outputs of 171 V and 1.75 mJ m−2. This scalable, low-cost strategy provides a practical route toward simultaneous crop irrigation and electricity generation for remote, off-grid areas.
- 21 January 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (33)
Laser‐Induced‐Graphene‐Enabled Droplet‐Based Electricity Generator for Simultaneous Harvesting of Fog and Water Kinetic Energy
Addressing the global water‐energy nexus requires robust cogeneration technologies. Integrating fog harvesters with droplet‐based electricity generators (DEGs) hold promises for harvesting distributed water and energy. However, conventional DEGs are susceptible to failure under mechanical stress and in corrosive aqueous environments because of electrode delamination and degradation. Herein, we report a laser‐induced‐graphene‐enabled droplet‐based electricity generator (LIG‐DEG) that simultaneously harvests fog droplets and water kinetic energy, while exhibiting exceptional robustness that preserves device integrity and electrical performance. By fabricating laser‐induced graphene (LIG) electrodes in situ on polyimide substrates via laser processing, we achieve seamless electrode‐substrate integration, overcoming the delamination and degradation that limit conventional DEGs. The LIG‐DEG demonstrates outstanding mechanical and chemical robustness, maintaining an output voltage above 100 V after 21 000 buckling cycles, 210 abrasion cycles, and immersion in HCl, NaOH, or ethanol. Moreover, synergistically integrated with a bioinspired fog harvester, our design achieves cogeneration with a water collection rate of 250 g·h − 1 and sustained output voltage of 105 V in foggy environments. This scalable approach provides a durable solution for water‐energy harvesting in coastal or industrial high‐humidity regions.
- 21 January 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (33)
Laser‐Induced‐Graphene‐Enabled Droplet‐Based Electricity Generator for Simultaneous Harvesting of Fog and Water Kinetic Energy
Addressing the global water‐energy nexus requires robust cogeneration technologies. Integrating fog harvesters with droplet‐based electricity generators (DEGs) hold promises for harvesting distributed water and energy. However, conventional DEGs are susceptible to failure under mechanical stress and in corrosive aqueous environments because of electrode delamination and degradation. Herein, we report a laser‐induced‐graphene‐enabled droplet‐based electricity generator (LIG‐DEG) that simultaneously harvests fog droplets and water kinetic energy, while exhibiting exceptional robustness that preserves device integrity and electrical performance. By fabricating laser‐induced graphene (LIG) electrodes in situ on polyimide substrates via laser processing, we achieve seamless electrode‐substrate integration, overcoming the delamination and degradation that limit conventional DEGs. The LIG‐DEG demonstrates outstanding mechanical and chemical robustness, maintaining an output voltage above 100 V after 21 000 buckling cycles, 210 abrasion cycles, and immersion in HCl, NaOH, or ethanol. Moreover, synergistically integrated with a bioinspired fog harvester, our design achieves cogeneration with a water collection rate of 250 g·h − 1 and sustained output voltage of 105 V in foggy environments. This scalable approach provides a durable solution for water‐energy harvesting in coastal or industrial high‐humidity regions.
- Top Cited Papers
- 20 January 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (2) , 162-179
Nanoemulsion modular assembly for the synthesis of functional mesoporous nanomaterials
- 20 January 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (2) , 162-179
Top Cited PapersNanoemulsion modular assembly for the synthesis of functional mesoporous nanomaterials
- 21 August 2025
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 25 (20) , 5232-5239
A hybrid flowing water-based energy generator inspired by a rotatable waterwheel
A hybrid rotatable flowing water-based energy generator fully utilizes the spatial decoupling of the gravitational force of flowing water in two orthogonal directions and renders efficient water energy harvesting across a wide range of flow rates.
- 21 August 2025
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 25 (20) , 5232-5239
A hybrid flowing water-based energy generator inspired by a rotatable waterwheel
A hybrid rotatable flowing water-based energy generator fully utilizes the spatial decoupling of the gravitational force of flowing water in two orthogonal directions and renders efficient water energy harvesting across a wide range of flow rates.
- Open Access
- 7 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Ultrastrong, flexible thermogalvanic armor with a Carnot-relative efficiency over 8%
Body heat, a clean and ubiquitous energy source, is promising as a renewable resource to supply wearable electronics. Emerging tough thermogalvanic device could be a sustainable platform to convert body heat energy into electricity for powering wearable electronics if its Carnot-relative efficiency (ηr) reaches ~5%. However, maximizing both the ηr and mechanical strength of the device are mutually exclusive. Here, we develop a rational strategy to construct a flexible thermogalvanic armor (FTGA) with a ηr over 8% near room temperature, yet preserving mechanical robustness. The key to our design lies in simultaneously realizing the thermosensitive-crystallization and salting-out effect in the elaborately designed ion-transport highway to boost ηr and improve mechanical strength. The FTGA achieves an ultrahigh ηr of 8.53%, coupling with impressive mechanical toughness of 70.65 MJ m−3 and substantial elongation (~900%) together. Our strategy holds sustainable potential for harvesting body heat and powering wearable electronics without recharging.
- 7 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Open AccessUltrastrong, flexible thermogalvanic armor with a Carnot-relative efficiency over 8%
Body heat, a clean and ubiquitous energy source, is promising as a renewable resource to supply wearable electronics. Emerging tough thermogalvanic device could be a sustainable platform to convert body heat energy into electricity for powering wearable electronics if its Carnot-relative efficiency (ηr) reaches ~5%. However, maximizing both the ηr and mechanical strength of the device are mutually exclusive. Here, we develop a rational strategy to construct a flexible thermogalvanic armor (FTGA) with a ηr over 8% near room temperature, yet preserving mechanical robustness. The key to our design lies in simultaneously realizing the thermosensitive-crystallization and salting-out effect in the elaborately designed ion-transport highway to boost ηr and improve mechanical strength. The FTGA achieves an ultrahigh ηr of 8.53%, coupling with impressive mechanical toughness of 70.65 MJ m−3 and substantial elongation (~900%) together. Our strategy holds sustainable potential for harvesting body heat and powering wearable electronics without recharging.
- 1 December 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (49) , 18143-18151
Laser-Textured Hybrid Brass Pattern Array Surface for High-Efficiency Fog Collection
Fog collection holds promise for addressing water shortage. However, the conventional fabrication of fog collection devices, normally chemical methods, suffers many challenges, such as complicated preparation and environmental issues. Herein, we proposed a green fabrication strategy to construct superhydrophobic/hydrophilic surfaces on the brass substrate via the combination of laser fabrication and heat treatment. The wettability of brass is directly dictated by the laser process parameters. The different superhydrophobic/hydrophilic hybrid pattern surface with a rectangular/triangular array was designed for an optimal fog collection performance. The maximum water collection efficiency of the prepared surface is measured up to 427.36 mg h-1 cm-2, which is 97% higher than that of the control sample. Furthermore, the surface can be folded into different forms to realize a flexible collector. We envision that our work provides a green fabrication strategy to construct a superwetting surface for highly efficient fog collection.
- 1 December 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (49) , 18143-18151
Laser-Textured Hybrid Brass Pattern Array Surface for High-Efficiency Fog Collection
Fog collection holds promise for addressing water shortage. However, the conventional fabrication of fog collection devices, normally chemical methods, suffers many challenges, such as complicated preparation and environmental issues. Herein, we proposed a green fabrication strategy to construct superhydrophobic/hydrophilic surfaces on the brass substrate via the combination of laser fabrication and heat treatment. The wettability of brass is directly dictated by the laser process parameters. The different superhydrophobic/hydrophilic hybrid pattern surface with a rectangular/triangular array was designed for an optimal fog collection performance. The maximum water collection efficiency of the prepared surface is measured up to 427.36 mg h-1 cm-2, which is 97% higher than that of the control sample. Furthermore, the surface can be folded into different forms to realize a flexible collector. We envision that our work provides a green fabrication strategy to construct a superwetting surface for highly efficient fog collection.
- Top Cited PapersOpen Access
- 23 December 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (51)
Triboelectric wetting for continuous droplet transport
Manipulating liquid is of great significance in fields from life sciences to industrial applications. Owing to its advantages in manipulating liquids with high precision and flexibility, electrowetting on dielectric (EWOD) has been widely used in various applications. Despite this, its efficient operation generally needs electrode arrays and sophisticated circuit control. Here, we develop a largely unexplored triboelectric wetting (TEW) phenomenon that can directly exploit the triboelectric charges to achieve the programmed and precise water droplet control. This key feature lies in the rational design of a chemical molecular layer that can generate and store triboelectric charges through agile triboelectrification. The TEW eliminates the requirement of the electric circuit design and additional source input and allows for manipulating liquids of various compositions, volumes, and arrays on various substrates in a controllable manner. This previously unexplored wetting mechanism and control strategy will find diverse applications ranging from controllable chemical reactions to surface defogging.
- 23 December 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (51)
Top Cited PapersOpen AccessTriboelectric wetting for continuous droplet transport
Manipulating liquid is of great significance in fields from life sciences to industrial applications. Owing to its advantages in manipulating liquids with high precision and flexibility, electrowetting on dielectric (EWOD) has been widely used in various applications. Despite this, its efficient operation generally needs electrode arrays and sophisticated circuit control. Here, we develop a largely unexplored triboelectric wetting (TEW) phenomenon that can directly exploit the triboelectric charges to achieve the programmed and precise water droplet control. This key feature lies in the rational design of a chemical molecular layer that can generate and store triboelectric charges through agile triboelectrification. The TEW eliminates the requirement of the electric circuit design and additional source input and allows for manipulating liquids of various compositions, volumes, and arrays on various substrates in a controllable manner. This previously unexplored wetting mechanism and control strategy will find diverse applications ranging from controllable chemical reactions to surface defogging.
- Top Cited PapersOpen Access
- 24 June 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (25) , eabo7698
Bubble energy generator
Bubbles have been extensively explored as energy carriers ranging from boiling heat transfer and targeted cancer diagnosis. Yet, despite notable progress, the kinetic energy inherent in small bubbles remains difficult to harvest. Here, we develop a transistor-inspired bubble energy generator for directly and efficiently harvesting energy from small bubbles. The key points lie in designing dielectric surface with high-density electric charges and tailored surface wettability as well as transistor-inspired electrode configuration. The synergy between these features facilitates fast bubble spreading and subsequent departure, transforms the initial liquid/solid interface into gas/solid interface under the gating of bubble, and yields an output at least one order of magnitude higher than existing studies. We also show that the output can be further enhanced through rapid bubble collapse at the air/liquid interface and multiple bubbles synchronization. We envision that our design will pave the way for small bubble-based energy harvesting in liquid media.
- 24 June 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (25) , eabo7698
Top Cited PapersOpen AccessBubble energy generator
Bubbles have been extensively explored as energy carriers ranging from boiling heat transfer and targeted cancer diagnosis. Yet, despite notable progress, the kinetic energy inherent in small bubbles remains difficult to harvest. Here, we develop a transistor-inspired bubble energy generator for directly and efficiently harvesting energy from small bubbles. The key points lie in designing dielectric surface with high-density electric charges and tailored surface wettability as well as transistor-inspired electrode configuration. The synergy between these features facilitates fast bubble spreading and subsequent departure, transforms the initial liquid/solid interface into gas/solid interface under the gating of bubble, and yields an output at least one order of magnitude higher than existing studies. We also show that the output can be further enhanced through rapid bubble collapse at the air/liquid interface and multiple bubbles synchronization. We envision that our design will pave the way for small bubble-based energy harvesting in liquid media.
- 18 August 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 8 (2)
Electrohydrodynamic and Hydroelectric Effects at the Water–Solid Interface: from Fundamentals to Applications
Electrohydrodynamic and hydroelectric effects at the water–solid interface are of fundamental importance and also underpin many important applications ranging from the controlled liquid transport by applying an external electric field to the power generation from moving liquid. Also, recent advances in micro/nanofabrication and nanomaterials provide additional dimension and flexibility in controlling electrohydrodynamic and hydroelectric effects at the water–solid interface to achieve preferred functions. Despite extensive progress, the cohesive and unified review of these two largely opposite effects is currently lacking. This review first discusses the important common foundations underpinning these two effects such as contact electrification and electric double layer (EDL), then takes a parallel approach to elaborate the electrohydrodynamic processes such as electrically induced liquid flow, wetting, and droplet motion, as well as the hydroelectricity resulting from their opposite processes. The practical applications and the unsolved challenges related to these two interfacial effects are also highlighted.
- 18 August 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 8 (2)
Electrohydrodynamic and Hydroelectric Effects at the Water–Solid Interface: from Fundamentals to Applications
Electrohydrodynamic and hydroelectric effects at the water–solid interface are of fundamental importance and also underpin many important applications ranging from the controlled liquid transport by applying an external electric field to the power generation from moving liquid. Also, recent advances in micro/nanofabrication and nanomaterials provide additional dimension and flexibility in controlling electrohydrodynamic and hydroelectric effects at the water–solid interface to achieve preferred functions. Despite extensive progress, the cohesive and unified review of these two largely opposite effects is currently lacking. This review first discusses the important common foundations underpinning these two effects such as contact electrification and electric double layer (EDL), then takes a parallel approach to elaborate the electrohydrodynamic processes such as electrically induced liquid flow, wetting, and droplet motion, as well as the hydroelectricity resulting from their opposite processes. The practical applications and the unsolved challenges related to these two interfacial effects are also highlighted.
- Top Cited Papers
- 5 February 2020
- Published by Springer Nature in Nature
- Vol. 578 (7795) , 392-396
A droplet-based electricity generator with high instantaneous power density
Extensive efforts have been made to harvest energy from water in the form of raindrops1,2,3,4,5,6, river and ocean waves7,8, tides9 and others10,11,12,13,14,15,16,17. However, achieving a high density of electrical power generation is challenging. Traditional hydraulic power generation mainly uses electromagnetic generators that are heavy, bulky, and become inefficient with low water supply. An alternative, the water-droplet/solid-based triboelectric nanogenerator, has so far generated peak power densities of less than one watt per square metre, owing to the limitations imposed by interfacial effects—as seen in characterizations of the charge generation and transfer that occur at solid–liquid1,2,3,4 or liquid–liquid5,18 interfaces. Here we develop a device to harvest energy from impinging water droplets by using an architecture that comprises a polytetrafluoroethylene film on an indium tin oxide substrate plus an aluminium electrode. We show that spreading of an impinged water droplet on the device bridges the originally disconnected components into a closed-loop electrical system, transforming the conventional interfacial effect into a bulk effect, and so enhancing the instantaneous power density by several orders of magnitude over equivalent devices that are limited by interfacial effects.
- 5 February 2020
- Published by Springer Nature in Nature
- Vol. 578 (7795) , 392-396
Top Cited PapersA droplet-based electricity generator with high instantaneous power density
Extensive efforts have been made to harvest energy from water in the form of raindrops1,2,3,4,5,6, river and ocean waves7,8, tides9 and others10,11,12,13,14,15,16,17. However, achieving a high density of electrical power generation is challenging. Traditional hydraulic power generation mainly uses electromagnetic generators that are heavy, bulky, and become inefficient with low water supply. An alternative, the water-droplet/solid-based triboelectric nanogenerator, has so far generated peak power densities of less than one watt per square metre, owing to the limitations imposed by interfacial effects—as seen in characterizations of the charge generation and transfer that occur at solid–liquid1,2,3,4 or liquid–liquid5,18 interfaces. Here we develop a device to harvest energy from impinging water droplets by using an architecture that comprises a polytetrafluoroethylene film on an indium tin oxide substrate plus an aluminium electrode. We show that spreading of an impinged water droplet on the device bridges the originally disconnected components into a closed-loop electrical system, transforming the conventional interfacial effect into a bulk effect, and so enhancing the instantaneous power density by several orders of magnitude over equivalent devices that are limited by interfacial effects.