Yeh-Chung Chien
Research Subjects
Yeh-Chung Chien has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Chia-Wei Lee
Department of Safety, Health and Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan
2 shared publications- Ta-Yuan Chang
Department of Occupational Safety and Health, College of Public Health, China Medical University, Taichung, Taiwan
2 shared publications Cheng-Ping Chang
1 shared publication- Chia-Hsiu Tsai1 shared publication
Der-Jen Hsu
Department of Safety, Health and Environmental Engineering, National Kaohsiung First University of Science and Technology, Kaohsiung, Taiwan
1 shared publication- Der-Jen Hsu
Department of Safety, Health and Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiun 824, Taiwan
1 shared publication
Latest Publications
- Open Access
- 21 May 2026
- Published by American Chemical Society (ACS) in ACS Chemical Health & Safety
- Vol. 33 (4) , 607-617
Influences of Coffee Processing Stages and Variables on the Formation of Diacetyl and 2,3-pentanedione: A Field Assessment in a Café Setting
- 21 May 2026
- Published by American Chemical Society (ACS) in ACS Chemical Health & Safety
- Vol. 33 (4) , 607-617
Open AccessInfluences of Coffee Processing Stages and Variables on the Formation of Diacetyl and 2,3-pentanedione: A Field Assessment in a Café Setting
- Open Access
- 21 January 2026
- Published by Elsevier in Safety and Health at Work
- Vol. 17 (1) , 56-63
Associations Between Noise-Induced Hearing Loss and the Risk of High Fasting Blood Glucose Among the Air Force Population
- 21 January 2026
- Published by Elsevier in Safety and Health at Work
- Vol. 17 (1) , 56-63
Open AccessAssociations Between Noise-Induced Hearing Loss and the Risk of High Fasting Blood Glucose Among the Air Force Population
- 5 July 2021
- Published by Oxford University Press (OUP) in Annals of Work Exposures and Health
- Vol. 65 (9) , 1075-1084
Characterization of Airborne Particulates and Worker Exposures in Electro-static Powder Coating Operations
This study was to examine the airborne particulates/dusts and worker exposures in electro-static powder coating operations. Temporal variation and size distribution of dusts were assessed using direct-reading instrument, while the worker task-specific dust exposures (n = 41) were measured in three factories using conventional filter method. Additionally, toxic metal levels in the coating powder (n = 27) were analyzed to assess hazard potentials. Continuous monitoring of airborne respirable dust levels indicated large temporal variation across a normal working day. The particulate levels outside spraying booths were generally low (below 0.10 mg m−3) during normal spraying operation, but short-term level may reach as high as 21.8 mg m−3 (averaged at 4–5 mg m−3) when specific task such as cleaning the pipelines and spraying booth, was performed. Exploratory assessment on particle size distribution at four major working zones, administration, uploading, spraying, and baking, indicated no major difference among the zones, and between factories. The particle count median aerodynamic diameter was 0.88–1.69 µm, while the mean number concentrations were 10.97, 15.17, 18.49, and 27.03 (# cm−3) for zones administration, uploading, spraying, and baking, respectively. The worker task-specific dust exposures were found low during normal spraying, with the mean short-term total and respirable dust concentrations being 0.88 and 0.41 mg m−3, respectively. Both levels increased to 3.48 and 5.19 mg m−3, respectively (P < 0.05), if powder changing and system cleaning were done. Short-term total and respirable dust concentrations were 94.2 and 56.1 mg m−3, respectively, when complete cleaning process was performed inside spraying booth. Both levels exceeded the short-term exposure limits. The mean concentration of metals in the powder samples were 6.78, 9.52, 10 717, 2805, 1020, and 1361 µg g−1 for Pb, Cr (total), Al, Fe, Cu, and Sr, respectively. This study demonstrated that cleaning of spraying booth resulted in high dust exposures well exceeding the exposure limit. Toxic metals, particularly Pb, Cd, and Cr (total), levels measured in the powder samples were found low, and the resulting exposures were below the exposure limits, indicating relative low risks associated with the exposure at current dust levels.
- 5 July 2021
- Published by Oxford University Press (OUP) in Annals of Work Exposures and Health
- Vol. 65 (9) , 1075-1084
Characterization of Airborne Particulates and Worker Exposures in Electro-static Powder Coating Operations
This study was to examine the airborne particulates/dusts and worker exposures in electro-static powder coating operations. Temporal variation and size distribution of dusts were assessed using direct-reading instrument, while the worker task-specific dust exposures (n = 41) were measured in three factories using conventional filter method. Additionally, toxic metal levels in the coating powder (n = 27) were analyzed to assess hazard potentials. Continuous monitoring of airborne respirable dust levels indicated large temporal variation across a normal working day. The particulate levels outside spraying booths were generally low (below 0.10 mg m−3) during normal spraying operation, but short-term level may reach as high as 21.8 mg m−3 (averaged at 4–5 mg m−3) when specific task such as cleaning the pipelines and spraying booth, was performed. Exploratory assessment on particle size distribution at four major working zones, administration, uploading, spraying, and baking, indicated no major difference among the zones, and between factories. The particle count median aerodynamic diameter was 0.88–1.69 µm, while the mean number concentrations were 10.97, 15.17, 18.49, and 27.03 (# cm−3) for zones administration, uploading, spraying, and baking, respectively. The worker task-specific dust exposures were found low during normal spraying, with the mean short-term total and respirable dust concentrations being 0.88 and 0.41 mg m−3, respectively. Both levels increased to 3.48 and 5.19 mg m−3, respectively (P < 0.05), if powder changing and system cleaning were done. Short-term total and respirable dust concentrations were 94.2 and 56.1 mg m−3, respectively, when complete cleaning process was performed inside spraying booth. Both levels exceeded the short-term exposure limits. The mean concentration of metals in the powder samples were 6.78, 9.52, 10 717, 2805, 1020, and 1361 µg g−1 for Pb, Cr (total), Al, Fe, Cu, and Sr, respectively. This study demonstrated that cleaning of spraying booth resulted in high dust exposures well exceeding the exposure limit. Toxic metals, particularly Pb, Cd, and Cr (total), levels measured in the powder samples were found low, and the resulting exposures were below the exposure limits, indicating relative low risks associated with the exposure at current dust levels.
- Open Access
- 3 May 2018
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 15 (5) , 899
Water-Based Automobile Paints Potentially Reduce the Exposure of Refinish Painters to Toxic Metals
Exposure to lead-containing dusts is a global public health concern. This work addresses an important issue of whether eco-friendly water-based paints reduce the exposure potential of auto-repainting workers to metals. With this aim, metal levels in automobile paints and worker metal exposure were measured using both solvent- and water-based paints. The levels of metals, and particularly Pb, Cr (total), Fe, and Cu, in solvent-based paints varied greatly among colors and brands. Lead concentrations ranged from below the detection limit (~0.25 μg/g) to 107,928 μg/g (dry film) across all samples. In water-based paints, the concentrations of Pb and Cr (total) were generally two to three orders of magnitude lower, but the concentrations of Al and Cu exceeded those in some solvent-based paints. The personal short-term exposure of workers who applied water-based paints of popular colors, such as black and white, were generally low, with Pb levels of less than 3 and Cr (total) levels of less than 1 µg/m3. Conversely, mean short-term exposure to Pb during the painting of a yellow cab using solvent-based paints were 2028 µg/m3, which was ~14 times the Taiwan short-term permissible exposure limit, while the mean level of exposure to Cr (total) was 290 µg/m3, which was well below the exposure limit. This study demonstrates that water-based paints reduce the exposure potential to lead, and highlights the importance of source control in limiting the toxic metals in paints.
- 3 May 2018
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 15 (5) , 899
Open AccessWater-Based Automobile Paints Potentially Reduce the Exposure of Refinish Painters to Toxic Metals
Exposure to lead-containing dusts is a global public health concern. This work addresses an important issue of whether eco-friendly water-based paints reduce the exposure potential of auto-repainting workers to metals. With this aim, metal levels in automobile paints and worker metal exposure were measured using both solvent- and water-based paints. The levels of metals, and particularly Pb, Cr (total), Fe, and Cu, in solvent-based paints varied greatly among colors and brands. Lead concentrations ranged from below the detection limit (~0.25 μg/g) to 107,928 μg/g (dry film) across all samples. In water-based paints, the concentrations of Pb and Cr (total) were generally two to three orders of magnitude lower, but the concentrations of Al and Cu exceeded those in some solvent-based paints. The personal short-term exposure of workers who applied water-based paints of popular colors, such as black and white, were generally low, with Pb levels of less than 3 and Cr (total) levels of less than 1 µg/m3. Conversely, mean short-term exposure to Pb during the painting of a yellow cab using solvent-based paints were 2028 µg/m3, which was ~14 times the Taiwan short-term permissible exposure limit, while the mean level of exposure to Cr (total) was 290 µg/m3, which was well below the exposure limit. This study demonstrates that water-based paints reduce the exposure potential to lead, and highlights the importance of source control in limiting the toxic metals in paints.
- Open Access
- 1 January 2017
- Published by SNF Swedish Nutrition Foundation in Food & Nutrition Research
- Vol. 61 (1) , 1347478
Essential and toxic metals in animal bone broths
Background: This investigation examines the extraction of metals from animal bones into broth, and assesses whether bone broths are good sources of essential metals and the risks associated with the consumption of toxic metals. Method: Three sets of controlled experiments were performed to study the factors (cooking time, acidity, bone type and animal species) that influence metal extractions. Three types of animal bone broth-based foods were also tested. Results: Reducing the broth pH from 8.38 to 5.32 significantly ( p < 0.05) increased Ca and Mg extraction by factors of 17.4 and 15.3, respectively. A long cooking time, > 8 h, yielded significantly higher ( p < 0.05) Ca and Mg extraction than shorter cooking times. The extraction characteristics of metals, particularly Ca, Mg, Cu and Al, from the leg and rib bones differed. The between-species variations in extraction were larger than those of within-species. Conclusions: The Ca and Mg levels in home-made or commercial broth/soup were found not to exceed low tenths of milligram per serving, or <5% of the daily recommended levels. The risks that are associated with the ingestion of heavy metals such as Pb and Cd in broth are minimal because the levels were in the ranges of a few μg per serving.
- 1 January 2017
- Published by SNF Swedish Nutrition Foundation in Food & Nutrition Research
- Vol. 61 (1) , 1347478
Open AccessEssential and toxic metals in animal bone broths
Background: This investigation examines the extraction of metals from animal bones into broth, and assesses whether bone broths are good sources of essential metals and the risks associated with the consumption of toxic metals. Method: Three sets of controlled experiments were performed to study the factors (cooking time, acidity, bone type and animal species) that influence metal extractions. Three types of animal bone broth-based foods were also tested. Results: Reducing the broth pH from 8.38 to 5.32 significantly ( p < 0.05) increased Ca and Mg extraction by factors of 17.4 and 15.3, respectively. A long cooking time, > 8 h, yielded significantly higher ( p < 0.05) Ca and Mg extraction than shorter cooking times. The extraction characteristics of metals, particularly Ca, Mg, Cu and Al, from the leg and rib bones differed. The between-species variations in extraction were larger than those of within-species. Conclusions: The Ca and Mg levels in home-made or commercial broth/soup were found not to exceed low tenths of milligram per serving, or <5% of the daily recommended levels. The risks that are associated with the ingestion of heavy metals such as Pb and Cd in broth are minimal because the levels were in the ranges of a few μg per serving.
- 1 October 2011
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 193, 139-148
Volatile organics off-gassed among tobacco-exposed clothing fabrics
- 1 October 2011
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 193, 139-148
Volatile organics off-gassed among tobacco-exposed clothing fabrics