Yevheniia Marchyshyna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yevheniia Marchyshyna has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Yuliya Kryzhova
National University of Life and Environmental Sciences of Ukraine, Faculty of Food Technology and Quality Control of Agricultural Products, Department of Technology of meat, fish and marine products, Polkovnika Potekhina Str., 16, 03040, Kyiv, Ukraine, Tel.:+38(093)0370077
4 shared publications - Yaroslav Rudyk
National University of Life and Environmental Sciences of Ukraine
3 shared publications - Alina Menchynska
National University of Life and Environmental Sciences of Ukraine, Faculty of Food Technology and Quality Control of Agricultural Products, Department of Technologies of Meat, Fish and Marine Products, Vystavkova Str., 16, 03041, Kyiv, Ukraine, Tel.: +380976583888
2 shared publications - Alina Omelian
National University of Life and Environmental Sciences of Ukraine
2 shared publications - Anastasiia Ivaniuta
National University of Life and Environmental Sciences of Ukraine
2 shared publications - Larysa V. Shevchenko
National University of Life and Environmental Sciences of Ukraine
2 shared publications
Latest Publications
- Open Access
- 22 March 2026
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 34 (1) , 315-325
INFLUENCE OF RIP-ENING TIME ON THE FATTY ACIDS PROFILE AND LIPID QUALITY OF SOFT CHEESES MADE FROM UNPASTEURISED GOAT`S MILK
Expanding the range of artisanal soft cheeses made from unpasteurised goat's milk on the food market meets consumer demand for healthy nutrition and requires the development of criteria for assessing their quality, biological value, age, and authenticity. This involves determining the dynamics of their fatty acid composition and the quality of milk fat during the ripening process. The experiment used artisanal brine Feta cheese with a ripening period of 30 months and artisanal Chevre cheese with white noble mould with a ripening period of 40 days, made at one of the eco-enterprises of the Kyiv region (Ukraine). The study was conducted from May 2022 to December 2024 using gas chromatography. 15 fatty acids were detected in Feta and Chevre cheeses, of which 11 were saturated and 4 were unsaturated. The basis of saturated fatty acids in Chevre and Feta cheeses was palmitic, stearic, capric, and myristic. The proportion of oleic acid in Feta cheese was inversely correlated with the ripening period (r = –0.920 ± 0.074, P < 0.001). The value of ω3/ω6 PUFA during the ripening period varied for Feta cheese within the range of 1 : 4.96–5.74 and for Chevre cheese – 1 : 4.47–43.16. A distinctive feature of Chevre cheese was an increase in the content of linolenic acid by 0.88–0.94% and linoleic acid by 0.73–1.21% on the 40th day of ripening. According to fat quality indicators, Feta cheese was characterized by the highest dietary properties from the 7th day to the 18th month of ripening, and cheese Chevre - on the 40th day of ripening. The fatty acid profile of artisanal goat cheeses Feta and Chevre can be used as one of the criteria for assessing their age and authenticity in combination with physicochemical and microbiological indicators.
- 22 March 2026
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 34 (1) , 315-325
Open AccessINFLUENCE OF RIP-ENING TIME ON THE FATTY ACIDS PROFILE AND LIPID QUALITY OF SOFT CHEESES MADE FROM UNPASTEURISED GOAT`S MILK
Expanding the range of artisanal soft cheeses made from unpasteurised goat's milk on the food market meets consumer demand for healthy nutrition and requires the development of criteria for assessing their quality, biological value, age, and authenticity. This involves determining the dynamics of their fatty acid composition and the quality of milk fat during the ripening process. The experiment used artisanal brine Feta cheese with a ripening period of 30 months and artisanal Chevre cheese with white noble mould with a ripening period of 40 days, made at one of the eco-enterprises of the Kyiv region (Ukraine). The study was conducted from May 2022 to December 2024 using gas chromatography. 15 fatty acids were detected in Feta and Chevre cheeses, of which 11 were saturated and 4 were unsaturated. The basis of saturated fatty acids in Chevre and Feta cheeses was palmitic, stearic, capric, and myristic. The proportion of oleic acid in Feta cheese was inversely correlated with the ripening period (r = –0.920 ± 0.074, P < 0.001). The value of ω3/ω6 PUFA during the ripening period varied for Feta cheese within the range of 1 : 4.96–5.74 and for Chevre cheese – 1 : 4.47–43.16. A distinctive feature of Chevre cheese was an increase in the content of linolenic acid by 0.88–0.94% and linoleic acid by 0.73–1.21% on the 40th day of ripening. According to fat quality indicators, Feta cheese was characterized by the highest dietary properties from the 7th day to the 18th month of ripening, and cheese Chevre - on the 40th day of ripening. The fatty acid profile of artisanal goat cheeses Feta and Chevre can be used as one of the criteria for assessing their age and authenticity in combination with physicochemical and microbiological indicators.
- Open Access
- 31 October 2025
- Published by Mendel University Press in Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
- Vol. 73 (4-5) , 243-252
INFLUENCE OF AGING TIME ON THE PHYSICOCHEMICAL CHARACTERISTICS OF CRAFT SOFT CHEESES MADE FROM UNPASTEURIZED GOAT'S MILK
The expansion of craft cheese production from unpasteurized goat milk as health food products in the Ukrainian market requires the development of criteria for their quality and authenticity during ripening. The study aimed to determine the eff...
- 31 October 2025
- Published by Mendel University Press in Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
- Vol. 73 (4-5) , 243-252
Open AccessINFLUENCE OF AGING TIME ON THE PHYSICOCHEMICAL CHARACTERISTICS OF CRAFT SOFT CHEESES MADE FROM UNPASTEURIZED GOAT'S MILK
The expansion of craft cheese production from unpasteurized goat milk as health food products in the Ukrainian market requires the development of criteria for their quality and authenticity during ripening. The study aimed to determine the eff...
- Open Access
- 24 September 2025
- Published by HACCP Consulting in Scifood
- Vol. 19, 520-536
Susceptibility of microflora to antibacterial drugs at different stages of hard rennet cheese production
The research aimed to analyze the susceptibility of milk microflora isolated at different stages of hard rennet cheese production and its evaluation. The susceptibility to antibacterial drugs of isolated cultures of bacteria Escherichia coli, Klebsiella pneumoniae, and Acinetobacter baumannii, which were found in the finished product, was determined. For each study, 15 samples of bacterial cultures were selected, and the experiment was conducted in triplicate. A total of 180 bacterial culture samples were examined. The disk diffusion method was used to determine the susceptibility of bacteria to antibacterial drugs. Studies of the resistance of bacteria isolated at different stages of hard rennet cheese “Ukrainian” production showed that the final product contains Escherichia coli, Klebsiella pneumoniae, and Acinetobacter baumannii resistant to certain antibacterial drugs, which may pose a health threat to consumers. Among the microflora isolated from raw milk, Escherichia coli was resistant to fluoroquinolones, penicillins, cephalosporins, tetracyclines, aminoglycosides, trimethoprim, and fosfomycin. In the normalized mixture, Escherichia coli was resistant to gentamicin and amikacin and moderately resistant to doxycycline. After pasteurization, Escherichia coli was susceptible to ciprofloxacin and resistant to all other tested antibacterial drugs. Resistance to gentamicin and amikacin, as well as moderate resistance to doxycycline, was maintained at almost every stage of production and in the final product. After pasteurization, these bacteria isolated from the brine became resistant to most antibacterial drugs, except for ciprofloxacin, gentamicin, amikacin, and fosfomycin. Klebsiella pneumoniae, isolated from the brine, was resistant to ampicillin after its pasteurization. It was resistant to fosfomycin both before and after pasteurisation of the brine. The bacterium isolated from the finished cheese retained resistance to fosfomycin and ampicillin. Acinetobacter baumannii, isolated from both the raw milk and the final product, was resistant to cefotaxime. Moderate susceptibility to amikacin and fosfomycin was restored after cheese maturation.
- 24 September 2025
- Published by HACCP Consulting in Scifood
- Vol. 19, 520-536
Open AccessSusceptibility of microflora to antibacterial drugs at different stages of hard rennet cheese production
The research aimed to analyze the susceptibility of milk microflora isolated at different stages of hard rennet cheese production and its evaluation. The susceptibility to antibacterial drugs of isolated cultures of bacteria Escherichia coli, Klebsiella pneumoniae, and Acinetobacter baumannii, which were found in the finished product, was determined. For each study, 15 samples of bacterial cultures were selected, and the experiment was conducted in triplicate. A total of 180 bacterial culture samples were examined. The disk diffusion method was used to determine the susceptibility of bacteria to antibacterial drugs. Studies of the resistance of bacteria isolated at different stages of hard rennet cheese “Ukrainian” production showed that the final product contains Escherichia coli, Klebsiella pneumoniae, and Acinetobacter baumannii resistant to certain antibacterial drugs, which may pose a health threat to consumers. Among the microflora isolated from raw milk, Escherichia coli was resistant to fluoroquinolones, penicillins, cephalosporins, tetracyclines, aminoglycosides, trimethoprim, and fosfomycin. In the normalized mixture, Escherichia coli was resistant to gentamicin and amikacin and moderately resistant to doxycycline. After pasteurization, Escherichia coli was susceptible to ciprofloxacin and resistant to all other tested antibacterial drugs. Resistance to gentamicin and amikacin, as well as moderate resistance to doxycycline, was maintained at almost every stage of production and in the final product. After pasteurization, these bacteria isolated from the brine became resistant to most antibacterial drugs, except for ciprofloxacin, gentamicin, amikacin, and fosfomycin. Klebsiella pneumoniae, isolated from the brine, was resistant to ampicillin after its pasteurization. It was resistant to fosfomycin both before and after pasteurisation of the brine. The bacterium isolated from the finished cheese retained resistance to fosfomycin and ampicillin. Acinetobacter baumannii, isolated from both the raw milk and the final product, was resistant to cefotaxime. Moderate susceptibility to amikacin and fosfomycin was restored after cheese maturation.
- Open Access
- 27 August 2025
- Published by HACCP Consulting in Scifood
- Vol. 19, 484-500
Physicomechanical and drying properties of soybean seeds under low-temperature convective drying
The peculiarity of the soybean drying process is that it slowly releases moisture, making it easily damaged by mechanical movements. The soybean shell dries faster, with the surface quickly dehydrating, while the central part remains moist. Soybeans must be dried so that the rate of moisture evaporation from the surface of the grain does not exceed the rate of moisture movement from the centre of the grain to its surface. Soybeans contain more protein and fat compared to grains of other crops. The large amount of protein in soybeans creates favourable conditions for the development of mould fungi. Additionally, soybeans are highly hygroscopic. Therefore, it is relevant to conduct a study of the characteristics of soybean seeds. The primary objective is to optimize the low-temperature convective drying process of soybean seeds by analyzing their physicomechanical and thermophysical properties, as well as evaluating the impact of drying temperature on seed germination and quality. In particular, an analysis of physico-mechanical, thermophysical, heat and mass transfer, kinetic, and biochemical characteristics was carried out. In the article, alongside a review of the literature concerning the properties of soybean seeds by various authors, original research has also been conducted. These properties depend on the action of a complex of factors, including the temperature and humidity of the heat carrier, seed humidity, and other variables. Knowledge of these properties enables the drying process to be carried out effectively and to be intensified. The properties presented, based on both the findings of other authors and the author's research, provide an opportunity for a comprehensive assessment of these characteristics. The original research can be divided into three stages, aimed at determining the following properties of soybean seeds as a drying object: physico-mechanical, thermophysical, and heat and mass transfer properties. The heat and mass transfer characteristics are calculated based on physico-mechanical, thermophysical, and experimental studies of drying soybean seeds. Drying of soybean seeds is conducted under low-temperature conditions to preserve the quality characteristics of the material. Increasing the temperature from 40 to 60°C intensifies the drying process 2.125 times. The resulting soybean seeds exhibit a germination rate of 90–96%, which decreases with increasing temperature.
- 27 August 2025
- Published by HACCP Consulting in Scifood
- Vol. 19, 484-500
Open AccessPhysicomechanical and drying properties of soybean seeds under low-temperature convective drying
The peculiarity of the soybean drying process is that it slowly releases moisture, making it easily damaged by mechanical movements. The soybean shell dries faster, with the surface quickly dehydrating, while the central part remains moist. Soybeans must be dried so that the rate of moisture evaporation from the surface of the grain does not exceed the rate of moisture movement from the centre of the grain to its surface. Soybeans contain more protein and fat compared to grains of other crops. The large amount of protein in soybeans creates favourable conditions for the development of mould fungi. Additionally, soybeans are highly hygroscopic. Therefore, it is relevant to conduct a study of the characteristics of soybean seeds. The primary objective is to optimize the low-temperature convective drying process of soybean seeds by analyzing their physicomechanical and thermophysical properties, as well as evaluating the impact of drying temperature on seed germination and quality. In particular, an analysis of physico-mechanical, thermophysical, heat and mass transfer, kinetic, and biochemical characteristics was carried out. In the article, alongside a review of the literature concerning the properties of soybean seeds by various authors, original research has also been conducted. These properties depend on the action of a complex of factors, including the temperature and humidity of the heat carrier, seed humidity, and other variables. Knowledge of these properties enables the drying process to be carried out effectively and to be intensified. The properties presented, based on both the findings of other authors and the author's research, provide an opportunity for a comprehensive assessment of these characteristics. The original research can be divided into three stages, aimed at determining the following properties of soybean seeds as a drying object: physico-mechanical, thermophysical, and heat and mass transfer properties. The heat and mass transfer characteristics are calculated based on physico-mechanical, thermophysical, and experimental studies of drying soybean seeds. Drying of soybean seeds is conducted under low-temperature conditions to preserve the quality characteristics of the material. Increasing the temperature from 40 to 60°C intensifies the drying process 2.125 times. The resulting soybean seeds exhibit a germination rate of 90–96%, which decreases with increasing temperature.
- Open Access
- 28 August 2024
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 18, 776-791
The technology of cooking falafel with high biological value for vegans
The article presents the results of scientific research on the possibility of increasing the biological value of falafel dishes for vegans through the use of flax seeds and blueberry extract. Vegan nutrition analysis in Ukraine shows that dishes for this population group are mostly deficient in biologically active substances. One way to solve this problem is to develop dishes for vegans using raw plant materials with a high content of biologically active substances. The chemical composition of flax seeds and blueberry extract is analysed in terms of using these products for vegan cuisine. The feasibility of using flax seeds and blueberry extract to increase the biological value of the falafel vegan dish was proven. The feasibility of replacing vegetable oil and a fraction of wheat flour to optimise the vitamin-mineral composition of falafel was determined. Based on the organoleptic evaluation of the control and test samples, the optimal ratio of falafel ingredients was established: 2.5% dry blueberry extract and 7.5% flax seeds per 100 g of the dish. The falafel chemical composition with the addition of flax seeds and blueberry extract was studied compared to the control sample. According to the research results, the technology of cooking falafel for vegans with an increased content of biologically active substances was developed. Based on the data obtained, it can be concluded that the developed dish will enrich vegan nutrition with deficient biologically active substances. The social effectiveness of the developed technology of cooking falafel is to expand the range of vegan dishes. The developed dish can be recommended for the nutrition of fasting people. It is advisable to use the technology developed to cook falafel in restaurants.
- 28 August 2024
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 18, 776-791
Open AccessThe technology of cooking falafel with high biological value for vegans
The article presents the results of scientific research on the possibility of increasing the biological value of falafel dishes for vegans through the use of flax seeds and blueberry extract. Vegan nutrition analysis in Ukraine shows that dishes for this population group are mostly deficient in biologically active substances. One way to solve this problem is to develop dishes for vegans using raw plant materials with a high content of biologically active substances. The chemical composition of flax seeds and blueberry extract is analysed in terms of using these products for vegan cuisine. The feasibility of using flax seeds and blueberry extract to increase the biological value of the falafel vegan dish was proven. The feasibility of replacing vegetable oil and a fraction of wheat flour to optimise the vitamin-mineral composition of falafel was determined. Based on the organoleptic evaluation of the control and test samples, the optimal ratio of falafel ingredients was established: 2.5% dry blueberry extract and 7.5% flax seeds per 100 g of the dish. The falafel chemical composition with the addition of flax seeds and blueberry extract was studied compared to the control sample. According to the research results, the technology of cooking falafel for vegans with an increased content of biologically active substances was developed. Based on the data obtained, it can be concluded that the developed dish will enrich vegan nutrition with deficient biologically active substances. The social effectiveness of the developed technology of cooking falafel is to expand the range of vegan dishes. The developed dish can be recommended for the nutrition of fasting people. It is advisable to use the technology developed to cook falafel in restaurants.
- Open Access
- 1 June 2023
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 17, 444-454
Study of indicators of quality and safety of sour cream with vegetable oils
The article covers the quality and safety indicators of sour cream with vegetable oils, in the composition of which blended oil (sunflower oil + linseed oil) is used as a fat phase in the form of a food emulsion stabilized by an emulsifying complex containing sodium caseinate. According to the chemical composition, sour cream with vegetable oils is characterized by an increased content of the mass fraction of proteins by 0.2% and a reduced content of the mass fraction of carbohydrates by 1.7% compared to classic sour cream, which is connected with the use of food emulsion in its composition. Due to the content of food emulsion, sour cream with vegetable oils has the content of polyunsaturated fatty acids increased by 24 times and the content of saturated and monounsaturated fatty acids decreased by 82.11% and 41.2%, respectively, compared to classic sour cream. The indicator of water activity in sour cream with vegetable oils is 0.983 aw, which is lower than classic sour cream (0.988 aw). According to the results of the study of microbiological parameters, on the fifth day of storage in sour cream with vegetable oils, the titrated acidity index was 86 °Т, the number of lactic acid bacteria was 107 CFU/g, and no bacteria of the Escherichia coli group, mould and yeast were detected; it corresponds to the normalized indicators as for classic sour cream. At the end of the storage period, the value of syneresis in sour cream with vegetable oils is 23% lower than the value of syneresis in the control sample. In sour cream with vegetable oils, during five days of storage, the value of peroxide 3.0 – 4.0 ½ O mmol/k and acid value 2.5 – 2.6 mg acid number/g are within the normalized values for blended oil (sunflower oil + linseed oil).
- 1 June 2023
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 17, 444-454
Open AccessStudy of indicators of quality and safety of sour cream with vegetable oils
The article covers the quality and safety indicators of sour cream with vegetable oils, in the composition of which blended oil (sunflower oil + linseed oil) is used as a fat phase in the form of a food emulsion stabilized by an emulsifying complex containing sodium caseinate. According to the chemical composition, sour cream with vegetable oils is characterized by an increased content of the mass fraction of proteins by 0.2% and a reduced content of the mass fraction of carbohydrates by 1.7% compared to classic sour cream, which is connected with the use of food emulsion in its composition. Due to the content of food emulsion, sour cream with vegetable oils has the content of polyunsaturated fatty acids increased by 24 times and the content of saturated and monounsaturated fatty acids decreased by 82.11% and 41.2%, respectively, compared to classic sour cream. The indicator of water activity in sour cream with vegetable oils is 0.983 aw, which is lower than classic sour cream (0.988 aw). According to the results of the study of microbiological parameters, on the fifth day of storage in sour cream with vegetable oils, the titrated acidity index was 86 °Т, the number of lactic acid bacteria was 107 CFU/g, and no bacteria of the Escherichia coli group, mould and yeast were detected; it corresponds to the normalized indicators as for classic sour cream. At the end of the storage period, the value of syneresis in sour cream with vegetable oils is 23% lower than the value of syneresis in the control sample. In sour cream with vegetable oils, during five days of storage, the value of peroxide 3.0 – 4.0 ½ O mmol/k and acid value 2.5 – 2.6 mg acid number/g are within the normalized values for blended oil (sunflower oil + linseed oil).
- Open Access
- 6 July 2022
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 16, 356-366
Manifestation of living and post-slaughter traits of productivity in inbred and outbred bull calves of Ukrainian meat cattle breed
Selection in meat cattle herds requires caution due to the manifestation of inbred depression in traits that affect the economics of this livestock industry. This paper analyses the productivity of inbred and outbred bull calves of the Ukrainian meat cattle breed and justifies methods of pair selection in purebred herds with natural pairing. In bull calves, the growth of animals and traits of their meat productivity after slaughter were considered. Inbreeding was determined based on their pedigree. Inbred animals tended to have a growth rate of 10.2% from birth to 8 months of age. Afterwards, their average daily gain in live weight decreases sharply compared to outbred peers, who grow faster over a more extended period. From 8 to 18 months of age, it is probably (p >0.95) higher by 27.3% compared to inbred animals. Inbred bull calves have higher variability (Cv,%) in average daily gains. This indicates different adaptations to the environment during the suckling period and after weaning. Outbred animals tend to gain 2.3% of body weight at 12 months, 4.7 at 15 months, and 10.3% at 18 months. Its variability with age decreases by 7.4 points in inbred bull calves and 0.4 points in outbred ones, from 8 to 18 months. The inbred animals spent 29.5% more feed per kg of gain (p >0.95) than the outbred ones. Inbred bull calves vs outbred ones at 15 and 18 months of age tend to improve the expression of meat forms by 1.3 and 2.7%. They are relatively shorter and have a more rounded barrel. As a result, they have a shorter period of rapid growth. With the small size of the Ukrainian meat cattle population, one of the most important problems is reducing genetic variation in beef productivity traits and manifesting inbred depression in them. In purebred commercial herds, the mating of close animals should be avoided. To do this, an "order" for bulls should be made, and pairs should be selected without using inbreeding at different grades. Thus, outbred bull calves will reach live weight more quickly, spending less feed per growth unit, and have better basic slaughter traits.
- 6 July 2022
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 16, 356-366
Open AccessManifestation of living and post-slaughter traits of productivity in inbred and outbred bull calves of Ukrainian meat cattle breed
Selection in meat cattle herds requires caution due to the manifestation of inbred depression in traits that affect the economics of this livestock industry. This paper analyses the productivity of inbred and outbred bull calves of the Ukrainian meat cattle breed and justifies methods of pair selection in purebred herds with natural pairing. In bull calves, the growth of animals and traits of their meat productivity after slaughter were considered. Inbreeding was determined based on their pedigree. Inbred animals tended to have a growth rate of 10.2% from birth to 8 months of age. Afterwards, their average daily gain in live weight decreases sharply compared to outbred peers, who grow faster over a more extended period. From 8 to 18 months of age, it is probably (p >0.95) higher by 27.3% compared to inbred animals. Inbred bull calves have higher variability (Cv,%) in average daily gains. This indicates different adaptations to the environment during the suckling period and after weaning. Outbred animals tend to gain 2.3% of body weight at 12 months, 4.7 at 15 months, and 10.3% at 18 months. Its variability with age decreases by 7.4 points in inbred bull calves and 0.4 points in outbred ones, from 8 to 18 months. The inbred animals spent 29.5% more feed per kg of gain (p >0.95) than the outbred ones. Inbred bull calves vs outbred ones at 15 and 18 months of age tend to improve the expression of meat forms by 1.3 and 2.7%. They are relatively shorter and have a more rounded barrel. As a result, they have a shorter period of rapid growth. With the small size of the Ukrainian meat cattle population, one of the most important problems is reducing genetic variation in beef productivity traits and manifesting inbred depression in them. In purebred commercial herds, the mating of close animals should be avoided. To do this, an "order" for bulls should be made, and pairs should be selected without using inbreeding at different grades. Thus, outbred bull calves will reach live weight more quickly, spending less feed per growth unit, and have better basic slaughter traits.
- Open Access
- 10 March 2022
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 16, 114-126
Development and shelf-life assessment of soft-drink with honey
This scientific work describes research that aims to determine the physicochemical parameters of homogenized honey and its safety indicators based on the determination of toxic metals and radionuclides. A series of experimental studies were conducted to develop and study recipes for honey water based on different types of honey collected in the Lviv region of Ukraine, namely acacia, buckwheat, sunflower, coriander, goldenrod, linden, and weeds. According to the results of experiments, it was found that the studied honey meets all the requirements presented in the standard for natural honey. And the results obtained to determine the dry matter content and pH allowed to blend different types of honey and get honey drinks, which will expand the range of non-carbonated products, which is very popular, especially in summer, and drink this drink during the year. To prolong the shelf life of honey drinks, it is recommended to add citric acid in an amount of 1% by weight of the drink and sodium benzoate as a preservative in an amount of 0.1%. The quality of the obtained honey water samples was assessed using organoleptic evaluation and physicochemical parameters. The resulting beverages have good organoleptic characteristics and can be offered for products in the industry.
- 10 March 2022
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 16, 114-126
Open AccessDevelopment and shelf-life assessment of soft-drink with honey
This scientific work describes research that aims to determine the physicochemical parameters of homogenized honey and its safety indicators based on the determination of toxic metals and radionuclides. A series of experimental studies were conducted to develop and study recipes for honey water based on different types of honey collected in the Lviv region of Ukraine, namely acacia, buckwheat, sunflower, coriander, goldenrod, linden, and weeds. According to the results of experiments, it was found that the studied honey meets all the requirements presented in the standard for natural honey. And the results obtained to determine the dry matter content and pH allowed to blend different types of honey and get honey drinks, which will expand the range of non-carbonated products, which is very popular, especially in summer, and drink this drink during the year. To prolong the shelf life of honey drinks, it is recommended to add citric acid in an amount of 1% by weight of the drink and sodium benzoate as a preservative in an amount of 0.1%. The quality of the obtained honey water samples was assessed using organoleptic evaluation and physicochemical parameters. The resulting beverages have good organoleptic characteristics and can be offered for products in the industry.
- Open Access
- 13 July 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 639-647
The study of the productivity potential of grape varieties according to the indicators of functional activity of leaves
Photosynthetic activity in the leaf of ten grape varieties was studied in the conditions of the northern part of Forest-Steppe of Ukraine. From 2019 to 2020 meteorological data were recorded by the ‟Meteotrekˮ meteorological station. The influence of weather conditions of the spring-summer period at the beginning of the vegetation phases, which in 2019 took place on average 12 days earlier than in 2020, was noted. Analysis of changes in the induction of chlorophyll fluorescence (ICF) in leaves revealed the more efficient use of quantum energy of absorbed light by F0 in the leaves of most varieties was noted in the phase “the beginning of berry ripening”. During the three periods of the study, the varieties Aromatnyj, Zagadka, Ilichevskij rannij, and Kardishah showed a lower content of chlorophyll molecules, which do not have a functional connection with the reaction centers (RC). According to the Fp index the highest intensity of photosynthesis on average for all varieties was observed in the phase “the beginning of ovary growth”, the lowest – “the inflorescence is visible”. The potential productivity of grape plants determined by the ICF coefficient for all varieties was at a very high level and had a weak or moderate correlation with weather conditions during the growing season. The hydrothermal coefficient and Σ act t ≥10 °С had a weak effect on the efficiency of the light phase of photosynthesis (Ki) and a noticeable one (correlation coefficient r = 0.50 – 0.69) on the efficiency of dark photochemical processes (Rfd) in the leaves of most grape varieties.
- 13 July 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 639-647
Open AccessThe study of the productivity potential of grape varieties according to the indicators of functional activity of leaves
Photosynthetic activity in the leaf of ten grape varieties was studied in the conditions of the northern part of Forest-Steppe of Ukraine. From 2019 to 2020 meteorological data were recorded by the ‟Meteotrekˮ meteorological station. The influence of weather conditions of the spring-summer period at the beginning of the vegetation phases, which in 2019 took place on average 12 days earlier than in 2020, was noted. Analysis of changes in the induction of chlorophyll fluorescence (ICF) in leaves revealed the more efficient use of quantum energy of absorbed light by F0 in the leaves of most varieties was noted in the phase “the beginning of berry ripening”. During the three periods of the study, the varieties Aromatnyj, Zagadka, Ilichevskij rannij, and Kardishah showed a lower content of chlorophyll molecules, which do not have a functional connection with the reaction centers (RC). According to the Fp index the highest intensity of photosynthesis on average for all varieties was observed in the phase “the beginning of ovary growth”, the lowest – “the inflorescence is visible”. The potential productivity of grape plants determined by the ICF coefficient for all varieties was at a very high level and had a weak or moderate correlation with weather conditions during the growing season. The hydrothermal coefficient and Σ act t ≥10 °С had a weak effect on the efficiency of the light phase of photosynthesis (Ki) and a noticeable one (correlation coefficient r = 0.50 – 0.69) on the efficiency of dark photochemical processes (Rfd) in the leaves of most grape varieties.
- Open Access
- 28 June 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 546-554
The use of secondary fish raw materials from silver carp in the technology of structuring agents
The expediency and prospects of using secondary fish raw materials from silver carp in the structuring agents technology have been substantiated. The combination of secondary fish raw materials and seaweed with different mechanisms of gelation has a targeted effect on the organoleptic, structural-mechanical, and physicochemical properties of food products. Accordingly, the expediency of adding the Black Sea alga cystoseira (2%) to optimize the mineral composition of the structuring agents and increase their jelly-making properties was established. Using experimental studies and multicriteria optimization, the optimal ratio of secondary fish raw materials – 40%; water – 60% and rational heat treatment – 150 min, at a temperature of 85 – 100 °C has been determined. An analysis and comparison of various preservation methods have confirmed the expediency of using the freeze-drying method of drying fish broths for the production of structuring agents, which allows to preserve of the original properties of the product, biologically active substances, reduce the mass of the dried product and increase the shelf life of the structuring agents. The optimal storage conditions have been determined – the ready-made structuring agents were packed in three-layer paper kraft bags and stored in a cool dry place at a temperature of 22 ±2 °C and relative humidity of no more than 70% for 12 months. It was found that the physical and chemical indicators of the structuring agents depend on the features of the structure, amino acid composition of fish collagen. The presence of the overwhelming number of high-molecular-weight molecules in the composition of the structuring agents and the preservation of the native structure determine high indicators of dynamic viscosity, dissolution time, and strength. As a result of the research, it was revealed that the high protein content largely depends on the amount of collagen in the secondary fish raw material, which has a positive effect on the gelling properties of the product being created.
- 28 June 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 546-554
Open AccessThe use of secondary fish raw materials from silver carp in the technology of structuring agents
The expediency and prospects of using secondary fish raw materials from silver carp in the structuring agents technology have been substantiated. The combination of secondary fish raw materials and seaweed with different mechanisms of gelation has a targeted effect on the organoleptic, structural-mechanical, and physicochemical properties of food products. Accordingly, the expediency of adding the Black Sea alga cystoseira (2%) to optimize the mineral composition of the structuring agents and increase their jelly-making properties was established. Using experimental studies and multicriteria optimization, the optimal ratio of secondary fish raw materials – 40%; water – 60% and rational heat treatment – 150 min, at a temperature of 85 – 100 °C has been determined. An analysis and comparison of various preservation methods have confirmed the expediency of using the freeze-drying method of drying fish broths for the production of structuring agents, which allows to preserve of the original properties of the product, biologically active substances, reduce the mass of the dried product and increase the shelf life of the structuring agents. The optimal storage conditions have been determined – the ready-made structuring agents were packed in three-layer paper kraft bags and stored in a cool dry place at a temperature of 22 ±2 °C and relative humidity of no more than 70% for 12 months. It was found that the physical and chemical indicators of the structuring agents depend on the features of the structure, amino acid composition of fish collagen. The presence of the overwhelming number of high-molecular-weight molecules in the composition of the structuring agents and the preservation of the native structure determine high indicators of dynamic viscosity, dissolution time, and strength. As a result of the research, it was revealed that the high protein content largely depends on the amount of collagen in the secondary fish raw material, which has a positive effect on the gelling properties of the product being created.