YYYingting Yi

Yingting Yi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yingting Yi has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dual-Tuned Terahertz Absorption Device Based on Vanadium Dioxide Phase Transition Properties

    by Ruyuan Zheng, Yingting Yi, Qianju Song, Zao Yi, Yougen Yi, Shubo Cheng, Jianguo Zhang, Chaojun Tang, Tangyou Sun, Qingdong Zeng

    In recent years, absorbers related to metamaterials have been heavily investigated. In particular, VO2 materials have received focused attention, and a large number of researchers have aimed at multilayer structures. This paper presents a new concept of a three-layer simple structure with VO2 as the base, silicon dioxide as the dielectric layer, and graphene as the top layer. When VO2 is in the insulated state, the absorber is in the closed state, Δf = 1.18 THz (absorption greater than 0.9); when VO2 is in the metallic state, the absorber is open, Δf = 4.4 THz (absorption greater than 0.9), with ultra-broadband absorption. As a result of the absorption mode conversion, a phenomenon occurs with this absorber, with total transmission and total reflection occurring at 2.4 THz (A = 99.45% or 0.29%) and 6.5 THz (A = 90% or 0.24%) for different modes. Due to this absorption property, the absorber is able to achieve full-transmission and full-absorption transitions at specific frequencies. The device has great potential for applications in terahertz absorption, terahertz switching, and terahertz modulation.


  • Open Access

    Photonic Crystal Fiber Based on Surface Plasmon Resonance Used for Two Parameter Sensing for Magnetic Field and Temperature

    by Tiantian Dai, Yingting Yi, Zao Yi, Yongjian Tang, Yougen Yi, Shubo Cheng, Zhiqiang Hao, Chaojun Tang, Pinghui Wu, Qingdong Zeng

    This paper presents a photonic crystal fiber (PCF) sensor that can be used to measure the temperature and magnetic field simultaneously, and to monitor the changes in them in the environment. When we designed the fiber structure, two circular channels of the same size were added to the fiber to facilitate the subsequent addition of materials. A gold film is added to the upper channel (ch1), and the channel is filled with a magnetic fluid (MF). The sensor can reflect changes in the temperature and magnetic field strength. The two channels containing MF and PDMS in the proposed fiber are called ch1 and ch2. The structure, mode and properties (temperature and magnetic field) were analyzed and discussed using the finite element method. By using the control variable method, the influence of Ta2O5 or no Ta2O5, the Ta2O5 thickness, the diameter of the special air hole, the distance from the fiber core and the distance between them in the displacement of the loss spectrum and the phase-matching condition of the coupling mode were studied. The resulting maximum temperature sensitivity is 6.3 nm/°C (SPR peak 5), and the maximum magnetic field sensitivity is 40 nm/Oe (SPR peak 4). Because the sensor can respond to temperature and magnetic field changes in the environment, it can play an important role in special environmental monitoring, industrial production and other fields.


  • Open Access

    Design of a Far-Infrared Broadband Metamaterial Absorber with High Absorption and Ultra-Broadband

    by Tao Xu, Yingting Yi, Qianju Song, Zao Yi, Yougen Yi, Shubo Cheng, Jianguo Zhang, Chaojun Tang, Tangyou Sun, Qingdong Zeng

    We designed a metamaterial far-infrared absorber based on an MDM (metal–dielectric–metal) structure. We made a hollow crossed Ti microstructure at the top of the absorber. It is known that the coupling effect of equipartitional exciton resonance and intrinsic absorption at the surface of the depleting material has a strong influence on the absorber. Based on this, we investigated the absorption characteristics of the absorber using the Finite Difference in Time Domain (FDTD) theory. The results show that the absorber absorbed more than 90% of the light within a bandwidth of 12.01 μm. The absorber has an average absorption of 94.08% in the longwave infrared (LWIR) to ultra-longwave infrared (UWIR) bands (10.90–22.91 μm). The polarization insensitivity of the designed absorber is demonstrated by analyzing the absorption spectra of the absorber at different polarization angles. By adjusting the relevant geometric parameters, the absorption spectrum can be independently adjusted. Furthermore, the absorber exhibits good incidence angle insensitivity in both transverse electric (TE) and transverse magnetic (TM) modes. The absorbers are simple and easy to configure for applications such as optical cloaking, infrared heat emitters, and photodetectors. These advantages will greatly benefit the application of absorbers in practice.


  • Open Access

    Simulation and Analysis of a Near-Perfect Solar Absorber Based on SiO2-Ti Cascade Optical Cavity

    by Peng Chen, Yingting Yi, Qianju Song, Zao Yi, Yougen Yi, Shubo Cheng, Jianguo Zhang, Chaojun Tang, Tangyou Sun, Qingdong Zeng

    The main development direction for current solar technology is to improve absorption efficiency and stability. To bridge this gap, we design in this paper a structure consisting of two multilayer disc stacks of different radii, one topped by a TiO2 disc and the other by a cascade disc stack composed of SiO2-Ti, for use in thermal emitters and solar absorbers. The innovation of our work is the exploitation of multiple Fabry–Perot resonances in SiO2-Ti cascade optical cavities to develop absorber bandwidths while investigating it in the field of thermal emission and many aspects affecting the efficiency of the absorber. The finite difference time domain method (FDTD) results show absorption averages as high as 96.68% with an absorption bandwidth of 2445 nm (A > 90%) at 280 nm–3000 nm solar incidence and even higher weighted averages as high as 98.48% at 1.5 solar air mass (AM) illumination. In order to investigate the physical mechanisms of our designed absorber in a high absorption state, we analyzed the electric field distributions of its four absorption peaks and concluded that its high absorption is mainly caused by the coupling of multiple Fabry–Perot resonance modes in the cascaded optical cavity. While considering this high efficiency, we also investigated the effect of complex environments such as extreme high temperatures and changes in the angle of incidence of the absorber, and the results show that the thermal radiation efficiency of the emitter is 96.79% at an operating temperature of 1700 K, which is higher than its thermal radiation efficiency of 96.38% at an operating temperature of 1500 K, which is a perfect result. On the other hand, we conclude that the designed structure is independent of polarization, while the absorber still has 88.22% absorption at incidence angles of up to 60°, both in transverse electric (TE) and transverse magnetic (TM) modes. The results of this study can help improve the performance of future solar absorbers and expand their application areas.


  • Top Cited Papers
    Open Access

    High Absorptivity and Ultra-Wideband Solar Absorber Based on Ti-Al2O3 Cross Elliptical Disk Arrays

    by Yuanjian Zhang, Yingting Yi, Wenxin Li, Shiri Liang, Jing Ma, Shubo Cheng, Wenxing Yang, Yougen Yi

    Perfect metamaterial absorbers have attracted researchers’ attention in solar energy harvesting and utilization. An ideal solar absorber should provide high absorption, be ultra-wideband, and be insensitive to polarization and incident angles, which brings challenges to research. In this paper, we proposed and optimized an ultra-wideband solar absorber based on Ti-Al2O3 cross elliptical disk arrays to obtain the ultra-wideband absorption of solar energy. The addition of a cavity greatly improves the energy-absorbing effect in the operating band, which has research value. The absorption spectrum and field distribution were analyzed by the finite difference time domain method. For the physical mechanism, the electric and magnetic field distribution indicates that ultra-wideband absorption is caused by propagation surface plasmon resonance (SPR), localized SPR and Fabry–Perot (F-P) resonance excited between Ti and Al2O3 disks. The results demonstrate that the absorption bandwidth with the absorption rate beyond 90% reaches 1380 nm (385–1765 nm), and the average absorption reaches an astonishing 98.78%. The absorption bandwidth matches the main radiation bandwidth of the solar energy, which is approximately 295–2500 nm according to the data from the literature, and the total thickness of the structure is only 445 nm. Moreover, the ultra-wideband solar absorber is insensitive to the polarization angle and oblique incidence angle. The proposed ultra-wideband solar absorber has research and application value in solar energy harvesting, photothermal conversion and utilization.


  • Open Access

    Simulated Performance of a Broadband Solar Absorber Composed of Sectioned Au Disk Structures and ZnS/Au Thin Layers

    by Gang Tao, Yingting Yi, Mengxuan Zang, Zhipeng Zheng, Yougen Yi

    Solar energy is considered an essential source of energy because of cleanliness and ubiquity. However, how to effectively absorb solar energy within the range of solar radiation is an urgent problem to be solved. The design of high-performance broadband perfect absorbers is an important way to collect solar energy efficiently. In this paper, we propose a novel broadband solar energy absorber based on zinc sulfide (ZnS). It is a three-layer (Au-ZnS-Au) structure with new types of sectioned disks employed in the top layer. The sectioned disks can enhance the absorption efficiency. Surface plasmon polariton (SPP) and electric dipole resonance increase the absorption of light, so the proposed absorber can achieve broadband perfect absorption. Simulation by a finite element analysis (COMSOL) method shows that absorption with a bandwidth of 354 THz from 430 THz–784 THz has been achieved, and the average absorption is 95%. This indicates that the perfect absorption range of the proposed absorber is 78.7% of the visible range. The perfect absorber has four perfect absorption peaks, which can reach a maximum absorption rate of 99.9%. In addition, our absorber is polarization insensitive due to the design of the rotational symmetry structure of the sectioned disks. The absorber is composed of refractory metals so that it can work under actual solar radiation and high-temperature conditions. The proposed solar energy absorber is important for many applications such as solar cells, thermal photovoltaic technology, and sensing.


  • Open Access

    A Tunable “Ancient Coin”-Type Perfect Absorber with High Refractive Index Sensitivity and Good Angular Polarization Tolerance

    by Hao Luo, Qianyi Shangguan, Yinting Yi, Shubo Cheng, Yougen Yi, Zhizhong Li

    In this paper, we design and present a graphene-based “ancient coin”-type dual-band perfect metamaterial absorber, which is composed of a silver layer, silicon dioxide layer, and a top “ancient coin” graphene layer. The absorption performance of the absorber is affected by the hollowed-out square in the center of the graphene layer and geometric parameters of the remaining nano disk. The optical properties of graphene can be changed by adjusting the voltage, to control the absorption performance of the absorber dynamically. In addition, the centrally symmetric pattern structure greatly eliminates the polarization angle dependence of our proposed absorber, and it exhibits good angular polarization tolerance. Furthermore, the proposed “ancient coin”-type absorber shows great application potential as a sensor or detector in biopharmaceutical, optical imaging, and other fields due to its strong tunability and high refractive index sensitivity.


  • A four-band perfect absorber based on high quality factor and high figure of merit of monolayer molybdenum disulfide

    by Li-Ying Jiang, Ying-Ting Yi, Zao Yi, Hua Yang, Zhi-You Li, Ju Su, Zi-Gang Zhou, Xi-Fang Chen, You-Gen Yi

    采用时域有限差分方法从理论和数值上提出了一种基于临界耦合和导模共振的单层二硫化钼的四波段完美吸收器, 通过阻抗匹配和耦合模理论可以更好地分析其物理机理. 单层二硫化钼被放置在二氧化硅与具有周期性长方体空气槽结构的二维聚甲基丙烯酸甲酯层中间. 利用导向共振的临界耦合原理得到了单层二硫化钼的高效光吸收, 即在共振波长(λ1 = 510.0 nm, λ2 = 518.8 nm, λ3 = 565.9 nm, λ4 = 600.3 nm)获得了4个共振完美吸收峰, 吸收率分别为99.03%, 98.10%, 97.30%和95.41%, 同时平均吸收率在可见光光谱范围高达97.46%, 是裸单层二硫化钼的12倍以上. 从模拟结果来看, 调节结构的几何参数可以来控制单层二硫化钼的共振波长的范围, 这对提高单层二硫化钼的吸收强度和选择性具有重要的现实意义. 利用临界耦合来增强光-二氧化硅相互作用的新思想也可以应用于其他原子级薄材料. 同时, 本文也讨论了吸收器的传感性能, 发现传感器的最高品质因子、灵敏度与品质因数最高分别为1294.1, 155.1 nm/RIU和436. 这些结果表明, 所设计的结构可能为改善二维过渡金属二元化合物中的光-物质相互作用开辟有前景的技术, 并在波长选择性光致发光和光电探测中有着极好的应用前景.