Mostafa Karimi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mostafa Karimi has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Seyed Ashkan Hoseini Shekarabi
Department of Management, Faculty of Management, Alborz University, Qazvin, Iran
6 shared publications- Abolfazl Gharaei
Department of Mechanical and Industrial Engineering, Faculty of Engineering, University of Toronto, Toronto, Canada
3 shared publications Abolfazl Gharaei
Department of Mechanical and Industrial Engineering, Faculty of Engineering, University of Toronto, Toronto, Canada
2 shared publications- Abolfazl Gharaei
Department of Business Administration, University of Regina
1 shared publication Akram Dourani
1 shared publicationAlireza Amjadian
Department of Industrial Engineering, Faculty of Engineering, Kharazmi University
1 shared publication
Latest Publications
- 15 August 2021
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 10 (1)
Vendor-managed inventory for joint replenishment planning in the integrated qualitative supply chains: generalised benders decomposition under separability approach
Vendor managed inventory (VMI) is a well-established supply chain (SC) practice where the supplier is responsible for managing the inventory level at the retail point. In this paper, we engage the VMI in a multi-product integrated qualitative supply chain in order to make the best joint replenishment policy. Accordingly, a screening process classifies the products into good and defective products. This process imposes the reworking cost, the disposal cost, the holding cost, and the screening cost on the model. A penalty mechanism will penalise the supplier, if the replenishment quantity exceeds the certain upper bound agreed upon the VMI contract. The model comes with some real stochastic constraints. The mathematical formulation of the model is stochastic, Mix Integer Nonlinear Programming (MINLP), and hard to solve. In this regards, Generalised Benders Decomposition (GBD) under separability approach is employed for optimising the decision variables, including the number of shipments and shipment quantities. The results of numerical analyses showed an excellent performance of the provided method with respect to the optimality criteria like number of taken iterations, optimality error, infeasibility, and complementarity.
- 15 August 2021
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 10 (1)
Vendor-managed inventory for joint replenishment planning in the integrated qualitative supply chains: generalised benders decomposition under separability approach
Vendor managed inventory (VMI) is a well-established supply chain (SC) practice where the supplier is responsible for managing the inventory level at the retail point. In this paper, we engage the VMI in a multi-product integrated qualitative supply chain in order to make the best joint replenishment policy. Accordingly, a screening process classifies the products into good and defective products. This process imposes the reworking cost, the disposal cost, the holding cost, and the screening cost on the model. A penalty mechanism will penalise the supplier, if the replenishment quantity exceeds the certain upper bound agreed upon the VMI contract. The model comes with some real stochastic constraints. The mathematical formulation of the model is stochastic, Mix Integer Nonlinear Programming (MINLP), and hard to solve. In this regards, Generalised Benders Decomposition (GBD) under separability approach is employed for optimising the decision variables, including the number of shipments and shipment quantities. The results of numerical analyses showed an excellent performance of the provided method with respect to the optimality criteria like number of taken iterations, optimality error, infeasibility, and complementarity.
- 25 August 2019
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 8 (2) , 119-131
An integrated stochastic EPQ model under quality and green policies: generalised cross decomposition under the separability approach
In this paper, a bi-objective multi-product constrained and integrated economic production quantity model is designed by considering the quality control and green production policies. The aforementioned model comes with stochastic constraints. Moreover, to create a kind of green approach policy, tax cost of greenhouse gas emissions and limitations are considered. The aim of this study is to optimise the total inventory cost and the total profit, while the stochastic constraints are satisfied. Due to the inconsistency of objectives, an Lp-metric function is utilised to integrate and achieve a single objective function. Therefore, the mathematical formulation of the problem is bi-objective stochastic mixed integer nonlinear programming large scale and hard to solve. Accordingly, generalised cross decomposition under the separability approach is utilised as an effective algorithm for global optimisation. Moreover, sensitivity analysis revealed that increasing the cost function weight versus decreasing the profit function weight leads to the change rate of the integrated-objective function becomes positive with a steep slope.
- 25 August 2019
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 8 (2) , 119-131
An integrated stochastic EPQ model under quality and green policies: generalised cross decomposition under the separability approach
In this paper, a bi-objective multi-product constrained and integrated economic production quantity model is designed by considering the quality control and green production policies. The aforementioned model comes with stochastic constraints. Moreover, to create a kind of green approach policy, tax cost of greenhouse gas emissions and limitations are considered. The aim of this study is to optimise the total inventory cost and the total profit, while the stochastic constraints are satisfied. Due to the inconsistency of objectives, an Lp-metric function is utilised to integrate and achieve a single objective function. Therefore, the mathematical formulation of the problem is bi-objective stochastic mixed integer nonlinear programming large scale and hard to solve. Accordingly, generalised cross decomposition under the separability approach is utilised as an effective algorithm for global optimisation. Moreover, sensitivity analysis revealed that increasing the cost function weight versus decreasing the profit function weight leads to the change rate of the integrated-objective function becomes positive with a steep slope.
- Top Cited Papers
- 1 May 2019
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 69, 223-254
An integrated multi-product, multi-buyer supply chain under penalty, green, and quality control polices and a vendor managed inventory with consignment stock agreement: The outer approximation with equality relaxation and augmented penalty algorithm
- 1 May 2019
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 69, 223-254
Top Cited PapersAn integrated multi-product, multi-buyer supply chain under penalty, green, and quality control polices and a vendor managed inventory with consignment stock agreement: The outer approximation with equality relaxation and augmented penalty algorithm
- 27 February 2019
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 7 (4) , 309-325
Joint Economic Lot-sizing in Multi-product Multi-level Integrated Supply Chains: Generalized Benders Decomposition
Joint Economic Lot-sizing Problems (JELPs) have received a great deal of attention in recent years because they are the bedrock of pushing forward the frontiers of knowledge in supply chain (SC). JELP can manage efficiently SC through promoting cooperation among the levels of the SC. In this paper, we deal with JELP in the context of the integrated four-level SC in order to minimise the total inventory cost. The model is multi-product and considers raw material replenishment. Real stochastic constraints, including space limitation, procurement cost, ordering, and joint economic lot-size limitations can make the model more applicable for real-world SCs. The objectives are both to determine the joint economic lot-sizing policy and the optimum period length such that the total inventory cost of the SC is minimised, while the stochastic constraints are satisfied. Mathematical formulation of the problem is stochastic, MINLP, large scale and hard to solve. In this regard, we utilised Generalised Benders Decomposition (GBD) in order to minimise the MINLP model of research. The results of numerical examples and sensitivity analysis illustrate that proposed method has satisfactory performance in optimum solution, number of taken iterations, the dual infeasibility, constraint violation, and the complementarity.
- 27 February 2019
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 7 (4) , 309-325
Joint Economic Lot-sizing in Multi-product Multi-level Integrated Supply Chains: Generalized Benders Decomposition
Joint Economic Lot-sizing Problems (JELPs) have received a great deal of attention in recent years because they are the bedrock of pushing forward the frontiers of knowledge in supply chain (SC). JELP can manage efficiently SC through promoting cooperation among the levels of the SC. In this paper, we deal with JELP in the context of the integrated four-level SC in order to minimise the total inventory cost. The model is multi-product and considers raw material replenishment. Real stochastic constraints, including space limitation, procurement cost, ordering, and joint economic lot-size limitations can make the model more applicable for real-world SCs. The objectives are both to determine the joint economic lot-sizing policy and the optimum period length such that the total inventory cost of the SC is minimised, while the stochastic constraints are satisfied. Mathematical formulation of the problem is stochastic, MINLP, large scale and hard to solve. In this regard, we utilised Generalised Benders Decomposition (GBD) in order to minimise the MINLP model of research. The results of numerical examples and sensitivity analysis illustrate that proposed method has satisfactory performance in optimum solution, number of taken iterations, the dual infeasibility, constraint violation, and the complementarity.
- 4 February 2019
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 7 (3) , 262-274
Modelling And optimal lot-sizing of the replenishments in constrained, multi-product and bi-objective EPQ models with defective products: Generalised Cross Decomposition
The optimal lot-sizing of the replenishments has a cumulative effect on practical Economic Production Quantity (EPQ) models with the aim of inventory system management. In this paper, an EPQ model of the replenishment is proposed by taking into account the real-world conditions. A bi-objective inventory model is designed in order to minimise the total inventory cost and to maximise the profit, simultaneously. Realistic and practical stochastic constraints are imposed on the procurement cost, the screening cost, the disposal cost, and the space cost. The objective of the present study is to optimise the lot-sizing of the replenishment, while the stochastic constraints are satisfied and the optimum number of lots and optimum volume of each lot are calculated. Responding to the inconsistency of objective functions, an Lp-metric method is utilised to integrate and gain a single objective function. The mathematical formulation of the model is stochastic, Mix Integer Nonlinear Programming (MINLP), large-scale and hard to solve. In this regards, Generalised Cross Decomposition (GCD) is utilised to optimise the MINLP model of this research. The results of numerical examples and sensitivity analyses give us a complete insight into the applicability and accuracy of the suggested model and the solution method.
- 4 February 2019
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 7 (3) , 262-274
Modelling And optimal lot-sizing of the replenishments in constrained, multi-product and bi-objective EPQ models with defective products: Generalised Cross Decomposition
The optimal lot-sizing of the replenishments has a cumulative effect on practical Economic Production Quantity (EPQ) models with the aim of inventory system management. In this paper, an EPQ model of the replenishment is proposed by taking into account the real-world conditions. A bi-objective inventory model is designed in order to minimise the total inventory cost and to maximise the profit, simultaneously. Realistic and practical stochastic constraints are imposed on the procurement cost, the screening cost, the disposal cost, and the space cost. The objective of the present study is to optimise the lot-sizing of the replenishment, while the stochastic constraints are satisfied and the optimum number of lots and optimum volume of each lot are calculated. Responding to the inconsistency of objective functions, an Lp-metric method is utilised to integrate and gain a single objective function. The mathematical formulation of the model is stochastic, Mix Integer Nonlinear Programming (MINLP), large-scale and hard to solve. In this regards, Generalised Cross Decomposition (GCD) is utilised to optimise the MINLP model of this research. The results of numerical examples and sensitivity analyses give us a complete insight into the applicability and accuracy of the suggested model and the solution method.
- 9 February 2018
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 6 (3) , 237-257
Modelling and optimal lot-sizing of integrated multi-level multi-wholesaler supply chains under the shortage and limited warehouse space: generalised outer approximation
Optimal lot-sizing policy in supply chain (SC) has an important role in companies applying SC management to their system. An excellent lot-sizing policy will control and manage the inventory costs of SCs. By managing lot sizes in the SCs, companies become capable of bringing down additional costs and delivering extra value to the consumers. In this paper, a multi-product, multi-wholesaler, multi-level, and integrated SC under the shortage and the limited warehouse space is modelled. In this model, there are some real stochastic constraints. The objectives are both, to determine the optimum number of lots and the optimum lot volumes in order to minimise the total cost of SC, while the stochastic constraints are satisfied. All of the products are single-stage and the shortage is allowed for products in each one of the chain levels. Resources follow normal distributions with known means and variances. The model is mixed integer nonlinear programming (MINLP) type, large-scale and hard to solve. In this regard, generalised outer approximation based on decomposition principles, outer-approximation, and relaxation is utilised to optimise the MINLP model of research. The results and analyses demonstrate that proposed algorithm has excellence and acceptable performance.
- 9 February 2018
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 6 (3) , 237-257
Modelling and optimal lot-sizing of integrated multi-level multi-wholesaler supply chains under the shortage and limited warehouse space: generalised outer approximation
Optimal lot-sizing policy in supply chain (SC) has an important role in companies applying SC management to their system. An excellent lot-sizing policy will control and manage the inventory costs of SCs. By managing lot sizes in the SCs, companies become capable of bringing down additional costs and delivering extra value to the consumers. In this paper, a multi-product, multi-wholesaler, multi-level, and integrated SC under the shortage and the limited warehouse space is modelled. In this model, there are some real stochastic constraints. The objectives are both, to determine the optimum number of lots and the optimum lot volumes in order to minimise the total cost of SC, while the stochastic constraints are satisfied. All of the products are single-stage and the shortage is allowed for products in each one of the chain levels. Resources follow normal distributions with known means and variances. The model is mixed integer nonlinear programming (MINLP) type, large-scale and hard to solve. In this regard, generalised outer approximation based on decomposition principles, outer-approximation, and relaxation is utilised to optimise the MINLP model of research. The results and analyses demonstrate that proposed algorithm has excellence and acceptable performance.
- 1 September 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (9) , 6907-6914
Preparation and Characterization of MWCNT-Graft-PCA-Pt Electrode Fabricated by Electrospray Deposition Method for Proton Exchange Membrane Fuel Cell
In this paper, the development and application of a novel carbon nanotube/Polycitric acid (MWCNT-Graft-PCA-Pt) nanocomposite as an efficient nanocatalyst for PEM fuel cell is reported. Covalent attachment to PCA agents is the main method for the modification of CNTs with polymers. By this method electrocatalysts with a narrow particle-size distribution and good dispersion have been produced. Carbon nanotube (CNT) film electrodes have been fabricated by a novel process involving the electrostatic spray deposition (ESD) of a CNT solution. The CNT film electrodes have shown well-entangled and interconnected porous structures with good adherence to the substrate. Cyclic voltammograms (CV) of catalysts using the spongy thin layer electrode technique were obtained for the catalysts surface at evaluation and for Methanol Oxidation reaction (MOR). CV results have demonstrated that the current density and MOR activity of the MWCNT-Graft-PCA-Pt is respectively higher than of the MWCNT-Pt nanocatalyst.
- 1 September 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (9) , 6907-6914
Preparation and Characterization of MWCNT-Graft-PCA-Pt Electrode Fabricated by Electrospray Deposition Method for Proton Exchange Membrane Fuel Cell
In this paper, the development and application of a novel carbon nanotube/Polycitric acid (MWCNT-Graft-PCA-Pt) nanocomposite as an efficient nanocatalyst for PEM fuel cell is reported. Covalent attachment to PCA agents is the main method for the modification of CNTs with polymers. By this method electrocatalysts with a narrow particle-size distribution and good dispersion have been produced. Carbon nanotube (CNT) film electrodes have been fabricated by a novel process involving the electrostatic spray deposition (ESD) of a CNT solution. The CNT film electrodes have shown well-entangled and interconnected porous structures with good adherence to the substrate. Cyclic voltammograms (CV) of catalysts using the spongy thin layer electrode technique were obtained for the catalysts surface at evaluation and for Methanol Oxidation reaction (MOR). CV results have demonstrated that the current density and MOR activity of the MWCNT-Graft-PCA-Pt is respectively higher than of the MWCNT-Pt nanocatalyst.