Nianyao Chai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Nianyao Chai has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Xuewen Wang
Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 P. R. China
5 shared publications Xiangyu Chen
Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices, Wuhan University of Technology, Wuhan, 430070, P. R. China
3 shared publicationsYunfan Yue
Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices, Wuhan University of Technology, Wuhan, 430070, P. R. China
3 shared publications- Yi-Bing Cheng
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China
2 shared publications Zhongle Zeng
Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices, Wuhan University of Technology, Wuhan, 430070, P. R. China
2 shared publicationsChao Wang
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, PR China
1 shared publication
Latest Publications
- Open Access
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. PP (4) , 1
Tri-Mode Hybrid Dielectric Resonator Antenna Fabricated via Laser-Based Selective Material Processing for WLAN Applications
In this paper, a novel tri-mode hybrid dielectric resonator antenna (DRA) designed for wireless local area network (WLAN) applications is presented. Through a special DRA design, the antenna profile is compressed to 0.05 λ0. TEy 1+δ11 and TEy 2+δ11 modes of a complex, irregular dielectric resonator are merged to provide the coverage of WLAN 5.2/5.8-GHz bands, while a quarter-wavelength monopole mode of an F-shaped metal strip is excited for the WLAN 2.4-GHz band. Meanwhile, a hybrid fabrication method has been developed including stereolithography (SLA)-based ceramic 3D printing for irregular dielectric resonator fabrication and laser-based selective metal patterning to achieve high-precision integration of metal strip lines (< 20 μm accuracy). Measured and simulated results of reflection coefficients along with radiation patterns show good agreement. 6.87% and 23.16% bandwidth coverage have been achieved for WLAN 2.4-GHz and WLAN 5.2/5.8-GHz bands respectively.
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. PP (4) , 1
Open AccessTri-Mode Hybrid Dielectric Resonator Antenna Fabricated via Laser-Based Selective Material Processing for WLAN Applications
In this paper, a novel tri-mode hybrid dielectric resonator antenna (DRA) designed for wireless local area network (WLAN) applications is presented. Through a special DRA design, the antenna profile is compressed to 0.05 λ0. TEy 1+δ11 and TEy 2+δ11 modes of a complex, irregular dielectric resonator are merged to provide the coverage of WLAN 5.2/5.8-GHz bands, while a quarter-wavelength monopole mode of an F-shaped metal strip is excited for the WLAN 2.4-GHz band. Meanwhile, a hybrid fabrication method has been developed including stereolithography (SLA)-based ceramic 3D printing for irregular dielectric resonator fabrication and laser-based selective metal patterning to achieve high-precision integration of metal strip lines (< 20 μm accuracy). Measured and simulated results of reflection coefficients along with radiation patterns show good agreement. 6.87% and 23.16% bandwidth coverage have been achieved for WLAN 2.4-GHz and WLAN 5.2/5.8-GHz bands respectively.
- 17 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (33) , 13096-13103
Femtosecond laser annealing of fluorine-doped tin oxide films towards high-performance perovskite photovoltaics
Transparent conductive electrodes are important components of perovskite solar cells (PSCs), and their carrier transport capabilities directly affect the power conversion efficiency (PCE) of PSCs. Despite the excellent optical and electrical properties of commercialized fluorine-doped tin oxide (FTO), its poor wettability reduces the quality of the electron transporting layer (ETL) thin film, thereby affecting the charge carrier transfer efficiency in PSCs. To further optimize the performance of FTO films, we propose a femtosecond laser annealing (fs-LA) technique to successfully allow OH− ions to replace F− ions on the surface, thereby improving optoelectronic performance and enhancing surface hydrophilicity. These enhancements effectively decrease non-radiative recombination at the interface and enhance carrier transport capabilities. PSCs based on FTO films treated by the fs-LA technique achieve a PCE of 22.33%. This result provides a reference for the performance optimization of transparent conductive oxide (TCO) films.
- 17 July 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (33) , 13096-13103
Femtosecond laser annealing of fluorine-doped tin oxide films towards high-performance perovskite photovoltaics
Transparent conductive electrodes are important components of perovskite solar cells (PSCs), and their carrier transport capabilities directly affect the power conversion efficiency (PCE) of PSCs. Despite the excellent optical and electrical properties of commercialized fluorine-doped tin oxide (FTO), its poor wettability reduces the quality of the electron transporting layer (ETL) thin film, thereby affecting the charge carrier transfer efficiency in PSCs. To further optimize the performance of FTO films, we propose a femtosecond laser annealing (fs-LA) technique to successfully allow OH− ions to replace F− ions on the surface, thereby improving optoelectronic performance and enhancing surface hydrophilicity. These enhancements effectively decrease non-radiative recombination at the interface and enhance carrier transport capabilities. PSCs based on FTO films treated by the fs-LA technique achieve a PCE of 22.33%. This result provides a reference for the performance optimization of transparent conductive oxide (TCO) films.
- Open Access
- 8 January 2024
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 6 (2) , 025003
Isotropic sintering shrinkage of 3D glass-ceramic nanolattices: backbone preforming and mechanical enhancement
There is a perpetual pursuit for free-form glasses and ceramics featuring outstanding mechanical properties as well as chemical and thermal resistance. It is a promising idea to shape inorganic materials in three-dimensional (3D) forms to reduce their weight while maintaining high mechanical properties. A popular strategy for the preparation of 3D inorganic materials is to mold the organic–inorganic hybrid photoresists into 3D micro- and nano-structures and remove the organic components by subsequent sintering. However, due to the discrete arrangement of inorganic components in the organic-inorganic hybrid photoresists, it remains a huge challenge to attain isotropic shrinkage during sintering. Herein, we demonstrate the isotropic sintering shrinkage by forming the consecutive –Si–O–Si–O–Zr–O– inorganic backbone in photoresists and fabricating 3D glass–ceramic nanolattices with enhanced mechanical properties. The femtosecond (fs) laser is used in two-photon polymerization (TPP) to fabricate 3D green body structures. After subsequent sintering at 1000 °C, high-quality 3D glass–ceramic microstructures can be obtained with perfectly intact and smooth morphology. In-suit compression experiments and finite-element simulations reveal that octahedral-truss (oct-truss) lattices possess remarkable adeptness in bearing stress concentration and maintain the structural integrity to resist rod bending, indicating that this structure is a candidate for preparing lightweight and high stiffness glass–ceramic nanolattices. 3D printing of such glasses and ceramics has significant implications in a number of industrial applications, including metamaterials, microelectromechanical systems, photonic crystals, and damage-tolerant lightweight materials.
- 8 January 2024
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 6 (2) , 025003
Open AccessIsotropic sintering shrinkage of 3D glass-ceramic nanolattices: backbone preforming and mechanical enhancement
There is a perpetual pursuit for free-form glasses and ceramics featuring outstanding mechanical properties as well as chemical and thermal resistance. It is a promising idea to shape inorganic materials in three-dimensional (3D) forms to reduce their weight while maintaining high mechanical properties. A popular strategy for the preparation of 3D inorganic materials is to mold the organic–inorganic hybrid photoresists into 3D micro- and nano-structures and remove the organic components by subsequent sintering. However, due to the discrete arrangement of inorganic components in the organic-inorganic hybrid photoresists, it remains a huge challenge to attain isotropic shrinkage during sintering. Herein, we demonstrate the isotropic sintering shrinkage by forming the consecutive –Si–O–Si–O–Zr–O– inorganic backbone in photoresists and fabricating 3D glass–ceramic nanolattices with enhanced mechanical properties. The femtosecond (fs) laser is used in two-photon polymerization (TPP) to fabricate 3D green body structures. After subsequent sintering at 1000 °C, high-quality 3D glass–ceramic microstructures can be obtained with perfectly intact and smooth morphology. In-suit compression experiments and finite-element simulations reveal that octahedral-truss (oct-truss) lattices possess remarkable adeptness in bearing stress concentration and maintain the structural integrity to resist rod bending, indicating that this structure is a candidate for preparing lightweight and high stiffness glass–ceramic nanolattices. 3D printing of such glasses and ceramics has significant implications in a number of industrial applications, including metamaterials, microelectromechanical systems, photonic crystals, and damage-tolerant lightweight materials.
- Open Access
- 13 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (16) , 2782
Passive Deicing CFRP Surfaces Enabled by Super-Hydrophobic Multi-Scale Micro-Nano Structures Fabricated via Femtosecond Laser Direct Writing
Carbon fiber reinforced plastic (CFRP) is the main material of aircraft skin. Preparing superhydrophobic anti-icing/deicing surface on the CFRP is of great importance for aircraft flight safety. In this work, a variety of multi-scale micro-nano structures were imprinted on CFRP by femtosecond laser processing, and a transition from hydrophilic to superhydrophobic CFRP was realized. After being optimized by different geometries and laser conditions, the water contact angle, which is tested at 24.3 °C and 34% humidity, increased from 88 ± 2° (pristine) to 149 ± 3° (100 μm groove) and 153 ± 3° (80 μm grid). A further anti-icing test at −10 °C (measured on the cooling platform) and 28% humidity showed that the freezing time was increased from 78 ± 10 s (pristine) to 282 ± 25 s (80 μm grid). Most importantly, the tensile tests showed that the femtosecond laser processing method did not deteriorate the mechanical properties of CFRP. This work provides great significance for aircraft passive deicing technology.
- 13 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (16) , 2782
Open AccessPassive Deicing CFRP Surfaces Enabled by Super-Hydrophobic Multi-Scale Micro-Nano Structures Fabricated via Femtosecond Laser Direct Writing
Carbon fiber reinforced plastic (CFRP) is the main material of aircraft skin. Preparing superhydrophobic anti-icing/deicing surface on the CFRP is of great importance for aircraft flight safety. In this work, a variety of multi-scale micro-nano structures were imprinted on CFRP by femtosecond laser processing, and a transition from hydrophilic to superhydrophobic CFRP was realized. After being optimized by different geometries and laser conditions, the water contact angle, which is tested at 24.3 °C and 34% humidity, increased from 88 ± 2° (pristine) to 149 ± 3° (100 μm groove) and 153 ± 3° (80 μm grid). A further anti-icing test at −10 °C (measured on the cooling platform) and 28% humidity showed that the freezing time was increased from 78 ± 10 s (pristine) to 282 ± 25 s (80 μm grid). Most importantly, the tensile tests showed that the femtosecond laser processing method did not deteriorate the mechanical properties of CFRP. This work provides great significance for aircraft passive deicing technology.
- Open Access
- 10 February 2022
- Published by Wiley in Nanophotonics
- Vol. 11 (5) , 987-993
Nonthermal laser ablation of high‐efficiency semitransparent and aesthetic perovskite solar cells
Perovskite solar cells (PSC) offer a promising solution for building integrated photovoltaics (BIPVs) due to its high photoelectric conversion efficiency (PCE). However, increasing the transparency of their functional layers dramatically decreases the PCE. Here, a computer controlled laser patterning method was proposed to directly turn PSC modules into semitransparent and with aesthetic artificial pattern, without additional complexities to the conventional PSCs fabrication process. A structured ST‐PSC achieving a champion PCE of 17.5% with average visible transparency (AVT) of 18.2%, and a mini‐module with 5 × 5 cm 2 delivering a PCE of 9.1% with AVT of 37.7% were demonstrated. Rationally designed aesthetic patterns were imprinted on mini‐modules, achieving a PCE of 14.4%. These results reveal a new route for low‐cost facile fabricating high performance large‐area aesthetic BIPV modules, and represent a big step forward toward the fabrication of solar cells with high efficiency and high transparency.
- 10 February 2022
- Published by Wiley in Nanophotonics
- Vol. 11 (5) , 987-993
Open AccessNonthermal laser ablation of high‐efficiency semitransparent and aesthetic perovskite solar cells
Perovskite solar cells (PSC) offer a promising solution for building integrated photovoltaics (BIPVs) due to its high photoelectric conversion efficiency (PCE). However, increasing the transparency of their functional layers dramatically decreases the PCE. Here, a computer controlled laser patterning method was proposed to directly turn PSC modules into semitransparent and with aesthetic artificial pattern, without additional complexities to the conventional PSCs fabrication process. A structured ST‐PSC achieving a champion PCE of 17.5% with average visible transparency (AVT) of 18.2%, and a mini‐module with 5 × 5 cm 2 delivering a PCE of 9.1% with AVT of 37.7% were demonstrated. Rationally designed aesthetic patterns were imprinted on mini‐modules, achieving a PCE of 14.4%. These results reveal a new route for low‐cost facile fabricating high performance large‐area aesthetic BIPV modules, and represent a big step forward toward the fabrication of solar cells with high efficiency and high transparency.
- Top Cited Papers
- 18 June 2021
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 372 (6548) , 1327-1332
Lead halide–templated crystallization of methylamine-free perovskite for efficient photovoltaic modules
Suppressing nucleation over large areas: Although formamidinium-based lead iodide (PbI 2 ) perovskites have a favorable bandgap and good thermal stability, the difficulty in controlling nucleation makes it difficult to grow high-quality, large-area films compared with methylammonium counterparts. Bu et al. show that adding N -methyl-2-pyrrolidone to the perovskite precursors forms an adduct with PbI 2 that promotes the formation of the desired black α-phase at room temperature. The addition of potassium hexafluorophosphate eliminated hysteresis by passivating interfacial defects and promoted long-term thermal stability at 85°C in unencapsulated devices. Large-area modules (17 square centimeters) achieved power conversion efficiencies of 20.4%. Science , abh1035, this issue p. 1327
- 18 June 2021
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 372 (6548) , 1327-1332
Top Cited PapersLead halide–templated crystallization of methylamine-free perovskite for efficient photovoltaic modules
Suppressing nucleation over large areas: Although formamidinium-based lead iodide (PbI 2 ) perovskites have a favorable bandgap and good thermal stability, the difficulty in controlling nucleation makes it difficult to grow high-quality, large-area films compared with methylammonium counterparts. Bu et al. show that adding N -methyl-2-pyrrolidone to the perovskite precursors forms an adduct with PbI 2 that promotes the formation of the desired black α-phase at room temperature. The addition of potassium hexafluorophosphate eliminated hysteresis by passivating interfacial defects and promoted long-term thermal stability at 85°C in unencapsulated devices. Large-area modules (17 square centimeters) achieved power conversion efficiencies of 20.4%. Science , abh1035, this issue p. 1327
- Open Access
- 8 January 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 128
Fiber Optical Hydrogen Sensor Based on WO3-Pd2Pt-Pt Nanocomposite Films
In this paper, WO3-Pd2Pt-Pt nanocomposite films were deposited on a single mode fiber as the hydrogen sensing material, which changes its reflectivity under different hydrogen concentration. The reflectivity variation was probed and converted to an electric signal by a pair of balanced InGaAs photoelectric detectors. In addition, the performance of the WO3-Pd2Pt-Pt composite film was investigated under different optical powers, and the irrigating power was optimized at 5 mW. With the irrigation of this optical power, the hydrogen sensitive film exhibits quick response toward 100 ppm hydrogen in air atmosphere at a room temperature of 25 °C. The experimental results demonstrate a high resolution at 5 parts per million (ppm) within a wide range from 100 to 5000 ppm in air. This simple and compact sensing system can detect hydrogen concentrations far below the explosion limit and provide early alert for hydrogen leakage, showing great potential in hydrogen-related applications.
- 8 January 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 128
Open AccessFiber Optical Hydrogen Sensor Based on WO3-Pd2Pt-Pt Nanocomposite Films
In this paper, WO3-Pd2Pt-Pt nanocomposite films were deposited on a single mode fiber as the hydrogen sensing material, which changes its reflectivity under different hydrogen concentration. The reflectivity variation was probed and converted to an electric signal by a pair of balanced InGaAs photoelectric detectors. In addition, the performance of the WO3-Pd2Pt-Pt composite film was investigated under different optical powers, and the irrigating power was optimized at 5 mW. With the irrigation of this optical power, the hydrogen sensitive film exhibits quick response toward 100 ppm hydrogen in air atmosphere at a room temperature of 25 °C. The experimental results demonstrate a high resolution at 5 parts per million (ppm) within a wide range from 100 to 5000 ppm in air. This simple and compact sensing system can detect hydrogen concentrations far below the explosion limit and provide early alert for hydrogen leakage, showing great potential in hydrogen-related applications.