Yuzhi Zhou
Research Subjects
Yuzhi Zhou has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Aihui Zhou
LSEC, Institute of Computational Mathematics and Scientific/Engineering Computing, Academy of Mathematics and Systems Science, Chinese Academy of Sciences, Beijing, 100190 China; School of Mathematical Sciences, University of Chinese Academy of Sciences, Beijing, 100049, China
3 shared publications- Aihui Zhou
Academy of Mathematics and Systems Science SKLMS Chinese Academy of Sciences 100190 Beijing China
3 shared publications D. C. Chrzan
Department of Materials Science and Engineering, University of California, Berkeley, California 94720, USA
3 shared publicationsDaisuke Kiriya
Electrical Engineering and Computer Sciences, University of California, Berkeley, CA, 94720, USA
3 shared publicationsE. E. Haller
Department of Materials Science and Engineering, University of California, Berkeley, California 94720, USA
3 shared publicationsJoel W. Ager
Department of Materials Science and Engineering, University of California, Berkeley, California 94720, USA
3 shared publications
Latest Publications
- 21 February 2025
- Published by Society for Industrial & Applied Mathematics (SIAM) in Multiscale Modeling & Simulation
- Vol. 23 (1) , 545-576
Convergence of the Planewave Approximations for Quantum Incommensurate Systems
Incommensurate structures come from stacking the single layers of low dimensional materials on top of one another with misalignment such as a twist in orientation. While these structures are of significant physical interest, they pose many theoretical challenges due to the loss of periodicity. This paper studies the physical observables of continuum Schrödinger operators for incommensurate systems. We characterize the density of states and local density of states in real and reciprocal spaces, and develop novel numerical methods to approximate them. In particular, we (i) justify the thermodynamic limit of the density of states and local density of states via the operator kernel characterization; and (ii) propose efficient numerical schemes based on plane wave approximation and the trapezoidal rule in reciprocal space. We present both rigorous analysis and numerical simulations to support the reliability and efficiency of our numerical algorithms.
- 21 February 2025
- Published by Society for Industrial & Applied Mathematics (SIAM) in Multiscale Modeling & Simulation
- Vol. 23 (1) , 545-576
Convergence of the Planewave Approximations for Quantum Incommensurate Systems
Incommensurate structures come from stacking the single layers of low dimensional materials on top of one another with misalignment such as a twist in orientation. While these structures are of significant physical interest, they pose many theoretical challenges due to the loss of periodicity. This paper studies the physical observables of continuum Schrödinger operators for incommensurate systems. We characterize the density of states and local density of states in real and reciprocal spaces, and develop novel numerical methods to approximate them. In particular, we (i) justify the thermodynamic limit of the density of states and local density of states via the operator kernel characterization; and (ii) propose efficient numerical schemes based on plane wave approximation and the trapezoidal rule in reciprocal space. We present both rigorous analysis and numerical simulations to support the reliability and efficiency of our numerical algorithms.
- 24 May 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (20)
Performance assessment of the effective core potentials under the fermionic neural network: First and second row elements
The rapid development of deep learning techniques has driven the emergence of a neural network-based variational Monte Carlo (VMC) method (referred to as FermiNet), which has manifested high accuracy and strong predictive power in the electronic structure calculations of atoms, molecules, and some periodic systems. Recently, the implementation of the effective core potential (ECP) scheme has further facilitated more efficient calculations in practice. However, there is still a lack of comprehensive assessments of the ECP’s performance under the FermiNet. In this work, we set sail to fill this gap by conducting extensive tests on the first two row elements regarding their atomic, spectral, and molecular properties. Our major finding is that, in general, the qualities of ECPs have been correctly reflected under FermiNet. Two recently built ECP tables, namely, correlation consistent ECP (ccECP) and energy consistent correlated electron pseudopotential (eCEPP), seem to prevail in terms of overall performance. In particular, ccECP performs slightly better on spectral precision and covers more elements, while eCEPP is more systematically built from both shape and energy consistency and better treats the core polarization. On the other hand, the high accuracy of the all-electron calculations is hindered by the absence of relativistic effects as well as the numerical instabilities in some heavier elements. Finally, with further in-depth discussions, we generate possible directions for developing and improving FermiNet in the near future.
- 24 May 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (20)
Performance assessment of the effective core potentials under the fermionic neural network: First and second row elements
The rapid development of deep learning techniques has driven the emergence of a neural network-based variational Monte Carlo (VMC) method (referred to as FermiNet), which has manifested high accuracy and strong predictive power in the electronic structure calculations of atoms, molecules, and some periodic systems. Recently, the implementation of the effective core potential (ECP) scheme has further facilitated more efficient calculations in practice. However, there is still a lack of comprehensive assessments of the ECP’s performance under the FermiNet. In this work, we set sail to fill this gap by conducting extensive tests on the first two row elements regarding their atomic, spectral, and molecular properties. Our major finding is that, in general, the qualities of ECPs have been correctly reflected under FermiNet. Two recently built ECP tables, namely, correlation consistent ECP (ccECP) and energy consistent correlated electron pseudopotential (eCEPP), seem to prevail in terms of overall performance. In particular, ccECP performs slightly better on spectral precision and covers more elements, while eCEPP is more systematically built from both shape and energy consistency and better treats the core polarization. On the other hand, the high accuracy of the all-electron calculations is hindered by the absence of relativistic effects as well as the numerical instabilities in some heavier elements. Finally, with further in-depth discussions, we generate possible directions for developing and improving FermiNet in the near future.
- 25 April 2023
- Published by Elsevier in Computational Materials Science
- Vol. 226
An extended plane wave framework for the electronic structure calculations of twisted bilayer material systems
- 25 April 2023
- Published by Elsevier in Computational Materials Science
- Vol. 226
An extended plane wave framework for the electronic structure calculations of twisted bilayer material systems
- Open Access
An extended plane wave framework for the electronic structure calculations of twisted bilayer material systems
In this paper, we propose an extended plane wave framework to make the electronic structure calculations of the twisted bilayer 2D material systems practically feasible. Based on the foundation in [Y. Zhou, H. Chen, A. Zhou, J. Comput. Phys. 384, 99 (2019)], following extensions take place: (1) an tensor-producted basis set, which adopts PWs in the incommensurate dimensions, and localized basis in the interlayer dimension, (2) a practical application of a novel cutoff techniques we have recently developed, and (3) a quasi-band structure picture under the small twisted angles and weak interlayer coupling limits. With (1) and (2) now the dimensions of Hamiltonian matrix are reduced by about 2 orders of magnitude compared with the original framework. And (3) enables us to better organize the calculations and understand the results. For numerical examples, we study the electronic structures of the linear bilayer graphene lattice system with the magic twisted angle ($\sim 1.05^{\circ}$). The famous flat bands have been reproduced with their features in quantitative agreement with those from experiments and other theoretical calculations. Moreover, the extended framework has much less computational cost compared to the commensurate cell approximations, and is more extendable compared to the traditional model hamiltonians and tight binding models. Finally this framework can readily accommodate nonlinear models thus will laid the foundations for more effective yet accurate Density Functional Theory (DFT) calculations.
Open AccessAn extended plane wave framework for the electronic structure calculations of twisted bilayer material systems
In this paper, we propose an extended plane wave framework to make the electronic structure calculations of the twisted bilayer 2D material systems practically feasible. Based on the foundation in [Y. Zhou, H. Chen, A. Zhou, J. Comput. Phys. 384, 99 (2019)], following extensions take place: (1) an tensor-producted basis set, which adopts PWs in the incommensurate dimensions, and localized basis in the interlayer dimension, (2) a practical application of a novel cutoff techniques we have recently developed, and (3) a quasi-band structure picture under the small twisted angles and weak interlayer coupling limits. With (1) and (2) now the dimensions of Hamiltonian matrix are reduced by about 2 orders of magnitude compared with the original framework. And (3) enables us to better organize the calculations and understand the results. For numerical examples, we study the electronic structures of the linear bilayer graphene lattice system with the magic twisted angle ($\sim 1.05^{\circ}$). The famous flat bands have been reproduced with their features in quantitative agreement with those from experiments and other theoretical calculations. Moreover, the extended framework has much less computational cost compared to the commensurate cell approximations, and is more extendable compared to the traditional model hamiltonians and tight binding models. Finally this framework can readily accommodate nonlinear models thus will laid the foundations for more effective yet accurate Density Functional Theory (DFT) calculations.
- 1 June 2021
- Published by Global Science Press in Communications in Computational Physics
- Vol. 30 (5) , 1474-1498
Layer-Splitting Methods for Time-Dependent Schrödinger Equations of Incommensurate Systems
This work considers numerical methods for the time-dependent Schrödinger equation of incommensurate systems. By using a plane wave method for spatial discretization, the incommensurate problem is lifted to a higher dimension that results in semidiscrete differential equations with extremely demanding computational cost. We propose several fully discrete time stepping schemes based on the idea of "layer-splitting", which decompose the semidiscrete problem into sub-problems that each corresponds to one of the periodic layers. Then these schemes handle only some periodic systems in the original lower dimension at each time step, which reduces the computational cost significantly and is natural to involve stochastic methods and parallel computing. Both theoretical analysis and numerical experiments are provided to support the reliability and efficiency of the algorithms. Incommensurate system, time-dependent Schrödinger equation, time stepping scheme. 35Q40, 35Q41, 65L05, 65L20 COPYRIGHT: © Global Science Press
- 1 June 2021
- Published by Global Science Press in Communications in Computational Physics
- Vol. 30 (5) , 1474-1498
Layer-Splitting Methods for Time-Dependent Schrödinger Equations of Incommensurate Systems
This work considers numerical methods for the time-dependent Schrödinger equation of incommensurate systems. By using a plane wave method for spatial discretization, the incommensurate problem is lifted to a higher dimension that results in semidiscrete differential equations with extremely demanding computational cost. We propose several fully discrete time stepping schemes based on the idea of "layer-splitting", which decompose the semidiscrete problem into sub-problems that each corresponds to one of the periodic layers. Then these schemes handle only some periodic systems in the original lower dimension at each time step, which reduces the computational cost significantly and is natural to involve stochastic methods and parallel computing. Both theoretical analysis and numerical experiments are provided to support the reliability and efficiency of the algorithms. Incommensurate system, time-dependent Schrödinger equation, time stepping scheme. 35Q40, 35Q41, 65L05, 65L20 COPYRIGHT: © Global Science Press
- 1 February 2021
- Published by Elsevier in Computational Materials Science
- Vol. 188
Plane wave study on the localized-extended transition in the one-dimensional incommensurate systems
- 1 February 2021
- Published by Elsevier in Computational Materials Science
- Vol. 188
Plane wave study on the localized-extended transition in the one-dimensional incommensurate systems
- 1 May 2019
- Published by Elsevier in Journal of Computational Physics
- Vol. 384, 99-113
Plane wave methods for quantum eigenvalue problems of incommensurate systems
- 1 May 2019
- Published by Elsevier in Journal of Computational Physics
- Vol. 384, 99-113
Plane wave methods for quantum eigenvalue problems of incommensurate systems
- Open Access
- 20 September 2018
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 2 (9) , 094004
Theory of thin-film-mediated exfoliation of van der Waals bonded layered materials
Tape-mediated mechanical exfoliation of layered materials is known to require multiple exfoliation steps and to produce small, irregularly shaped monolayer samples. Recently, it has been demonstrated experimentally that deposition of a thin layer of Au on the layer to be exfoliated prior to application of the tape can yield large monolayer samples of transition metal dichalcogenides in one exfoliation step. Here the mechanism underlying these improvements is explored using atomic scale total energy calculations to study thin-film-assisted mechanical exfoliation of both and graphene. This study focuses on the influence of epitaxially induced biaxial strain on the exfoliated layer and how this impacts monolayer selectivity during exfoliation. For graphite modeled with a reactive empirical bond order (REBO) plus a Lennard-Jones potential, tensile biaxial strain favors monolayer exfoliation, whereas compressive strain favors multilayer exfoliation. For graphite modeled with a more accurate registry-dependent potential and for modeled with a REBO plus a Lennard-Jones potential, both compressive and tensile biaxial strains favor monolayer exfoliation. A simple model based on the interlayer potential is introduced to explain these observations, and a linear stability analysis of this model shows that the differences between the thin-film-assisted exfoliation of the considered materials arise from the stacking structure of the layered material and the details of the interlayer potential. The potential for using this simple model to screen suitable metal films for exfoliation of other 2D materials is discussed.- 20 September 2018
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 2 (9) , 094004
Open AccessTheory of thin-film-mediated exfoliation of van der Waals bonded layered materials
Tape-mediated mechanical exfoliation of layered materials is known to require multiple exfoliation steps and to produce small, irregularly shaped monolayer samples. Recently, it has been demonstrated experimentally that deposition of a thin layer of Au on the layer to be exfoliated prior to application of the tape can yield large monolayer samples of transition metal dichalcogenides in one exfoliation step. Here the mechanism underlying these improvements is explored using atomic scale total energy calculations to study thin-film-assisted mechanical exfoliation of both and graphene. This study focuses on the influence of epitaxially induced biaxial strain on the exfoliated layer and how this impacts monolayer selectivity during exfoliation. For graphite modeled with a reactive empirical bond order (REBO) plus a Lennard-Jones potential, tensile biaxial strain favors monolayer exfoliation, whereas compressive strain favors multilayer exfoliation. For graphite modeled with a more accurate registry-dependent potential and for modeled with a REBO plus a Lennard-Jones potential, both compressive and tensile biaxial strains favor monolayer exfoliation. A simple model based on the interlayer potential is introduced to explain these observations, and a linear stability analysis of this model shows that the differences between the thin-film-assisted exfoliation of the considered materials arise from the stacking structure of the layered material and the details of the interlayer potential. The potential for using this simple model to screen suitable metal films for exfoliation of other 2D materials is discussed. - 9 March 2018
- Published by American Physical Society (APS) in Physical Review E
- Vol. 97 (3) , 033305
Applicability of Kerker preconditioning scheme to the self-consistent density functional theory calculations of inhomogeneous systems
The Kerker preconditioner, based on the dielectric function of homogeneous electron gas, is designed to accelerate the self-consistent field (SCF) iteration in the density functional theory calculations. However, a question still remains regarding its applicability to the inhomogeneous systems. We develop a modified Kerker preconditioning scheme which captures the long-range screening behavior of inhomogeneous systems and thus improves the SCF convergence. The effectiveness and efficiency is shown by the tests on long- slabs of metals, insulators, and metal-insulator contacts. For situations without a priori knowledge of the system, we design the a posteriori indicator to monitor if the preconditioner has suppressed charge sloshing during the iterations. Based on the a posteriori indicator, we demonstrate two schemes of the self-adaptive configuration for the SCF iteration.- 9 March 2018
- Published by American Physical Society (APS) in Physical Review E
- Vol. 97 (3) , 033305
Applicability of Kerker preconditioning scheme to the self-consistent density functional theory calculations of inhomogeneous systems
The Kerker preconditioner, based on the dielectric function of homogeneous electron gas, is designed to accelerate the self-consistent field (SCF) iteration in the density functional theory calculations. However, a question still remains regarding its applicability to the inhomogeneous systems. We develop a modified Kerker preconditioning scheme which captures the long-range screening behavior of inhomogeneous systems and thus improves the SCF convergence. The effectiveness and efficiency is shown by the tests on long- slabs of metals, insulators, and metal-insulator contacts. For situations without a priori knowledge of the system, we design the a posteriori indicator to monitor if the preconditioner has suppressed charge sloshing during the iterations. Based on the a posteriori indicator, we demonstrate two schemes of the self-adaptive configuration for the SCF iteration.- 1 January 2018
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 67 (21) , 218102
Model and applications of transition metal dichalcogenides based compliant substrate epitaxy system
The concept of compliant substrate epitaxy was first proposed by the scientists engaged in crystal growth in the early 1990s. The core idea is to take advantage of such an ultra-thin substrate that the film and the substrate generate strain together to relieve the lattice mismatch during the epitaxy growth. The quality of the epitaxial film is improved due to the reduction of the mismatch dislocation density. However, the preparation of the artificial ultra-thin substrate with good quality requires rather complicated fabrication process. On the other hand, many transition metal dichalcogenides naturally form the compliant substrates, due to their layered structure and weak van der Waals interlayer interaction. In this paper, we introduce the transition metal dichalcogenides based compliant substrate epitaxy model and relevant applications. Through combining density functional theory, linear elasticity theory and dislocation theory, we introduce the model comprehensively by using the Au-MoS2 as a prototypical example. And we explain the experimental results of Au growing on MoS2 from the early transition electron microscopy. In addition, we introduce the experimental work related to the model, especially the Au-mediated exfoliation of large, monolayer and high-quality MoS2. Future directions and relevant important problems to be solved are also discussed.
- 1 January 2018
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 67 (21) , 218102
Model and applications of transition metal dichalcogenides based compliant substrate epitaxy system
The concept of compliant substrate epitaxy was first proposed by the scientists engaged in crystal growth in the early 1990s. The core idea is to take advantage of such an ultra-thin substrate that the film and the substrate generate strain together to relieve the lattice mismatch during the epitaxy growth. The quality of the epitaxial film is improved due to the reduction of the mismatch dislocation density. However, the preparation of the artificial ultra-thin substrate with good quality requires rather complicated fabrication process. On the other hand, many transition metal dichalcogenides naturally form the compliant substrates, due to their layered structure and weak van der Waals interlayer interaction. In this paper, we introduce the transition metal dichalcogenides based compliant substrate epitaxy model and relevant applications. Through combining density functional theory, linear elasticity theory and dislocation theory, we introduce the model comprehensively by using the Au-MoS2 as a prototypical example. And we explain the experimental results of Au growing on MoS2 from the early transition electron microscopy. In addition, we introduce the experimental work related to the model, especially the Au-mediated exfoliation of large, monolayer and high-quality MoS2. Future directions and relevant important problems to be solved are also discussed.