Nicolas Bueno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nicolas Bueno has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Juan Manuel Mejia
Universidad Nacional de Colombia
5 shared publications - Yashar Mehmani
Energy and Mineral Engineering Department The Pennsylvania State University 16802 University Park Pennsylvania
3 shared publications Luis Ayala
2 shared publications- Hillmert Alexander Solano
Research Group on Flow and Transport Dynamics in Porous Media, Universidad Nacional de Colombia, Medellín 050034, Colombia
1 shared publication - Juan David Valencia
Facultad de Minas, Universidad Nacional de Colombia, Medellín Campus, Cr. 80 No. 65–223, Medellín 050034, Colombia
1 shared publication - Julián José Martínez Paternina
National University of Colombia
1 shared publication
Latest Publications
- 26 February 2026
- Published by Elsevier in Advances in Water Resources
- Vol. 211
Kinetic theory of multicomponent Ostwald ripening in porous media
- 26 February 2026
- Published by Elsevier in Advances in Water Resources
- Vol. 211
Kinetic theory of multicomponent Ostwald ripening in porous media
- 25 September 2024
- Published by Elsevier in Advances in Water Resources
- Vol. 193
A generalized kinetic theory of Ostwald ripening in porous media
- 25 September 2024
- Published by Elsevier in Advances in Water Resources
- Vol. 193
A generalized kinetic theory of Ostwald ripening in porous media
- Open Access
Semi-Implicit Finite Volume Procedure for Compositional Subsurface Flow Simulation in Highly Anisotropic Porous Media
Subsurface multiphase flow in porous media simulation is extensively used in many disciplines. Large meshes with non-orthogonalities (e.g., corner point geometries) and full tensor highly anisotropy ratios are usually required for subsurface flow applications. Nonetheless, simulations using two-point flux approximations (TPFA) fail to accurately calculate fluxes in these types of meshes. Several simulators account for non-orthogonal meshes, but their discretization method is usually non-conservative. In this work, we propose a semi-implicit procedure for general compositional flow simulation in highly anisotropic porous media as an extension of TPFA. This procedure accounts for non-orthogonalities by adding corrections to residual in the Newton-Raphson method. Our semi-implicit formulation poses the guideline for FlowTraM (Flow and Transport Modeller) implementation for research and industry subsurface purposes. We validated FlowTraM with a non-orthogonal variation of the Third SPE Comparative Solution Project case. Our model is used to successfully simulating a real Colombian oil field.
Open AccessSemi-Implicit Finite Volume Procedure for Compositional Subsurface Flow Simulation in Highly Anisotropic Porous Media
Subsurface multiphase flow in porous media simulation is extensively used in many disciplines. Large meshes with non-orthogonalities (e.g., corner point geometries) and full tensor highly anisotropy ratios are usually required for subsurface flow applications. Nonetheless, simulations using two-point flux approximations (TPFA) fail to accurately calculate fluxes in these types of meshes. Several simulators account for non-orthogonal meshes, but their discretization method is usually non-conservative. In this work, we propose a semi-implicit procedure for general compositional flow simulation in highly anisotropic porous media as an extension of TPFA. This procedure accounts for non-orthogonalities by adding corrections to residual in the Newton-Raphson method. Our semi-implicit formulation poses the guideline for FlowTraM (Flow and Transport Modeller) implementation for research and industry subsurface purposes. We validated FlowTraM with a non-orthogonal variation of the Third SPE Comparative Solution Project case. Our model is used to successfully simulating a real Colombian oil field.
- Open Access
- 28 July 2021
- Published by Universidad Nacional de Colombia in DYNA
- Vol. 88 (218) , 127-135
Flue gas and nitrogen co-injection during cyclic steam stimulation in heavy oil reservoirs: a numerical evaluation
In this study, steam co-injection with flue gas or N2 was numerically reproduced to determine the best gas composition to be deployed in a Colombian heavy crude oil, using a commercial reservoir simulation software. The oil mixture was characterized via EoS parameters, withtuning average errors of 5%. Injection conditions were evaluated with thermal simulations to analyze the response in oil production, allowing to find a deployment strategy having the highest recovery with the lowest gas injection volume. Results agree with experimental observations regarding the starting times for co-injection and help to narrow the uncertainty range where gas and steam co-injection is asuitable recovery technique in heavy oil reservoirs. The study showed that the incremental oil recovery factor can be enhanced, at least, in 40% when optimizing the deployment of steam and flue gas co-injection for the well studied here
- 28 July 2021
- Published by Universidad Nacional de Colombia in DYNA
- Vol. 88 (218) , 127-135
Open AccessFlue gas and nitrogen co-injection during cyclic steam stimulation in heavy oil reservoirs: a numerical evaluation
In this study, steam co-injection with flue gas or N2 was numerically reproduced to determine the best gas composition to be deployed in a Colombian heavy crude oil, using a commercial reservoir simulation software. The oil mixture was characterized via EoS parameters, withtuning average errors of 5%. Injection conditions were evaluated with thermal simulations to analyze the response in oil production, allowing to find a deployment strategy having the highest recovery with the lowest gas injection volume. Results agree with experimental observations regarding the starting times for co-injection and help to narrow the uncertainty range where gas and steam co-injection is asuitable recovery technique in heavy oil reservoirs. The study showed that the incremental oil recovery factor can be enhanced, at least, in 40% when optimizing the deployment of steam and flue gas co-injection for the well studied here
- 1 January 2021
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 196
Heavy oil in-situ upgrading evaluation by a laboratory-calibrated EoS-based reservoir simulator
- 1 January 2021
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 196
Heavy oil in-situ upgrading evaluation by a laboratory-calibrated EoS-based reservoir simulator
- 17 September 2019
- Published by Society of Petroleum Engineers (SPE)
Practical Kinetic Coupling to Multi-Component and Multi-Phase Flow Transport During In-Situ Heavy Oil Upgrading Processes Using an Equation of State-Based Numerical Reservoir Simulation
A numerical simulation model was designed to evaluate the technical viability of in-situ upgrading using dispersed nanocatalysts in heavy oil reservoirs. Aquathermolysis reactions are represented by a practical kinetic model based on SARA analysis, being consistent with the thermodynamic characterization. With this simplified model, the API gravity enhancement in core-flooding tests was reproduced. The mathematical formulation couples mass and energy transport equations along with a rigorous three-phase equilibrium equation of state. Also, a nanoparticle transport equation was coupled to account for reversible and irreversible non-equilibrium retention, and water-oil partitioning. PVT data were matched successfully, including API gravities and oil viscosities. Reaction rates were adjusted by means of batch-reactor information, while nanoparticle retention was validated using reported single-phase core-flooding tests. Different core-flooding experiments from the literature were reproduced to calibrate the phases transport parameters, and further up-scaled to reservoir conditions. Validation of the model with experimental data suggests that the lumping scheme based on SARA analysis and the modeling of nanoparticle transport and retention, capture the most important phenomena occurring during in-situ upgrading processes. Field-scale simulations, of a sector model from an oil reservoir in the Magdalena Medio Valley basin in Colombia, showed that the in-situ upgrading with nanoparticles can increase the recovery factor up to 5% compared with typical steam injection. However, the oil upgrading achieved in the continuous injection was lower than the one obtained in the core-flooding tests. The numerical model presented in this work, which includes a dynamic nanoparticle retention model, changes on relative permeability alteration due to nanoparticle surface deposition, and a suited kinetic-thermodynamic representation, is able to describe correctly the most relevant phenomena observed during nanocatalysts in-situ upgrading process.
- 17 September 2019
- Published by Society of Petroleum Engineers (SPE)
Practical Kinetic Coupling to Multi-Component and Multi-Phase Flow Transport During In-Situ Heavy Oil Upgrading Processes Using an Equation of State-Based Numerical Reservoir Simulation
A numerical simulation model was designed to evaluate the technical viability of in-situ upgrading using dispersed nanocatalysts in heavy oil reservoirs. Aquathermolysis reactions are represented by a practical kinetic model based on SARA analysis, being consistent with the thermodynamic characterization. With this simplified model, the API gravity enhancement in core-flooding tests was reproduced. The mathematical formulation couples mass and energy transport equations along with a rigorous three-phase equilibrium equation of state. Also, a nanoparticle transport equation was coupled to account for reversible and irreversible non-equilibrium retention, and water-oil partitioning. PVT data were matched successfully, including API gravities and oil viscosities. Reaction rates were adjusted by means of batch-reactor information, while nanoparticle retention was validated using reported single-phase core-flooding tests. Different core-flooding experiments from the literature were reproduced to calibrate the phases transport parameters, and further up-scaled to reservoir conditions. Validation of the model with experimental data suggests that the lumping scheme based on SARA analysis and the modeling of nanoparticle transport and retention, capture the most important phenomena occurring during in-situ upgrading processes. Field-scale simulations, of a sector model from an oil reservoir in the Magdalena Medio Valley basin in Colombia, showed that the in-situ upgrading with nanoparticles can increase the recovery factor up to 5% compared with typical steam injection. However, the oil upgrading achieved in the continuous injection was lower than the one obtained in the core-flooding tests. The numerical model presented in this work, which includes a dynamic nanoparticle retention model, changes on relative permeability alteration due to nanoparticle surface deposition, and a suited kinetic-thermodynamic representation, is able to describe correctly the most relevant phenomena observed during nanocatalysts in-situ upgrading process.