Sergey I. Platov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sergey I. Platov has a total of 130 co-authors. Here are the top co-authors by number of shared publications:
- Mikhail L. Lobanov
Ural Federal University named after the First President of Russia B. N. Yeltsin, Ekaterinburg, Russia
7 shared publications - Nikolay V. Urtsev
RTC Ausferr, Magnitogorsk, Russian Federation
5 shared publications - Roman. R. Dema
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
5 shared publications - Yuriy S. Sergeev
South Ural State University, Chelyabinsk, Russia
5 shared publications - Dmitry V. Terentyev
Nosov Magnitogorsk State Technical University
4 shared publications M. L. Krasnov
Magnitogorsk Iron and Steel Company, Magnitogorsk, Russia
4 shared publications
Latest Publications
- 30 September 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (3)
MODELING THE OPERATION OF 110 kV BUSBAR SECTION DIFFERENTIAL PROTECTION BASED ON A MICROPROCESSOR-BASED DEVICE
Ensuring a reliable power supply for a production process is impossible without the uninterrupted operation of power system components. The current trend toward increasing power consumption in the electrical grid infrastructure of metallurgical enterprises increases the probability of higher short-circuit currents, which, in turn, may lead to non-selective operation of busbar differential protection. At present, there is a growing trend toward the use of microprocessor-based devices in the modernization of relay protection and automation systems. For example, digital substations are being implemented, and new types of current transformers are being introduced. At the same time, microprocessor-based devices are economically advantageous because they offer a high availability factor and short operating time. Objectives. The research is aimed at developing a model of the logic part of busbar differential protection based on the BE2704 terminal manufactured by EKRA Research and Production Enterprise LLC. Methods Applied. A specialized domestic software package has been used to develop a mathematical model of various operating modes of the busbar differential protection. A comparative analysis has been performed using parameters recorded by a terminal operating in an actual power system to verify the functionality and accuracy of the differential protection algorithms. Originality. The novelty of the study lies in modeling the operation of busbar differential protection using BE2704 terminals under the conditions of a specific substation to assess the correctness of protection operation during faults, as well as in using the obtained results to configure protection terminals and train personnel. Result. A model of the busbar differential protection of the BE2704 terminal manufactured by EKRA Research and Production Enterprise LLC has been developed and analyzed. The adequacy of the model has been confirmed by comparing the simulation results with actual oscillograms of protection operation. Optimal parameters of the differential protection for the 110 kV busbar sections have been determined, ensuring maximum sensitivity and selectivity with minimum operating time. Practical Relevance. The model makes it possible to verify the connection diagrams, operating algorithms, and setting parameters of the BE2704 terminal at the 110/35/6 kV Taganay substation. This eliminates errors during the implementation and commissioning of equipment at the substation and reduces commissioning time. Analysis of various operating modes of busbar differential protection algorithms has made it possible to identify fundamental errors at the algorithm development stage and take measures to eliminate them, thereby reducing the time required to implement the equipment under development.
- 30 September 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (3)
MODELING THE OPERATION OF 110 kV BUSBAR SECTION DIFFERENTIAL PROTECTION BASED ON A MICROPROCESSOR-BASED DEVICE
Ensuring a reliable power supply for a production process is impossible without the uninterrupted operation of power system components. The current trend toward increasing power consumption in the electrical grid infrastructure of metallurgical enterprises increases the probability of higher short-circuit currents, which, in turn, may lead to non-selective operation of busbar differential protection. At present, there is a growing trend toward the use of microprocessor-based devices in the modernization of relay protection and automation systems. For example, digital substations are being implemented, and new types of current transformers are being introduced. At the same time, microprocessor-based devices are economically advantageous because they offer a high availability factor and short operating time. Objectives. The research is aimed at developing a model of the logic part of busbar differential protection based on the BE2704 terminal manufactured by EKRA Research and Production Enterprise LLC. Methods Applied. A specialized domestic software package has been used to develop a mathematical model of various operating modes of the busbar differential protection. A comparative analysis has been performed using parameters recorded by a terminal operating in an actual power system to verify the functionality and accuracy of the differential protection algorithms. Originality. The novelty of the study lies in modeling the operation of busbar differential protection using BE2704 terminals under the conditions of a specific substation to assess the correctness of protection operation during faults, as well as in using the obtained results to configure protection terminals and train personnel. Result. A model of the busbar differential protection of the BE2704 terminal manufactured by EKRA Research and Production Enterprise LLC has been developed and analyzed. The adequacy of the model has been confirmed by comparing the simulation results with actual oscillograms of protection operation. Optimal parameters of the differential protection for the 110 kV busbar sections have been determined, ensuring maximum sensitivity and selectivity with minimum operating time. Practical Relevance. The model makes it possible to verify the connection diagrams, operating algorithms, and setting parameters of the BE2704 terminal at the 110/35/6 kV Taganay substation. This eliminates errors during the implementation and commissioning of equipment at the substation and reduces commissioning time. Analysis of various operating modes of busbar differential protection algorithms has made it possible to identify fundamental errors at the algorithm development stage and take measures to eliminate them, thereby reducing the time required to implement the equipment under development.
- 30 June 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (2)
INFLUENCE OF THE DRAWING ROUTE ON THE COMPETITIVENESS OF STEEL-COPPER WIRE
The bimetallic wire manufacturing process involves two stages: the production of the blank (rod) and the finished product (wire). Based on the research and development conducted at the Nosov Magnitogorsk Mining and Metal-lurgical Institute, scientists have developed a technology for producing steel-copper rod using solid-phase metal bond-ing and implemented it at one of the enterprises in Magnitogorsk. This technology has significantly improved the adhe-sion of the sheath to the core and the stability of the wire rod drawing process. However, the issue of reducing the cost of bimetallic wire production remains unresolved. Therefore, the calculation of an efficient drawing route is of great importance, as it should ensure the production of high-quality wire with minimal manufacturing costs. For the analysis, an existing route for producing wire with a diameter of 1.15 mm has been selected, which includes three processing stages and 20 drawing passes at one of the enterprises in Magnitogorsk. In addition, a proposed drawing route has been considered, developed using a methodology created at our university, based on the evaluation of the stress-strain state of the wire in the deformation zone. The calculation results make it possible to obtain wire of the required quality level with minimal energy and material consumption. An analysis of the existing and proposed drawing routes has showed that the latter ensures process stability (safety factor values remain below the limiting values), the required wire quality due to uniform deformation across the wire cross-section, and high productivity by increasing die life and reducing the total length of wire passing through the dies. At the same time, the number of drawing passes has been reduced by 7 (or 35%), and electricity consumption has decreased by 23%. This also leads to a 35% reduction in equipment purchase costs and depreciation expenses.
- 30 June 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (2)
INFLUENCE OF THE DRAWING ROUTE ON THE COMPETITIVENESS OF STEEL-COPPER WIRE
The bimetallic wire manufacturing process involves two stages: the production of the blank (rod) and the finished product (wire). Based on the research and development conducted at the Nosov Magnitogorsk Mining and Metal-lurgical Institute, scientists have developed a technology for producing steel-copper rod using solid-phase metal bond-ing and implemented it at one of the enterprises in Magnitogorsk. This technology has significantly improved the adhe-sion of the sheath to the core and the stability of the wire rod drawing process. However, the issue of reducing the cost of bimetallic wire production remains unresolved. Therefore, the calculation of an efficient drawing route is of great importance, as it should ensure the production of high-quality wire with minimal manufacturing costs. For the analysis, an existing route for producing wire with a diameter of 1.15 mm has been selected, which includes three processing stages and 20 drawing passes at one of the enterprises in Magnitogorsk. In addition, a proposed drawing route has been considered, developed using a methodology created at our university, based on the evaluation of the stress-strain state of the wire in the deformation zone. The calculation results make it possible to obtain wire of the required quality level with minimal energy and material consumption. An analysis of the existing and proposed drawing routes has showed that the latter ensures process stability (safety factor values remain below the limiting values), the required wire quality due to uniform deformation across the wire cross-section, and high productivity by increasing die life and reducing the total length of wire passing through the dies. At the same time, the number of drawing passes has been reduced by 7 (or 35%), and electricity consumption has decreased by 23%. This also leads to a 35% reduction in equipment purchase costs and depreciation expenses.
- 31 January 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (1)
DEVELOPMENT OF AN ADAPTIVE INTELLIGENT DESIGN METHODOLOGY USING DIGITAL TWINS OF SUBTRACTIVE PROCESSES FOR INTERNAL SURFACE FORMATION WITH CUTTING TOOLS
Problem Statement (Relevance). The current level of digitalization in geological exploration, well development and operation at explored deposits, as well as in the manufacturing of high-tech machinery parts in metalworking, requires the creation of advanced technological production planning based on the use of digital twins and artificial intelligence. The practical implementation of this concept requires a deep understanding of the dynamics of physically similar processes such as drilling wells and machining holes. The knowledge obtained has made it possible to develop mathematical (simulation) models that adequately reflect real processes and can be effectively applied in the design and implementation of such technological processes. This approach makes it possible to eliminate processing inaccuracies, design errors, and decrease pre-production costs. Mathematical modeling improves the production culture and enables prediction of processing accuracy at the process design stage. Objectives. The study is aimed at developing and practically implementing the digital twin concept for precision hole (well) formation using rotating end multi-edge tools. Methods Applied. The models presented in the article are obtained using simulation modeling based on analytical methods grounded in fundamental physical laws, the basic principles of cutting and vibration mechanics, as well as the theory of plastic deformation of the material in the chip separation zone. The scientific novelty of the research lies in the development of a digital twin for surface formation, which for the first time considers the interrelation of chip separation and its effect on processing accuracy, taking into account cutting modes and tool vibration displacements. Result. The article presents a part of the methodological and mathematical software developed for the first time for the digital twin of hole (well) formation using rotating end multi-edge tools. The application of the digital twin in industrial practice has significant practical importance, as it enables accuracy verification of control programs for CNC machines and drilling equipment.
- 31 January 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (1)
DEVELOPMENT OF AN ADAPTIVE INTELLIGENT DESIGN METHODOLOGY USING DIGITAL TWINS OF SUBTRACTIVE PROCESSES FOR INTERNAL SURFACE FORMATION WITH CUTTING TOOLS
Problem Statement (Relevance). The current level of digitalization in geological exploration, well development and operation at explored deposits, as well as in the manufacturing of high-tech machinery parts in metalworking, requires the creation of advanced technological production planning based on the use of digital twins and artificial intelligence. The practical implementation of this concept requires a deep understanding of the dynamics of physically similar processes such as drilling wells and machining holes. The knowledge obtained has made it possible to develop mathematical (simulation) models that adequately reflect real processes and can be effectively applied in the design and implementation of such technological processes. This approach makes it possible to eliminate processing inaccuracies, design errors, and decrease pre-production costs. Mathematical modeling improves the production culture and enables prediction of processing accuracy at the process design stage. Objectives. The study is aimed at developing and practically implementing the digital twin concept for precision hole (well) formation using rotating end multi-edge tools. Methods Applied. The models presented in the article are obtained using simulation modeling based on analytical methods grounded in fundamental physical laws, the basic principles of cutting and vibration mechanics, as well as the theory of plastic deformation of the material in the chip separation zone. The scientific novelty of the research lies in the development of a digital twin for surface formation, which for the first time considers the interrelation of chip separation and its effect on processing accuracy, taking into account cutting modes and tool vibration displacements. Result. The article presents a part of the methodological and mathematical software developed for the first time for the digital twin of hole (well) formation using rotating end multi-edge tools. The application of the digital twin in industrial practice has significant practical importance, as it enables accuracy verification of control programs for CNC machines and drilling equipment.
- 18 November 2025
- Published by Springer Nature in Metallurgist
- Vol. 69 (8) , 1287-1292
Rationalization of tundish equipment protection design for continuous steel casting
- 18 November 2025
- Published by Springer Nature in Metallurgist
- Vol. 69 (8) , 1287-1292
Rationalization of tundish equipment protection design for continuous steel casting
- 27 June 2024
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 22 (2)
Application of a Polarization Optical Method for Assessing Deformation and Force Characteristics when Cutting Tool Edges Penetrate Elastoviscoplastic Materia
- 27 June 2024
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 22 (2)
Application of a Polarization Optical Method for Assessing Deformation and Force Characteristics when Cutting Tool Edges Penetrate Elastoviscoplastic Materia
- 25 December 2023
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 21 (4)
Mathematical Modeling of the Process of Cutting Sheet Metal with Parallel Knives
- 25 December 2023
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 21 (4)
Mathematical Modeling of the Process of Cutting Sheet Metal with Parallel Knives
- 12 October 2023
- Published by Springer Nature
- p. 215-222
Increasing the Lifetime of Mill Rolls by Applying Polymer Materials on Their Bodies
- 12 October 2023
- Published by Springer Nature
- p. 215-222
Increasing the Lifetime of Mill Rolls by Applying Polymer Materials on Their Bodies