Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tesfaldet Hadgembes Gebre has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Anisotropic Behavior of 3D-Printed Concrete: Interlayer Bonding, Pore Architecture, Reinforcement Limitations, and Durability Mechanisms

    by Ali Mardani, Mohammad Hematibahar, Selin Özteber, Qais Abdulrahman Ali Qais, Ivan Khalil, Tesfaldet Hadgembes Gebre, Ahmed Elsheikh

    The structural use of three-dimensional concrete printing remains limited by the directional weakness introduced during extrusion and layer-by-layer deposition. Although 3DPC offers major advantages in formwork elimination, architectural freedom, and automated construction, its printed architecture produces interfaces, pore networks, and reinforcement discontinuities that do not exist in the same form in conventionally cast concrete. This review examines the anisotropic behavior of 3DPC by linking its architectural arrangement, physical interlayer mechanisms, and chemical durability-related processes. The analysis shows that anisotropy develops from the combined effects of filament orientation, interlayer bonding quality, pore morphology, cold-joint formation, mechanical interlocking, hydration continuity, and reinforcement limitations. Weak interlayer regions act not only as preferred paths for crack initiation and propagation under tensile, flexural, shear, and compressive loading, but also as transport channels that accelerate water absorption, chloride ingress, carbonation, sulfate attack, and freeze–thaw deterioration. The review further highlights that fiber, textile, FRP, and discrete reinforcement strategies can reduce some consequences of anisotropy, but their effectiveness depends on whether they bridge the weaker interlayer regions rather than merely reinforcing the filament direction. SEM-based observations confirm that microstructural discontinuities, fiber-matrix debonding, irregular hydration products, and connected pores provide the material-level basis for the directional response of printed concrete. Overall, anisotropy should be treated as a design-critical feature of 3DPC rather than as a secondary defect. Reliable structural application requires coordinated control of mixture rheology, deposition parameters, interlayer timing, curing, toolpath design, and reinforcement layout.


  • Open Access

    Interface-Controlled Structural Behaviour of 3D Printed Concrete: Lessons from Masonry for Anisotropy, Print-Path Design and Standardisation

    by Ali Mardani, Mohammad Hematibahar, Selin Özteber, Qais Abdulrahman Ali Qais, Abbas Abdulhussein Abd Noor, Tesfaldet Hadgembes Gebre, Ahmed Elsheikh

    The structural application of 3D printed concrete (3DPC) is still constrained by the difficulty of qualifying a layered, process-dependent material using standards developed mainly for cast concrete and conventional masonry. This review examines 3DPC through masonry construction to clarify how interface-controlled behaviour should be interpreted, tested and standardised. The comparison is not based on material similarity, but on the shared structural role of joints, interfaces and assemblage-level load transfer. Most previous reviews mainly discuss printability, mixture design, material development or general mechanical performance. This review instead places the printed interface at the centre of structural qualification, using masonry only as a reference for interpreting joint-controlled load transfer. The review shows that compressive strength alone is insufficient for structural qualification, since printed elements may fail through interlayer debonding, direction-dependent cracking, filament instability, reinforcement discontinuity or connection weakness. Flexural, shear, cyclic and seismic responses are particularly sensitive to interlayer quality, loading orientation and print-path geometry. Existing concrete, mortar and masonry standards remain useful references, but require 3DPC-specific reporting and testing. Accordingly, a tiered qualification route is proposed, progressing from fresh-state characterisation to interface-dominated testing and structural-scale validation.

  • Open Access

    Experimental evaluation of mechanical strength of silica fume-cemented sand reinforced with 3D-printed fibers

    by Mohammad Hematibahar, Nikolai Vatin, Jana Petrů, Muhammad Nasir Bashir, Ali Hasanzadeh, Tesfaldet Gebre, Amir Ali Milani, Amir Bakhtiyari


  • Open Access

    Machine Learning‐Based Failure Prediction in Concrete Slabs and Cubes Under Impact Loading

    by Mohammad Hematibahar, Ahmed Deifalla, Adham E. Ragab, Gebre Tesfaldet

    Experts have been interested in the behavior of concrete under impact loading because of its wide range of applications in construction projects. Due to their quasi‐brittle nature, failure modes related to concrete may occur without any prior warning signs of destruction, and they also expose the supporting element to the spread of damage. Finite element modeling and machine learning techniques are essential for conducting an adequate reliability investigation of the behavior of concrete samples as slabs and cubes under impact load. The research uses gradient boosting, random forest, lasso, linear regression, and support vector regression to create predictive models for the behavior of these two concrete models. The models were created by taking experimental concrete slab tests and 20 cubes into consideration. Design standards‐based statistical comparisons such as coefficient of determination and root mean square error are used to assess the efficacy of the generated models. These results show that with increasing impact load intensity, displacements and failures in the slab increase significantly. Using these models allows engineers to design more resistant and optimal structures against impact loads. This research shows that machine learning models, especially random forest and gradient boosting, can provide accurate predictions of failures and cracks in concrete under impact loads and are useful tools for analyzing concrete behavior under dynamic and complex conditions. The linear regression with a coefficient of determination (R2) of 0.995 and lasso regression with RMSE of 3.9 have the lowest accuracy, while random forest and gradient boosting models with R2 of 0.9991 and 0.2, 0.991 and 0.5. respectively, showed higher accuracy in predicting concrete cracks and failures.


  • Open Access

    Differences between 3D printed concrete and 3D printing reinforced concrete technologies: a review

    by Komeil Momeni, Nikolai Ivanovich Vatin, Mohammad Hematibahar, Tesfaldet Hadgembes Gebre

    This review aims to provide a comprehensive analysis of the difference between 3D printed concrete (3DPC) and 3D printing reinforced concrete (3DPRC) technologies, as well as potential future paths for these technologies based on current consolidated approaches. Although 3D printed reinforced concrete technology attempts to strengthen reinforced concrete using 3D printing technologies with polymer ingredients, 3D printed concrete technology concentrates on printing concrete for building concrete structures. In recent years, both technologies have advanced rapidly and become a global research innovation hotspot due to their advantages over traditional construction technology, such as high building efficiency, low labor costs, and less construction waste. Unfortunately, there are several issues with 3DPC and 3DPRC technologies, including competing rheological requirements, integrating hurdles, inadequate interlayer bonding, and anisotropic properties of the material that result in lacking structural performance. The findings of the investigation discuss research gaps and theoretical possibilities for future development in both 3D printing technologies, which can advance concrete technology and safeguard structures under various loads. In the present study, two distinct 3D printing technologies are analyzed, along with their respective uses in material and structural engineering. Additionally, the advantages, methods, and materials utilized for the two types of 3D printing technology are described, and the difficulties and solutions associated with using 3D printed concrete in real-world projects are demonstrated. None of the earlier investigations examined the differences between these two technologies. Although 3DPRC technologies aim to strengthen concrete by incorporating various forms of 3D printed technology, 3DPC technology has been studied for its mechanical qualities and concrete rheology. Meanwhile, engineers in 3D printed concrete technologies try to improve large-scale 3D printers and the mechanical properties of printed concrete, while 3D printing reinforced concrete engineers try to design new patterns of 3D reinforcing patterns due to the improved mechanical properties of concrete. The present study examines the differences between 3DPC and 3DPRC technologies.


  • Open Access

    Effect of using 3D-printed shell structure for reinforcement of ultra-high-performance concrete

    by Mohammad Hematibahar, Nikolai I. Vatin, Taheri Jafari Hamid, Tesfaldet H. Gebre

    This study aims to investigate the effect of 3D-printed polymer shell reinforcemen ton ultra-high-performance concrete. The mechanical properties of ultra-high-performance polymer reinforced concrete have been investigated. At first, the 3D-printed shell reinforcements were designed using 3D Max and Rhino 6 software. Then, each was fabricated through the fused deposition modeling method and positioned into the cubic, cylindrical, and prismatic molds. In the next step, the prepared Ultra-High-Performance Concrete mixture was poured into the molds, and the samples were cured for 28 days. Finally, the compressive, tensile, and flexural strength tests were carried out on the samples. The results indicated that the compressive, tensile, and flexural strengths of reinforced samples were lower than that of the unreinforced ones, respectively. Although including 3D-printed reinforcement decreased the mechanical properties of the Ultra-High-Performance Concrete samples, it changed the fracture mechanism of concrete from brittle to ductile.


  • Open Access

    Effect of gelatin powder, almond shell, and recycled aggregates on chemical and mechanical properties of conventional concrete

    by Mohammad Hematibahar, Alireza Esparham, Nikolai I. Vatin, Makhmud I. Kharun, Tesfaldet H. Gebre, Харун Махмуд

    The objective of the research is to study the effect of different additives on the conventional concrete. In this term, three types of materials have been added to the concrete: gelatin powder as the binder, recycled aggregates, and almond shell as the fine and coarse aggregates. Several experiments have been made tо determine physical and mechanical properties, such as test for compressive and tensile strengths, for impact loading strength, durability test (water absorption) and deep penetration tests. Moreover, the microstructure results for the new type of concrete have been studied by means of scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDXS). The results show that when 70 kg of gelatin powder is added to 1 m3 of concrete, the concrete’s compressive strength and tensile strength are improved more than 22%; during impact loading the first and ultimate cracks are 11 and 129 by numbers, and the first and ultimate cracks’ strength is more than 223 and 2346 J respectively. The durability of sample from concrete with additional gelatin has been improved. SEM results illustrate that the weakness of almond shell concrete is related to cracks and voids between the cement matrix and almond shell. The voids of gelatin concrete are higher than that of conventional concrete. The conventional concrete has smooth crystals, and gelatin concrete has sharp and cubic crystals. EDXS results show that chemical content of these two types of concrete is different: conventional concrete contains silicon, while EDXS results show that chemical content of these two types of concrete is different: conventional concrete contains silicon, while gelatin concrete contains calcium and also C-S-H gel is generated in it.


  • Open Access

    Experimental and numerical investigation of thin-walled I-section beam under bending and torsion

    by Tesfaldet H. Gebre, Vera V. Galishnikova, Evgeny V. Lebed

    The aim of the research - to investigate the behavior of thin-walled beam I-section loaded with bending and torsion using theoretical, numerical, and experimental approaches. In this paper, the main criteria for consideration of the different methods of analysis is the geometric characteristic of the section. The results obtained by the finite element method, the numerical method, as well as experimental data are compared. The analysis by finite element method by considering an additional degree of freedom at a node to include the restrained torsion and the dimension of the stiffness matrix is thus 14×14. The results of the calculation according to this theory are compared with the numerical solution obtained using finite element software, and with the results of the experiment. The I-beam section subject to bending with torsion is considered. The deformations, strain, and stress distributions of open thin-walled structures subjected to bending and torsion are presented using experimental methods. The comparative results for the angle of twisting, deformations, and normal stresses in the frame element subjected to combined loading are displayed graphically. To evaluate the results, a theoretical, numerical, and experimental investigation of I-beam behavior under bending and restrained torsion was carried out. As a result of the comparison, it was revealed that the results obtained according to the refined theory proposed by the authors have good convergence with experimental data and are also quite close to the values obtained using commercial software.


  • Finite Element Analysis of 3D Thin-Walled Beam with Restrained Torsion

    by Tesfaldet Gebre, Vera Galishnikova, Evgeny Lebed, Evgeniya Tupikova, Zinah Awadh


  • Open Access

    Properties and behavior of light hydrophobic concrete

    by Makhmud Kharun, Armin Ehsani, Shahin Nasimi, Tesfaldet H. Gebre, Харун Махмуд

    In concrete mixing plan, we usually encounter a combination of aggregates including sand, the amount of cement, which is actually the criterion of concrete grade, and the volume of water consumed. Changes in the quality and quantity of these components actually create the usual types of concrete. But the attitude that formed the basis of this research is based on the change in the nature of the components of the concrete mixing design. Removal of water and cement from the mixing plan and replacement of polymeric materials as well as the use of mixed LECA aggregates instead of aggregates is the basis of this research. In this paper, by examining and selecting LECA grain style and pre-treatment (hydrophobicity and coupling), in a constant ratio of resin, concrete samples were selected from three dimensional categories. After making the samples, flexural strength test was performed on them and the results were analyzed. Various compounds and processes have so far been proposed in the lightweight concrete mixing scheme. The distinctive point of this study is the use of lightweight expanded clay concrete with heat-treated acrylic polymer (crosslinking constituents) and related coupling agents. It is also important to select and apply the right amount of hydrophobic nanoparticles for hydrophilic surface hydrophobicity. Hydrophobicity was possible due to the non-polar nature of the acrylic polymer and the use of hydrophobic nanomaterials.