Kaan Can
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kaan Can has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Abdullah Başçi
Department of Electrical Engineering, Atatürk University
7 shared publications - Ferhan Karadabağ
Department of Electrical and Electronics Engineering, Ataturk University, 25240 Erzurum, Türkiye
3 shared publications - Kamil Orman
Department of Computer Engineering, Erzincan Binali Yıldırım University, Erzincan, Turkey
2 shared publications Adnan Derdiyok
1 shared publication- Erdal Akin
Department of Computer Science and Media Technology, Malmö University, 205 06 Malmö, Sweden
1 shared publication - Gökhan Yüksek
Department of Electrical and Electronics Engineering, Batman University, Batman 72100, Turkey
1 shared publication
Latest Publications
- 31 August 2026
- Published by Erzincan Universitesi Fen Bilimleri Ensitusu Dergisi in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 19 (2) , 483-501
Comparison of Optimization Methods for Temperature Control of a Heat Flow System
Bu çalışmada, zaman gecikmeli bir sistem olan Isı-Akış Sistemi (IAS) için lineer kontrolcü parametreleri 𝐾𝑝 ve 𝐾i değerleri çeşitli optimizasyon yöntemleri kullanılarak belirlenmiş ve sistemin sıcaklık kontrol performansı zamanla değişen referans sıcaklıklar altında test edilmiştir. İlk olarak IAS’nin matematiksel modeli elde edilmiştir. İkinci olarak; kontrolcü parametreleri sırasıyla Genetik Algoritma (GA), Arı Koloni Optimizasyonu (AKO), Karınca Koloni Optimizasyonu (KKO), Gri Kurt Optimizasyonu (GKO) ve Guguk Kuşu Optimizasyonu (GKO) yöntemleri ile optimize edilmiştir. Ayrıca bu yöntemlerle elde edilen 𝐾𝑝ve 𝐾i değerleri, klasik Ziegler-Nichols (Z-N) yöntemi ile bulunan parametrelerle kıyaslanmıştır. Simülasyonlar sonucunda, her bir yöntemin referans sıcaklık takip başarımı, ani referans değişimlerine karşı gösterdiği kontrolcü tepkisi, maksimum aşım, yükselme süresi ve yerleşme süresi gibi performans ölçütleri açısından değerlendirilmiştir. Bununla birlikte, her optimizasyon yöntemi için Ortalama Mutlak Hata (OMH) değeri hesaplanarak referans takip hatası sayısal olarak ortaya konmuştur. Elde edilen bulgular, GKO ile elde edilen kontrolcü parametrelerinin diğer yöntemlere kıyasla daha düşük hata ile referans sıcaklık takibi sağladığını göstermektedir.
- 31 August 2026
- Published by Erzincan Universitesi Fen Bilimleri Ensitusu Dergisi in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 19 (2) , 483-501
Comparison of Optimization Methods for Temperature Control of a Heat Flow System
Bu çalışmada, zaman gecikmeli bir sistem olan Isı-Akış Sistemi (IAS) için lineer kontrolcü parametreleri 𝐾𝑝 ve 𝐾i değerleri çeşitli optimizasyon yöntemleri kullanılarak belirlenmiş ve sistemin sıcaklık kontrol performansı zamanla değişen referans sıcaklıklar altında test edilmiştir. İlk olarak IAS’nin matematiksel modeli elde edilmiştir. İkinci olarak; kontrolcü parametreleri sırasıyla Genetik Algoritma (GA), Arı Koloni Optimizasyonu (AKO), Karınca Koloni Optimizasyonu (KKO), Gri Kurt Optimizasyonu (GKO) ve Guguk Kuşu Optimizasyonu (GKO) yöntemleri ile optimize edilmiştir. Ayrıca bu yöntemlerle elde edilen 𝐾𝑝ve 𝐾i değerleri, klasik Ziegler-Nichols (Z-N) yöntemi ile bulunan parametrelerle kıyaslanmıştır. Simülasyonlar sonucunda, her bir yöntemin referans sıcaklık takip başarımı, ani referans değişimlerine karşı gösterdiği kontrolcü tepkisi, maksimum aşım, yükselme süresi ve yerleşme süresi gibi performans ölçütleri açısından değerlendirilmiştir. Bununla birlikte, her optimizasyon yöntemi için Ortalama Mutlak Hata (OMH) değeri hesaplanarak referans takip hatası sayısal olarak ortaya konmuştur. Elde edilen bulgular, GKO ile elde edilen kontrolcü parametrelerinin diğer yöntemlere kıyasla daha düşük hata ile referans sıcaklık takibi sağladığını göstermektedir.
- Open Access
- 21 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 22836
Optimal control of a heat flow system via novel enhanced quadratic interpolation optimization tuned 2DOF-PID controller
This study addresses the optimal temperature regulation problem of a laboratory-scale heat flow system using a two-degree-of-freedom proportional–integral–derivative (2DOF-PID) controller tuned by a newly developed enhanced quadratic interpolation optimization (eQIO) algorithm. The main contribution lies in improving the original quadratic interpolation optimization (QIO) framework by integrating two lightweight enhancement mechanisms: a periodic parabolic local search to strengthen local exploitation and a stagnation-aware diversity recovery strategy to prevent premature convergence. The enhanced formulation preserves the deterministic interpolation-based structure of QIO while increasing convergence reliability and robustness without introducing additional algorithmic complexity. The effectiveness of eQIO is first evaluated on ten benchmark functions from the CEC-2019 test suite and compared with QIO, mountain gazelle optimization, tuned moss growth optimization, whale optimization algorithm, and superb fairy-wren optimization algorithm. Statistical results obtained from 500 independent runs indicate that eQIO consistently improves average solution quality and reduces standard deviation relative to QIO, while achieving competitive performance against population-based metaheuristic algorithms. Subsequently, eQIO is employed to tune the parameters of the 2DOF-PID controller for real-time temperature regulation experiments under step, square, and sinusoidal reference signals. The experimental results demonstrate reduced overshoot, lower steady-state error, improved tracking accuracy, and smoother control effort compared with alternative optimizer-based tuning approaches. Quantitatively, the proposed eQIO-based 2DOF-PID controller reduces the total mean absolute error (MAE) by 14.8% under step–square reference signals and by 45.8% under step–sinusoidal reference signals compared with the original QIO-based controller, while also providing smoother control action and improved tracking robustness. Overall, the proposed eQIO-driven 2DOF-PID framework establishes a computationally efficient and experimentally validated methodology for reliable thermal system control.
- 21 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 22836
Open AccessOptimal control of a heat flow system via novel enhanced quadratic interpolation optimization tuned 2DOF-PID controller
This study addresses the optimal temperature regulation problem of a laboratory-scale heat flow system using a two-degree-of-freedom proportional–integral–derivative (2DOF-PID) controller tuned by a newly developed enhanced quadratic interpolation optimization (eQIO) algorithm. The main contribution lies in improving the original quadratic interpolation optimization (QIO) framework by integrating two lightweight enhancement mechanisms: a periodic parabolic local search to strengthen local exploitation and a stagnation-aware diversity recovery strategy to prevent premature convergence. The enhanced formulation preserves the deterministic interpolation-based structure of QIO while increasing convergence reliability and robustness without introducing additional algorithmic complexity. The effectiveness of eQIO is first evaluated on ten benchmark functions from the CEC-2019 test suite and compared with QIO, mountain gazelle optimization, tuned moss growth optimization, whale optimization algorithm, and superb fairy-wren optimization algorithm. Statistical results obtained from 500 independent runs indicate that eQIO consistently improves average solution quality and reduces standard deviation relative to QIO, while achieving competitive performance against population-based metaheuristic algorithms. Subsequently, eQIO is employed to tune the parameters of the 2DOF-PID controller for real-time temperature regulation experiments under step, square, and sinusoidal reference signals. The experimental results demonstrate reduced overshoot, lower steady-state error, improved tracking accuracy, and smoother control effort compared with alternative optimizer-based tuning approaches. Quantitatively, the proposed eQIO-based 2DOF-PID controller reduces the total mean absolute error (MAE) by 14.8% under step–square reference signals and by 45.8% under step–sinusoidal reference signals compared with the original QIO-based controller, while also providing smoother control action and improved tracking robustness. Overall, the proposed eQIO-driven 2DOF-PID framework establishes a computationally efficient and experimentally validated methodology for reliable thermal system control.
- 19 March 2026
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 16 (2) , 972-987
Bir Grup İHA’nın Yumuşak Doyum Fonksiyonları ile Sınırlandırılmış İzleme Garantili Uyarlanabilir Kazanç Tabanlı Dağıtık Formasyon Kontrolü
Bu makalede, bir grup İnsansız Hava Aracının (İHA) zamanla değişen üç boyutlu bir yörünge boyunca kare formasyonda yörünge takibini gerçekleştirmesini sağlayan Yumuşak Doyum Fonksiyonu tabanlı Uyarlanabilir Dağıtık Formasyon (YDF-ADF) kontrol algoritması önerilmektedir. İlk olarak, dört rotorlu bir İHA’nın dinamik modeli ele alınmış ardından, İHA’ların ikinci mertebeden sistem modeli dikkate alınarak YDF-ADF kontrol algoritması tasarlanmıştır. Tasarlanan formasyon kontrol yaklaşımı dağıtık (distributed) bir yapıya sahip olup, İHA’lar arasında çift yönlü graf tabanlı karşılıklı bilgi paylaşımı yapıldığı varsayılmıştır. Geliştirilen adaptasyon kuralı, sürüde oluşan formasyon hata normunu esas alarak adaptif parametrelerin gerçek zamanlı güncellenmesini sağlamaktadır. Sistem dinamiklerinde ortaya çıkabilecek ani değişimlerin kontrol sinyaline olumsuz yansımaması ve adaptif parametre geçişlerinin daha kararlı ilerlemesi amacıyla, adaptasyon mekanizmasındaki parametre güncellemeleri yumuşak bir doyum (soft saturation) fonksiyonu ile ölçeklendirilmiştir. Ayrıca, önerilen YDF-ADF kontrol algoritmasının kararlılığı Lyapunov yöntemine dayalı olarak teorik olarak ispatlanmıştır. Dört adet İHA kullanılarak gerçekleştirilen simülasyon sonuçları heliks yörünge takibi sırasında İHA'ların ortalama konum hatasının 0.15 m'nin altında olduğunu, kare formasyon için de formasyon hatasının yaklaşık 0.1 m'de kaldığını göstermektedir. Dahası, yumuşak doygunluk mekanizmasının entegrasyonu sayesinde, adaptif kazanç parametresi %25 daha düşük maksimum türev davranışı sergileyerek kontrol girişindeki ani değişimleri etkili bir şekilde bastırdığı gözlemlenmiştir.
- 19 March 2026
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 16 (2) , 972-987
Bir Grup İHA’nın Yumuşak Doyum Fonksiyonları ile Sınırlandırılmış İzleme Garantili Uyarlanabilir Kazanç Tabanlı Dağıtık Formasyon Kontrolü
Bu makalede, bir grup İnsansız Hava Aracının (İHA) zamanla değişen üç boyutlu bir yörünge boyunca kare formasyonda yörünge takibini gerçekleştirmesini sağlayan Yumuşak Doyum Fonksiyonu tabanlı Uyarlanabilir Dağıtık Formasyon (YDF-ADF) kontrol algoritması önerilmektedir. İlk olarak, dört rotorlu bir İHA’nın dinamik modeli ele alınmış ardından, İHA’ların ikinci mertebeden sistem modeli dikkate alınarak YDF-ADF kontrol algoritması tasarlanmıştır. Tasarlanan formasyon kontrol yaklaşımı dağıtık (distributed) bir yapıya sahip olup, İHA’lar arasında çift yönlü graf tabanlı karşılıklı bilgi paylaşımı yapıldığı varsayılmıştır. Geliştirilen adaptasyon kuralı, sürüde oluşan formasyon hata normunu esas alarak adaptif parametrelerin gerçek zamanlı güncellenmesini sağlamaktadır. Sistem dinamiklerinde ortaya çıkabilecek ani değişimlerin kontrol sinyaline olumsuz yansımaması ve adaptif parametre geçişlerinin daha kararlı ilerlemesi amacıyla, adaptasyon mekanizmasındaki parametre güncellemeleri yumuşak bir doyum (soft saturation) fonksiyonu ile ölçeklendirilmiştir. Ayrıca, önerilen YDF-ADF kontrol algoritmasının kararlılığı Lyapunov yöntemine dayalı olarak teorik olarak ispatlanmıştır. Dört adet İHA kullanılarak gerçekleştirilen simülasyon sonuçları heliks yörünge takibi sırasında İHA'ların ortalama konum hatasının 0.15 m'nin altında olduğunu, kare formasyon için de formasyon hatasının yaklaşık 0.1 m'de kaldığını göstermektedir. Dahası, yumuşak doygunluk mekanizmasının entegrasyonu sayesinde, adaptif kazanç parametresi %25 daha düşük maksimum türev davranışı sergileyerek kontrol girişindeki ani değişimleri etkili bir şekilde bastırdığı gözlemlenmiştir.
- Open Access
- 29 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 363
Performance Comparison of Different Optimization Techniques for Temperature Control of a Heat-Flow System
Nowadays, optimization methods are widely used to adjust controller parameters and tune their optimal values in order to enhance the efficiency and performance of dynamic systems. In this study, the parameters of a linear Proportional–Integral (PI) controller were optimized by using five different optimization algorithms, such as Artificial Tree Algorithm (ATA), Particle Swarm Optimization (PSO), Differential Evolution Algorithm (DEA), Constrained Multi-Objective State Transition Algorithm (CMOSTA), and Adaptive Fire Forest Optimization (AFFO). The optimized controllers were implemented in real time for temperature control of a Heat-flow System (HFS) under various step and time-varying reference signals. In addition, the Ziegler–Nichols (Z–N) method was also applied to the system as a benchmark to compare the temperature tracking performance of the proposed optimization methods. To further evaluate the performance of each optimization algorithm, Mean Absolute Error (MAE) values were calculated, and improvement ratios were obtained. The experimental results showed that the proposed optimization methods provided more successful reference tracking and enhanced controller performance as well.
- 29 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 363
Open AccessPerformance Comparison of Different Optimization Techniques for Temperature Control of a Heat-Flow System
Nowadays, optimization methods are widely used to adjust controller parameters and tune their optimal values in order to enhance the efficiency and performance of dynamic systems. In this study, the parameters of a linear Proportional–Integral (PI) controller were optimized by using five different optimization algorithms, such as Artificial Tree Algorithm (ATA), Particle Swarm Optimization (PSO), Differential Evolution Algorithm (DEA), Constrained Multi-Objective State Transition Algorithm (CMOSTA), and Adaptive Fire Forest Optimization (AFFO). The optimized controllers were implemented in real time for temperature control of a Heat-flow System (HFS) under various step and time-varying reference signals. In addition, the Ziegler–Nichols (Z–N) method was also applied to the system as a benchmark to compare the temperature tracking performance of the proposed optimization methods. To further evaluate the performance of each optimization algorithm, Mean Absolute Error (MAE) values were calculated, and improvement ratios were obtained. The experimental results showed that the proposed optimization methods provided more successful reference tracking and enhanced controller performance as well.
- Open Access
- 28 November 2025
- Published by MDPI AG in Preprints.org
Performance Comparison of Different Optimization Techniques for Temperature Control of A Heat-Flow System
Nowadays, the optimization methods are widely used to adjust controller parameters to tune their optimal values in order to enhance the efficiency and performance of dynamic systems. In this study, the parameters of a linear PI controller were optimized by using five different optimization algorithms such as Artificial Tree Algorithm (ATA), Particle Swarm Optimization (PSO), Differential Evolution Algorithm (DEA), Constrained Multi-Objective State Transition Algorithm (CMOSTA), and Adaptive Fire Forest Optimization (AFFO). The optimized controllers were implemented in real time for temperature control of a Heat-Flow System (HFS) under various step and time-varying reference signals. In addition, the Ziegler–Nichols (Z-N) method was also applied to the system as a benchmark to compare the temperature tracking performance of the proposed optimization methods. To further evaluate the performance of each optimization algorithm, Mean Absolute Error (MAE) values were calculated and improvement ratios were obtained. The experimental results showed that the proposed optimization methods provided more successful reference tracking and enhanced controller performance as well.
- 28 November 2025
- Published by MDPI AG in Preprints.org
Open AccessPerformance Comparison of Different Optimization Techniques for Temperature Control of A Heat-Flow System
Nowadays, the optimization methods are widely used to adjust controller parameters to tune their optimal values in order to enhance the efficiency and performance of dynamic systems. In this study, the parameters of a linear PI controller were optimized by using five different optimization algorithms such as Artificial Tree Algorithm (ATA), Particle Swarm Optimization (PSO), Differential Evolution Algorithm (DEA), Constrained Multi-Objective State Transition Algorithm (CMOSTA), and Adaptive Fire Forest Optimization (AFFO). The optimized controllers were implemented in real time for temperature control of a Heat-Flow System (HFS) under various step and time-varying reference signals. In addition, the Ziegler–Nichols (Z-N) method was also applied to the system as a benchmark to compare the temperature tracking performance of the proposed optimization methods. To further evaluate the performance of each optimization algorithm, Mean Absolute Error (MAE) values were calculated and improvement ratios were obtained. The experimental results showed that the proposed optimization methods provided more successful reference tracking and enhanced controller performance as well.
- 23 November 2023
- Published by Springer Nature
- p. 137-146
Swarm Control of a Group of Unmanned Aerial Vehicle Under Fixed Consensus Topology
- 23 November 2023
- Published by Springer Nature
- p. 137-146
Swarm Control of a Group of Unmanned Aerial Vehicle Under Fixed Consensus Topology
- 18 October 2023
- Published by Springer Nature
- p. 221-227
Time-Varying Consensus Formation Control of a Group of Quadrotor System with Collision Avoidance
- 18 October 2023
- Published by Springer Nature
- p. 221-227
Time-Varying Consensus Formation Control of a Group of Quadrotor System with Collision Avoidance
- 1 June 2021
- Published by Igdir University in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 11 (2) , 1014-1026
PI+Feed Forward Controller Tuning Based on Genetic Algorithm for Liquid Level Control of Coupled-Tank System
One of the main problems in the control of the coupled tank liquid level systems, which are used frequently in water treatment systems and petrochemical industry today, is to determine the water flow rate between the two tanks. In this paper, proportional-integral +feed forward control method (PI+FF), whose parameters are determined using genetic algorithm (GA), one of the heuristic optimization methods, is used to solve this problem. In addition, in order to show the performance of the GA-based controller, the PI+FF controller that PI parameters obtained using the Ziegler-Nichols (Z-N) method are applied to the same system and the real-time application results of both controllers are compared. The experimental results showed that the controller, which parameters are determined by GA, reached the desired reference value with less settling time and less overshooting when it compared to the Z-N method based controller, and also it has given faster response to sudden changes in the system.
- 1 June 2021
- Published by Igdir University in Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 11 (2) , 1014-1026
PI+Feed Forward Controller Tuning Based on Genetic Algorithm for Liquid Level Control of Coupled-Tank System
One of the main problems in the control of the coupled tank liquid level systems, which are used frequently in water treatment systems and petrochemical industry today, is to determine the water flow rate between the two tanks. In this paper, proportional-integral +feed forward control method (PI+FF), whose parameters are determined using genetic algorithm (GA), one of the heuristic optimization methods, is used to solve this problem. In addition, in order to show the performance of the GA-based controller, the PI+FF controller that PI parameters obtained using the Ziegler-Nichols (Z-N) method are applied to the same system and the real-time application results of both controllers are compared. The experimental results showed that the controller, which parameters are determined by GA, reached the desired reference value with less settling time and less overshooting when it compared to the Z-N method based controller, and also it has given faster response to sudden changes in the system.
- 31 August 2020
- Published by Erzincan Universitesi Fen Bilimleri Ensitusu Dergisi in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 13 (2) , 828-838
Design, Simulation and Comparison of Controllers for Temperature Profile Tracking Control of a Heat Flow System
Bu makalede, ısı-akış sistemine uygulanan üç farklı kontrolcünün tasarımı, simülasyonu ve performans karşılaştırması sunulmuştur. İlk olarak, ısı-akış sisteminin dinamik modeli elde edilmiş ve devamında ısı kontrolünü gerçekleştirmek için kayan kipli kontrol (KKK), adaptif kayan kipli kontrol (AKKK) ve adaptif kesir dereceli kayan kipli kontrol (AKDKKK) yöntemleri tasarlanmış ve uygulanmıştır. Tasarlanan kontrolcülerin performansını analiz etmek için Matlab/Simulink programı aracılığıyla ısı–akış sisteminin simülasyonu oluşturulmuş ve tasarlanan kontrolcülerin performansı analiz edilmiştir. Simülasyon ortamından elde edilen referans sıcaklık takip hatası, adaptasyon kazancı, ani değişimlere karşı kontrolcünün tepkisi, maksimum aşım, yükselme ve yerleşme zamanı gibi sonuçlar sunulmuş ve elde edilen sonuçlardan AKDKKK’nün diğer kontrolcülere göre referans sıcaklığı daha az hata ile takip ettiği, daha düşük aşım, yükselme ve yerleşme zamanına sahip olduğu gözlemlenmiştir. Ayrıca, KKK uygulandığında en yüksek referans sıcaklık takip hatası, yükselme ve yerleşme zamanına sahip olduğu gözlemlenmiştir.
- 31 August 2020
- Published by Erzincan Universitesi Fen Bilimleri Ensitusu Dergisi in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 13 (2) , 828-838
Design, Simulation and Comparison of Controllers for Temperature Profile Tracking Control of a Heat Flow System
Bu makalede, ısı-akış sistemine uygulanan üç farklı kontrolcünün tasarımı, simülasyonu ve performans karşılaştırması sunulmuştur. İlk olarak, ısı-akış sisteminin dinamik modeli elde edilmiş ve devamında ısı kontrolünü gerçekleştirmek için kayan kipli kontrol (KKK), adaptif kayan kipli kontrol (AKKK) ve adaptif kesir dereceli kayan kipli kontrol (AKDKKK) yöntemleri tasarlanmış ve uygulanmıştır. Tasarlanan kontrolcülerin performansını analiz etmek için Matlab/Simulink programı aracılığıyla ısı–akış sisteminin simülasyonu oluşturulmuş ve tasarlanan kontrolcülerin performansı analiz edilmiştir. Simülasyon ortamından elde edilen referans sıcaklık takip hatası, adaptasyon kazancı, ani değişimlere karşı kontrolcünün tepkisi, maksimum aşım, yükselme ve yerleşme zamanı gibi sonuçlar sunulmuş ve elde edilen sonuçlardan AKDKKK’nün diğer kontrolcülere göre referans sıcaklığı daha az hata ile takip ettiği, daha düşük aşım, yükselme ve yerleşme zamanına sahip olduğu gözlemlenmiştir. Ayrıca, KKK uygulandığında en yüksek referans sıcaklık takip hatası, yükselme ve yerleşme zamanına sahip olduğu gözlemlenmiştir.
- 20 April 2018
- Published by Kaunas University of Technology (KTU) in Elektronika ir Elektrotechnika
- Vol. 24 (2) , 12-17
An Adaptive-Fuzzy Fractional-Order Sliding Mode Controller Design for an Unmanned Vehicle
In this paper, speed and direction angle of a four wheel skid-steered mobile robot (4 WD SSMR) has been controlled via adaptive-fuzzy fractional-order sliding mode controller (AFFOSMC) under different speed and angle reference signals. The hybrid control method is designed to combine all advantages that controllers have such as flexibility realized by fractional order calculation, robustness to disturbances and parameters variations provided by sliding mode controller (SMC) as well as adaptation of G constant of SMC via fuzzy controller, simultaneously. Also, a fractional-order SMC is applied to the system for the same reference speed and angle references to show the effects of the changes and adaptation of G constant. Experimental results show that the AFFOSMC has better trajectory tracking performance than the FOSMC.DOI: http://dx.doi.org/10.5755/j01.eie.24.2.20630
- 20 April 2018
- Published by Kaunas University of Technology (KTU) in Elektronika ir Elektrotechnika
- Vol. 24 (2) , 12-17
An Adaptive-Fuzzy Fractional-Order Sliding Mode Controller Design for an Unmanned Vehicle
In this paper, speed and direction angle of a four wheel skid-steered mobile robot (4 WD SSMR) has been controlled via adaptive-fuzzy fractional-order sliding mode controller (AFFOSMC) under different speed and angle reference signals. The hybrid control method is designed to combine all advantages that controllers have such as flexibility realized by fractional order calculation, robustness to disturbances and parameters variations provided by sliding mode controller (SMC) as well as adaptation of G constant of SMC via fuzzy controller, simultaneously. Also, a fractional-order SMC is applied to the system for the same reference speed and angle references to show the effects of the changes and adaptation of G constant. Experimental results show that the AFFOSMC has better trajectory tracking performance than the FOSMC.DOI: http://dx.doi.org/10.5755/j01.eie.24.2.20630