Haoyu Sun

The contact interface variables are difficult to measure for an ultrasonic motor. When the ultrasonic motor works under different preloads, the error between the traditional efficiency model and the real output is quite large. In order to solve these two problems, we propose a novel efficiency model. It takes measured preload and the feedback voltage data as the input, which may offer better accuracy and on-line ability. Firstly, the effect of the preload on the drive characteristics is investigated, and the relationship between preload and the change in motor energy input is analyzed. Secondly, a contact model based on measured preload and feedback voltage is built, providing a more accurate description of the contact variables. Finally, an efficiency model was developed with a new composite stator structure. A preload test rig for a 60 mm ultrasonic motor is built and real operating conditions are measured. The results show that the correlation coefficient of the present model is 0.991, larger than 0.925 of the conventional model. The proposed model is more consistent with the real working conditions for the motor.

Preload optimization is very important for ultrasonic motors’ design and application. In this paper, a novel method for a traveling-wave rotary ultrasonic motor is proposed. Firstly, based on linear regression and the analytic hierarchy process (AHP), the mapping between the drive characteristics, mechanical characteristics, speed stability, and preload of the traveling-wave-type rotary ultrasonic motor was established. Then, the characteristic curves of stalling torque, no-load speed, maximum efficiency, and speed stability with the change of preload method were measured with a new test platform. Finally, three traveling-wave rotary ultrasonic motors with optimized preload were used in a cooperative manipulator for validation. The experimental results showed that when the preload was optimized from 200 N to 310 N, the stalling torque of the motor increased by 20.7%, the maximum efficiency increased by 15.3%, the standard deviation of the speed decreased by 53.8%, and the no-load speed decreased by 5.5%. Therefore, it can be seen that the new preload optimization approach can significantly improve the performance indexes of ultrasonic motors and meet the practical requirements of direct-drive cooperative manipulators in engineering applications. The new preload optimization method offers advantages in motor output performance compared to conventional methods.