Th. Stockmeier
Research Subjects
Th. Stockmeier has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
F. Bauer
ABB Corporate Research
9 shared publicationsW. Fichtner
9 shared publicationsH. Dettmer
8 shared publicationsH. Lendenmann
6 shared publicationsP. Brüesch
ABB Corporate Research, CH-5405 Baden-Dättwil, Switzerland
5 shared publicationsF. Stucki
ABB Corporate Research, CH-5405 Baden-Dättwil, Switzerland
4 shared publications
Latest Publications
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Integrated power electronic solutions for renewable energy utilization
Different Power Electronic Solutions ranging from 500 kW up to 6 MW comprising power semiconductor devices, DC link capacitors, heatsink, and gate & sense electronics are discussed incorporating new device and packaging technologies, such as SKiiP and SKiN packaging technology, and topologies such as 3-level or even multi-level to cover the wide power range. The design of these Solutions will be reviewed under particular consideration of specific renewable energy requirements, such as reliability, durability and environmental conditions. It can be concluded that rack mountable power semiconductor Solutions can exhibit very high power densities and can provide an effective way to build solar or wind power systems from standardized components.
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Integrated power electronic solutions for renewable energy utilization
Different Power Electronic Solutions ranging from 500 kW up to 6 MW comprising power semiconductor devices, DC link capacitors, heatsink, and gate & sense electronics are discussed incorporating new device and packaging technologies, such as SKiiP and SKiN packaging technology, and topologies such as 3-level or even multi-level to cover the wide power range. The design of these Solutions will be reviewed under particular consideration of specific renewable energy requirements, such as reliability, durability and environmental conditions. It can be concluded that rack mountable power semiconductor Solutions can exhibit very high power densities and can provide an effective way to build solar or wind power systems from standardized components.
- 1 May 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 324-327
SKiN: Double side sintering technology for new packages
SKiN technology comprises the sintering of power chips to a substrate (i.e. DBC), a top side sintering of the power chips to a flexible circuit board, and the sintering of the substrate to a pin-fin heat sink. The resulting power device has a very low volume and weight and demonstrates unprecedented thermal, electrical, and reliability performance. Therefore, this technology is ideally suited to provide better power electronic solutions for a range of applications, i.e. electric vehicles, renewable energies and variable speed motor drives. The process to manufacture a 400 Amp, 600 V Dual IGBT, sintered to an aluminum pin-fin heat sink will be described in detail and electrical, thermal and reliability results will be shown.
- 1 May 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 324-327
SKiN: Double side sintering technology for new packages
SKiN technology comprises the sintering of power chips to a substrate (i.e. DBC), a top side sintering of the power chips to a flexible circuit board, and the sintering of the substrate to a pin-fin heat sink. The resulting power device has a very low volume and weight and demonstrates unprecedented thermal, electrical, and reliability performance. Therefore, this technology is ideally suited to provide better power electronic solutions for a range of applications, i.e. electric vehicles, renewable energies and variable speed motor drives. The process to manufacture a 400 Amp, 600 V Dual IGBT, sintered to an aluminum pin-fin heat sink will be described in detail and electrical, thermal and reliability results will be shown.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 12-19
From Packaging to "Un"-Packaging - Trends in Power Semiconductor Modules
Power semiconductor modules play a key role in power electronic systems. Their inherent advantage of integrating different power chips, circuits and sense, drive and protection functions into one sub-system with electrically insulated cooling has lead to a wide range of products, being different in size, power and function. This paper will provide an overview of today's power modules and packaging and interconnect technologies. Trends towards next generations of power modules will be highlighted. In the growing market of hybrid and electrical vehicles, products are emerging where power modules are "un-packaged" to arrive at highly integrated, compact sub-systems which are better suited for the harsh environmental conditions and the required power density than the classical power modules.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 12-19
From Packaging to "Un"-Packaging - Trends in Power Semiconductor Modules
Power semiconductor modules play a key role in power electronic systems. Their inherent advantage of integrating different power chips, circuits and sense, drive and protection functions into one sub-system with electrically insulated cooling has lead to a wide range of products, being different in size, power and function. This paper will provide an overview of today's power modules and packaging and interconnect technologies. Trends towards next generations of power modules will be highlighted. In the growing market of hybrid and electrical vehicles, products are emerging where power modules are "un-packaged" to arrive at highly integrated, compact sub-systems which are better suited for the harsh environmental conditions and the required power density than the classical power modules.
- 25 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 22-27
Static and dynamic characteristics of high voltage ( 3.5 kV ) IGBT and MCT devices
- 25 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 22-27
Static and dynamic characteristics of high voltage ( 3.5 kV ) IGBT and MCT devices
- 24 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-239
Novel planar junction termination technique for high voltage power devices
- 24 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-239
Novel planar junction termination technique for high voltage power devices
- 24 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
The FiBs, a new high voltage BiMOS switch
- 24 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
The FiBs, a new high voltage BiMOS switch
- 1 January 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 343-346
Novel high power semiconductor module for trench IGBTs
A new high power IGBT module is presented here, which is particularly suited for devices with low forward voltage drop, such as the latest trench IGBTs. The module design is versatile to cover a power range from 190 A to 1000 A, to enable integrated drive and protection functions, and to address different circuit topologies. Its unique construction features are spring pins to the gate and emitter of each individual IGBT chip, the elimination of wire bonding to power terminals, and scalable subunits. This results in lower losses, better cooling, and optimized parallelling of chips and modules.
- 1 January 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 343-346
Novel high power semiconductor module for trench IGBTs
A new high power IGBT module is presented here, which is particularly suited for devices with low forward voltage drop, such as the latest trench IGBTs. The module design is versatile to cover a power range from 190 A to 1000 A, to enable integrated drive and protection functions, and to address different circuit topologies. Its unique construction features are spring pins to the gate and emitter of each individual IGBT chip, the elimination of wire bonding to power terminals, and scalable subunits. This results in lower losses, better cooling, and optimized parallelling of chips and modules.
- 30 December 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 54-59
A comparison of the switching behavior of IGBT and MCT power devices
- 30 December 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 54-59
A comparison of the switching behavior of IGBT and MCT power devices
- 30 December 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 95-100
Gate insulation yield loss due to lattice misfit stress in MCT and IGBT devices
An attempt was made to simplify the processing of MCT (MOS controlled thyristor) and IGBT (insulated-gate bipolar transistor) devices by combining the anneal of the p/sup +/-emitter with the gate oxidation process. A high-dose boron implantation prior to the gate oxidation is found to be responsible for significantly reduced breakdown field strengths observed for gate oxides in the MCT and IGBT devices. A failure mechanism based on lattice misfit stress and implantation damage below the amorphization threshold is proposed, which explains the observation that breakdown events occur exclusively at the very periphery of the implanted regions. This is in accordance with the scaling law that is found, exhibiting a logarithmic relationship between the breakdown strength of MOS capacitors and the perimeter length of p/sup +/ regions in the substrate. The substantial reduction in breakdown field strength was found to result in yield losses. By appropriate separate annealing of the p/sup +/-emitter, such weak spots in the gate oxide are not observed. With the use of BF/sub 2//sup +/ for the p/sup +/-emitter implantation it was possible to prevent yield losses and to reach intrinsic breakdown field strengths while still staying with the simplified device processing.
- 30 December 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10636854,p. 95-100
Gate insulation yield loss due to lattice misfit stress in MCT and IGBT devices
An attempt was made to simplify the processing of MCT (MOS controlled thyristor) and IGBT (insulated-gate bipolar transistor) devices by combining the anneal of the p/sup +/-emitter with the gate oxidation process. A high-dose boron implantation prior to the gate oxidation is found to be responsible for significantly reduced breakdown field strengths observed for gate oxides in the MCT and IGBT devices. A failure mechanism based on lattice misfit stress and implantation damage below the amorphization threshold is proposed, which explains the observation that breakdown events occur exclusively at the very periphery of the implanted regions. This is in accordance with the scaling law that is found, exhibiting a logarithmic relationship between the breakdown strength of MOS capacitors and the perimeter length of p/sup +/ regions in the substrate. The substantial reduction in breakdown field strength was found to result in yield losses. By appropriate separate annealing of the p/sup +/-emitter, such weak spots in the gate oxide are not observed. With the use of BF/sub 2//sup +/ for the p/sup +/-emitter implantation it was possible to prevent yield losses and to reach intrinsic breakdown field strengths while still staying with the simplified device processing.