Andrew Boettcher
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrew Boettcher has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Michael Hans
Robotics and Mobility Systems, California Institute of Technology, NASA Jet Propulsion Laboratory, Pasadena, USA
3 shared publicationsBrendan Chamberlain-Simon
Robotics and Mobility Systems, California Institute of Technology, NASA Jet Propulsion Laboratory, Pasadena, USA
2 shared publicationsBrian Wilcox
Robotics and Mobility Systems, California Institute of Technology, NASA Jet Propulsion Laboratory, Pasadena, USA
2 shared publicationsGareth Meirion-Griffith
Robotics and Mobility Systems, California Institute of Technology, NASA Jet Propulsion Laboratory, Pasadena, USA
2 shared publications- Hari Nayar
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
2 shared publications Ashish Goel
1 shared publication
Latest Publications
- Open Access
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Physical Emulation of Low-Gravity Ocean World Lander-ManipulatorDynamics on a Robotic Testbed For Autonomy Evaluation
The advancement of sensory-based robot control and learning algorithms for autonomous systems requires new approaches for spacecraft verification and validation (V&V) t to create a pathway to flight. The Ocean World Lander Autonomy Testbed, developed at NASA's Jet Propulsion Laboratory, is a hardware-in-the-loop platform designed to address this V&V challenge. To support the development of advanced lander autonomy, we present a novel control module that physically emulates the coupled dynamics of a lander and robotic manipulator interacting with planetary simulants. Unlike previous approaches, our method blends theoretical computational models with physical surface interactions to emulate both motion and joint torques in real time, without requiring external offloading hardware. This capability is critical for extending the state of the art in evaluating autonomy under flight-like conditions. It enables the evaluation of force-feedback policies and autonomy systems down to the motor control level. We demonstrate the versatility of our approach by replicating diverse lander-arm configurations on a single hardware platform, including varied gravity levels, lightweight flight-like arms, and modified simulant properties. This computational and experimental framework offers a new capability for testing autonomous system design prior to physical deployment.
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhysical Emulation of Low-Gravity Ocean World Lander-ManipulatorDynamics on a Robotic Testbed For Autonomy Evaluation
The advancement of sensory-based robot control and learning algorithms for autonomous systems requires new approaches for spacecraft verification and validation (V&V) t to create a pathway to flight. The Ocean World Lander Autonomy Testbed, developed at NASA's Jet Propulsion Laboratory, is a hardware-in-the-loop platform designed to address this V&V challenge. To support the development of advanced lander autonomy, we present a novel control module that physically emulates the coupled dynamics of a lander and robotic manipulator interacting with planetary simulants. Unlike previous approaches, our method blends theoretical computational models with physical surface interactions to emulate both motion and joint torques in real time, without requiring external offloading hardware. This capability is critical for extending the state of the art in evaluating autonomy under flight-like conditions. It enables the evaluation of force-feedback policies and autonomy systems down to the motor control level. We demonstrate the versatility of our approach by replicating diverse lander-arm configurations on a single hardware platform, including varied gravity levels, lightweight flight-like arms, and modified simulant properties. This computational and experimental framework offers a new capability for testing autonomous system design prior to physical deployment.
- Open Access
- 1 November 2019
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 16 (6)
Design optimization of a lightweight rocker–bogie rover for ocean worlds applications
Relatively recent discoveries have shown that large quantities of water can be found on moons of some of the planets among the gas giants in our solar system. Robotic mobility systems can study the varied geology and origins of these bodies if they are able to navigate the complex terrains of ocean worlds. The topographical features of ocean worlds present a unique combination of challenges for mobility. These include cryogenic ice, penitentes, salt evaporites, chaotic regions, and regolith with uncertain shear and sinkage properties. Uncertainty in both terrain properties and geometry motivates design of a platform that is mobile within a large range of obstacle geometries and terrain properties. This article reports on a research effort to study the requirements and numerically optimize the kinematic parameters of the rover to satisfy these goals. The platforms selected in the process were further verified via simulation. A simulation and analysis of grousers generated suitable designs for interaction with similar ledges and rough terrain. From this analysis, a prototype was developed and tested to meet the wide range of topography and terramechanics conditions expected on these bodies.
- 1 November 2019
- Published by SAGE Publications in International Journal of Advanced Robotic Systems
- Vol. 16 (6)
Open AccessDesign optimization of a lightweight rocker–bogie rover for ocean worlds applications
Relatively recent discoveries have shown that large quantities of water can be found on moons of some of the planets among the gas giants in our solar system. Robotic mobility systems can study the varied geology and origins of these bodies if they are able to navigate the complex terrains of ocean worlds. The topographical features of ocean worlds present a unique combination of challenges for mobility. These include cryogenic ice, penitentes, salt evaporites, chaotic regions, and regolith with uncertain shear and sinkage properties. Uncertainty in both terrain properties and geometry motivates design of a platform that is mobile within a large range of obstacle geometries and terrain properties. This article reports on a research effort to study the requirements and numerically optimize the kinematic parameters of the rover to satisfy these goals. The platforms selected in the process were further verified via simulation. A simulation and analysis of grousers generated suitable designs for interaction with similar ledges and rough terrain. From this analysis, a prototype was developed and tested to meet the wide range of topography and terramechanics conditions expected on these bodies.
- 1 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Surface mobility on ocean worlds
Understanding the geology and determining the origins for Ocean World bodies like Europa and Enceladus are science goals defined in the Decadal Survey of 2013. Long range mobility at an appropriately selected site on the surface and with the requisite science instruments will address these goals. The challenges for mobility are rugged terrain, unknown and potentially soft regolith, extremely low temperature, and on Europa, possible corrosive materials and exposure to radiation. We have designed and prototyped a concept vehicle that can handle a wide range of topography and terra-mechanics conditions that we believe is needed for successful roving on ocean world bodies. The concept has been analyzed, optimized, simulated, and designed. The results from operating and testing the prototype are reported in this paper.
- 1 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Surface mobility on ocean worlds
Understanding the geology and determining the origins for Ocean World bodies like Europa and Enceladus are science goals defined in the Decadal Survey of 2013. Long range mobility at an appropriately selected site on the surface and with the requisite science instruments will address these goals. The challenges for mobility are rugged terrain, unknown and potentially soft regolith, extremely low temperature, and on Europa, possible corrosive materials and exposure to radiation. We have designed and prototyped a concept vehicle that can handle a wide range of topography and terra-mechanics conditions that we believe is needed for successful roving on ocean world bodies. The concept has been analyzed, optimized, simulated, and designed. The results from operating and testing the prototype are reported in this paper.
- 1 December 2011
- Published by Defense Technical Information Center (DTIC)
Delineating Cultural Models: Extending the Cultural Mixture Model
This report describes research and recommendations for describing cultural knowledge. We discuss some of the approaches that have been used in the past, which have considered culture as a factor-analytic problem, as a cognitive style and as a set of shared knowledge. We develop a set of recommendations for extending Cultural Mixture Modeling (CMM) to move beyond the shared knowledge perspective and enable integration of the factor-analytic perspective as well. We provide a number of examples and recommendations regarding how structural models provide the appropriate representation for extending CMM and discuss issues related to statistical representation and inference that will need to be addressed on this path.
- 1 December 2011
- Published by Defense Technical Information Center (DTIC)
Delineating Cultural Models: Extending the Cultural Mixture Model
This report describes research and recommendations for describing cultural knowledge. We discuss some of the approaches that have been used in the past, which have considered culture as a factor-analytic problem, as a cognitive style and as a set of shared knowledge. We develop a set of recommendations for extending Cultural Mixture Modeling (CMM) to move beyond the shared knowledge perspective and enable integration of the factor-analytic perspective as well. We provide a number of examples and recommendations regarding how structural models provide the appropriate representation for extending CMM and discuss issues related to statistical representation and inference that will need to be addressed on this path.