JSJakub Sieminski

Jakub Sieminski

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jakub Sieminski has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ethylene vinyl acetate copolymer/halloysite nanotubes nanocomposites with enhanced mechanical and thermal properties

    by Agata Zubkiewicz, Anna Szymczyk, Sandra Paszkiewicz, Roman Jędrzejewski, Elżbieta Piesowicz, Jakub Siemiński

    Ethylene vinyl acetate (EVA) nanocomposites filled with halloysite nanotubes (HNTs) were prepared by melt compounding. The homogenous dispersion of HNTs into the EVA matrix was evaluated by SEM and TEM analysis. The addition of HNTs does not influence on the phase separation structure and crystallinity of EVA nanocomposites. Due to the reinforcing effect of HNTs embedded in the EVA elastomer matrix, along with an increase of HNTs concentration, the improvement in tensile properties, by means of modulus at an elongation of 100% and tensile strength, was observed. It was found that tensile strength increased by 27% for EVA nanocomposite with 8 wt% of the HNTs. The values of elongation at break at low HNTs' loading increase and subsequently at higher loading are comparable to the neat EVA copolymer. The elastic deformability and reversibility of the EVA nanocomposites with different HNTs content was analyzed. The cyclic tensile tests showed that prepared nanocomposites have values of permanent set slightly higher than for neat EVA copolymer. Furthermore, the limiting oxygen index value for the EVA based nanocomposite with the highest HNTs content (8 wt%) increased from 19.5 to 24.8%. The results show, that thermo‐oxidative stability were improved by the incorporation of HNTs into EVA copolymer matrix.


  • Open Access

    Comparison study of the influence of carbon and halloysite nanotubes on the preparation and rheological behavior of linear low density polyethylene

    by Maksymilian Burzynski, Sandra Paszkiewicz, Elzbieta Piesowicz, Izabela Irska, Kamil Dydek, Anna Boczkowska, Stanislaw Wysocki, Jakub Sieminski

    Two 1D-types’ nanofillers, in the form of multi-walled carbon nanotubes (MWCNTs) and halloysite nanotubes (HNTs), were introduced in an amount of 10, 15 and 20 wt % to linear low density polyethylene (LLDPE) in order to compare their effect on rheological properties. The neat LLDPE and its nanocomposites were obtained by direct melt blending. Since rheological properties have a key impact on the processing of polymer materials, it has been determined whether and how carbon and non-carbon nanotubes affect the viscosity of the composition. It was found that the addition of MWCNTs more significantly affects both the melt viscosity as well as the storage and loss moduli of the LLDPE matrix, compared to HNTs-based nanocomposites.