M. D. Mohan Gift
Research Subjects
M. D. Mohan Gift has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Ram Subbiah
2 shared publicationsRaviteja Surakasi
2 shared publications- Sampath Boopathi
Department of mechanical engineering, Muthayammal Engineering College, Namakkal, India
2 shared publications A. H. Seikh
Mechanical Engineering Department
1 shared publicationA.G. MohanDas Gandhi
1 shared publicationAnand Chakaravarthi M C
1 shared publication
Latest Publications
- 21 February 2025
- Published by IGI Global Scientific Publishing
- p. 119-150
Harnessing Pedagogical Content Knowledge for Cross-Disciplinary Innovation in Engineering
The chapter will present the integration of PCK toward the fostering of cross-disciplinary innovation within engineering. Being itself the composite of content expertise with effective teaching strategies, PCK acts as the main ingredient in developing holistic approaches to education that transcend traditional boundaries. On the basis of PCK, educators will be able to design curricula that enhance not only disciplinary-based understanding but also interdisciplinary collaboration. The chapter shares cases on how PCK-driven approaches to engineering education will let learners solve complex problems creatively and think innovatively about a wide range of contexts. It also provides strategies for embedding PCK in engineering programs through collaborative projects, interdisciplinary workshops, and experiential learning opportunities.
- 21 February 2025
- Published by IGI Global Scientific Publishing
- p. 119-150
Harnessing Pedagogical Content Knowledge for Cross-Disciplinary Innovation in Engineering
The chapter will present the integration of PCK toward the fostering of cross-disciplinary innovation within engineering. Being itself the composite of content expertise with effective teaching strategies, PCK acts as the main ingredient in developing holistic approaches to education that transcend traditional boundaries. On the basis of PCK, educators will be able to design curricula that enhance not only disciplinary-based understanding but also interdisciplinary collaboration. The chapter shares cases on how PCK-driven approaches to engineering education will let learners solve complex problems creatively and think innovatively about a wide range of contexts. It also provides strategies for embedding PCK in engineering programs through collaborative projects, interdisciplinary workshops, and experiential learning opportunities.
- 24 May 2024
- Published by Springer Nature in Macromolecular Research
- Vol. 32 (10) , 947-958
Load bearing investigations on lightweight rubber seed husk cellulose–ABS 3D-printed core and sunn hemp fiber-polyester composite skin building material
- 24 May 2024
- Published by Springer Nature in Macromolecular Research
- Vol. 32 (10) , 947-958
Load bearing investigations on lightweight rubber seed husk cellulose–ABS 3D-printed core and sunn hemp fiber-polyester composite skin building material
- 18 March 2024
- Published by IGI Global Scientific Publishing
- p. 255-287
Additive Manufacturing and 3D Printing Innovations
Additive manufacturing (AM), commonly known as 3D printing, has emerged as a transformative technology with profound implications for multiple industries. The convergence of AM with Industry 4.0 principles and advanced technologies has given rise to Industry 5.0, a new era of manufacturing characterized by enhanced integration and digitalization. This chapter explores the dynamic landscape of AM within the context of Industry 5.0, highlighting research trends, innovations, and challenges. Key developments include materials advancements, multi-material printing, digital twins, bioprinting, AI-driven design, and sustainability initiatives. Industry 5.0's impact is felt globally, with applications spanning aerospace, healthcare, fashion, and beyond. Collaboration between academia and industry, regulatory frameworks, and the pursuit of sustainable practices are driving forces shaping the future of AM in Industry 5.0.
- 18 March 2024
- Published by IGI Global Scientific Publishing
- p. 255-287
Additive Manufacturing and 3D Printing Innovations
Additive manufacturing (AM), commonly known as 3D printing, has emerged as a transformative technology with profound implications for multiple industries. The convergence of AM with Industry 4.0 principles and advanced technologies has given rise to Industry 5.0, a new era of manufacturing characterized by enhanced integration and digitalization. This chapter explores the dynamic landscape of AM within the context of Industry 5.0, highlighting research trends, innovations, and challenges. Key developments include materials advancements, multi-material printing, digital twins, bioprinting, AI-driven design, and sustainability initiatives. Industry 5.0's impact is felt globally, with applications spanning aerospace, healthcare, fashion, and beyond. Collaboration between academia and industry, regulatory frameworks, and the pursuit of sustainable practices are driving forces shaping the future of AM in Industry 5.0.
- 14 July 2023
- Published by IGI Global Scientific Publishing
- p. 123-141
Biomining Method to Extract Metal Components Using Computer-Printed Circuit Board E-Waste
In the present scenario, the e-waste from the various electronic sectors has been increasing due to increased utilization of electric components. In this chapter, the bioleaching(biomining) process of a computer printed circuit board (CPCB) is illustrated to extract the metal components. Basic concepts for e-waste management, their impacts, and various e-waste treatment methods have been explained. The various existing conventional metal extraction methods for the wasted CPCB have also been explored. Definitions, types, cryogenic bioleaching (biomining), influencing factors, and procedures of the bioleaching process have been illustrated. The microbiological methods for the processing of e-waste, the selection of process parameters, and the optimization or maximization of metal extraction processes were demonstrated to promote the e-waste management processes. Request access from your librarian to read this chapter's full text.
- 14 July 2023
- Published by IGI Global Scientific Publishing
- p. 123-141
Biomining Method to Extract Metal Components Using Computer-Printed Circuit Board E-Waste
In the present scenario, the e-waste from the various electronic sectors has been increasing due to increased utilization of electric components. In this chapter, the bioleaching(biomining) process of a computer printed circuit board (CPCB) is illustrated to extract the metal components. Basic concepts for e-waste management, their impacts, and various e-waste treatment methods have been explained. The various existing conventional metal extraction methods for the wasted CPCB have also been explored. Definitions, types, cryogenic bioleaching (biomining), influencing factors, and procedures of the bioleaching process have been illustrated. The microbiological methods for the processing of e-waste, the selection of process parameters, and the optimization or maximization of metal extraction processes were demonstrated to promote the e-waste management processes. Request access from your librarian to read this chapter's full text.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2790 (1)
A comprehensive review of the significance of auditory emission methods in debonding analysis
Auditory Emission (AE) approaches are well-known for their novel approach to understanding the intricacies involved in debonding sequence analysis, which is essential in substantiating joint validation. The calculations’ applicability is based on the technique developed for increasing the clarity of the received AE signal during AE testing. The AE application’s computing implementation simply avoids the confusions caused by signal clustering. As a consequence, it is critical to undertake an orderly review of the AE computation implementation process, which will certainly provide clarity and insight in the debonding prediction technique development. The goal of this paper is to go through a few techniques for debonding analysis of adhesive connections that are often utilised in AE applications.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2790 (1)
Open AccessA comprehensive review of the significance of auditory emission methods in debonding analysis
Auditory Emission (AE) approaches are well-known for their novel approach to understanding the intricacies involved in debonding sequence analysis, which is essential in substantiating joint validation. The calculations’ applicability is based on the technique developed for increasing the clarity of the received AE signal during AE testing. The AE application’s computing implementation simply avoids the confusions caused by signal clustering. As a consequence, it is critical to undertake an orderly review of the AE computation implementation process, which will certainly provide clarity and insight in the debonding prediction technique development. The goal of this paper is to go through a few techniques for debonding analysis of adhesive connections that are often utilised in AE applications.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2854 (1) , 020061
A review of polyurethane adhesives in the characterization of bonding
Adhesives are considered to be a novel way of optimizing joint behavior and stability in various engineering applications. All types of adhesives which are heat
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2854 (1) , 020061
Open AccessA review of polyurethane adhesives in the characterization of bonding
Adhesives are considered to be a novel way of optimizing joint behavior and stability in various engineering applications. All types of adhesives which are heat
- 27 September 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 72, 2351-2357
Experimental analysis of the combined effect of thermal barrier coating material and the nanoparticle augmented fuel usage on CI engine characteristics
- 27 September 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 72, 2351-2357
Experimental analysis of the combined effect of thermal barrier coating material and the nanoparticle augmented fuel usage on CI engine characteristics
- 1 September 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 69, 1080-1086
Determination of prohibition mechanism of cationic polymer / SiO2 composite as inhibitor in water using drilling fluid
- 1 September 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 69, 1080-1086
Determination of prohibition mechanism of cationic polymer / SiO2 composite as inhibitor in water using drilling fluid
- Open Access
- 28 April 2022
- Published by Wiley in Advances in Polymer Technology
- Vol. 2022, 1-8
Mechanical Behaviour of Alkali-Treated Fabric-Reinforced Polymer Matrix Composites
Polyethylene (PE) was used as a composite material to create a fabric containing 40% pineapple, 30% jute, and 30% cotton fibres by weight. The physical characterisation is carried out, like deterioration and water absorption tests. PE-based composites were shown to have a lower water absorption rate when dipped in deionized water to perform an absorption test. Fabric/PE composites decomposed slowly in the soil during the degradation test. Alkali solution of 5 percent, 7 percent, and 9 percent sodium hydroxide by weight for 60 minutes was studied as alkali impact mechanical characteristics: mechanical testing’s like tensile strength and modulus, elongation at break, bending strength, and modulus. Data investigation exposed that the tensile strength and modulus, elongation at break, bending strength, and composite modulus values were 64 MPa and 871 MPa, 23.14 percent, 45 MPa, and 512 MPa. There were tensile strength and modulus, elongation at break, bending strength, and modulus of the neat polyethylene sheet that were 32Mpa and 342 MPa, 79 percent, 22 MPa, and 234 MPa, respectively. Compared to a polyethylene sheet, composite values for tensile strength and modulus, bending strength, and modulus raised by 107%, 156%, 110%, and 115% as a result of fabric reinforcing.
- 28 April 2022
- Published by Wiley in Advances in Polymer Technology
- Vol. 2022, 1-8
Open AccessMechanical Behaviour of Alkali-Treated Fabric-Reinforced Polymer Matrix Composites
Polyethylene (PE) was used as a composite material to create a fabric containing 40% pineapple, 30% jute, and 30% cotton fibres by weight. The physical characterisation is carried out, like deterioration and water absorption tests. PE-based composites were shown to have a lower water absorption rate when dipped in deionized water to perform an absorption test. Fabric/PE composites decomposed slowly in the soil during the degradation test. Alkali solution of 5 percent, 7 percent, and 9 percent sodium hydroxide by weight for 60 minutes was studied as alkali impact mechanical characteristics: mechanical testing’s like tensile strength and modulus, elongation at break, bending strength, and modulus. Data investigation exposed that the tensile strength and modulus, elongation at break, bending strength, and composite modulus values were 64 MPa and 871 MPa, 23.14 percent, 45 MPa, and 512 MPa. There were tensile strength and modulus, elongation at break, bending strength, and modulus of the neat polyethylene sheet that were 32Mpa and 342 MPa, 79 percent, 22 MPa, and 234 MPa, respectively. Compared to a polyethylene sheet, composite values for tensile strength and modulus, bending strength, and modulus raised by 107%, 156%, 110%, and 115% as a result of fabric reinforcing.
- 16 March 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 62, 2021-2025
Comparative investigation and optimization of turning process parameters using Taguchi technique in turning of Inconel 718
- 16 March 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 62, 2021-2025
Comparative investigation and optimization of turning process parameters using Taguchi technique in turning of Inconel 718