GYGuo-Wei Yuan

Guo-Wei Yuan

*This is an algorithmically generated author record based on publicly available information.

Guo-Wei Yuan has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synergistic Mechanisms of Core–Shell Nanoparticle/Surfactant Combination Systems in Low-Permeability Reservoirs, Injection Parameter Optimization, and Field Pilot Response

    by Yangnan Shangguan, Jinghua Wang, Kang Tang, Hua Guan, Futeng Feng, Yun Bai, Qi Wang, Rui Huang, Guowei Yuan, Tuo Liang

    Low-permeability reservoirs at the high-water-cut stage commonly suffer from dominant water channel development, poor sweep of weakly connected zones, and inefficient mobilization of remaining oil. Existing profile control or oil displacement agents can improve either flow diversion or microscopic oil displacement, but their single-agent evaluation does not fully explain the coupled process of sweep expansion and remaining oil mobilization. To address this issue, this study focuses on a previously optimized HK-0417/ALT-603 composite system and investigates its synergistic behavior at pore, core, and well group scales. Microscopic visualization displacement experiments were used to identify streamline redistribution and remaining oil evolution. Natural core experiments were conducted to evaluate injectivity adaptability and plugging persistence. Under slug injection conditions, the Box–Behnken design was employed to optimize the injection parameters. Finally, the field pilot response was analyzed based on production data from test wells in the Changqing Oilfield. The results show that the combination system simultaneously achieves streamline expansion and residual oil reduction: the injected fluid is redistributed toward weakly swept zones, large continuous oil bodies are fragmented and dispersed, and both sweep efficiency and oil displacement efficiency are superior to those of individual agents. Natural core experiments indicate that the injection pressure difference is generally controllable in cores with permeabilities ranging from 1.76 to 7.02 mD, and the plugging rate during subsequent water flooding reaches 75.47–80.54%. Response surface optimization yields the following optimal parameter combination: profile control slug volume = 0.41 pore volume (PV), oil displacement slug volume = 0.61 PV, injection rate = 0.19 mL/min, with a corresponding predicted enhanced oil recovery (EOR) of 18.52%. In the field pilot, the cumulative injection volumes of the two injectors are 41,898 kg and 61,472 kg, respectively. The injection pressure in the well group increases from 5.8 MPa to 7.0 MPa, the comprehensive water cut decreases from 90.6% to 85.3%, and the monthly decline rate is reduced from 0.5% to 0.2%. The proposed system mainly acts by increasing flow resistance and redirecting flow in high-water-cut channels, while it enhances oil detachment through interfacial tension reduction in oil-bearing pores. After optimizing the slug parameters, the field pilot exhibits a clear phased response and promising application potential.


  • Open Access

    Research on Control Factors and Parameter Optimization of Surfactant Flooding in Low-Permeability Reservoirs Using Random Forest Algorithm

    by Yangnan Shangguan, Chunning Gao, Junhong Jia, Jinghua Wang, Guowei Yuan, Huilin Wang, Jiangping Wu, Ke Wu, Yun Bai, Hengye Liu, et al.

    As oil and gas development increasingly targets low and ultra-low permeability reservoirs, conventional recovery techniques often prove insufficient for mobilizing residual oil. Surfactant flooding, a key chemical enhanced oil recovery (EOR) technology, thus requires careful system optimization and mechanistic investigation. This study focuses on low-permeability reservoirs in the Changqing Oilfield, evaluating three surfactant systems—YHS-Z1 (a 7:3 mass ratio blend of hydroxypropyl sulfobetaine and cocamide), YHS-Z2 (a polyether carboxylate, a nonionic-anionic composite) and a middle-phase microemulsion system (Heavy alkylbenzene sulfonate and hydroxysulfobetaine were combined with a mass ratio of 7:3)—through a series of experiments including interfacial tension measurement, contact angle analysis, static and dynamic oil displacement tests, as well as emulsion transport/retention index assessments, to comprehensively characterize their oil displacement properties. Based on the experimental data, this study constructed four classical regression models: Ridge Regression, Random Forest (RF), Gradient Boosting Regression (GBR), and Support Vector Regression (SVR), and conducted a comparative analysis of their predictive performance. The results demonstrate that the Random Forest (RF) model achieved the optimal prediction performance, with a Mean Absolute Error (MAE) of 1.8245, a Mean Absolute Percentage Error (MAPE) of 4.78%, and a coefficient of determination (R2) of 0.9428 on the training set. Further analysis using the SHapley Additive exPlanations (SHAP) algorithm revealed that the retention index is the primary global factor (accounting for 49.79% of the variance), while significant intergroup differences exist in the primary factors across different surfactant systems. Concurrently, single-factor and multi-factor sensitivity analyses were conducted to elucidate synergistic effects and threshold behaviors among parameters. The optimal parameter combination, identified via a random search method, achieved a predicted recovery factor of 45.61%, representing a 6.57% improvement over the highest experimental value. This study demonstrates that machine learning methods can effectively identify the dominant factors in oil displacement and enable synergistic parameter optimization, thereby providing a theoretical foundation for the efficient development of surfactant flooding in low-permeability reservoirs.


  • Open Access

    Research on Control Factors and Parameter Optimization of Surfactant Flooding in Low-Permeability Reservoirs Using Random Forest Algorithm

    by Yangnan Shangguan, Chunning Gao, Junhong Jia, Jinghua Wang, Guowei Yuan, Huilin Wang, Jiangping Wu, Ke Wu, Yun Bai, Hengye Liu, et al.

    As oil and gas development increasingly targets low and ultra-low permeability reservoirs, conventional recovery techniques often prove insufficient for mobilizing residual oil. Surfactant flooding, a key chemical enhanced oil recovery (EOR) technology, thus requires careful system optimization and mechanistic investigation. This study focuses on low-permeability reservoirs in the Changqing Oilfield, evaluating three surfactant systems—YHS-Z1 (a 7:3 mass ratio blend of hydroxypropyl sulfobetaine and cocamide, YHS-Z2 (a polyether carboxylate, a nonionic-anionic composite) and a middle-phase microemulsion system (Heavy alkylbenzene sulfonate and hydroxysulfobetaine were combined with a mass ratio of 7:3)—through a series of experiments including interfacial tension measurement, contact angle analysis, static and dynamic oil displacement tests, as well as emulsion transport/retention index assessments, to comprehensively characterize their oil displacement properties. Based on the experimental data, five machine learning models—Linear Regression, Support Vector Regression, XGBoost, Gradient Boosting Regression, and Random Forest—were constructed and comparatively analyzed for their predictive performance. The results demonstrate that the Random Forest (RF) model achieved the optimal prediction performance (MAE = 2.8007%, MAPE = 7.4107%, R² = 0.0454). Further analysis using the SHAP algorithm revealed that the retention index is the primary global factor (accounting for 49.79% of the variance), while significant intergroup differences exist in the primary factors across different surfactant systems. Concurrently, single-factor and multi-factor sensitivity analyses were conducted to elucidate synergistic effects and threshold behaviors among parameters. The optimal parameter combination, identified via a random search method, achieved a predicted recovery ratio of 45.61%, representing a 6.57% improvement over the highest experimental value. This study demonstrates that machine learning methods can effectively identify the dominant factors in oil displacement and enable synergistic parameter optimization, thereby providing a theoretical foundation for the efficient development of surfactant flooding in low-permeability reservoirs.


  • Study on Geological Characteristics and Distribution Law of Remaining Oil in Changqing H Area

    by Guo-Wei Yuan, Jun-Hong Jia, Qi-Liang Mei, Yong-Qiang Zhang, Wei-Liang Xiong, Liang Fu, Yang-Nan Shangguan, Qian-Qian Tian


  • Structural Characterization and Molecular Size Study of Salt-Resistant Polymers

    by Guo-Wei Yuan, Chun-Ning Gao, Yong-Qiang Zhang, Wei-Liang Xiong, Jing-Hua Wang, Yang-Nan Shangguan, Li-Li Wang, Lei Liu

  • Study on Polymer Surface Binary Flooding System in Changqing Low Permeability Reservoir

    by Guo-Wei Yuan, Yong-Qiang Zhang, Jing-Hua Wang, Yang-Nan Shangguan, Xiao-Ju Huo, Xing-Mei Kang


  • Fine Injection-Production Adjustment Study on Binary Flooding for Changqing Low Permeability Reservoirs

    by Guo-Wei Yuan, Yang-Nan Shangguan, Yong-Hong Wang, Yuan-Yuan Lu, Yong-Qiang Zhang, Wei-Liang Xiong, Jin-Long Yang, Shu-Man Li