LTLinling Tan

Linling Tan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Linling Tan has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • In-situ tracking of organic reaction dynamics: an infrared-temperature dual sensing approach using a single chalcogenide fiber

    by Xinxiang Huang, Shiliang Kang, Yanqing Fu, Linling Tan, Chengwei Gao, Shixun Dai, Changgui Lin

    Precise control over organic reaction dynamic requires in-situ insight into temperature and concentration variations. However, conventional detection strategies, often relying on off-line or decoupled methods, suffer from delayed responses and poor temporal synchronization. Herein, we propose a bifunctional single-fiber sensor based on Ge 5 As 25 Se 30 Te 40 chalcogenide glass, which seamlessly integrates fiber evanescent wave spectroscopy for chemical fingerprinting identification with a thermoresistive effect for thermal sensing. It exhibits exceptional performance with a rapid temperature response (∼2.6 s) and a high temperature sensitivity (| TCR |∼4.07 % K −1 ). Validated through the in-situ monitoring of ethyl butyrate synthesis, the single-fiber sensor effectively tracked reaction evolution and thermal distinctness, providing reliable guidance for process optimization and control. With its label-free detection, structural simplicity, and high sensitivity, this proposed strategy represents a robust process analytical technology tool for monitoring complex organic reactions.

  • Controllable fabrication of Er 3+ -doped chalcogenide glass-ceramic fibers with enhanced mid-infrared emission

    by Wenshuo Cui, Shiliang Kang, Saihui Li, Zipeng Liu, Yanqing Fu, Xinxiang Huang, Linling Tan, Chengwei Gao, Changgui Lin

    Hybrid matrices combining a glass host with acrystalline phase-specifically transparent glass ceramic (GC) fibers are critical for advancing mid-infrared (MIR) laser sources. Here, we demonstrate the fabrication of Er 3+ -doped chalcogenide GC fibers containing LaCl 3 nanophases via a tailored heating protocol. This strategy successfully encapsulates Er 3+ ions within a low-phonon-energy crystalline environment, yielding a robust emission peak at ∼2.7 µm. Notably, the GC fiber exhibits a 4.5-fold emission intensity enhancement compared with the as-prepared fiber. This optical improvement is attributed to the optimized local coordination environment of Er 3+ ions resulting from nanocrystal precipitation. Furthermore, numerical simulations utilizing rate and propagation equations confirm the feasibility of achieving 2.7 µm laser output. These findings underscore the potential of these GC fibers as robust candidates for MIR fiber laser applications.


  • Open Access

    Scalable Solid-Phase Preparation of High-Performance Li6PS5Cl Solid Electrolyte

    by Lanlan Xing, Chengwei Gao, Guangsheng Tang, Zhenyu Zhang, Zipeng Liu, Linling Tan, Shiliang Kang, Qing Jiao, Qiushi Dai, Jie Yang, et al.

    Li6PS5Cl (LPSC) is a widely studied chalcogenide-based solid state electrolyte due to its high ionic conductivity and excellent electrochemical stability. However, its path to scalable fabrication is hindered by the inherent limitations of conventional methods, which are often complex, prone to impurity, costly, and time-consuming. To address these limitations, this study investigates the scalable LPSC preparation via a melt-quenching and annealing method systematically. It is found that the ionic conductivity of LPSC solid electrolyte is positively correlated with its crystallinity of LPSC. Based on this understanding, the optimized LPSC subjected to annealing at 450 °C for 5 h achieved an excellent ionic conductivity of 2.87 mS cm-1, which could be further enhanced to 8.54 mS cm-1 after 50 h of prolonged heat treatment. Notably, a scaled-up batch synthesis (20 g) demonstrated exceptional ionic conductivity of 3.34 mS cm-1 and the Li-In|LPSC|TiS2 cell exhibit a capacity of 74.5 mAh g-1 at 60 cycles, validating the scalability of this method. These findings not only establish a novel strategy for efficient LPSC synthesis but also significantly advance its electrochemical performance through thermal condition optimization.

  • Open Access

    Infrared evanescent wave-temperature dual sensing from single Ge21Se3Te76 chalcogenide fiber

    by Weixiang Huang, Shiliang Kang, Long Chen, Yanqing Fu, Linling Tan, Chengwei Gao, Wenjie Xie, Changgui Lin

    Fiber infrared evanescent wave-temperature dual sensor can detect both organic molecules and temperature, demonstrating potential applications in healthcare, petrochemical industries and advanced energy storage systems. However, current fiber sensors are strictly limited to either infrared evanescent wave or temperature sensing, primarily due to the absence of suitable fiber sensing media. Here, a high-performance infrared evanescent wave-temperature dual sensor based on single Ge[Formula: see text]Se 3 Te[Formula: see text] chalcogenide glass fiber is developed. The obtained fiber exhibits a high Seebeck coefficient of 1410[Formula: see text] [Formula: see text]V/K, a precise temperature resolution of 0.03[Formula: see text]K, a fast response time of 6[Formula: see text]s and superior infrared evanescent wave sensing performance. Furthermore, the fibers can be integrated into a textile to detect temperature distribution and simultaneously detect organic substances such as ethanol and urea. These findings highlight that the fiber with superior infrared evanescent wave-temperature sensing performance may find potential applications in multifunctional sensing.


  • Compositional tailoring via source doping for intense NIR photoluminescence in solution-processed Er 3+ :As 2 Se 3 thin films

    by Jiajia Liu, Shiliang Kang, Chengwei Gao, Shixun Dai, Wenjie Xie, Changgui Lin, Linling Tan

    Rare-earth-doped chalcogenide films, as key materials for flexible optoelectronic integrated devices, have shown considerable potential in optical communications, precision metrology, and optical sensing. Herein, we address a persistent challenge in the dissolution of selenide glasses by developing an optimized ethylenediamine-based solvent system that enables exceptional solubility of As 2 Se 3 —up to 0.78 g/mL—in organic amine solvents. Leveraging this achievement, we engineered a highly uniform and reproducible spin-coating process for film fabrication. Through precise control of annealing temperature and Er 3+ doping concentration, we demonstrate, for the first time, intense near-infrared (NIR) photoluminescence (PL) at 1.5 µm from Er 3+ -doped As 2 Se 3 films, with optimal performance achieved at 3 mol% Er 3+ . Additionally, a source solution doping strategy was employed to tailor film composition, revealing the critical impact of introducing Se or As into the As 2 Se 3 precursor solutions on the luminescence efficiency of Er 3+ -doped films. This work provides a robust and scalable approach for the fabrication of high-performance chalcogenide luminescent films, advancing their application in next-generation photonic devices.

  • Enhanced acousto-optic properties at 1.55 µm wavelength from (As2S3)100-x(Te2S3)x chalcogenide glasses via tailoring of the network structure

    by Chaojun Zhu, Linling Tan, Lijia Jin, Hongjun Liu, Cheng Wang, Wei Wu, Zhongchao Wu, Feifei Chen, Shixun Dai, Changgui Lin

    Chalcogenide glasses (ChGs) attract attention for their excellent acousto-optic (AO) properties and broad applications in optical information processing. Te-based ChGs often have a high refractive index and large glass-forming region, suitable for high-performance AO devices. However, the correlation between composition, structure, and AO properties of As-S-Te ternary glasses is unclear, limiting their AO device applications. Here, the influence of Te2S3 content on optical, thermo-mechanical and AO properties of (As2S3)100-x(Te2S3)x glasses is investigated. Appropriate Te2S3 introduction induces the transformation from AsS3 pyramids into AsS2Te mixed pyramidal units, enhancing the AO figure of merit (M2). Excessive Te2S3 content replaces strong covalent As-S bonds with weaker As-Te bonds, leading to adverse effects such as the increase of acoustic attenuation (α) and thermo-optical coefficient (dn/dT) and the decrease of laser-induced damage threshold (LIDT). This work provides theoretical guidance and an experimental basis for optimizing the composition design of As-S-Te glasses and fabricating high-performance AO devices.


  • Design and preparation of chalcogenide glass doublet lenses for infrared optical system

    by Gangjie Zhou, Jinjin Chen, Peikuan Fan, Linling Tan, Chengwei Gao, Shiliang Kang, Shixun Dai, Changgui Lin

    In the realm of infrared (IR) optics, IR doublet lenses have garnered a lot of attention due to their ability to correct for aberrations. A new series of Ge 15 Se 85‒ x Te x (5 ≤ x ≤ 30) chalcogenide glass was developed to possess similar glass transition temperature, excellent thermal stability, and large refractive index variation, which enable them to be a good glass material catalog for IR doublet lenses. First, six glasses were successfully molded into one using thermal bonding, and its refractive index distribution was investigated. To lower the dispersion of IR doublet lenses, the two most suited materials were chosen from the above material library on the basis of their Abbe number ( ν ) and dispersion ( p ) value. With the created doublet lenses, an IR optical system with a wavelength of 3‒12 µm was designed. The system's modulation transfer function curve demonstrated its good imaging performance (>0.3 @ 24 cycles/mm). Through additional optical design, we discovered that modifying the curvature of the internal interface of the IR doublet lens could reduce the length of the optical system by 17% while maintaining its performance.


  • Highly Er3+ doped chalcogenide glass with enhanced mid-infrared emission and superior mechanical property

    by Qingquan Yu, Shengpeng Wang, Yanqing Fu, Linling Tan, Chengwei Gao, Changgui Lin, Shiliang Kang

    Mid-infrared (MIR) lasers, owing to their high beam quality and super robustness, are widely used in fields from surgery, environmental monitoring, and material processing to eye-safe laser radar. However, their development is greatly limited by the lack of optical gain materials with both high rare earth doping content and excellent mechanical resistibility. Here, highly Er3+-doped Ga2S3-La2S3-La2O3 chalcogenide glasses (ChGs) up to ≈2.1 × 1021 cm-3 in Er3+ concentration are obtained. The resulting glass shows high glass transition temperature (547.2 °C) and large Vickers hardness (4.82 Gpa), which is substantially greater than those of other ChGs. The intensity of 2.7 µm emission drastically increases with increasing Er2S3 content and reaches a maximum at 10 mol% Er2S3. Moreover, the emission cross-section and the gain bandwidth at 2.7 µm are as large as 13.79 × 10−21 cm2 and 1.34 × 10−25 cm3 at 10 mol% Er2S3, respectively. Our results provide a facile and general strategy for developing high-gain rare earth-doped MIR laser materials.


  • Fiber-Shaped Temperature Sensor with High Seebeck Coefficient for Human Health and Safety Monitoring

    by Shengpeng Wang, Shiliang Kang, Yanqing Fu, Qingquan Yu, Linling Tan, Chengwei Gao, Changgui Lin

    Wearable thermoelectric (TE)-based temperature sensors capable of detecting and transmitting temperature data from the human body and environment show promise in intelligent medical systems, human-machine interfaces, and electronic skins. However, it has remained a challenge to fabricate the flexible temperature sensors with superior sensing performance, primarily due to the low Seebeck coefficient of the TE materials. Here, we report an inorganic amorphous TE material, Ge5As55Te40, with a high Seebeck coefficient of 1050 μV/K, which is around 3 times higher than the organic TE materials and 2 times higher than the inorganic crystal TE materials. Due to the strong anticrystallization ability, the amorphous state of Ge5As55Te40 can be well maintained during the thermal fiber-drawing process. The resulting TE fibers demonstrate superior temperature sensing properties, encompassing a broad working range (25-115 °C), a precise temperature resolution of 0.1 K, and a rapid response time of 5 s. Importantly, the TE properties of the fiber show high stability after repeated temperature variations between 5 and 10 K. Moreover, the fibers can be integrated into a mask and a wearable fabric for monitoring human respiratory rate and providing early warning for fire source proximity. These results highlight that the TE fiber with both natural flexibility and superior temperature sensing performance may find potential applications in wearable systems.


  • Broadband NIR emission from Te doped silicate glass as gc-LED light source for biological detection

    by Chenfeng Lian, Xin Ye, Shiliang Kang, Chengwei Gao, Tiefeng Xu, Shixun Dai, Changgui Lin, Linling Tan