S. Banumathi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
S. Banumathi has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Karthikeyan Balasubramani
Affiliation Department of Robotics and Automation Engineering, PSG College of Technology, Coimbatore, Tamilnadu, India
2 shared publications - T. Rajamanikandan
Department of EEE, Kongunadu College of Engineering and Technology, Tiruchirappalli, India
2 shared publications - Hossam M. Zawbaa
Faculty of Computers and Artificial Intelligence, Beni-Suef University, Beni-Suef, Egypt
1 shared publication - J.
Department of Electrical and Electronics Engineering, M.Kumarasamy College of Engineering, Anna University, Karur, Tamilnadu
1 shared publication - K.
Department of Electrical and Electronics Engineering, M.Kumarasamy College of Engineering, Anna University, Karur, Tamilnadu
1 shared publication - Kiran Ramaswamy
Department of Electrical and Computer Engineering, Dambi Dollo University, Dambi Dollo, Ethiopia
1 shared publication
Latest Publications
- Open Access
- 1 August 2023
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (8) , 085501
Investigation of the dielectric properties and mechanical stability of lignocellulosic biomass based electrical insulation material for high voltage applications
The laminated insulation pressboards are used in electrical transformers and they are made from pure wood cellulose fibre. It is used in high-voltage transformers for electrical insulation due to its superior electrical and mechanical properties. Many researchers are searching for alternatives to wood raw materials to reduce deforestation. The banana is one of the lignocellulose-based raw materials; the banana fibre contains 48% cellulose. In this work, different frequencies and temperatures are used to investigate the electrical characteristics of epoxy resin composites reinforced with banana leaf fibres, including their dielectric constant, dissipation factor, and loss factor. At frequencies ranging from 1 to 10 kHz and temperatures ranging from 30 to 150 °C, the dielectric properties of several composites containing banana leaf fibre are studied. The composite’s dielectric properties gradually increased with temperature and decreased with frequency. Correspondingly, the mechanical tests involving a banana leaf fibre epoxy composite are conducted for tensile, bending, impact, and water absorption. The banana leaf fibre has been treated with a 5% sodium hydroxide (NaOH) solution to increase its dielectric and mechanical strength. According to this study, the mechanical strength of biocomposites containing up to 60% treated banana leaf fibre epoxy (TBLFE) composites is greater than that of pure epoxy. A thermogravimetric investigation of composites reinforced with banana fibres has revealed remarkable thermal stability up to 220 °C. In a composite made from chemically treated banana fibre pressboard, there is a good bond between the fibres and the matrix. The FESEM surface analysis shows that treated banana leaf fibril insulation boards have a better texture than composites that have not been treated. The testing results depict that banana leaf fibre is one of the good alternatives to wood cellulose for electrical insulation on pressboard for high-voltage applications.
- 1 August 2023
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (8) , 085501
Open AccessInvestigation of the dielectric properties and mechanical stability of lignocellulosic biomass based electrical insulation material for high voltage applications
The laminated insulation pressboards are used in electrical transformers and they are made from pure wood cellulose fibre. It is used in high-voltage transformers for electrical insulation due to its superior electrical and mechanical properties. Many researchers are searching for alternatives to wood raw materials to reduce deforestation. The banana is one of the lignocellulose-based raw materials; the banana fibre contains 48% cellulose. In this work, different frequencies and temperatures are used to investigate the electrical characteristics of epoxy resin composites reinforced with banana leaf fibres, including their dielectric constant, dissipation factor, and loss factor. At frequencies ranging from 1 to 10 kHz and temperatures ranging from 30 to 150 °C, the dielectric properties of several composites containing banana leaf fibre are studied. The composite’s dielectric properties gradually increased with temperature and decreased with frequency. Correspondingly, the mechanical tests involving a banana leaf fibre epoxy composite are conducted for tensile, bending, impact, and water absorption. The banana leaf fibre has been treated with a 5% sodium hydroxide (NaOH) solution to increase its dielectric and mechanical strength. According to this study, the mechanical strength of biocomposites containing up to 60% treated banana leaf fibre epoxy (TBLFE) composites is greater than that of pure epoxy. A thermogravimetric investigation of composites reinforced with banana fibres has revealed remarkable thermal stability up to 220 °C. In a composite made from chemically treated banana fibre pressboard, there is a good bond between the fibres and the matrix. The FESEM surface analysis shows that treated banana leaf fibril insulation boards have a better texture than composites that have not been treated. The testing results depict that banana leaf fibre is one of the good alternatives to wood cellulose for electrical insulation on pressboard for high-voltage applications.
- Open Access
- 29 November 2022
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 22, 865-878
Investigation of dielectric and mechanical properties of Lignocellulosic Rice Husk Fibril for high and medium voltage electrical insulation applications
- 29 November 2022
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 22, 865-878
Open AccessInvestigation of dielectric and mechanical properties of Lignocellulosic Rice Husk Fibril for high and medium voltage electrical insulation applications
- RetractedOpen Access
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
[Retracted] Investigation on Dielectric Properties of Press Board Coated with Epoxy Resin, Quartz, and Rice Husk Ash
Epoxy resin mixed with rice husk ash and quartz powder increases its dielectric strength. This paper presents the dielectric properties of the press board coated with this epoxy mixture. In this work, the press board, which is used in the transformer, is coated with three components: epoxy resin, rice husk ash, and quartz powder. The nanometer‐sized quartz powder and rice husk ash are mixed in the particular ratio with the epoxy resin. The mixture of epoxy resin, quartz powder, and rice husk ash is coated on both sides of the press board. The dielectric constant, volume resistivity, and Tan Delta (dissipation factor) of the coated press board are compared with the noncoated press board. The results reveal that the coated board is having high dielectric constant and volume resistivity when compared to the noncoated board.
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
RetractedOpen Access[Retracted] Investigation on Dielectric Properties of Press Board Coated with Epoxy Resin, Quartz, and Rice Husk Ash
Epoxy resin mixed with rice husk ash and quartz powder increases its dielectric strength. This paper presents the dielectric properties of the press board coated with this epoxy mixture. In this work, the press board, which is used in the transformer, is coated with three components: epoxy resin, rice husk ash, and quartz powder. The nanometer‐sized quartz powder and rice husk ash are mixed in the particular ratio with the epoxy resin. The mixture of epoxy resin, quartz powder, and rice husk ash is coated on both sides of the press board. The dielectric constant, volume resistivity, and Tan Delta (dissipation factor) of the coated press board are compared with the noncoated press board. The results reveal that the coated board is having high dielectric constant and volume resistivity when compared to the noncoated board.
- Open Access
- 1 August 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 906 (1) , 012008
Integrated Multi-Port Converter For Off - Grid Photovoltaic System
The multi-port converter proposed in this work is used for the integration of many converters in a single system. The system is the solar dc-dc standalone converter with the battery storage. The proposed integrated multiport converter consists of three separate converters they are, bidirectional PWM converter, switched capacitor converter, series resonant converter. The numbers of switches are reduced and thus the loss in the power electronics circuit is also reduced. A 300 watts prototype model of the system is implemented and the hardware results obtained is discussed and the same system is simulated using matlab software and the results are matched.
- 1 August 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 906 (1) , 012008
Open AccessIntegrated Multi-Port Converter For Off - Grid Photovoltaic System
The multi-port converter proposed in this work is used for the integration of many converters in a single system. The system is the solar dc-dc standalone converter with the battery storage. The proposed integrated multiport converter consists of three separate converters they are, bidirectional PWM converter, switched capacitor converter, series resonant converter. The numbers of switches are reduced and thus the loss in the power electronics circuit is also reduced. A 300 watts prototype model of the system is implemented and the hardware results obtained is discussed and the same system is simulated using matlab software and the results are matched.