Quang-Duy Nguyen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Quang-Duy Nguyen has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Jean-Pierre Chanet
Unité TSCF (Technologies et Systèmes d’Information pour les Agroécosystèmes), INRAE, Université Clermont Auvergne, 63172 Aubière, France
3 shared publications Patrick Bellot
LTCI, Telecom Paris, Institut Polytechnique de Paris,Palaiseau,France,91120
3 shared publications- Catherine Roussey
Université Clermont Auvergne, INRAE, UR TSCF
2 shared publications - Christophe De Vaulx
Université Clermont Auvergne
2 shared publications Saadia Dhouib
Universite Paris-Saclay,CEA, List,Palaiseau,France,F-91120
2 shared publications- Yining Huang
Université Paris-Saclay, CEA, List, F-91120 Palaiseau, France
2 shared publications
Latest Publications
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Interoperability and Upgradability Improvement for Context-Aware Systems in Agriculture 4.0
Amélioration de l’interopérabilité et de l’évolutivité pour les systèmes contextuels dans l’agriculture 4.0: La prochaine évolution de l’agriculture est l’Agriculture 4.0. Dans ce domaine, les nouvelles technologies de l’Internet des Objets (IdO) et les systèmes contextuels sont utilisés pour améliorer les performances des activités agricoles. Un système contextuel est un système capable de réagir automatiquement et adéquatement en fonction du contexte. Le fait d’utiliser un tel système permet non seulement de réduire la charge de travail des agriculteurs, mais aussi d’améliorer la précision des activités agricoles. Cependant, leur emploi dans le monde rencontre deux obstacles spécifiques. Le premier obstacle est le besoin de mettre régulièrement à jour le système contextuel sans changer sa fonctionnalité. Ce besoin s’appuie sur le fait que l’agriculture est une activité saisonnière, avec un lieu de travail externe, ce qui implique plusieurs facteurs imprévisibles qui influent sur les aspects logiciels et matériels du système. Le deuxième obstacle est l’hétérogénéité de données générées à partir du système contextuel. Dans le domaine agricole, on trouve des capteurs variés observant des phénomènes variés et produisant des données également variées. Représenter ces données est un fait nécessaire pour l’interopérabilité des dispositifs à l’intérieur un système contextuel, ou pour l’interopérabilité de plusieurs systèmes contextuels différents à l’intérieur l’écosystème de l’IdO. Cette thèse propose trois contributions. La première est une architecture s’appuyant sur le principe de microservice. Cette architecture est une pile de services pour les systèmes contextuels, qui permet aux développeurs d’un système de se focaliser sur les objectifs des services plutôt que leurs aspects logiciels et matériels. La deuxième contribution est une ontologie, intitulé CASO, dédiée aux systèmes contextuels. Cette ontologie fournit un vocabulaire pour modéliser les données générées par le système contextuel. De plus, elle inclut un mécanisme pour créer des règles de raisonnement. La troisième contribution est un système d’aide à la décision (SAD) pour l’irrigation automatique, développé à partir d’IRRINOV® , une méthode d’irrigation manuelle. Il fait partie d’un système contextuel dédié à l’irrigation de l’équipe TSCF d’INRAE. Ce SAD est basé sur la pile de services pour les systèmes contextuels,et utilise l’ontologie IRRIG, une spécialisation de CASO dédiée à l’irrigation. Les trois contributions vont être appliquées dans un système contextuel d’irrigation déployé dans l’AgroTechnoPôle, situé à Montoldre, en France.
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Interoperability and Upgradability Improvement for Context-Aware Systems in Agriculture 4.0
Amélioration de l’interopérabilité et de l’évolutivité pour les systèmes contextuels dans l’agriculture 4.0: La prochaine évolution de l’agriculture est l’Agriculture 4.0. Dans ce domaine, les nouvelles technologies de l’Internet des Objets (IdO) et les systèmes contextuels sont utilisés pour améliorer les performances des activités agricoles. Un système contextuel est un système capable de réagir automatiquement et adéquatement en fonction du contexte. Le fait d’utiliser un tel système permet non seulement de réduire la charge de travail des agriculteurs, mais aussi d’améliorer la précision des activités agricoles. Cependant, leur emploi dans le monde rencontre deux obstacles spécifiques. Le premier obstacle est le besoin de mettre régulièrement à jour le système contextuel sans changer sa fonctionnalité. Ce besoin s’appuie sur le fait que l’agriculture est une activité saisonnière, avec un lieu de travail externe, ce qui implique plusieurs facteurs imprévisibles qui influent sur les aspects logiciels et matériels du système. Le deuxième obstacle est l’hétérogénéité de données générées à partir du système contextuel. Dans le domaine agricole, on trouve des capteurs variés observant des phénomènes variés et produisant des données également variées. Représenter ces données est un fait nécessaire pour l’interopérabilité des dispositifs à l’intérieur un système contextuel, ou pour l’interopérabilité de plusieurs systèmes contextuels différents à l’intérieur l’écosystème de l’IdO. Cette thèse propose trois contributions. La première est une architecture s’appuyant sur le principe de microservice. Cette architecture est une pile de services pour les systèmes contextuels, qui permet aux développeurs d’un système de se focaliser sur les objectifs des services plutôt que leurs aspects logiciels et matériels. La deuxième contribution est une ontologie, intitulé CASO, dédiée aux systèmes contextuels. Cette ontologie fournit un vocabulaire pour modéliser les données générées par le système contextuel. De plus, elle inclut un mécanisme pour créer des règles de raisonnement. La troisième contribution est un système d’aide à la décision (SAD) pour l’irrigation automatique, développé à partir d’IRRINOV® , une méthode d’irrigation manuelle. Il fait partie d’un système contextuel dédié à l’irrigation de l’équipe TSCF d’INRAE. Ce SAD est basé sur la pile de services pour les systèmes contextuels,et utilise l’ontologie IRRIG, une spécialisation de CASO dédiée à l’irrigation. Les trois contributions vont être appliquées dans un système contextuel d’irrigation déployé dans l’AgroTechnoPôle, situé à Montoldre, en France.
- Open Access
Manufacturing 4.0: Checking the Feasibility of a Work Cell Using Asset Administration Shell and Physics-Based Three-Dimensional Digital Twins
Feasibility checking is a step in manufacturing system engineering for verifying the normalization and effectiveness of a manufacturing system associated with a specific configuration of resources and processes. It enables factory operators to predict problems before operational time, thus preventing equipment and machinery accidents and reducing labor waste in physically organizing the shop floor. In Industry 4.0, feasibility checking becomes even more critical since emerging challenges, such as mass personalization, require reconfiguring work cells quickly and flexibly on demand. Regarding this need, digital twin technologies have emerged as an ideal candidate for practicing feasibility checking. Indeed, they are tools used to implement digital representations of manufacturing entities that can constitute a digital environment and context. Factory operators can test a manufacturing process within a digital environment in different contexts before the execution with physical resources. This approach currently receives significant attention from the manufacturing community; however, there is still a lack of sharing experiences to implement it. Thus, this paper contributes a methodology to engineer a digital environment and context for a manufacturing work cell using AAS digital twins and physics-based 3D digital twins technologies. Technically, this methodology is a specific case of N-DTs, a general methodology for engineering heterogeneous digital twins. The product assembly line case study, also presented in this paper, is a successful experiment applying the above contributions. The two methodologies and the case study can be helpful references for both public and private sectors to deploy their feasibility-checking frameworks and deal with heterogeneous digital twins in general.
Open AccessManufacturing 4.0: Checking the Feasibility of a Work Cell Using Asset Administration Shell and Physics-Based Three-Dimensional Digital Twins
Feasibility checking is a step in manufacturing system engineering for verifying the normalization and effectiveness of a manufacturing system associated with a specific configuration of resources and processes. It enables factory operators to predict problems before operational time, thus preventing equipment and machinery accidents and reducing labor waste in physically organizing the shop floor. In Industry 4.0, feasibility checking becomes even more critical since emerging challenges, such as mass personalization, require reconfiguring work cells quickly and flexibly on demand. Regarding this need, digital twin technologies have emerged as an ideal candidate for practicing feasibility checking. Indeed, they are tools used to implement digital representations of manufacturing entities that can constitute a digital environment and context. Factory operators can test a manufacturing process within a digital environment in different contexts before the execution with physical resources. This approach currently receives significant attention from the manufacturing community; however, there is still a lack of sharing experiences to implement it. Thus, this paper contributes a methodology to engineer a digital environment and context for a manufacturing work cell using AAS digital twins and physics-based 3D digital twins technologies. Technically, this methodology is a specific case of N-DTs, a general methodology for engineering heterogeneous digital twins. The product assembly line case study, also presented in this paper, is a successful experiment applying the above contributions. The two methodologies and the case study can be helpful references for both public and private sectors to deploy their feasibility-checking frameworks and deal with heterogeneous digital twins in general.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 999-1005
An OPC UA PubSub Implementation Approach for Memory-Constrained Sensor Devices
Open Platform Communications Unified Architecture (OPC UA) comprises 14 specifications to deploy an industrial system with reliability, security, and interoperability. While realizing this standard, the devices of the considering industrial system must have enough capabilities in computation and storage. It is a challenge in the Industrial Internet of Things (IIoT), a scenario in which field-level devices can be memory-constrained sensor devices. Tailoring OPC UA to fit such devices requires advanced programming skills; otherwise, system developers must simplify or remove some essential features of OPC UA. This paper presents another implementation approach to tailor OPC UA PubSub, a specification for the publish-subscribe messaging pattern, into memory-constrained sensor devices. This approach, titled OPC UA PubSub-C, proposes using a remote OPC UA server as a configurator to operate large-memory-footprint tasks for field-level devices.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 999-1005
An OPC UA PubSub Implementation Approach for Memory-Constrained Sensor Devices
Open Platform Communications Unified Architecture (OPC UA) comprises 14 specifications to deploy an industrial system with reliability, security, and interoperability. While realizing this standard, the devices of the considering industrial system must have enough capabilities in computation and storage. It is a challenge in the Industrial Internet of Things (IIoT), a scenario in which field-level devices can be memory-constrained sensor devices. Tailoring OPC UA to fit such devices requires advanced programming skills; otherwise, system developers must simplify or remove some essential features of OPC UA. This paper presents another implementation approach to tailor OPC UA PubSub, a specification for the publish-subscribe messaging pattern, into memory-constrained sensor devices. This approach, titled OPC UA PubSub-C, proposes using a remote OPC UA server as a configurator to operate large-memory-footprint tasks for field-level devices.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 615-618
Early Lessons Learned from the Development of a Local OPC UA-based Robotic Testbed for Research
OPC UA has been emerging as a widely-adopted standard in the industry. An OPC UA system represents its resources using an information model. This information model relies on the base OPCUA information model proposed by OPC Foundation, and is extensible with information models from other companion specifications and user-defined information models. When the system specification and design evolve, system developers need to update the information model from the system design. It is tricky for testbeds that frequently are updated with new devices, protocols, and development tools demanded by different use cases. This paper shares our long-term OPC UA-based robotic testbed for Industry 4.0 research and the strategy to develop it. The testbed's development follows the SysML standard for system specification and design and the OPC UA standard for system implementation. Its information model relies on the information models: OPCUA for Devices and VDMA OPC UA for Robotics.
- 1 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 615-618
Early Lessons Learned from the Development of a Local OPC UA-based Robotic Testbed for Research
OPC UA has been emerging as a widely-adopted standard in the industry. An OPC UA system represents its resources using an information model. This information model relies on the base OPCUA information model proposed by OPC Foundation, and is extensible with information models from other companion specifications and user-defined information models. When the system specification and design evolve, system developers need to update the information model from the system design. It is tricky for testbeds that frequently are updated with new devices, protocols, and development tools demanded by different use cases. This paper shares our long-term OPC UA-based robotic testbed for Industry 4.0 research and the strategy to develop it. The testbed's development follows the SysML standard for system specification and design and the OPC UA standard for system implementation. Its information model relies on the information models: OPCUA for Devices and VDMA OPC UA for Robotics.
- 27 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Towards a Web-of-Things Approach for OPC UA Field Device Discovery in the Industrial IoT
In the opc UA standard, the opc UA information model is the key to semantic interoperability. It refers to an organized structure representing resources in the form of opc UA nodes residing in an opc UA address space. Before runtime, an opc UA server requires an opc UA information model already filled with opc UA nodes corresponding to the available resources of its field devices. It is tricky to the Industrial Internet of Things, a scenario where random field devices can join a sys-tem at any time. Indeed, the opc UA server needs to dynamically discover such devices and update its opc UA information model with new relevant opc UA nodes. Regarding the above challenge, this paper introduces a Web-of-Things (WoT) approach that enables field devices to register with an opc UA server to join the system without manual configuration. The approach relies on WoT Discovery and WoT Thing Description
- 27 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Towards a Web-of-Things Approach for OPC UA Field Device Discovery in the Industrial IoT
In the opc UA standard, the opc UA information model is the key to semantic interoperability. It refers to an organized structure representing resources in the form of opc UA nodes residing in an opc UA address space. Before runtime, an opc UA server requires an opc UA information model already filled with opc UA nodes corresponding to the available resources of its field devices. It is tricky to the Industrial Internet of Things, a scenario where random field devices can join a sys-tem at any time. Indeed, the opc UA server needs to dynamically discover such devices and update its opc UA information model with new relevant opc UA nodes. Regarding the above challenge, this paper introduces a Web-of-Things (WoT) approach that enables field devices to register with an opc UA server to join the system without manual configuration. The approach relies on WoT Discovery and WoT Thing Description
- Open Access
- 19 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Stack of Services for Context-Aware Systems: An Internet-Of-Things System Design Approach
The Internet of Things is an ideal world in which all computing devices from all over the world connect and exchange data through the Internet. This new scenario demands context-aware systems to evolve with new characteristics; thus, brings new challenges for system developers in system development. While addressing these challenges, this paper presents a system design approach based on a stack of 16 services specialized for context-aware systems. The approach enables system developers to focus more on services than hardware and software components. The case study of a smart irrigation context-aware system, also presented in this paper, is an example of using this design approach in practice.
- 19 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Open AccessStack of Services for Context-Aware Systems: An Internet-Of-Things System Design Approach
The Internet of Things is an ideal world in which all computing devices from all over the world connect and exchange data through the Internet. This new scenario demands context-aware systems to evolve with new characteristics; thus, brings new challenges for system developers in system development. While addressing these challenges, this paper presents a system design approach based on a stack of 16 services specialized for context-aware systems. The approach enables system developers to focus more on services than hardware and software components. The case study of a smart irrigation context-aware system, also presented in this paper, is an example of using this design approach in practice.
- 13 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 7 (10) , 10719-10732
A Conceptual Data Model and Its Automatic Implementation for IoT-Based Business Intelligence Applications
In the context of Industry 4.0, the analysis of Internet of Things (IoT) data with Business Intelligence (BI) technologies has acquired high relevance. However, designing and implementing IoT-based BI applications is hard for several reasons. Therefore, we propose a novel conceptual data model based on UML Profiles and Model Driven Architecture (MDA) for modelling and implementing IoT-based BI applications. Our approach provides highly readable data models of IoT, which are also compatible with traditional BI data models. Furthermore, it could help in the implementation process of the IoT subsystem through automatic code generation.
- 13 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 7 (10) , 10719-10732
A Conceptual Data Model and Its Automatic Implementation for IoT-Based Business Intelligence Applications
In the context of Industry 4.0, the analysis of Internet of Things (IoT) data with Business Intelligence (BI) technologies has acquired high relevance. However, designing and implementing IoT-based BI applications is hard for several reasons. Therefore, we propose a novel conceptual data model based on UML Profiles and Model Driven Architecture (MDA) for modelling and implementing IoT-based BI applications. Our approach provides highly readable data models of IoT, which are also compatible with traditional BI data models. Furthermore, it could help in the implementation process of the IoT subsystem through automatic code generation.
- Open Access
- 5 March 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (5) , 1803
Development Experience of a Context-Aware System for Smart Irrigation Using CASO and IRRIG Ontologies
The rapid development of information and communication technologies and wireless sensor networks has transformed agriculture practices. New tools and methods are used to support farmers in their activities. This paper presents a context-aware system that automates irrigation decisions based on sensor measurements. Automatic irrigation overcomes the water shortage problem, and automatic sensor measurements reduce the observational work of farmers. This paper focuses on a method for developing context-aware systems using ontologies. Ontologies are used to solve heterogeneity issues in sensor measurements. Their main goal is to propose a shared data schema that precisely describes measurements to ease their interpretations. These descriptions are reusable by any machine and understandable by humans. The context-aware system also contains a decision support system based on a rules inference engine. We propose two new ontologies: The Context-Aware System Ontology addresses the development of the context-aware system in general. The Irrigation ontology automates a manual irrigation method named IRRINOV®. These ontologies reuse well-known ontologies such as the Semantic Sensor Network (SSN) and Smart Appliance REFerence (SAREF). The decision support system uses a set of rules with ontologies to infer daily irrigation decisions for farmers. This project uses real experimental data to evaluate the implementation of the decision support system.
- 5 March 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (5) , 1803
Open AccessDevelopment Experience of a Context-Aware System for Smart Irrigation Using CASO and IRRIG Ontologies
The rapid development of information and communication technologies and wireless sensor networks has transformed agriculture practices. New tools and methods are used to support farmers in their activities. This paper presents a context-aware system that automates irrigation decisions based on sensor measurements. Automatic irrigation overcomes the water shortage problem, and automatic sensor measurements reduce the observational work of farmers. This paper focuses on a method for developing context-aware systems using ontologies. Ontologies are used to solve heterogeneity issues in sensor measurements. Their main goal is to propose a shared data schema that precisely describes measurements to ease their interpretations. These descriptions are reusable by any machine and understandable by humans. The context-aware system also contains a decision support system based on a rules inference engine. We propose two new ontologies: The Context-Aware System Ontology addresses the development of the context-aware system in general. The Irrigation ontology automates a manual irrigation method named IRRINOV®. These ontologies reuse well-known ontologies such as the Semantic Sensor Network (SSN) and Smart Appliance REFerence (SAREF). The decision support system uses a set of rules with ontologies to infer daily irrigation decisions for farmers. This project uses real experimental data to evaluate the implementation of the decision support system.
- 18 June 2016
- Published by Springer Nature in Lecture Notes in Computer Science
- p. 202-214
RPL Border Router Redundancy in the Internet of Things
- 18 June 2016
- Published by Springer Nature in Lecture Notes in Computer Science
- p. 202-214
RPL Border Router Redundancy in the Internet of Things