Ji-Jon Sit
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ji-Jon Sit has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
R. Sarpeshkar
Massachusetts Institute of Technology
4 shared publicationsC.D. Salthouse
Massachusetts Institute of Technology
3 shared publicationsM.W. Baker
Massachusetts Institute of Technology
3 shared publicationsRahul Sarpeshkar
Massachusetts Institute of Technology
3 shared publicationsT.K.-T. Lu
Res. Lab. of Electron., Massachusetts Inst. of Technol., Cambridge, MA, USA
3 shared publications- Guangyin Feng
South China University of Technology
2 shared publications
Latest Publications
- 10 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (7) , 5733-5743
An Injection-Locked Wireless Power Transfer Transmitter With Automatic Maximum Efficiency Tracking
This paper presents a closed-loop transmitter for wireless power transfer with automatic resonance frequency tracking to maintain high power transfer efficiency in the over-coupled region. The transmitter consists of a source oscillator, power amplifier (PA), PA driver, matching network, and feedback circuitry. By injecting the resonant output of coupled antenna coils into a source oscillator to form a positive feedback loop, the source oscillator is injection-locked and the closed-loop transmitter functions as a power oscillator with the oscillation frequency determined by the resonance of the coupled coils. The proposed resonant frequency tracking minimizes the change in the input impedance presented to the PA, and hence mitigates mismatch that causes a sharp drop in the PA efficiency of conventional transmitters. Implemented in 0.13μm BCD (Bipolar-CMOS-DMOS) technology, the prototype maintains PA efficiency above 60% even at highly over-coupled spacings (10mm), which is significantly below the critical coupling spacing (40mm). Compared to a transmitter without feedback (i.e. running in open loop), the transfer efficiency at a charging distance of 10mm is improved by 6.6 times and the charging range with power transfer efficiency over 50% is also doubled.
- 10 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (7) , 5733-5743
An Injection-Locked Wireless Power Transfer Transmitter With Automatic Maximum Efficiency Tracking
This paper presents a closed-loop transmitter for wireless power transfer with automatic resonance frequency tracking to maintain high power transfer efficiency in the over-coupled region. The transmitter consists of a source oscillator, power amplifier (PA), PA driver, matching network, and feedback circuitry. By injecting the resonant output of coupled antenna coils into a source oscillator to form a positive feedback loop, the source oscillator is injection-locked and the closed-loop transmitter functions as a power oscillator with the oscillation frequency determined by the resonance of the coupled coils. The proposed resonant frequency tracking minimizes the change in the input impedance presented to the PA, and hence mitigates mismatch that causes a sharp drop in the PA efficiency of conventional transmitters. Implemented in 0.13μm BCD (Bipolar-CMOS-DMOS) technology, the prototype maintains PA efficiency above 60% even at highly over-coupled spacings (10mm), which is significantly below the critical coupling spacing (40mm). Compared to a transmitter without feedback (i.e. running in open loop), the transfer efficiency at a charging distance of 10mm is improved by 6.6 times and the charging range with power transfer efficiency over 50% is also doubled.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Injection-Locked Power Oscillator for Resonance Frequency Tracking in Wireless Power Transfer
This paper presents a transmitter architecture for wireless power transfer with automatic resonance frequency tracking to maintain high efficiency over wide variations of antenna distance. By injection-locking the source oscillator to the output resonance in a positive feedback loop, the closed-loop transmitter functions as a power oscillator with the oscillation frequency determined by the most dominant resonance in the coupled antennas. We show that this frequency tracking minimizes the change in input impedance presented to the power amplifier (PA), and hence mitigates mismatch that can cause a sharp non-linear drop in PA efficiency. The power oscillator was tested well above and below critical coupling, and maintained PA efficiency above 60 % even when highly over-coupled at 25 % spacing (10mm/40mm) below critical coupling. Compared to an open-loop system, the charging range with efficiency over 50 % is doubled.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Injection-Locked Power Oscillator for Resonance Frequency Tracking in Wireless Power Transfer
This paper presents a transmitter architecture for wireless power transfer with automatic resonance frequency tracking to maintain high efficiency over wide variations of antenna distance. By injection-locking the source oscillator to the output resonance in a positive feedback loop, the closed-loop transmitter functions as a power oscillator with the oscillation frequency determined by the most dominant resonance in the coupled antennas. We show that this frequency tracking minimizes the change in input impedance presented to the power amplifier (PA), and hence mitigates mismatch that can cause a sharp non-linear drop in PA efficiency. The power oscillator was tested well above and below critical coupling, and maintained PA efficiency above 60 % even when highly over-coupled at 25 % spacing (10mm/40mm) below critical coupling. Compared to an open-loop system, the charging range with efficiency over 50 % is doubled.
- 16 January 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Pervasive Computing
- Vol. 7 (1) , 40-48
A Cochlear-Implant Processor for Encoding Music and Lowering Stimulation Power
Cochlear implants (CIs), or bionic ears, restore hearing in profoundly deaf (greater than -90 dB hearing loss) patients. They function by transforming frequency patterns in sound into corresponding spatial electrode-stimulation patterns for the auditory nerve. Over the past 20 years, improvements in sound-processing strategies, in the number of electrodes and channels, and in the rate of stimulation have yielded improved sentence and word recognition scores in patients. Next- generation implants will be fully implanted inside the patient's body. Consequently, power consumption requirements for signal processing will be very stringent.
- 16 January 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Pervasive Computing
- Vol. 7 (1) , 40-48
A Cochlear-Implant Processor for Encoding Music and Lowering Stimulation Power
Cochlear implants (CIs), or bionic ears, restore hearing in profoundly deaf (greater than -90 dB hearing loss) patients. They function by transforming frequency patterns in sound into corresponding spatial electrode-stimulation patterns for the auditory nerve. Over the past 20 years, improvements in sound-processing strategies, in the number of electrodes and channels, and in the rate of stimulation have yielded improved sentence and word recognition scores in patients. Next- generation implants will be fully implanted inside the patient's body. Consequently, power consumption requirements for signal processing will be very stringent.
- Top Cited Papers
- 1 September 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 1 (3) , 172-183
A Low-Power Blocking-Capacitor-Free Charge-Balanced Electrode-Stimulator Chip With Less Than 6 nA DC Error for 1-mA Full-Scale Stimulation
Large dc blocking capacitors are a bottleneck in reducing the size and cost of neural implants. We describe an electrode-stimulator chip that removes the need for large dc blocking capacitors in neural implants by achieving precise charge-balanced stimulation with <6 nA of dc error. For cochlear implant patients, this is well below the industry's safety limit of 25 nA. Charge balance is achieved by dynamic current balancing to reduce the mismatch between the positive and negative phases of current to 0.4%, followed by a shorting phase of at least 1 ms between current pulses to further reduce the charge error. On +6 and -9 V rails in a 0.7-mum AMI high voltage process, the power consumption of a single channel of this chip is 47 muW when biasing power is shared by 16 channels.
- 1 September 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 1 (3) , 172-183
Top Cited PapersA Low-Power Blocking-Capacitor-Free Charge-Balanced Electrode-Stimulator Chip With Less Than 6 nA DC Error for 1-mA Full-Scale Stimulation
Large dc blocking capacitors are a bottleneck in reducing the size and cost of neural implants. We describe an electrode-stimulator chip that removes the need for large dc blocking capacitors in neural implants by achieving precise charge-balanced stimulation with <6 nA of dc error. For cochlear implant patients, this is well below the industry's safety limit of 25 nA. Charge balance is achieved by dynamic current balancing to reduce the mismatch between the positive and negative phases of current to 0.4%, followed by a shorting phase of at least 1 ms between current pulses to further reduce the charge error. On +6 and -9 V rails in a 0.7-mum AMI high voltage process, the power consumption of a single channel of this chip is 47 muW when biasing power is shared by 16 channels.
- 19 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 54 (1) , 138-149
A Low-Power Asynchronous Interleaved Sampling Algorithm for Cochlear Implants That Encodes Envelope and Phase Information
Cochlear implants currently fail to convey phase information, which is important for perceiving music, tonal languages, and for hearing in noisy environments. We propose a bio-inspired asynchronous interleaved sampling (AIS) algorithm that encodes both envelope and phase information, in a manner that may be suitable for delivery to cochlear implant users. Like standard continuous interleaved sampling (CIS) strategies, AIS naturally meets the interleaved-firing requirement, which is to stimulate only one electrode at a time, minimizing electrode interactions. The majority of interspike intervals are distributed over 1-4 ms, thus staying within the absolute refractory limit of neurons, and form a more natural, pseudostochastic pattern of firing due to complex channel interactions. Stronger channels are selected to fire more often but the strategy ensures that weaker channels are selected to fire in proportion to their signal strength as well. The resulting stimulation rates are considerably lower than those of most modern implants, saving power yet delivering higher potential performance. Correlations with original sounds were found to be significantly higher in AIS reconstructions than in signal reconstructions using only envelope information. Two perceptual tests on normal-hearing listeners verified that the reconstructed signals enabled better melody and speech recognition in noise than those processed using tone-excited envelope-vocoder simulations of cochlear implant processing. Thus, our strategy could potentially save power and improve hearing performance in cochlear implant users
- 19 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 54 (1) , 138-149
A Low-Power Asynchronous Interleaved Sampling Algorithm for Cochlear Implants That Encodes Envelope and Phase Information
Cochlear implants currently fail to convey phase information, which is important for perceiving music, tonal languages, and for hearing in noisy environments. We propose a bio-inspired asynchronous interleaved sampling (AIS) algorithm that encodes both envelope and phase information, in a manner that may be suitable for delivery to cochlear implant users. Like standard continuous interleaved sampling (CIS) strategies, AIS naturally meets the interleaved-firing requirement, which is to stimulate only one electrode at a time, minimizing electrode interactions. The majority of interspike intervals are distributed over 1-4 ms, thus staying within the absolute refractory limit of neurons, and form a more natural, pseudostochastic pattern of firing due to complex channel interactions. Stronger channels are selected to fire more often but the strategy ensures that weaker channels are selected to fire in proportion to their signal strength as well. The resulting stimulation rates are considerably lower than those of most modern implants, saving power yet delivering higher potential performance. Correlations with original sounds were found to be significantly higher in AIS reconstructions than in signal reconstructions using only envelope information. Two perceptual tests on normal-hearing listeners verified that the reconstructed signals enabled better melody and speech recognition in noise than those processed using tone-excited envelope-vocoder simulations of cochlear implant processing. Thus, our strategy could potentially save power and improve hearing performance in cochlear implant users
- 30 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 78-79
An analog bionic ear processor with zero-crossing detection
- 30 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 78-79
An analog bionic ear processor with zero-crossing detection
- 27 July 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2164-2167
Biasing techniques for subthreshold MOS resistive grids
- 27 July 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2164-2167
Biasing techniques for subthreshold MOS resistive grids
- 21 March 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 52 (4) , 711-727
An Ultra-Low-Power Programmable Analog Bionic Ear Processor
We report a programmable analog bionic ear (cochlear implant) processor in a 1.5-/spl mu/m BiCMOS technology with a power consumption of 211 /spl mu/W and 77-dB dynamic range of operation. The 9.58 mm/spl times/9.23 mm processor chip runs on a 2.8 V supply and has a power consumption that is lower than state-of-the-art analog-to-digital (A/D)-then-DSP designs by a factor of 25. It is suitable for use in fully implanted cochlear-implant systems of the future which require decades of operation on a 100-mAh rechargeable battery with a finite number of charge-discharge cycles. It may also be used as an ultra-low-power spectrum-analysis front end in portable speech-recognition systems. The power consumption of the processor includes the 100 /spl mu/W power consumption of a JFET-buffered electret microphone and an associated on-chip microphone front end. An automatic gain control circuit compresses the 77-dB input dynamic range into a narrower internal dynamic range (IDR) of 57 dB at which each of the 16 spectral channels of the processor operate. The output bits of the processor are scanned and reported off chip in a format suitable for continuous-interleaved-sampling stimulation of electrodes. Power-supply-immune biasing circuits ensure robust operation of the processor in the high-RF-noise environment typical of cochlear implant systems.
- 21 March 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 52 (4) , 711-727
An Ultra-Low-Power Programmable Analog Bionic Ear Processor
We report a programmable analog bionic ear (cochlear implant) processor in a 1.5-/spl mu/m BiCMOS technology with a power consumption of 211 /spl mu/W and 77-dB dynamic range of operation. The 9.58 mm/spl times/9.23 mm processor chip runs on a 2.8 V supply and has a power consumption that is lower than state-of-the-art analog-to-digital (A/D)-then-DSP designs by a factor of 25. It is suitable for use in fully implanted cochlear-implant systems of the future which require decades of operation on a 100-mAh rechargeable battery with a finite number of charge-discharge cycles. It may also be used as an ultra-low-power spectrum-analysis front end in portable speech-recognition systems. The power consumption of the processor includes the 100 /spl mu/W power consumption of a JFET-buffered electret microphone and an associated on-chip microphone front end. An automatic gain control circuit compresses the 77-dB input dynamic range into a narrower internal dynamic range (IDR) of 57 dB at which each of the 16 spectral channels of the processor operate. The output bits of the processor are scanned and reported off chip in a format suitable for continuous-interleaved-sampling stimulation of electrodes. Power-supply-immune biasing circuits ensure robust operation of the processor in the high-RF-noise environment typical of cochlear implant systems.
- 3 February 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 521-526
A 16-channel analog VLSI processor for bionic ears and speech-recognition front ends
- 3 February 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 521-526
A 16-channel analog VLSI processor for bionic ears and speech-recognition front ends
- 4 November 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 41
A micropower analog VLSI processing channel for bionic ears and speech-recognition front ends
Next-generation bionic ears or cochlear implants will be fully implanted inside the body of the patient and consequently have very stringent requirements on the power consumption used for signal processing. We describe a low-power programmable analog VLSI processing channel that implements bandpass filtering, envelope detection, logarithmic mapping and analog-to-digital conversion. A bionic ear processor may be implemented through the use of several such parallel channels. In a proof-of-concept 1.5 /spl mu/m AMI MOSIS implementation, the most power-hungry channel of our system (7.5 kHz center frequency) consumed 7.8 /spl mu/W of power, had an internal dynamic range (IDR) of 51 dB, and provided 64 discriminable levels of loudness per channel. Such numbers already satisfy the requirements of today's commercial bionic ear processors and can lower the power consumption of even advanced DSP processing schemes of the future by an order of magnitude. Our processing channel is also well suited for use in low power speech recognition front ends, which commonly require the same sequence of operations in cepstrum-like front ends. Future improvements in the interfaces between the various stages of our processing channel, which were not optimized in this implementation, promise a potential internal dynamic range of more than 60 dB with little or no increase in power.
- 4 November 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 41
A micropower analog VLSI processing channel for bionic ears and speech-recognition front ends
Next-generation bionic ears or cochlear implants will be fully implanted inside the body of the patient and consequently have very stringent requirements on the power consumption used for signal processing. We describe a low-power programmable analog VLSI processing channel that implements bandpass filtering, envelope detection, logarithmic mapping and analog-to-digital conversion. A bionic ear processor may be implemented through the use of several such parallel channels. In a proof-of-concept 1.5 /spl mu/m AMI MOSIS implementation, the most power-hungry channel of our system (7.5 kHz center frequency) consumed 7.8 /spl mu/W of power, had an internal dynamic range (IDR) of 51 dB, and provided 64 discriminable levels of loudness per channel. Such numbers already satisfy the requirements of today's commercial bionic ear processors and can lower the power consumption of even advanced DSP processing schemes of the future by an order of magnitude. Our processing channel is also well suited for use in low power speech recognition front ends, which commonly require the same sequence of operations in cepstrum-like front ends. Future improvements in the interfaces between the various stages of our processing channel, which were not optimized in this implementation, promise a potential internal dynamic range of more than 60 dB with little or no increase in power.