Chintan Timsina
Research Subjects
Chintan Timsina has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Laurent Bollinger
CEA, DAM, DIF, F-91297 Arpajon, France
4 shared publications Mukunda Bhattarai
National Earthquake Monitoring and Research Centre, Department of Mines and Geology, Kathmandu, Nepal
4 shared publications- Ratna Mani Gupta
Department of Mines and Geology, National Earthquake Monitoring and Research Centre , 44600 Kathmandu , Nepal
3 shared publications B.P. Koirala
2 shared publicationsK. Maharjan
2 shared publicationsL.B. Adhikari
2 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by McGill University Library and Archives in Seismica
- Vol. 5 (2)
Tsangbu Ri slope failure triggers massive flash flood across the Himalaya and shakes the globe – the seismic observations
On 26 August 2026, a massive slope failure in the Himalaya caused a destructive flash-flood all along the Trishuli River. Here we report the first complete set of related seismic observations from Nepal and China. Using first-arrivals of high-frequency waveforms, we localize the main mass-movement and a nearby M2.5 seismic event shortly preceding it. The flash-flood increased seismic noise levels, persisting for hours. We report global seismic detections of the main event. Ultimately, we argue that a regional seismic monitoring network coupled with a signal detection and classification system would provide an early warning tool for future high-risk events.
- 2 July 2026
- Published by McGill University Library and Archives in Seismica
- Vol. 5 (2)
Open AccessTsangbu Ri slope failure triggers massive flash flood across the Himalaya and shakes the globe – the seismic observations
On 26 August 2026, a massive slope failure in the Himalaya caused a destructive flash-flood all along the Trishuli River. Here we report the first complete set of related seismic observations from Nepal and China. Using first-arrivals of high-frequency waveforms, we localize the main mass-movement and a nearby M2.5 seismic event shortly preceding it. The flash-flood increased seismic noise levels, persisting for hours. We report global seismic detections of the main event. Ultimately, we argue that a regional seismic monitoring network coupled with a signal detection and classification system would provide an early warning tool for future high-risk events.
- Open Access
- 8 August 2025
- Published by Springer Nature in Earth, Planets and Space
- Vol. 77 (1) , 1-12
Improved 3D velocity model for determining aftershock locations of the 2015 Gorkha, Nepal Earthquake
The 2015 Mw 7.9 Gorkha earthquake in Nepal and its subsequent aftershock sequence, including the Mw 7.2 Kodari earthquake, which occurred on the eastern edge of the Gorkha mainshock, significantly impacted the region. Accurate aftershock locations are crucial for understanding the Main Himalayan Thrust (MHT) structure and regional seismic hazards. This study presents an improved 3D velocity model derived through tomographic inversion using data from the NAMASTE network, comprising 42 seismic stations that recorded aftershocks from June 2015 to May 2016. An initial 1D velocity model was refined into 2D and 3D models using a stepwise inversion approach, ensuring robust resolution in the region. The resulting velocity structure reveals distinct high-velocity zones corresponding to the mainshock slip region and low-velocity zones near the Kodari aftershock. The improved model provided better depth accuracy for relocated aftershocks, with most events clustering within 5 km of the MHT, improving consistency with known geological structures. The results highlight two seismic belts along the MHT: a northern belt near the downdip extent of interseismic coupling and a southern belt concentrated in distinct clusters outside the rupture area. This enhanced 3D velocity model clarifies the spatial relationship between aftershock distribution and the MHT, improving our understanding of seismic behavior in the Nepal Himalaya and supporting improved seismic hazard assessments. Graphical Abstract
- 8 August 2025
- Published by Springer Nature in Earth, Planets and Space
- Vol. 77 (1) , 1-12
Open AccessImproved 3D velocity model for determining aftershock locations of the 2015 Gorkha, Nepal Earthquake
The 2015 Mw 7.9 Gorkha earthquake in Nepal and its subsequent aftershock sequence, including the Mw 7.2 Kodari earthquake, which occurred on the eastern edge of the Gorkha mainshock, significantly impacted the region. Accurate aftershock locations are crucial for understanding the Main Himalayan Thrust (MHT) structure and regional seismic hazards. This study presents an improved 3D velocity model derived through tomographic inversion using data from the NAMASTE network, comprising 42 seismic stations that recorded aftershocks from June 2015 to May 2016. An initial 1D velocity model was refined into 2D and 3D models using a stepwise inversion approach, ensuring robust resolution in the region. The resulting velocity structure reveals distinct high-velocity zones corresponding to the mainshock slip region and low-velocity zones near the Kodari aftershock. The improved model provided better depth accuracy for relocated aftershocks, with most events clustering within 5 km of the MHT, improving consistency with known geological structures. The results highlight two seismic belts along the MHT: a northern belt near the downdip extent of interseismic coupling and a southern belt concentrated in distinct clusters outside the rupture area. This enhanced 3D velocity model clarifies the spatial relationship between aftershock distribution and the MHT, improving our understanding of seismic behavior in the Nepal Himalaya and supporting improved seismic hazard assessments. Graphical Abstract
- Open Access
- 13 May 2024
- Published by Springer Nature in Earth, Planets and Space
- Vol. 76 (1) , 1-12
Examination of shallow and deep S-wave velocity structures from microtremor array measurements and receiver function analysis at strong-motion stations in Kathmandu basin, Nepal
The Himalayan collision zone, where the Indian Plate subducts beneath the Eurasian Plate at a low angle, has caused many devastating earthquakes. The Kathmandu basin, situated in this region, is surrounded by mountains on all sides and is filled with distinct soft lake sediments with a highly undulating bedrock topography. The basin has been experiencing rapid urbanization, and the growing population in its major cities has increased the vulnerability to seismic risk during future earthquakes. Several strong-motion stations have recently been deployed in the Kathmandu basin. It is expected that the data captured by this strong-motion station array will further enhance our understanding of site amplification in sedimentary basins. Clear P-to-S converted waves have been observed in the strong-motion records. In this study, we investigate the medium boundary that generated these converted waves. First, we estimate the shallow velocity structures, which correspond to the topographic slopes or surface geology, beneath the strong-motion stations. We then apply a receiver function analysis to the strong-motion records. The receiver function indicates that the interface between the soft sediment and seismic bedrock serves as a boundary that generates converted waves. The obtained results can be used for tuning three-dimensional velocity structures. Graphical Abstract
- 13 May 2024
- Published by Springer Nature in Earth, Planets and Space
- Vol. 76 (1) , 1-12
Open AccessExamination of shallow and deep S-wave velocity structures from microtremor array measurements and receiver function analysis at strong-motion stations in Kathmandu basin, Nepal
The Himalayan collision zone, where the Indian Plate subducts beneath the Eurasian Plate at a low angle, has caused many devastating earthquakes. The Kathmandu basin, situated in this region, is surrounded by mountains on all sides and is filled with distinct soft lake sediments with a highly undulating bedrock topography. The basin has been experiencing rapid urbanization, and the growing population in its major cities has increased the vulnerability to seismic risk during future earthquakes. Several strong-motion stations have recently been deployed in the Kathmandu basin. It is expected that the data captured by this strong-motion station array will further enhance our understanding of site amplification in sedimentary basins. Clear P-to-S converted waves have been observed in the strong-motion records. In this study, we investigate the medium boundary that generated these converted waves. First, we estimate the shallow velocity structures, which correspond to the topographic slopes or surface geology, beneath the strong-motion stations. We then apply a receiver function analysis to the strong-motion records. The receiver function indicates that the interface between the soft sediment and seismic bedrock serves as a boundary that generates converted waves. The obtained results can be used for tuning three-dimensional velocity structures. Graphical Abstract
- 29 April 2019
- Published by Society of Exploration Geophysicists
- Vol. 1, 456-458
Estimation of the shallow velocity structure using surface wave method in the Kathmandu Valley, Nepal
The Kathmandu Valley in Nepal is filled with soft lake sediment of Plio-Pleistocene origin. Hence, the capital Kathmandu city has been damaged not only by near field earthquakes but also far field earthquakes in the past. On 25 April 2015, the Gorkha earthquake (Mw 7.8) occurred in the Himalayan Range of Nepal. Major damage occurred not only in Nepal, but also in neighboring countries. In order to construct the source and velocity structure models for the ground motion prediction, the strong motion observation network was initiated with ten strong ground motion seismometers in the Kathmandu Valley by SATREPS program of JST/JICA (2016-2021, Principal Investigator: Kazuki Koketsu). We conducted the surface waves method with active source around all installation sites to estimate near surface S-wave velocity structures. First, we used frequency-wavenumber analysis for the recorded waves by surface wave method, and detected Rayleigh wave phase velocity. In addition, using these phase velocities, S-wave velocities are inverted for each sites. The S-wave velocities of sedimentary valley sites are 120-260 m/s. Especially, low S-wave velocity layer is thick at Balaju, a heavily damaged area during the 2015 Gorkha Nepal earthquake. The S-wave velocity is 200 m/s at depth of 10 m. These S-wave velocities are consistent with the geological formations.
- 29 April 2019
- Published by Society of Exploration Geophysicists
- Vol. 1, 456-458
Estimation of the shallow velocity structure using surface wave method in the Kathmandu Valley, Nepal
The Kathmandu Valley in Nepal is filled with soft lake sediment of Plio-Pleistocene origin. Hence, the capital Kathmandu city has been damaged not only by near field earthquakes but also far field earthquakes in the past. On 25 April 2015, the Gorkha earthquake (Mw 7.8) occurred in the Himalayan Range of Nepal. Major damage occurred not only in Nepal, but also in neighboring countries. In order to construct the source and velocity structure models for the ground motion prediction, the strong motion observation network was initiated with ten strong ground motion seismometers in the Kathmandu Valley by SATREPS program of JST/JICA (2016-2021, Principal Investigator: Kazuki Koketsu). We conducted the surface waves method with active source around all installation sites to estimate near surface S-wave velocity structures. First, we used frequency-wavenumber analysis for the recorded waves by surface wave method, and detected Rayleigh wave phase velocity. In addition, using these phase velocities, S-wave velocities are inverted for each sites. The S-wave velocities of sedimentary valley sites are 120-260 m/s. Especially, low S-wave velocity layer is thick at Balaju, a heavily damaged area during the 2015 Gorkha Nepal earthquake. The S-wave velocity is 200 m/s at depth of 10 m. These S-wave velocities are consistent with the geological formations.
- 29 April 2019
- Published by Society of Exploration Geophysicists
- Vol. 1, 264-267
Deep Exploration using Ambient Noise in Kathmandu Valley, Nepal - with an emphasis on CCA method using irregular shape Array
A significant amplification of long period seismic waves was detected in Kathmandu Valley, Nepal during the 2015 Gorkha earthquake. We have conducted microtremor (Ambient Noise) array measurement using broadband seismographs to explore the deep sedimentary layers at the central part of the valley in the framework of Science and Technology Research Partnership for Sustainable Development (SATREPS). The applied methods are the Spatial AutoCorrelation Method (SPAC) of equilateral triangular arrays, the 2ST-SPAC of irregular shape arrays and the Centerless Circular Array method (CCA) with equilateral and scalene triangle arrays. To grasp the shear wave velocity of the most surficial layer the existing data of the L-shape SPAC (LSSPAC) using 4.5 Hz geophones were analyzed. Supplementary measurements using them were done, too. A good consistency was confirmed for the results of analysis of SPAC and CCA in the low-frequency range. Particularly for two of these three sites the dispersion curves determined by 2ST-SPAC have a winding part in the frequency range between 0.25 Hz to 0.35 Hz, where clear peaks are observed both in the power spectra and in the horizontal to vertical spectral ratio. This winding part is due to the sags of the coherence functions, of which value at the bottom of the deepest sag reaches to -0.637 and suggests the disturbance, not by stochastic noise but coherent ones. This disturbance was suppressed when CCA was applied, but detectable. Then, we obtained broadband dispersion curves from 0.2 Hz to the frequency higher than 5 Hz at three sites and to 20 Hz in two of them where various methods were applied intensively.
- 29 April 2019
- Published by Society of Exploration Geophysicists
- Vol. 1, 264-267
Deep Exploration using Ambient Noise in Kathmandu Valley, Nepal - with an emphasis on CCA method using irregular shape Array
A significant amplification of long period seismic waves was detected in Kathmandu Valley, Nepal during the 2015 Gorkha earthquake. We have conducted microtremor (Ambient Noise) array measurement using broadband seismographs to explore the deep sedimentary layers at the central part of the valley in the framework of Science and Technology Research Partnership for Sustainable Development (SATREPS). The applied methods are the Spatial AutoCorrelation Method (SPAC) of equilateral triangular arrays, the 2ST-SPAC of irregular shape arrays and the Centerless Circular Array method (CCA) with equilateral and scalene triangle arrays. To grasp the shear wave velocity of the most surficial layer the existing data of the L-shape SPAC (LSSPAC) using 4.5 Hz geophones were analyzed. Supplementary measurements using them were done, too. A good consistency was confirmed for the results of analysis of SPAC and CCA in the low-frequency range. Particularly for two of these three sites the dispersion curves determined by 2ST-SPAC have a winding part in the frequency range between 0.25 Hz to 0.35 Hz, where clear peaks are observed both in the power spectra and in the horizontal to vertical spectral ratio. This winding part is due to the sags of the coherence functions, of which value at the bottom of the deepest sag reaches to -0.637 and suggests the disturbance, not by stochastic noise but coherent ones. This disturbance was suppressed when CCA was applied, but detectable. Then, we obtained broadband dispersion curves from 0.2 Hz to the frequency higher than 5 Hz at three sites and to 20 Hz in two of them where various methods were applied intensively.
- 1 December 2018
- Published by Elsevier in Earth and Planetary Science Letters
- Vol. 504, 115-125
Lateral variations of the midcrustal seismicity in western Nepal: Seismotectonic implications
- 1 December 2018
- Published by Elsevier in Earth and Planetary Science Letters
- Vol. 504, 115-125
Lateral variations of the midcrustal seismicity in western Nepal: Seismotectonic implications
- Open Access
- 5 November 2015
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 203 (3) , 2119-2124
The aftershock sequence of the 2015 April 25 Gorkha–Nepal earthquake
The M 7.8 2015 April 25 Gorkha earthquake devastated the mountainous southern rim of the High Himalayan range in central Nepal. The main shock was followed by 553 earthquakes of local magnitude greater than 4.0 within the first 45 days. In this study, we present and qualify the bulletin of the permanent National Seismological Centre network to determine the spatio-temporal distribution of the aftershocks. The Gorkha sequence defines a ∼140-km-long ESE trending structure, parallel to the mountain range, abutting on the presumed extension of the rupture plane of the 1934 M 8.4 earthquake. In addition, we observe a second seismicity belt located southward, under the Kathmandu basin and in the northern part of the Mahabarat range. Many aftershocks of the Gorkha earthquake sequence have been felt by the 3 millions inhabitants of the Kathmandu valley.
- 5 November 2015
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 203 (3) , 2119-2124
Open AccessThe aftershock sequence of the 2015 April 25 Gorkha–Nepal earthquake
The M 7.8 2015 April 25 Gorkha earthquake devastated the mountainous southern rim of the High Himalayan range in central Nepal. The main shock was followed by 553 earthquakes of local magnitude greater than 4.0 within the first 45 days. In this study, we present and qualify the bulletin of the permanent National Seismological Centre network to determine the spatio-temporal distribution of the aftershocks. The Gorkha sequence defines a ∼140-km-long ESE trending structure, parallel to the mountain range, abutting on the presumed extension of the rupture plane of the 1934 M 8.4 earthquake. In addition, we observe a second seismicity belt located southward, under the Kathmandu basin and in the northern part of the Mahabarat range. Many aftershocks of the Gorkha earthquake sequence have been felt by the 3 millions inhabitants of the Kathmandu valley.
- Top Cited Papers
- 4 September 2015
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 349 (6252) , 1091-1095
Slip pulse and resonance of the Kathmandu basin during the 2015 Gorkha earthquake, Nepal
The bigger they are, the harder they fall: The magnitude 7.8 Gorkha earthquake hit Nepal on 25 April 2015. The earthquake killed thousands and caused great damage. Galetzka et al. determined how the fault that caused this earthquake ruptured. The rupture showed a smooth slip pulse 20 km wide that moved eastward along the fault over about 6 s. The nature of the rupture limited damage to regular dwellings but generated shaking that collapsed taller structures. Science , this issue p. 1091
- 4 September 2015
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 349 (6252) , 1091-1095
Top Cited PapersSlip pulse and resonance of the Kathmandu basin during the 2015 Gorkha earthquake, Nepal
The bigger they are, the harder they fall: The magnitude 7.8 Gorkha earthquake hit Nepal on 25 April 2015. The earthquake killed thousands and caused great damage. Galetzka et al. determined how the fault that caused this earthquake ruptured. The rupture showed a smooth slip pulse 20 km wide that moved eastward along the fault over about 6 s. The nature of the rupture limited damage to regular dwellings but generated shaking that collapsed taller structures. Science , this issue p. 1091