Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anand M. Hunashyal has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dynamic Mechanical Analysis and Optimization of Vibration Damping in Epoxy-Based Nano Cement Composite Dampers for Sustainable Structures

    by Sandhya R. Jalgar, Anand M. Hunashyal, U. Satisha Prabhu, B. M. Gurumurthy, Pavan Hiremath, Nithesh Naik

    Traditional cement-based materials often fall short in delivering both high mechanical strength and effective vibration damping. Although nano-modified composites have shown promise, a gap remains in understanding the interaction between nanofillers and polymeric phases in epoxy-based cement systems. This study investigates the development of epoxy-based cement composite dampers with enhanced mechanical strength and vibration damping for structural applications. The composite integrates nano-SiO2 and graphene to improve the energy dissipation, structural integrity, and long-term performance. A comprehensive experimental and mathematical modeling approach was employed to evaluate the storage modulus, loss modulus, and damping factor (tan δ) using Dynamic Mechanical Analysis (DMA). The results indicated that incorporating 2.0 wt.% nano-SiO2 and 0.05 wt.% graphene leads to an optimum increase in both mechanical and damping properties, achieving a 92% enhancement in compressive strength and a 38% improvement in damping factor compared to conventional cement composites. Beyond this optimal composition, agglomeration effects reduce the reinforcement efficiency. Microstructural investigations using TEM and EDX confirmed the homogeneous dispersion of the nanofillers, leading to enhanced matrix densification and improved interfacial bonding. A validated mathematical model was proposed to predict viscoelastic behavior, correlating well with experimental findings. These results highlight the potential of epoxy-based cement composites for high-performance damping applications in sustainable infrastructures.


  • Open Access

    Investigation of Nano-Composite Dampers Using Different Nanomaterials in Civil Engineering Structures: A Review

    by Sandhya. R. Jalgar, Anand M. Hunashyal, Roopa A. Kuri, Madhumati. S. Dhaduti, Shridhar N. Mathad

    Civil engineering structures need to be protected from earthquakes, representing a new area of research that is growing continuously and very rapidly. Design engineers are always searching for lightweight, stronger, and stiffer materials to be applied as vibration-damping materials. Stability in dynamics necessitates an active, robust, and convenient mechanism that can absorb the kinetic energy of vibration to prevent the structural system from resonance. Recently, many researchers have successfully used nanomaterials to develop energy-absorbing materials that are lightweight and cost-effective. Traditional damping treatments are based on combinations of viscoelastic, elastomeric, magnetic, and piezoelectric materials. In this paper, a review of various damping techniques for composites made of cement modified by various nanomaterials like Nano Al2O3 (Aluminum Dioxide), Nano SiO2 (Silicon Dioxide), Nano TiO2 (Titanium Dioxide), Graphene, and CNTs (Carbon Nanotubes) is presented. The designs of various nano-composite dampers are presented to strengthen the information progress in this field. The current study’s goal is to discover how nanoparticles impact the cement-based material’s damping properties. The study examined several nanomaterials in cement composites at differing concentrations. With the help of the Dynamic Mechanical Analysis (DMA) method and the Logarithmic Decrement approach, the damping properties of these composites were examined. Scanning Electron Microscopy (SEM) was used to examine the effects of nanomaterials on the microstructure and pore size distribution of the composite. Increasing the quantity of nanoparticles in cement paste may improve its capacity to lessen vibration. The experiments also showed that certain nanomaterials may improve load transmission inside the cement matrix and connect neighboring hydration products, helping to reduce energy loss during the loading process. These nanoparticles will eventually replace the large machinery employed to dampen vibrations in buildings due to their small weight, increased mechanical strength, and effective damping properties.


  • Open Access

    Correction: Roopa et al. Development and Implementation of Cement-Based Nanocomposite Sensors for Structural Health Monitoring Applications: Laboratory Investigations and Way Forward. Sustainability 2022, 14, 12452

    by A. K. Roopa, A. M. Hunashyal, Rahila Rehamani M. Mysore

    The authors would like to make the following corrections about the published paper


  • Open Access

    Development and Implementation of Cement-Based Nanocomposite Sensors for Structural Health Monitoring Applications: Laboratory Investigations and Way Forward

    by A. K. Roopa, A. M. Hunashyal, Rahila Rehamani M. Mysore

    Recent advances in material science and self-sensing technology have enabled the development of cement-based nanocomposite sensors that detect the damage on their own by exhibiting piezoelectric properties corresponding to the response of the structures. The present study involves the development and implementation of these sensors in the structural components and monitors the response by correlating the piezoelectric properties of the sensors with the stress-strain response to identify the potential damage. For this purpose, the carbon fiber (CF) and multiwalled carbon nanotubes (MWCNT) are used as nanofiller in the cementitious matrix to develop the self-sensing sensors. These sensors possess high strength, large elastic modulus, and piezo resistivity properties, which make them promising smart sensor materials for structural health monitoring applications. Two example applications involving the beam and column as the structural components are used for the experimentation. After embedding the sensors into the structural components, the response is evaluated in the form of resistance versus load. The self-sensing sensor is capable of detecting the nanostructural cracks during the loading of the system. Based on the severity of loading, the resistivity will indicate the damage state of the structural component which helps in deciding the suitable retrofitting strategies for the maintenance of the structural component to elongate the service life of the structures. The developed sensors also possess good mechanical and electrical properties and hence they have promising characteristics for real-time health monitoring applications.


  • Open Access

    Nanoceramic Composites for Nuclear Radiation Attenuation

    by Shankar A. Hallad, Nagaraj R. Banapurmath, Avinash S. Bhadrakali, Arun Y. Patil, Anand M. Hunashyal, Sharanabasava V. Ganachari, T. M. Yunus Khan, Irfan Anjum Badruddin, Manzoore Elahi M. Soudagar, Sarfaraz Kamangar

    The development of radiation attenuation materials with lean cross-sections is the need of the hour. However, the inherent threat of radiations accompanying these processes is of major concern. Thus, in an attempt to shield unnecessary radiations, several novel materials have been fabricated alongside the conventional materials available. Yet, there is a need for cost-effective, efficient shielding materials that have good mechanical strength and effective shielding properties. The present work investigates ceramic composite behaviors and radiation shielding capacity reinforced with lead oxide nano-powder. Developed nano-lead-based cement composites were subjected to mechanical tests to determine flexural and compressive strengths to check their suitability for structural applications. Further, the gamma attenuation test of the composites was conducted to determine their neutron absorption capacity. The addition of nano-leadoxide in the control beams was varied from 0.7 to 0.95 and 1 wt.% of the ceramic matrix. The percentage of nano-leadoxide that gives the best results in both enhanced properties and economic aspects was determined to be 0.6 wt.% of the cement.


  • Open Access

    Statistical Analysis of Polymer Nanocomposites for Mechanical Properties

    by Shankar A. Hallad, N. R. Banapurmath, T. M. Yunus Khan, M. A. Umarfarooq, Manzoore Elahi M. Soudagar, Anand M. Hunashyal, Sandeep V. Gujjar, Jayachandra S. Yaradoddi, Sharanabasava V. Ganachari, Ashraf Elfasakhany, et al.

    Epoxy resins, due to their high stiffness, ease of processing, good heat, and chemical resistance obtained from cross-linked structures, have found applications in electronics, adhesives coatings, industrial tooling, and aeronautic and automotive industries. These resins are inherently brittle, which has limited their further application. The emphasis of this study is to improve the properties of the epoxy resin with a low-concentration (up to 0.4% by weight) addition of Multi-Walled Carbon Nanotubes (MWCNTs). Mechanical characterization of the modified composites was conducted to study the effect of MWCNTs infusion in the epoxy resin. Nanocomposites samples showed significantly higher tensile strength and fracture toughness compared to pure epoxy samples. The morphological studies of the modified composites were studied using Scanning Electron Microscopy (SEM).