Pavel Riha

We assessed an effect of an embedded electro-conductive multiwalled carbon nanotube nanopaper in an epoxy matrix on the release of the frozen actuation force and the actuation torque in the carbon nanotube nanopaper/epoxy composite after heating above its glass transition temperature. The presence of the nanopaper augmented the recovery of the actuation stress by the factor of two in comparison with the pure epoxy strips. We proposed a procedure that allowed us to assess this composite strengthening mechanism. The strengthening of the composite was attributed to the interlocking of the carbon nanotubes with the epoxy. When reheated, the composite samples, which contained stretched mutually intertwined nanotubes and epoxy segments, released a greater actuation stress then the epoxy samples, which comprised of less elastic networks of crosslinked segments of pure epoxy.

A novel microstrip resonant vapor sensor made from a conductive multiwalled carbon nanotubes/ethylene-octene copolymer composite, of which its sensing properties were distinctively altered by vapor polarity, was developed for the detection of organic vapors. The alteration resulted from the modified composite electronic impedance due to the penetration of the vapors into the copolymer matrix, which subsequently swelled, increased the distances between the carbon nanotubes, and disrupted the conducting paths. This in turn modified the reflection coefficient frequency spectra. Since both the spectra and magnitudes of the reflection coefficients at the resonant frequencies of tested vapors were distinct, a combination of these parameters was used to identify the occurrence of a particular vapor or to differentiate components of vapor mixtures. Thus, one multivariate MWCNT/copolymer microstrip resonant sensor superseded an array of selective sensors.

Hybrid thermoelectric composites consisting of organic ethylene-octene-copolymer matrices (EOC) and embedded inorganic pristine and functionalized multiwalled carbon nanotubes, carbon nanofibers or organic polyaniline and polypyrrole particles were used to form conductive nanostructures with thermoelectric properties, which at the same time had sufficient strength, elasticity, and stability. Oxygen doping of carbon nanotubes increased the concentration of carboxyl and C–O functional groups on the nanotube surfaces and enhanced the thermoelectric power of the respective composites by up to 150%. A thermocouple assembled from EOC composites generated electric current by heat supplied with a mere short touch of the finger. A practical application of this thermocouple was provided by a self-powered vapor sensor, for operation of which an electric current in the range of microvolts sufficed, and was readily induced by (waste) heat. The heat-induced energy ensured the functioning of this novel sensor device, which converted chemical signals elicited by the presence of heptane vapors to the electrical domain through the resistance changes of the comprising EOC composites.

The versatile properties of a nanopaper consisting of a porous network of multi-walled carbon nanotubes were applied to enhance the mechanical and electrical properties of a thermosetting epoxy polymer. The embedded nanopaper proved useful both in the monitoring of the curing process of the epoxy resin by the self-regulating Joule heating and in the supervising of tensile deformations of the composite by detecting changes in its electrical resistance. When heated by Joule heating above its glass transition temperature, the embedded carbon nanotube nanopaper accelerated not only the modelling of the composites into various shapes, but also the shape recovery process, wherein the stress in the nanopaper was released and the shape of the composite reverted to its original configuration. Lastly, in comparison with its respective epoxy adhesive, the internally heated electro-conductive carbon nanotube nanopaper/epoxy composite not only substantially shortened curing time while retaining comparable strength of the adhesive bonding of the steel surfaces, but also enabled a release of such bonds by repeated application of DC current.

Purpose: The synergistic effect of functionalization of multi-walled carbon nanotubes (CNT) using KMnO4 oxidation and initial tensile deformation on the electrical resistance of nanotube network/polyurethane composite subjected to elongation was studied. Design/methodology/approach: Though the initial deformation irreversibly changed the arrangement of carbon nanotube network, subsequent cyclic elongation confirmed stable resistance values. The increased strain-dependent resistance of stimulated nanotube network/polyurethane composite was demonstrated by monitoring vibration of tambour leather after a bead impact and finger flexion. Findings: The results showed a tenfold composite resistance increase for the composite prepared from KMnO₄ oxidized nanotubes, quantified by a so-called gauge factor, from a value of about 20 in comparison to the network prepared from pristine nanotubes. This is a substantial increase, which ranks the stimulated composite among materials with the highest electromechanical response. Originality/value: The results in this paper are new and have not been published yet. The paper combines different ideas which are developed together. It presents a new concept of synergistic effect of CNT oxidation and application of pre-strain simulation. Oxidation and pre-strain increases by several times the sensitivity of the tested composites which are predetermined for use as strain sensors of various sizes and shapes.

Polymer composites were manufactured from pristine and oxidized multi-walled carbon nanotubes and ethylene-octene copolymer. The composites had thermoelectric properties and exhibit thermoelectric effect, that is, the conversion of temperature differences into electricity. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy of the multi-walled carbon nanotubes in ethylene-octene copolymer matrix showed that the oxidation with HNO₃ or KMnO₄ enhanced its p-type electrical conductivity and that the thermoelectric power increase was proportional to the formation of new oxygen-containing functional groups on the surface of carbon nanotubes.

A multiwalled carbon nanotube network embedded in a polyurethane membrane was integrated into a glass fibre reinforced epoxy composite by means of vacuum infusion to become a part of the composite and has been serving for a strain self-sensing functionality. Besides the pristine nanotubes also nanotubes with Ag nanoparticles attached to their surfaces were used to increase strain sensing. Moreover, the design of the carbon nanotube/polyurethane sensor allowed formation of network micro-sized cracks which increased its reversible electrical resistance resulted in an enhancement of strain sensing. The resistance sensitivity, quantified by a gauge factor, increased more than hundredfold in case of a pre-strained sensor with Ag decorated nanotubes in comparison with the sensor with pristine nanotubes.