MHMohammed Jasim M. Hassan

Mohammed Jasim M. Hassan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohammed Jasim M. Hassan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study the Corrosion Inhibition on the Iraqi Fuel Tanks using Cefoperazone Drug

    by Akram Mohsin Kadhim, Rana Afif Anaee, Mohammed Jasim M. Hassan, Munaf Adnan Idan Al-Lami

    Corrosion is one of the most important problems that face the petroleum industry, both production and refining, and cause damage to petroleum equipment, tanks, and transmission lines, and increasing maintenance costs. in this study , was adding six concentrations of the drug expired Cefoperzone (Exp CEF) (50, 100, 200, 300, 400, and 500 ppm) to a Simulated Oil Well Water (SOWW), the inhibitive role of (Exp CEF) drug was investigated to Reduce the corrosion risk of carbon steel. Four different temperatures were used to conduct electrochemical tests (303, 313, 323 and 333 K) to achieve the study. The study was then supported by an examination of the inhibited surface using field emission scanning electron microscopy with energy dispersive (FESEM) and (AFM). The results indicated occurring the inhibition by an anodic inhibitor that controls the dissolution of iron from steel gave the highest inhibition efficiency (IE%) by adding 500 ppm, while the calculation of polarization resistance (Rp) gave the highest resistance by 400 ppm through adsorption the added drug to show flakes shaped structures with decreasing surface roughness (Ra ) from 307.1 to 83.15 after inhibition. The calculation of adsorption isotherm confirmed the obeying of Langmuir adsorption isotherm by giving the coefficient of linear regression was about one in the range of 0.999 > R^2 > 0.995, with the spontaneous adsorption that estimated from the negative values of 〖∆H〗_ads^o and variation in the type of adsorption to be physically or chemically according to the added concentration because of the differential sign of 〖∆H〗_ads^o . The sign of 〖∆H〗_ads^o was positive that reflecting the increase in randomness at the metal/solution interface.


  • Open Access

    Batch and flow injection spectrophotometric methods for determination of Ceftazidime in pharmaceutical formulations

    by Huda Abdulkareem, Mohammed Jasim M Hassan

    تم وصف تقنيتين طيفيتين لقياس كمية السيفتازيديم (CFT) في الأدوية والتركيبات الصيدلانية. فهي بسيطة وحساسة وانتقائية ودقيقة وفعالة. يستخدم الأسلوب الأول وسيطًا قلويًا لتحويل السيفتازيديم إلى ملح الديازونيوم ، والذي يتم دمجه بعد ذلك مع كواشف1-Naphthol (1-NPT) و2)2-Naphthol-NPT). تم إنتاج صبغة الآزو باللونين البني والأحمر ، مع كثافة امتصاص تصل إلى ƛmax 585nm and max 545nm ، على التوالي. تم اتباع قانون بير من حيث مدى التركيز (3-40) لـ (CFT-1-NPT) و (CFT-2 NPT) ، كانت حدود الكشف 1.0096 and 0.8017 g.ml-1على التوالي ، وكانت الامتصاصية المولية 0.7926×104 and 0.5466×104 L.mol1cm-1. 0تُستخدم طريقة تحليل حقن التدفق (FIA) لتقدير السيفتازيديم وتسجيل القياسات باستخدام نهج الأشعة فوق البنفسجية المرئية في الإجراء الثاني. يسمح حقن التدفق بتقدير دقيق للعقار في ظل ظروف تجريبية مثالية. كانت التركيزات في نطاق(3-50) لـ (CFT-1-NPT) و (CFT-2-NPT) ، وكانت حدود الكشف0.8102, 1.2809g.ml-1 . ، والامتصاصية المولية 0.9565×104 ,0.7106×104 L.mol-1. cm-1, على التوالي تم استخدام الأسلوبين المقترحين لتقدير السيفتازيديم في المستحضرات الصيدلانية بنجاح حيث تميزت هذه الطريقة بالبساطة والسرعة والدقة والتكلفة المنخفضة.


  • Spectrophotometric estimation of Ceftazidime via batch MethodandFlow injection analysis

    by Icc Icc, Huda Abdulkarim, Mohammed Jasim Hassan

    Simple, rapid, and sensitive spectrophotometric technique has been developed for the estimation of ceftazidime (CFT) in pure form and pharmaceutical preparation. The first technique depends on the conversion of NH2 in ceftazidime to diazanium salt of ceftazidime and coupled with the 1-Hydroxy-2- naphthalicacid reagent in alkaline medium with a molar absorptivity of 1.01115×104 L.mol-1.cm-1 and a detection limit of 0.63978µg/ml.The violet-colored product showed up at ƛmax 574nm and followed Beer's law over a concentration range of 3-40µg/ml. The diazotization of the investigated drug (ceftazidime) and its interaction with 1-HNA was investigated via a newly advanced flow injection (FLA) technique based on the detection of dye–azo salt absorption at ƛmax 574 nm. The concentrations ranged from 5 to 50 µg/ml. By comparing the proposed methods to previous studies, it was determined that they were compatible with appreciating ceftazidime in pharmaceuticals

  • A review of Recent Advances in The Estimation of Pharmaceutical Products Using Hydrophilic Interaction Chromatography (HILIC) Technology

    by Ayad Kadhim Fadhil, Ashraf Saad Rasheed, Mohammed Jasim M. Hassan, International Marshes Research Center

    Liquid Chromatography as a separation tool has made significant strides in a systematic study. The most widely used chromatographic process is reverse-phase liquid chromatography (RPLC), which uses polar mobile and hydrophobic stationary phases. However, specific polar composites are challenging to study using this approach. Normal-phase liquid chromatography (NPLC) is another separation process that uses polar stationary phase and organic eluents. When analyzing polar compounds, NPLC produces asymmetric chromatographic peak forms and low-efficiency separations. HILIC is a promising alternative approach for polar compound analysis. HILIC is a separation process that blends the stationary phases of the NPLC method with the mobile phase of the RPLC technique. Hydrophilic interaction liquid chromatography (HILIC) was used to separate small molecules, medicinal compounds, metabolites, contaminants, sugars, peptides, oligosaccharides, proteins, and amino acids, among other liquid chromatographic separations. Tiny polar composites can be efficiently separated on polar stationary phases using HILIC. The target of the study was to look at the different ways to characterize HILIC stationary phases and how they can be used to separate polar compounds in complex matrices. Since processes other than hydrophilic partitioning may exist, the features of the hydrophilic stationary phase may influence in some situations, restricting the selections of ion intensity, mobile phase construction, and buffer pH value available. Increasing our knowledge of HILIC retention activity broadens the range of liquid chromatography applications. HILIC systems bio uses are also discussed. This paper gives a broad description of how HILIC has been used in pharmaceutical testing in various sample matrices, including plasma, pharmaceutical dosage forms, environmental samples, serum, plant origin samples, and animal origin samples. This study also reflects on the most modern and a selection of papers in pharmaceutical science from 1991 to the suggestion deadline in 2020, which deal with examining various mechanisms using HILIC.


  • Open Access

    Quantification of ketoprofen in film-coated tablets using hydrophilic interaction liquid chromatography-Ultraviolet spectrometry

    by Ali Amer Waheb, Ashraf S. Rasheed, Mohammed J. M. Hassan

    A simple zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC) method was developed and applied to film-coated tablets to determine ketoprofen. Separation was performed using gradient elution with a mixture of acetonitrile and acetate buffer at an Ultraviolet (UV) detection wavelength of 255 nm on self-constructed ZIC-HILIC-1 and ZIC-HILIC-4 columns. The hydrophilicity of ketoprofen was validated by examining its behaviour with varied acetate buffer, acetonitrile proportions, and pH values. The mechanism of separation is based on ketoprofen partitioning in the hydrophobic interaction. The two available approaches are a viable alternative to the present ketoprofen separation methods. The developed ZIC-HILIC methods had an excellent precision (0.61%), linear ranges of 0.05-10 ppm, and detection limits of 0.01-0.008 ppm with a coefficient of 0.9995 0.9997 for the ZIC-HILIC-1 and ZIC-HILIC-4 columns, respectively. The methods' findings were compared to the British Pharmacopoeia procedure using statistical testing, which revealed no difference in accuracy between the methods.

  • Spectrophotometric Determination Methyldopa and Salbutamol by Oxidative Coupling, Cloud Point and Flow Injection in Pharmaceutical Formulations

    by Nisreen Kais Abood, Mohammed Jasim M Hassan, Amy Muneer A Al-Da

    TThree methods study in this research simple, sensitive, an expensive and rapid Oxidative Coupling reaction, Cloud Point Extraction and Flow Injection spectrophotometric methods for determination Methyldopa and Salbutamol, the first method oxidative coupling reaction between the Methyldopa and thiosemicarbazide in presence of ferric nitrate anhydrous to yield dark green colored product that have absorbance at λ max 460 nm. Salbutamol coupling reaction with 4-nitrophenyl hydrazine in presence the potassium Iodide and sodium hydroxide to product the violet colored has absorbance at λ max 530 nm. Beer’s law is obeyed from (1-50) µg/ mL with sandall’s sensitivity (0.039,0.073), correlation coefficient (0.9998) and molar absorptivity (0.536×104,0.327×104) for Methyldopa and Salbutamol respectively. The secondly method to estimation the trace amount of phenolic drugs that product from the oxidative coupling reaction it is cloud point extraction, cloud point extraction enables the drugs to be precisely estimated under the optimal experimental conditions, the maximum absorption at λ max (470,535) nm respectively. The concentration was range (0.25-6) µg/mL, molar absorptivity 0.510×105 ,0.483×105 and enrichment factor (9.51,14.72) respectively for Methyldopa and Salbutamol.Flow injection analysis is simple method to determination the phenolic is based on the measurement of absorption signal for product resulting from oxidative coupling reaction , study all experimental parameters chemical and physical to development and stability the colored of product .Total flow injection of 1.5mL/min was pumped and active material was detect at λ max (460,530)nm respectively for Methyldopa and Salbutamol . In this the proposed methods were suxciffuly, applied to the determination Methyldopa and Salbutamol in pharmaceutical preparation.


  • Open Access

    New Spectrophotometric Estimation and Cloud Point Extraction of Cefdinir

    by Mohammed Jasim M. Hassan, Omar Qusay Mizher

    A sensitive spectrophotometric method was developed for the estimation of cefdinir (CFD), a cephalosporin species. This study involves two methods, and the first method includes the preparing of azo dye by the reaction of CFD diazonium salt with 4-Tert-Butylphenol (4-TBP) and 2-Naphthol (2-NPT) in alkaline medium, which shows colored dyes measured at λmax 490 and 535 nm, respectively. Beer's law was obeyed along the concentration range of (3-100) μg.ml-1. The limits of detection were 0.246, 0.447 μg.ml-1 and molar absorptivities were 0.6129×104, 0.3361×104 L.mol-1cm-1 for (CFD-4-TBP) and (CFD-2-NPT), respectively. The second method includes preconcentration for cefdinir dyes by using cloud point extraction in the presence of Triton X-114 (10% v/v) and recording measurements using the UV-Visible technique. Cloud point extraction enables the drug to be precisely estimated under the optimal experimental conditions. The concentrations were ranged between (0.1-6.0) and (0.2-6.0) μg.ml-1. The limits of detection were 0.032, 0.054 μg.ml-1 and molar absorptivities were 0.4733×105, 0.2788×105 L.mol-1cm-1, respectively. Enrichment factors were 24.61, 24.58, and distribution coefficients were 1526, 1393 for (CFD-4-TBP), (CFD-2-NPT), respectively. The proposed methods have been applied for the determination of CFD in commercial formulation with no interference. The results appear to be no significant difference between the two methods.


  • Open Access

    Batch and flow injection spectrophotometric methods for the determination of barbituric acid in aqueous samples via oxidative coupling with 4-aminoantipyrine

    by Mohammed Jasim M. Hassan, Wijdan Shakir Khayoon, Shrouq Abdul-Fatah Hasssan

    A batch and flow injection (FI) spectrophotometric methods are described for the determination of barbituric acid in aqueous and urine samples. The method is based on the oxidative coupling reaction of barbituric acid with 4-aminoantipyrine and potassium iodate to form purple water soluble stable product at λ 510 nm. Good linearity for both methods was obtained ranging from 2 to 60 μg mL−1, 5–100 μg mL−1 for batch and FI techniques, respectively. The limit of detection (signal/noise = 3) of 0.45 μg mL−1 for batch method and 0.48 μg mL−1 for FI analysis was obtained. The proposed methods were applied successfully for the determination of barbituric acid in tap water, river water, and urine samples with good recoveries of 99.92% and 100.67% for batch and FI method, respectively