Erica Doutel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Erica Doutel has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Joao B. L. M. Campos
CEFT—Transport Phenomena Research Center, Faculty of Engineering, University of Porto
9 shared publications - João Mário Miranda
CEFT—Transport Phenomena Research Centre, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
7 shared publications - João Carneiro
Transport Phenomena Research Center, Chemical Engineering Department, Faculty of Engineering, University of Porto, Porto, Portugal
6 shared publications - Sónia Isabel Silva Pinto
Engineering Faculty, University of Porto, Rua Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal
2 shared publications - Andreia Quinteiro
Polytechnic University of Coimbra, Rua da Misericórdia, Lagar dos Cortiços, S. Martinho do Bispo 1 , 3045-093 Coimbra
1 shared publication J.M. Miranda
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
A decade of computational fluid dynamics to study local hemodynamics in left main coronary bifurcation: A systematic review
Computational fluid dynamics (CFD) simulations are essential for studying cardiovascular diseases, particularly atherosclerosis. The left coronary artery (LCA) and its bifurcations, which supply blood to a large portion of the myocardium, are recognized as high-risk sites for plaque formation. This systematic review addresses the question: “What are the main CFD approaches, modeling strategies, and hemodynamic parameters used to study LCA bifurcation over the last decade, and how have these advanced the understanding of atherosclerosis progression?” A comprehensive search was conducted in PubMed, Web of Science, and Scopus databases. Following preferred reporting items for systematic reviews and meta-analyses guidelines, the search focused on original studies published within the last decade employing CFD to analyze LCA bifurcation hemodynamics. The review includes 108 CFD studies, mostly three-dimensional (3D) simulations (104 studies). Forty-seven used idealized 3D LCA models and 48 used patient-specific models focusing on bifurcation. Recent studies increasingly focus on hemodynamic parameters linked to atherosclerosis and the impact of stenosis and post-stenting restenosis on local blood flow. Simulations incorporating physiological features, such as fluid–structure interaction, cardiac motion, and blood rheology, are also included. Additionally, artificial intelligence is being integrated to efficiently predict hemodynamic parameters, reducing simulation time and cost. There is a clear trend toward using high-resolution imaging and advanced modeling for patient-specific CFD simulations. Despite methodological differences, disturbed flow patterns, low wall shear stress, and high oscillatory shear index are studied in the LCA bifurcation, supporting their role in atherogenesis. Standardizing protocols and integrating clinical data are essential for translating CFD findings into practice.
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
Open AccessA decade of computational fluid dynamics to study local hemodynamics in left main coronary bifurcation: A systematic review
Computational fluid dynamics (CFD) simulations are essential for studying cardiovascular diseases, particularly atherosclerosis. The left coronary artery (LCA) and its bifurcations, which supply blood to a large portion of the myocardium, are recognized as high-risk sites for plaque formation. This systematic review addresses the question: “What are the main CFD approaches, modeling strategies, and hemodynamic parameters used to study LCA bifurcation over the last decade, and how have these advanced the understanding of atherosclerosis progression?” A comprehensive search was conducted in PubMed, Web of Science, and Scopus databases. Following preferred reporting items for systematic reviews and meta-analyses guidelines, the search focused on original studies published within the last decade employing CFD to analyze LCA bifurcation hemodynamics. The review includes 108 CFD studies, mostly three-dimensional (3D) simulations (104 studies). Forty-seven used idealized 3D LCA models and 48 used patient-specific models focusing on bifurcation. Recent studies increasingly focus on hemodynamic parameters linked to atherosclerosis and the impact of stenosis and post-stenting restenosis on local blood flow. Simulations incorporating physiological features, such as fluid–structure interaction, cardiac motion, and blood rheology, are also included. Additionally, artificial intelligence is being integrated to efficiently predict hemodynamic parameters, reducing simulation time and cost. There is a clear trend toward using high-resolution imaging and advanced modeling for patient-specific CFD simulations. Despite methodological differences, disturbed flow patterns, low wall shear stress, and high oscillatory shear index are studied in the LCA bifurcation, supporting their role in atherogenesis. Standardizing protocols and integrating clinical data are essential for translating CFD findings into practice.
- Open Access
Hemodynamics Challenges for the Navigation of Medical Microbots for the Treatment of CVDs
Microbots have been considered powerful tools in minimally invasive medicine. In the last few years, the topic has been highly studied by researchers across the globe to further develop the capabilities of microbots in medicine. One of many applications of these devices is performing surgical procedures inside the human circulatory system. It is expected that these microdevices traveling along the microvascular system can remove clots, deliver drugs, or even look for specific cells or regions to diagnose and treat. Although many studies have been published about this subject, the experimental influence of microbot morphology in hemodynamics of specific sites of the human circulatory system is yet to be explored. There are numerical studies already considering some of human physiological conditions, however, experimental validation is vital and demands further investigations. The roles of specific hemodynamic variables, the non-Newtonian behavior of blood and its particulate nature at small scales, the flow disturbances caused by the heart cycle, and the anatomy of certain arteries (i.e., bifurcations and tortuosity of vessels of some regions) in the determination of the dynamic performance of microbots are of paramount importance. This paper presents a critical analysis of the state-of-the-art literature related to pulsatile blood flow around microbots.
Open AccessHemodynamics Challenges for the Navigation of Medical Microbots for the Treatment of CVDs
Microbots have been considered powerful tools in minimally invasive medicine. In the last few years, the topic has been highly studied by researchers across the globe to further develop the capabilities of microbots in medicine. One of many applications of these devices is performing surgical procedures inside the human circulatory system. It is expected that these microdevices traveling along the microvascular system can remove clots, deliver drugs, or even look for specific cells or regions to diagnose and treat. Although many studies have been published about this subject, the experimental influence of microbot morphology in hemodynamics of specific sites of the human circulatory system is yet to be explored. There are numerical studies already considering some of human physiological conditions, however, experimental validation is vital and demands further investigations. The roles of specific hemodynamic variables, the non-Newtonian behavior of blood and its particulate nature at small scales, the flow disturbances caused by the heart cycle, and the anatomy of certain arteries (i.e., bifurcations and tortuosity of vessels of some regions) in the determination of the dynamic performance of microbots are of paramount importance. This paper presents a critical analysis of the state-of-the-art literature related to pulsatile blood flow around microbots.
- 14 April 2019
- Published by Wiley in International Journal for Numerical Methods in Biomedical Engineering
- Vol. 35 (8) , e3207
Geometrical effects in the hemodynamics of stenotic and non‐stenotic left coronary arteries—numerical and in vitro approaches
Atherosclerosis is a common cardiovascular disease found in the left coronary artery (LCA), closely linked to local hemodynamic, which in turn is highly influenced by the artery geometry. The hemodynamics in the LCA was studied in a patient‐specific geometry without any sign of disease using both numerical and in vitro approaches. The influence of non‐planarity was evaluated through two models of the patient‐specific LCA that deviate from its original geometry in their planarity. Afterwards, in all models, irregular stenoses were created by a procedure in which the stenosis emerges by diffusion from low wall shear stress (WSS) areas. The WSS distribution and flow patterns were evaluated in all the models. The experimental results validate the numerical code developed to study the blood flow assuming a steady state Newtonian behaviour. Comparison between the planar and non‐planar idealized LCA revealed no significant differences in low WSS regions forming stenotic regions with identical shape. In the patient‐specific LCA, the low WSS regions are not consistent with the idealized models leading to a different stenosis shape. The results revealed that the non‐planarity has an unquestionable effect in helicity. It was also demonstrated that eccentricity of the vessels cross‐section and the position of the apex in relation to the axis of the parent branch contribute to the flow patterns observed. Numerical results of pulsatile blood flow assuming a non‐Newtonian behaviour, in the patient‐specific LCA, reinforce the non‐planarity effect in local hemodynamics.
- 14 April 2019
- Published by Wiley in International Journal for Numerical Methods in Biomedical Engineering
- Vol. 35 (8) , e3207
Geometrical effects in the hemodynamics of stenotic and non‐stenotic left coronary arteries—numerical and in vitro approaches
Atherosclerosis is a common cardiovascular disease found in the left coronary artery (LCA), closely linked to local hemodynamic, which in turn is highly influenced by the artery geometry. The hemodynamics in the LCA was studied in a patient‐specific geometry without any sign of disease using both numerical and in vitro approaches. The influence of non‐planarity was evaluated through two models of the patient‐specific LCA that deviate from its original geometry in their planarity. Afterwards, in all models, irregular stenoses were created by a procedure in which the stenosis emerges by diffusion from low wall shear stress (WSS) areas. The WSS distribution and flow patterns were evaluated in all the models. The experimental results validate the numerical code developed to study the blood flow assuming a steady state Newtonian behaviour. Comparison between the planar and non‐planar idealized LCA revealed no significant differences in low WSS regions forming stenotic regions with identical shape. In the patient‐specific LCA, the low WSS regions are not consistent with the idealized models leading to a different stenosis shape. The results revealed that the non‐planarity has an unquestionable effect in helicity. It was also demonstrated that eccentricity of the vessels cross‐section and the position of the apex in relation to the axis of the parent branch contribute to the flow patterns observed. Numerical results of pulsatile blood flow assuming a non‐Newtonian behaviour, in the patient‐specific LCA, reinforce the non‐planarity effect in local hemodynamics.
- 1 July 2018
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 59, 427-440
Artificial stenoses for computational hemodynamics
- 1 July 2018
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 59, 427-440
Artificial stenoses for computational hemodynamics
- 1 January 2018
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 67, 341-356
Experimental and numerical methodology to analyze flows in a coronary bifurcation
- 1 January 2018
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 67, 341-356
Experimental and numerical methodology to analyze flows in a coronary bifurcation
- 7 September 2016
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 26 (10) , 105013
PDMS droplet formation and characterization by hydrodynamic flow focusing technique in a PDMS square microchannel
This study reports the generation of polydimethylsiloxane (PDMS) droplets by hydrodynamic flow focusing technique in a PDMS square microchannel. The droplet generation was characterized and a flow regime map addressed by the capillary numbers of each phase was assembled. Different flow regimes were found—dripping, jetting, threading and viscous displacement and the respective boundaries were sketched. Droplet size, breakup distance and formation frequency were analysed and quantified for the jetting and dripping regimes. The dripping regime showed better results for droplet formation, leading to the highest throughput of monodisperse droplets: formation frequency of ≈12 Hz and droplets almost uniform in size (2.8% the coefficient of variance). The qualitative analysis and quantitative measurement of the different variables and their correlation within a capillary dependent regime map proved to be an invaluable tool to study droplet formation by hydrodynamic flow focusing technique in a PDMS square microchannel.
- 7 September 2016
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 26 (10) , 105013
PDMS droplet formation and characterization by hydrodynamic flow focusing technique in a PDMS square microchannel
This study reports the generation of polydimethylsiloxane (PDMS) droplets by hydrodynamic flow focusing technique in a PDMS square microchannel. The droplet generation was characterized and a flow regime map addressed by the capillary numbers of each phase was assembled. Different flow regimes were found—dripping, jetting, threading and viscous displacement and the respective boundaries were sketched. Droplet size, breakup distance and formation frequency were analysed and quantified for the jetting and dripping regimes. The dripping regime showed better results for droplet formation, leading to the highest throughput of monodisperse droplets: formation frequency of ≈12 Hz and droplets almost uniform in size (2.8% the coefficient of variance). The qualitative analysis and quantitative measurement of the different variables and their correlation within a capillary dependent regime map proved to be an invaluable tool to study droplet formation by hydrodynamic flow focusing technique in a PDMS square microchannel.
- 1 August 2016
- Published by Elsevier in Journal of Theoretical Biology
- Vol. 402, 89-99
Link between deviations from Murray’s Law and occurrence of low wall shear stress regions in the left coronary artery
- 1 August 2016
- Published by Elsevier in Journal of Theoretical Biology
- Vol. 402, 89-99
Link between deviations from Murray’s Law and occurrence of low wall shear stress regions in the left coronary artery
- 4 February 2016
- Published by Bentham Science Publishers Ltd. in Micro and Nanosystems
- Vol. 7 (3) , 154-158
Visualization of PDMS Microparticles Formation for Biomimetic Fluids
In vitro experiments of blood flow are usually performed with blood analogue fluids due to ethical and practical considerations. The ideal analogue must match the rheology of blood in multiple scales. Ideally, the blood analogue fluid should be a suspension of transparent particles with similar properties to red blood cells. PDMS particles are an interesting candidate because they are transparent, have a low refractive index and can be produced through polymerization by heating. Here we present a study to produce PDMS microparticles, to be used in biomimetic fluids, by droplet microfluidics. A microfluidic flow focusing device was employed to produce the droplets. A polymeric fluid (PDMS) was squeezed by two counter-flowing water streams (with 2% of SDS). The flow rate of the disperse phase (Qdis) was 1 µl min-1 and that of the continuous phase (Qcont) 5 µl min-1. Both liquids were forced to flow through a narrow slit (25 µm x 100 µm) located downstream the channels where PDMS stream breaks into droplets. In these conditions, the device operated in the jetting regime, forming polydispersed droplets. Monodispersed microparticles were also obtained in the dripping regime. The droplets were then cured thermally to form microparticles. The process of droplet formation was filmed with a high-speed camera and the movies were analyzed to relate the flow pattern to particle size distribution.
- 4 February 2016
- Published by Bentham Science Publishers Ltd. in Micro and Nanosystems
- Vol. 7 (3) , 154-158
Visualization of PDMS Microparticles Formation for Biomimetic Fluids
In vitro experiments of blood flow are usually performed with blood analogue fluids due to ethical and practical considerations. The ideal analogue must match the rheology of blood in multiple scales. Ideally, the blood analogue fluid should be a suspension of transparent particles with similar properties to red blood cells. PDMS particles are an interesting candidate because they are transparent, have a low refractive index and can be produced through polymerization by heating. Here we present a study to produce PDMS microparticles, to be used in biomimetic fluids, by droplet microfluidics. A microfluidic flow focusing device was employed to produce the droplets. A polymeric fluid (PDMS) was squeezed by two counter-flowing water streams (with 2% of SDS). The flow rate of the disperse phase (Qdis) was 1 µl min-1 and that of the continuous phase (Qcont) 5 µl min-1. Both liquids were forced to flow through a narrow slit (25 µm x 100 µm) located downstream the channels where PDMS stream breaks into droplets. In these conditions, the device operated in the jetting regime, forming polydispersed droplets. Monodispersed microparticles were also obtained in the dripping regime. The droplets were then cured thermally to form microparticles. The process of droplet formation was filmed with a high-speed camera and the movies were analyzed to relate the flow pattern to particle size distribution.
- 17 February 2015
- Published by World Scientific Pub Co Pte Ltd in Journal of Mechanics in Medicine and Biology
- Vol. 15 (01)
FABRICATION OF 3D MILI-SCALE CHANNELS FOR HEMODYNAMIC STUDIES
3D mili-scale channel representing simplified anatomical models of blood vessels were constructed in polidimethylsiloxane (PDMS). The objective was to obtain a sequential method to fabricate transparent PDMS models from a mold produced by rapid prototyping. For this purpose, two types of casting methods were compared, a known lost-wax casting method and a casting method using sucrose. The channels fabricated by both casting methods were analyzed by Optical Microscopy, Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray Spectroscopy (EDS). The lost-wax method is not ideal since the channels become contaminated during the removal process. The models produced with the lost-sucrose casting method exhibit much better optical characteristics. These models are transparent with no visible contamination, since the removing process is done by dissolution at room temperature rather than melting. They allow for good optical access for flow visualization and measurement of the velocity field by micro-Particle Image Velocimetry (μPIV). The channels fabricated by the lost-sucrose casting method were shown to be suitable for future hemodynamic studies using optical techniques.
- 17 February 2015
- Published by World Scientific Pub Co Pte Ltd in Journal of Mechanics in Medicine and Biology
- Vol. 15 (01)
FABRICATION OF 3D MILI-SCALE CHANNELS FOR HEMODYNAMIC STUDIES
3D mili-scale channel representing simplified anatomical models of blood vessels were constructed in polidimethylsiloxane (PDMS). The objective was to obtain a sequential method to fabricate transparent PDMS models from a mold produced by rapid prototyping. For this purpose, two types of casting methods were compared, a known lost-wax casting method and a casting method using sucrose. The channels fabricated by both casting methods were analyzed by Optical Microscopy, Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray Spectroscopy (EDS). The lost-wax method is not ideal since the channels become contaminated during the removal process. The models produced with the lost-sucrose casting method exhibit much better optical characteristics. These models are transparent with no visible contamination, since the removing process is done by dissolution at room temperature rather than melting. They allow for good optical access for flow visualization and measurement of the velocity field by micro-Particle Image Velocimetry (μPIV). The channels fabricated by the lost-sucrose casting method were shown to be suitable for future hemodynamic studies using optical techniques.
- Open Access
- 1 January 2013
- Published by Elsevier in APCBEE Procedia
- Vol. 7, 73-79
Blood Analog Fluid Flow in Vessels with Stenosis: Development of an Openfoam Code to Simulate Pulsatile Flow and Elasticity of the Fluid
- 1 January 2013
- Published by Elsevier in APCBEE Procedia
- Vol. 7, 73-79
Open AccessBlood Analog Fluid Flow in Vessels with Stenosis: Development of an Openfoam Code to Simulate Pulsatile Flow and Elasticity of the Fluid