Angela de Mello Ferreira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Angela de Mello Ferreira has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
Gabriela Cordeiro Silva
4 shared publicationsNatália Cristina Candian Lobato
4 shared publicationsGabriela C. Silva
National Institute of Science and Technology on Mineral Resources, Water and Biodiversity (INCT-Acqua), Brazil
3 shared publicationsMagnum Augusto Moraes Lopes de Jesus
Chemistry Department, Universidade Federal de Minas Gerais, ICEx, Belo Horizonte, Brazil
3 shared publications- Marcelo Borges Mansur
Universidade Federal do Rio de Janeiro (UFRJ)
3 shared publications Paulo Renato P. Paiva
Centro Federal de Educação Tecnológica de Minas Gerais (Cefet-MG)
3 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Cerâmica
- Vol. 72
Síntese, Caracterização e Estudo da Decomposição do Carbeto de Alumínio visando à Reciclagem do Resíduo Refratário de Magnésia-Carbono (MgO-C)
Resumo A reciclagem de refratários do tipo magnésia-carbono (MgO-C) enfrenta desafios associados à presença de carbeto de alumínio (Al4C3), formado durante sua utilização no processo siderúrgico. Esse composto compromete a qualidade de tijolos produzidos com matéria-prima reciclada, ocasionando defeitos como trincas ou desagregação. Este trabalho investigou a formação e decomposição do Al4C3, visando viabilizar o reaproveitamento seguro de resíduos de MgO-C. Para isso, foi realizada a síntese do Al4C3 em atmosfera redutora, e sua decomposição avaliada pelas técnicas de difração de Raios X, análise termogravimétrica, e área superficial específica por adsorção de nitrogênio. O material sintetizado foi caracterizado por microscopia eletrônica de varredura acoplada à espectroscopia por dispersão de energia, espectroscopia Raman e perda ao fogo. Observou-se formação de Al4C3 em 1400 °C e sua decomposição por hidrólise, com formação de hidróxido de alumínio após 18 dias de exposição à umidade. Conclui-se que, com a decomposição do carbeto de alumínio, os resíduos de MgO-C podem ser reutilizados na produção de refratários, promovendo economia circular, redução de resíduos e emissões de dióxido de carbono (CO2) na siderurgia.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Cerâmica
- Vol. 72
Open AccessSíntese, Caracterização e Estudo da Decomposição do Carbeto de Alumínio visando à Reciclagem do Resíduo Refratário de Magnésia-Carbono (MgO-C)
Resumo A reciclagem de refratários do tipo magnésia-carbono (MgO-C) enfrenta desafios associados à presença de carbeto de alumínio (Al4C3), formado durante sua utilização no processo siderúrgico. Esse composto compromete a qualidade de tijolos produzidos com matéria-prima reciclada, ocasionando defeitos como trincas ou desagregação. Este trabalho investigou a formação e decomposição do Al4C3, visando viabilizar o reaproveitamento seguro de resíduos de MgO-C. Para isso, foi realizada a síntese do Al4C3 em atmosfera redutora, e sua decomposição avaliada pelas técnicas de difração de Raios X, análise termogravimétrica, e área superficial específica por adsorção de nitrogênio. O material sintetizado foi caracterizado por microscopia eletrônica de varredura acoplada à espectroscopia por dispersão de energia, espectroscopia Raman e perda ao fogo. Observou-se formação de Al4C3 em 1400 °C e sua decomposição por hidrólise, com formação de hidróxido de alumínio após 18 dias de exposição à umidade. Conclui-se que, com a decomposição do carbeto de alumínio, os resíduos de MgO-C podem ser reutilizados na produção de refratários, promovendo economia circular, redução de resíduos e emissões de dióxido de carbono (CO2) na siderurgia.
- 1 November 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (45) , 28533-28542
Exploring the electrochemical properties and lithium insertion mechanisms in akaganeite (β-FeOOH) – a combined DFT/experimental study
Akaganeite (β-FeOOH) has been intensely investigated to be used in different electrochemical applications as a cathode material in Li-ion batteries owing to its unique structural characteristics, including channels capable of accommodating and reversibly extracting charged species such as lithium or sodium ions. We revisited the synthesis, and its electrochemical properties based on a combined experimental/theoretical approach aiming to understand the mechanism of the electron transfer in this material. Electrochemical investigations, employing Li2SO4 aqueous electrolyte, unveiled notable alterations in the charge/discharge profiles. The initial discharge curve revealed distinct plateaus at 3.4 V and 2.9 V, with the absence of the former in subsequent cycles, indicating irreversible reactions in the initial cycle. Furthermore, density functional theory (DFT) calculations were employed to elucidate the impact of lithium atom insertion on the electronic and structural properties of akaganeite. We gained insights into the underlying electrochemical processes calculating band structures, density of states, and topological analysis based on Bader's theory. The calculated oxidation potentials (3.2 V) closely matched experimental observations, attributing the 3.2 V plateau to lithium insertion into the akaganeite structure.
- 1 November 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (45) , 28533-28542
Exploring the electrochemical properties and lithium insertion mechanisms in akaganeite (β-FeOOH) – a combined DFT/experimental study
Akaganeite (β-FeOOH) has been intensely investigated to be used in different electrochemical applications as a cathode material in Li-ion batteries owing to its unique structural characteristics, including channels capable of accommodating and reversibly extracting charged species such as lithium or sodium ions. We revisited the synthesis, and its electrochemical properties based on a combined experimental/theoretical approach aiming to understand the mechanism of the electron transfer in this material. Electrochemical investigations, employing Li2SO4 aqueous electrolyte, unveiled notable alterations in the charge/discharge profiles. The initial discharge curve revealed distinct plateaus at 3.4 V and 2.9 V, with the absence of the former in subsequent cycles, indicating irreversible reactions in the initial cycle. Furthermore, density functional theory (DFT) calculations were employed to elucidate the impact of lithium atom insertion on the electronic and structural properties of akaganeite. We gained insights into the underlying electrochemical processes calculating band structures, density of states, and topological analysis based on Bader's theory. The calculated oxidation potentials (3.2 V) closely matched experimental observations, attributing the 3.2 V plateau to lithium insertion into the akaganeite structure.
- 1 March 2020
- Published by Elsevier in Applied Surface Science
- Vol. 505
Microstructure and chemical stability analysis of magnetic core coated with SILICA and functionalized with silane OTS
- 1 March 2020
- Published by Elsevier in Applied Surface Science
- Vol. 505
Microstructure and chemical stability analysis of magnetic core coated with SILICA and functionalized with silane OTS
- 1 December 2019
- Published by Elsevier in Separation and Purification Technology
- Vol. 229, 115839
Improvement of magnetic solvent extraction using functionalized silica-coated Fe3O4 nanoparticles
- 1 December 2019
- Published by Elsevier in Separation and Purification Technology
- Vol. 229, 115839
Improvement of magnetic solvent extraction using functionalized silica-coated Fe3O4 nanoparticles
- 1 July 2019
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 19 (7) , 4338-4343
Functional Nanostructured Material for Wastewater Decontamination
In this study, an iron oxyhydroxide nanocomposite with magnetic properties has been successfully synthesized. The quantification of the phases determined by Rietveld refinement has shown the presence of 74% of β-FeOOH (akaganeite) and 26% of Fe3O4 (magnetite). TEM images show aggregates of around 5–15 nm Fe3O4 nanoparticles with cubic morphology and β-FeOOH somatoids and nanorods with length and width of 100–200 nm and 10–50 nm, respectively. The estimated maximum adsorption capacities for As(III) and As(V) at pH 5 are similar (9 ± 1 and 8.1 ± 0.8 mg/g, respectively), suggesting the elimination of the oxidation step usually used in As(III) removal by precipitation. In low concentrations, the removal is efficient indicating that the magnetic composite shows potential for use in the removal of trace concentrations. Therefore, the magnetic nanocomposite shows potential for use in the removal of arsenic in aqueous media, eliminating the filtration step by applying a magnetic field.
- 1 July 2019
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 19 (7) , 4338-4343
Functional Nanostructured Material for Wastewater Decontamination
In this study, an iron oxyhydroxide nanocomposite with magnetic properties has been successfully synthesized. The quantification of the phases determined by Rietveld refinement has shown the presence of 74% of β-FeOOH (akaganeite) and 26% of Fe3O4 (magnetite). TEM images show aggregates of around 5–15 nm Fe3O4 nanoparticles with cubic morphology and β-FeOOH somatoids and nanorods with length and width of 100–200 nm and 10–50 nm, respectively. The estimated maximum adsorption capacities for As(III) and As(V) at pH 5 are similar (9 ± 1 and 8.1 ± 0.8 mg/g, respectively), suggesting the elimination of the oxidation step usually used in As(III) removal by precipitation. In low concentrations, the removal is efficient indicating that the magnetic composite shows potential for use in the removal of trace concentrations. Therefore, the magnetic nanocomposite shows potential for use in the removal of arsenic in aqueous media, eliminating the filtration step by applying a magnetic field.
- 8 November 2018
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 89 (2) , 380-391
A systematic study of multifunctional xTiO2/(100 − x)SiO2 thin films prepared by sol–gel process
- 8 November 2018
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 89 (2) , 380-391
A systematic study of multifunctional xTiO2/(100 − x)SiO2 thin films prepared by sol–gel process
- Open Access
- 1 October 2018
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 185, 517-523
Anti-soiling coatings for solar cell cover glass: Climate and surface properties influence
- 1 October 2018
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 185, 517-523
Open AccessAnti-soiling coatings for solar cell cover glass: Climate and surface properties influence
- Open Access
- 15 February 2018
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 21 (2)
Microstructural Assessment of Magnetite Nanoparticles (Fe3O4) Obtained by Chemical Precipitation Under Different Synthesis Conditions
Magnetite nanosized particles synthesis was achieved by two different routes. Assessment of microstructure was carried out aiming at comparing the outcome of synthesis parameters on the crystallinity, distribution of particle dimension and magnetic activity of nanosized particles precipitated in aqueous solution. Increasing of the nanoparticles crystallite size by stirring could be evidenced by the results. Temperature does not significantly affect crystallite size and crystallinity. The type of precursor was the factor that most contributed to the definition of crystallinity and particle size distribution. The route which used FeSO4.7H2O as precursor favored large crystallite sizes and crystallinity, while the route which used Fe2SO4.7H2O and FeCl3.6H2O as precursors resulted in much smaller crystallite sizes and crystallinity.
- 15 February 2018
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 21 (2)
Open AccessMicrostructural Assessment of Magnetite Nanoparticles (Fe3O4) Obtained by Chemical Precipitation Under Different Synthesis Conditions
Magnetite nanosized particles synthesis was achieved by two different routes. Assessment of microstructure was carried out aiming at comparing the outcome of synthesis parameters on the crystallinity, distribution of particle dimension and magnetic activity of nanosized particles precipitated in aqueous solution. Increasing of the nanoparticles crystallite size by stirring could be evidenced by the results. Temperature does not significantly affect crystallite size and crystallinity. The type of precursor was the factor that most contributed to the definition of crystallinity and particle size distribution. The route which used FeSO4.7H2O as precursor favored large crystallite sizes and crystallinity, while the route which used Fe2SO4.7H2O and FeCl3.6H2O as precursors resulted in much smaller crystallite sizes and crystallinity.
- 13 July 2017
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 76 (14) , 480
Biological re-colonization of sub-aerial boundaries of an ‘artificial construction-niche’ contaminated by iron mine tailings: laboratory bioassays
- 13 July 2017
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 76 (14) , 480
Biological re-colonization of sub-aerial boundaries of an ‘artificial construction-niche’ contaminated by iron mine tailings: laboratory bioassays
- Open Access
- 10 April 2017
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 20 (3) , 736-746
Characterization and Chemical Stability of Hydrophilic and Hydrophobic Magnetic Nanoparticles
Magnetic nanoparticles can improve the efficiency of phase separation time in multi-stage operations when a magnetic field is present. As such operations involve contact with aqueous and/or organic solutions, hydrophilic magnetic nanoparticles synthesized through the co-precipitation method were functionalized with oleic acid to attain hydrophobic magnetic nanoparticles. Both nanoparticles were characterized morphologically, chemically and magnetically. The results revealed that the particles (size ≈ 10 nm) consisted of an iron oxide mixture of magnetite and maghemite. The functionalization with oleic acid was effective in converting them into hydrophobic nanoparticles. Both particles were ferro/ferrimagnetic and the presence of oleic acid did not interfere significantly in the saturation magnetization value. The chemical stability of both nanoparticles were also evaluated, as an attempt of simulating broad industrial conditions to which the nanoparticles may be subjected; the hydrophilic nanoparticles were resistant at pH ≥ 4, while the hydrophobic nanoparticles were stable at pH ≥ 3.
- 10 April 2017
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 20 (3) , 736-746
Open AccessCharacterization and Chemical Stability of Hydrophilic and Hydrophobic Magnetic Nanoparticles
Magnetic nanoparticles can improve the efficiency of phase separation time in multi-stage operations when a magnetic field is present. As such operations involve contact with aqueous and/or organic solutions, hydrophilic magnetic nanoparticles synthesized through the co-precipitation method were functionalized with oleic acid to attain hydrophobic magnetic nanoparticles. Both nanoparticles were characterized morphologically, chemically and magnetically. The results revealed that the particles (size ≈ 10 nm) consisted of an iron oxide mixture of magnetite and maghemite. The functionalization with oleic acid was effective in converting them into hydrophobic nanoparticles. Both particles were ferro/ferrimagnetic and the presence of oleic acid did not interfere significantly in the saturation magnetization value. The chemical stability of both nanoparticles were also evaluated, as an attempt of simulating broad industrial conditions to which the nanoparticles may be subjected; the hydrophilic nanoparticles were resistant at pH ≥ 4, while the hydrophobic nanoparticles were stable at pH ≥ 3.