Jiepeng Tian
Research Subjects
Jiepeng Tian has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Pengpeng Zhang
Institute of Geophysical and Geochemical Exploration, Chinese Academy of Geological Science, Langfang 065000, China
3 shared publications - Tongliang Tian
Shandong Institute of Geophysical and Geochemical Exploration, Jinan 250013, China
3 shared publications - Bin Li
Shandong Institute of Geophysical and Geochemical Exploration, Jinan 250013, China
2 shared publications Chao Fu
Tianjin Center of China Geological Survey Tianjin China
2 shared publications- Faqiang Zhao
College of Earth Science and Engineering, Shandong University of Science and Technology, Qingdao 266590, China
2 shared publications - Jun-Jian Li
Tianjin Center of China Geological Survey Tianjin China
2 shared publications
Latest Publications
- Open Access
Mineralogy and In Situ Sulfur Isotope Geochemistry of Pyrite: Implications for Ore-Forming Processes of the Moshan Gold Deposit, Jiaodong Peninsula, North China
The Jiaodong gold-mineralized area is one of the most significant gold districts in China. The newly discovered Moshan gold deposit is hosted in the Late Jurassic Queshan granite, previously considered a prospecting blind zone. In this study, pyrite from the Moshan gold deposit is examined as the primary research subject. To elucidate the ore-forming processes and genetic mechanisms of this deposit, we conducted a comprehensive mineralogical and geochemical study on pyrite, the principal gold-bearing mineral. EPMA and LA-MC-ICP-MS analyses reveal that the pyrite is slightly sulfur-deficient (average S/Fe ratio of 1.976) and exhibits trace element variations (As, Co, and Ni) strongly correlated with distinct metallogenic stages. Gold occurs in various forms, including visible inclusion gold, fracture gold, and invisible nano-particulate gold (Au0). The in situ sulfur isotope δ34S values range from 7.11‰ to 9.40‰ (average 8.00‰), displaying high homogeneity and a positive deviation from the troilite in the Canyon Diablo iron meteorite. By integrating pyrite S-Fe relationships, Co-Ni-As systematics, and sulfur isotope characteristics, the study indicates that the Moshan gold deposit originates from a magmatic-hydrothermal source. The ore-forming materials predominantly derive from Mesozoic granite-derived magmatic-hydrothermal fluids, with a minor contribution from crustal basement materials. The depth of mineralization is interpreted as mid-shallow. These findings not only highlight the metallogenic potential of the Queshan granite and clarify the genetic relationship between the Moshan gold deposit and other regional gold deposits but also provide a novel theoretical foundation and technical support for deep gold exploration in the Jiaodong region.
Open AccessMineralogy and In Situ Sulfur Isotope Geochemistry of Pyrite: Implications for Ore-Forming Processes of the Moshan Gold Deposit, Jiaodong Peninsula, North China
The Jiaodong gold-mineralized area is one of the most significant gold districts in China. The newly discovered Moshan gold deposit is hosted in the Late Jurassic Queshan granite, previously considered a prospecting blind zone. In this study, pyrite from the Moshan gold deposit is examined as the primary research subject. To elucidate the ore-forming processes and genetic mechanisms of this deposit, we conducted a comprehensive mineralogical and geochemical study on pyrite, the principal gold-bearing mineral. EPMA and LA-MC-ICP-MS analyses reveal that the pyrite is slightly sulfur-deficient (average S/Fe ratio of 1.976) and exhibits trace element variations (As, Co, and Ni) strongly correlated with distinct metallogenic stages. Gold occurs in various forms, including visible inclusion gold, fracture gold, and invisible nano-particulate gold (Au0). The in situ sulfur isotope δ34S values range from 7.11‰ to 9.40‰ (average 8.00‰), displaying high homogeneity and a positive deviation from the troilite in the Canyon Diablo iron meteorite. By integrating pyrite S-Fe relationships, Co-Ni-As systematics, and sulfur isotope characteristics, the study indicates that the Moshan gold deposit originates from a magmatic-hydrothermal source. The ore-forming materials predominantly derive from Mesozoic granite-derived magmatic-hydrothermal fluids, with a minor contribution from crustal basement materials. The depth of mineralization is interpreted as mid-shallow. These findings not only highlight the metallogenic potential of the Queshan granite and clarify the genetic relationship between the Moshan gold deposit and other regional gold deposits but also provide a novel theoretical foundation and technical support for deep gold exploration in the Jiaodong region.
- Open Access
Monazite U-Pb Chronology, Pyrite Rb-Sr Chronology and Isotope Geochemistry of the Xidouya Gold Deposit in the Jiaodong Peninsula, Eastern China: Constraints on the Timing and Process of Mineralization
The Jiaodong gold concentration area, one of the most important gold metallogenic belts in China, has long been the focus of contentious debates regarding the genetic mechanisms and timing of gold mineralization. This study presents the new monazite U-Pb and pyrite Rb-Sr isotopic chronology data for the No. I ore zone of the Xidouya gold deposit, integrated with H-O-S isotopic geochemical analyses, to systematically investigate the mineralization age, ore-forming fluid sources and material provenance of the deposit. The main mineralization age of the deposit is constrained to 117 Ma, which is highly consistent with the regional mineralization peak of 120 ± 5 Ma in the Jiaodong gold concentration area. The δD values of the fluids range from −88.0‰ to −75.0‰ (mean = −82.6‰), while the δ18OH2O values are calculated to be between 4.6‰ and 6.1‰. H-O isotopic data indicate that the ore-forming fluids of the Xidouya gold deposit originated from a mixed magmatic and meteoric source. As mineralization progressed from Stage I through Stage III, there was a detectable trend of increasing meteoric water involvement and a general decrease in δD and δ18OH2O values. This signature indicates that the initial mineralizing system was dominated by primary magmatic water which subsequently underwent significant water–rock interaction with Early Cretaceous granitic bodies and progressive dilution by meteoric fluids in an open tectonic environment. Furthermore, sulfur isotopes (average δ34S = +7.43‰) and the initial strontium isotope ratio (87Sr/86Sr = 0.71012) support a mixed-source model for the ore-forming materials, likely dominated by the anatexis of ancient crust with potential minor mantle-derived contributions. During the Early Cretaceous, lithospheric thinning and extension in the North China Craton (NCC) triggered large-scale magmatism and mineralization. The Xidouya gold deposit is a direct product of these regional tectono-magmatic-mineralizing events. This study provides new high-precision isotopic dating data for the Xidouya gold deposit, clarifies the evolutionary history of ore-forming fluids and the supply mechanism of ore-forming materials, and provides important theoretical insights and practical references for gold prospecting and exploration in the eastern part of the Jiaodong gold concentration area.
Open AccessMonazite U-Pb Chronology, Pyrite Rb-Sr Chronology and Isotope Geochemistry of the Xidouya Gold Deposit in the Jiaodong Peninsula, Eastern China: Constraints on the Timing and Process of Mineralization
The Jiaodong gold concentration area, one of the most important gold metallogenic belts in China, has long been the focus of contentious debates regarding the genetic mechanisms and timing of gold mineralization. This study presents the new monazite U-Pb and pyrite Rb-Sr isotopic chronology data for the No. I ore zone of the Xidouya gold deposit, integrated with H-O-S isotopic geochemical analyses, to systematically investigate the mineralization age, ore-forming fluid sources and material provenance of the deposit. The main mineralization age of the deposit is constrained to 117 Ma, which is highly consistent with the regional mineralization peak of 120 ± 5 Ma in the Jiaodong gold concentration area. The δD values of the fluids range from −88.0‰ to −75.0‰ (mean = −82.6‰), while the δ18OH2O values are calculated to be between 4.6‰ and 6.1‰. H-O isotopic data indicate that the ore-forming fluids of the Xidouya gold deposit originated from a mixed magmatic and meteoric source. As mineralization progressed from Stage I through Stage III, there was a detectable trend of increasing meteoric water involvement and a general decrease in δD and δ18OH2O values. This signature indicates that the initial mineralizing system was dominated by primary magmatic water which subsequently underwent significant water–rock interaction with Early Cretaceous granitic bodies and progressive dilution by meteoric fluids in an open tectonic environment. Furthermore, sulfur isotopes (average δ34S = +7.43‰) and the initial strontium isotope ratio (87Sr/86Sr = 0.71012) support a mixed-source model for the ore-forming materials, likely dominated by the anatexis of ancient crust with potential minor mantle-derived contributions. During the Early Cretaceous, lithospheric thinning and extension in the North China Craton (NCC) triggered large-scale magmatism and mineralization. The Xidouya gold deposit is a direct product of these regional tectono-magmatic-mineralizing events. This study provides new high-precision isotopic dating data for the Xidouya gold deposit, clarifies the evolutionary history of ore-forming fluids and the supply mechanism of ore-forming materials, and provides important theoretical insights and practical references for gold prospecting and exploration in the eastern part of the Jiaodong gold concentration area.
- Open Access
- 27 September 2025
- Published by Elsevier in Ore Geology Reviews
- Vol. 186
Genesis of the Xiling gold deposit, Jiaodong Peninsula, eastern China: Constraints from in situ trace elements and S-Pb isotopes of pyrite
- 27 September 2025
- Published by Elsevier in Ore Geology Reviews
- Vol. 186
Open AccessGenesis of the Xiling gold deposit, Jiaodong Peninsula, eastern China: Constraints from in situ trace elements and S-Pb isotopes of pyrite
- Open Access
In-Situ Geochemical and Rb–Sr Dating Analysis of Sulfides from a Gold Deposit Offshore of Northern Sanshandao, Jiaodong Peninsula, North China: Implications for Gold Mineralization
The gold deposit offshore of Northern Sanshandao is an ultra-large-scale gold deposit discovered in the Jiaodong ore area in recent years. This deposit is a fractured-zone altered-rock-type gold deposit; however, its ore genesis and precise mineralization processes are still highly controversial. Based on petrographical observation, the trace elements, sulfur isotopes, and rubidium–strontium isotopes of the gold-bearing pyrite were analyzed using LA-MC-ICP-MS to obtain the source of the ore-forming fluids and ore genesis. The results show that Au has a good positive correlation with Ag, As, and Cu. It is speculated that the As in the pyrite of the gold deposit offshore of Northern Sanshandao is in the form of As−, replacing S− and entering the pyrite, causing its lattice defects, and thus promoting the entry of Au+ into the gold-bearing pyrite. The Co/Ni ratios mainly range between 0.1 and 10, indicating that the mineralization process has experienced different forms of hydrothermal evolution and the mixing of different fluids. The results of the in-situ sulfur isotope analysis show that pyrite δ34S in the mineralization period is characterized by a high sulfur value. The authors of this study believe that the initial sulfur isotope composition has mantle-derived components. The large-scale, deep cutting, and high degree of fragmentation in the Sanshandao fault zone are conducive to the interaction between fluids and rocks, as well as the mixing and addition of seawater, resulting in the characteristic high δ34S value. The Sr isotopic compositions indicate a crust–mantle mixing attribute of the mineralized material source. The Rb–Sr isochron age of the pyrite is 118.5 ± 0.65 Ma, which represents the age of gold mineralization. According to the characteristics of the trace elements and sulfur isotopes, it is inferred that the gold deposit minerals offshore of Northern Sanshandao originated from deep magmatic-hydrothermal reservoirs, and the mixing of seawater and Au–As-rich hydrothermal fluids was the formation mechanism of huge amounts of gold precipitation.
Open AccessIn-Situ Geochemical and Rb–Sr Dating Analysis of Sulfides from a Gold Deposit Offshore of Northern Sanshandao, Jiaodong Peninsula, North China: Implications for Gold Mineralization
The gold deposit offshore of Northern Sanshandao is an ultra-large-scale gold deposit discovered in the Jiaodong ore area in recent years. This deposit is a fractured-zone altered-rock-type gold deposit; however, its ore genesis and precise mineralization processes are still highly controversial. Based on petrographical observation, the trace elements, sulfur isotopes, and rubidium–strontium isotopes of the gold-bearing pyrite were analyzed using LA-MC-ICP-MS to obtain the source of the ore-forming fluids and ore genesis. The results show that Au has a good positive correlation with Ag, As, and Cu. It is speculated that the As in the pyrite of the gold deposit offshore of Northern Sanshandao is in the form of As−, replacing S− and entering the pyrite, causing its lattice defects, and thus promoting the entry of Au+ into the gold-bearing pyrite. The Co/Ni ratios mainly range between 0.1 and 10, indicating that the mineralization process has experienced different forms of hydrothermal evolution and the mixing of different fluids. The results of the in-situ sulfur isotope analysis show that pyrite δ34S in the mineralization period is characterized by a high sulfur value. The authors of this study believe that the initial sulfur isotope composition has mantle-derived components. The large-scale, deep cutting, and high degree of fragmentation in the Sanshandao fault zone are conducive to the interaction between fluids and rocks, as well as the mixing and addition of seawater, resulting in the characteristic high δ34S value. The Sr isotopic compositions indicate a crust–mantle mixing attribute of the mineralized material source. The Rb–Sr isochron age of the pyrite is 118.5 ± 0.65 Ma, which represents the age of gold mineralization. According to the characteristics of the trace elements and sulfur isotopes, it is inferred that the gold deposit minerals offshore of Northern Sanshandao originated from deep magmatic-hydrothermal reservoirs, and the mixing of seawater and Au–As-rich hydrothermal fluids was the formation mechanism of huge amounts of gold precipitation.
- Open Access
Genesis of the Daliuhang Gold Deposit, Jiaodong Peninsula, Eastern China: Constraints from H-O-S-Pb-He-Ar Isotopes, and Geochronology
The Daliuhang gold deposit in the Qipengfu (Qixia–Penglai–Fushan) ore concentration area is a typical gold deposit of medium-low temperature hydrothermal veins. Uncertainties regarding the primary sources of ore-forming fluids, as well as whether host rocks contribute materials to the mineralization of the gold deposits in the Jiaodong Peninsula, are still subject to intense debate. Hydrogen–oxygen isotope results show that atmospheric water is involved in ore-forming fluids. According to the results of the helium–argon isotopes of pyrite, it is hypothesized that the initial fluid source was located in the oceanic crust or upper mantle lithosphere above the Early Cretaceous Paleo-Pacific Plate, as it was subducted into the eastern part of the eastern North China Craton. In situ sulfur isotope results show that high δ34S values characterize the pyrite in the main mineralization period. It is inferred that during the thinning and melting process of the lithospheric mantle, the volatile components enriched in pyrite contributed to the release of δ34S. At the same time, when the fluids ascended to the weak zones, such as fissures of ore-endowed peripheral rocks, the δ34S in the peripheral rocks were extracted, and the two processes acted together to cause high δ34S values to occur. Similarly, the lead and strontium isotopic compositions indicate a crust–mantle mixing attribute of the mineralized material source. The zircon U–Pb age of the ore-hosting granodiorite was 130.35 ± 0.55 Ma, and the Rb–Sr isochron age of the pyrite from the main mineralization period was 117.60 ± 0.10 Ma, which represents the timing of felsic magmatism and gold mineralization, respectively, with at least 10 Ma between the magmatism and mineralization. The magma gradually cooled over time after its formation, and when the granodiorite cooled down to 300 ± 50 °C, the temperature and pressure conditions were most conducive to the precipitation of gold. It is inferred that gold-rich initial mantle fluids with volatile components, rising along tectonically weak zones, such as fractures, underwent fluid phase separation in the fractured position of the granite and extracted the gold from the granodiorite, forming gold deposits.
Open AccessGenesis of the Daliuhang Gold Deposit, Jiaodong Peninsula, Eastern China: Constraints from H-O-S-Pb-He-Ar Isotopes, and Geochronology
The Daliuhang gold deposit in the Qipengfu (Qixia–Penglai–Fushan) ore concentration area is a typical gold deposit of medium-low temperature hydrothermal veins. Uncertainties regarding the primary sources of ore-forming fluids, as well as whether host rocks contribute materials to the mineralization of the gold deposits in the Jiaodong Peninsula, are still subject to intense debate. Hydrogen–oxygen isotope results show that atmospheric water is involved in ore-forming fluids. According to the results of the helium–argon isotopes of pyrite, it is hypothesized that the initial fluid source was located in the oceanic crust or upper mantle lithosphere above the Early Cretaceous Paleo-Pacific Plate, as it was subducted into the eastern part of the eastern North China Craton. In situ sulfur isotope results show that high δ34S values characterize the pyrite in the main mineralization period. It is inferred that during the thinning and melting process of the lithospheric mantle, the volatile components enriched in pyrite contributed to the release of δ34S. At the same time, when the fluids ascended to the weak zones, such as fissures of ore-endowed peripheral rocks, the δ34S in the peripheral rocks were extracted, and the two processes acted together to cause high δ34S values to occur. Similarly, the lead and strontium isotopic compositions indicate a crust–mantle mixing attribute of the mineralized material source. The zircon U–Pb age of the ore-hosting granodiorite was 130.35 ± 0.55 Ma, and the Rb–Sr isochron age of the pyrite from the main mineralization period was 117.60 ± 0.10 Ma, which represents the timing of felsic magmatism and gold mineralization, respectively, with at least 10 Ma between the magmatism and mineralization. The magma gradually cooled over time after its formation, and when the granodiorite cooled down to 300 ± 50 °C, the temperature and pressure conditions were most conducive to the precipitation of gold. It is inferred that gold-rich initial mantle fluids with volatile components, rising along tectonically weak zones, such as fractures, underwent fluid phase separation in the fractured position of the granite and extracted the gold from the granodiorite, forming gold deposits.
- 13 January 2022
- Published by Wiley in Geological Journal
- Vol. 57 (5) , 1891-1911
Petrogenesis and geodynamic setting of the Late Jurassic Queshan adakitic granite, Jiaodong Peninsula, southeastern North China Craton: Zircon U–Pb geochronological, geochemical, and Lu–Hf isotopic evidence
Late Mesozoic granites are present throughout the Jiaodong Peninsula in eastern China, but the petrogenesis of these granites, the magma sources, and the geodynamic setting of the magmatism remain unclear. This paper presents new zircon U–Pb geochronological and Lu–Hf isotopic and whole‐rock geochemical data for the Late Jurassic Queshan pluton in the Shandong Peninsula, an area that represents the boundary between the Jiaobei and Sulu ultrahigh‐pressure (UHP) terranes. Laser ablation–inductively coupled plasma–mass spectrometry zircon U–Pb dating yields Late Jurassic ages from 158 ± 1 to 153 ± 1 Ma for the pluton in addition to a small number of inherited zircons that yield ages that cluster at 2410, 1831–1776, 750, and 209–202 Ma. Zircons from different samples have similar 176Hf/177Hf values (0.281926–0.282255) and variably negative εHf (t) values that range from −26.5 to −15.1 (weighted mean of −22.9 ± 0.9). The corresponding two‐stage Hf model ages range from 2,869 to 2,154 Ma, with a weighted mean value of 2,645 ± 54 Ma. These data indicate that the magmas that formed the Queshan pluton were derived from multiple sources, including the lower crust of the North China (NCC) and Yangtze (YC) cratons, as well as collision‐related alkaline rocks. The whole‐rock geochemical compositions of the samples indicate that the granites are weakly peraluminous, are high‐K and calc‐alkaline with I‐type affinities, and have high contents of Sr, low contents of Y and Yb, high (La/Yb)N and Sr/Y values, and positive Eu anomalies (δEu = 1.20–1.65), indicating an adakitic affinity. This indicates that the Queshan granites formed from magmas generated by partial melting of a thickened region of the crust (>50 km) associated with eclogite, garnet amphibolite, or amphibolite residual material. The genesis of the Late Jurassic granites are also likely to have been influenced by the collisional orogeny between the NCC and YC and continued subduction of the Izanagi Plate. Thickening of the lower crust associated with this continental collisional event occurred before the magmatism, with further compression and thickening of the lower crust caused by the low‐angle subduction of the Izanagi Plate beneath northeastern China being the main geodynamic driver of the formation of the granites in this region.
- 13 January 2022
- Published by Wiley in Geological Journal
- Vol. 57 (5) , 1891-1911
Petrogenesis and geodynamic setting of the Late Jurassic Queshan adakitic granite, Jiaodong Peninsula, southeastern North China Craton: Zircon U–Pb geochronological, geochemical, and Lu–Hf isotopic evidence
Late Mesozoic granites are present throughout the Jiaodong Peninsula in eastern China, but the petrogenesis of these granites, the magma sources, and the geodynamic setting of the magmatism remain unclear. This paper presents new zircon U–Pb geochronological and Lu–Hf isotopic and whole‐rock geochemical data for the Late Jurassic Queshan pluton in the Shandong Peninsula, an area that represents the boundary between the Jiaobei and Sulu ultrahigh‐pressure (UHP) terranes. Laser ablation–inductively coupled plasma–mass spectrometry zircon U–Pb dating yields Late Jurassic ages from 158 ± 1 to 153 ± 1 Ma for the pluton in addition to a small number of inherited zircons that yield ages that cluster at 2410, 1831–1776, 750, and 209–202 Ma. Zircons from different samples have similar 176Hf/177Hf values (0.281926–0.282255) and variably negative εHf (t) values that range from −26.5 to −15.1 (weighted mean of −22.9 ± 0.9). The corresponding two‐stage Hf model ages range from 2,869 to 2,154 Ma, with a weighted mean value of 2,645 ± 54 Ma. These data indicate that the magmas that formed the Queshan pluton were derived from multiple sources, including the lower crust of the North China (NCC) and Yangtze (YC) cratons, as well as collision‐related alkaline rocks. The whole‐rock geochemical compositions of the samples indicate that the granites are weakly peraluminous, are high‐K and calc‐alkaline with I‐type affinities, and have high contents of Sr, low contents of Y and Yb, high (La/Yb)N and Sr/Y values, and positive Eu anomalies (δEu = 1.20–1.65), indicating an adakitic affinity. This indicates that the Queshan granites formed from magmas generated by partial melting of a thickened region of the crust (>50 km) associated with eclogite, garnet amphibolite, or amphibolite residual material. The genesis of the Late Jurassic granites are also likely to have been influenced by the collisional orogeny between the NCC and YC and continued subduction of the Izanagi Plate. Thickening of the lower crust associated with this continental collisional event occurred before the magmatism, with further compression and thickening of the lower crust caused by the low‐angle subduction of the Izanagi Plate beneath northeastern China being the main geodynamic driver of the formation of the granites in this region.
- 12 December 2019
- Published by Wiley in Geological Journal
- Vol. 55 (8) , 5885-5902
Formation of the Majiayao gold deposit, Jiaodong Peninsula, eastern China: Constraints from fluid inclusions, H–O–S–Pb isotopes, and pyrite Rb–Sr age
The Majiayao gold deposit at Qixia in Shandong Province is a typical gold deposit of medium–low temperature hydrothermal veins. This gold deposit is one of the most important types in the Jiaodong Peninsula. Four stages have been identified based on the cross‐cutting relationships and mineralogical and textural characteristics. The study of quartz vein fluid inclusions show that the inclusions can be divided into three categories: pure liquid or pure gas phase inclusions (type S), two‐phase gas and liquid inclusions (type W), and three‐phase inclusions rich in CO2 (type C). The results of laser Raman probe analysis show that the fluid inclusions are generally rich in CO2, thus forming a typical CO2–H2O–NaCl system. The fluid temperature results show that in stage I, only the type W fluid inclusions are identified by microthermometry, the homogenized temperatures (to liquid) are 210–343°C and mostly range from 260 to 280°C, the range of salinity is 1.57–10.98 wt.% NaCl, with a peak value of 8–11 wt.% NaCl, and the density is 0.65–1.02 g/cm3, with a peak value of 0.81–0.87 g/cm3; in stages II and III, the primary fluid inclusion assemblages include both type W and C inclusions, which show similar phase‐transition temperatures and are trapped between 190 and 300°C, and the peak values of salinities are 4–10 wt.% NaCl equivalent; and in stage IV, the total homogenization temperatures (Th‐TOT) into liquid range from 120 to 220°C, and the range of salinities is 4.2–7.9 wt.% NaCl. These values indicate that temperature, salinity, and density gradually decreased from the early to late mineralization stage. The ore‐forming fluid of the deposit was a thermal liquid system with medium–low temperature, medium–low salinity, and low density and was rich in reducing CO2. The H–O isotope shows that the ore‐forming fluids were dominated by metamorphic fluid with only minor amounts of meteoric water involved in the ore‐forming process. According to the S, Pb, and Sr isotopes analysis, it indicated that the source of ore‐forming materials is mainly crustal fluid. The measured Rb–Sr isochron age of pyrite is 123.4 ± 2.9 Ma, which indicates that the metallogenic age corresponded to the Early Cretaceous.
- 12 December 2019
- Published by Wiley in Geological Journal
- Vol. 55 (8) , 5885-5902
Formation of the Majiayao gold deposit, Jiaodong Peninsula, eastern China: Constraints from fluid inclusions, H–O–S–Pb isotopes, and pyrite Rb–Sr age
The Majiayao gold deposit at Qixia in Shandong Province is a typical gold deposit of medium–low temperature hydrothermal veins. This gold deposit is one of the most important types in the Jiaodong Peninsula. Four stages have been identified based on the cross‐cutting relationships and mineralogical and textural characteristics. The study of quartz vein fluid inclusions show that the inclusions can be divided into three categories: pure liquid or pure gas phase inclusions (type S), two‐phase gas and liquid inclusions (type W), and three‐phase inclusions rich in CO2 (type C). The results of laser Raman probe analysis show that the fluid inclusions are generally rich in CO2, thus forming a typical CO2–H2O–NaCl system. The fluid temperature results show that in stage I, only the type W fluid inclusions are identified by microthermometry, the homogenized temperatures (to liquid) are 210–343°C and mostly range from 260 to 280°C, the range of salinity is 1.57–10.98 wt.% NaCl, with a peak value of 8–11 wt.% NaCl, and the density is 0.65–1.02 g/cm3, with a peak value of 0.81–0.87 g/cm3; in stages II and III, the primary fluid inclusion assemblages include both type W and C inclusions, which show similar phase‐transition temperatures and are trapped between 190 and 300°C, and the peak values of salinities are 4–10 wt.% NaCl equivalent; and in stage IV, the total homogenization temperatures (Th‐TOT) into liquid range from 120 to 220°C, and the range of salinities is 4.2–7.9 wt.% NaCl. These values indicate that temperature, salinity, and density gradually decreased from the early to late mineralization stage. The ore‐forming fluid of the deposit was a thermal liquid system with medium–low temperature, medium–low salinity, and low density and was rich in reducing CO2. The H–O isotope shows that the ore‐forming fluids were dominated by metamorphic fluid with only minor amounts of meteoric water involved in the ore‐forming process. According to the S, Pb, and Sr isotopes analysis, it indicated that the source of ore‐forming materials is mainly crustal fluid. The measured Rb–Sr isochron age of pyrite is 123.4 ± 2.9 Ma, which indicates that the metallogenic age corresponded to the Early Cretaceous.