Tao Yang
Research Subjects
Tao Yang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Chunyong Wang
Jiangsu Semiconductor Device Optoelectronic Hybrid Integration Engineering Research Center
4 shared publicationsWei Yan
Jiangsu Semiconductor Device Optoelectronic Hybrid Integration Engineering Research Center
4 shared publicationsYunjing Ji
Jiangsu Semiconductor Device Optoelectronic Hybrid Integration Engineering Research Center
4 shared publicationsYan Zhao
Jiangsu Semiconductor Device Optoelectronic Hybrid Integration Engineering Research Center
3 shared publicationsZhixiang Wu
3 shared publicationsJiancheng Lai
Jiangsu Semiconductor Device Optoelectronic Hybrid Integration Engineering Research Center
2 shared publications
Latest Publications
- 9 September 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (19) , 35292
Microstructure modeling and laser scattering characteristic simulation of semi-water-covered asphalt pavement
The semi-water-covered state refers to a pavement condition where the macroscopic texture of the pavement remains partially exposed during water accumulation. It is of great significance to study the laser scattering characteristics of semi-water-covered asphalt pavement for perceiving pavement state and ensuring driving safety. Based on the fractal two-scale method (FTSM), a mathematical model of the microstructure of semi-water-covered asphalt pavement considering surface tension was constructed. A method combining ray tracing (RT) and physical optics (PO) was proposed to calculate the scattering intensity distribution of semi-water-covered asphalt pavement. Using this model, the scattering intensity distribution was calculated for varying incident angles, beam polarization states, and water levels. An experimental system was designed to validate the simulation results, with the root mean square error (RMSE) between experimental measurements and calculations not exceeding 0.0672 sr −1 . Results indicate that the scattering intensity distribution of the semi-water-covered asphalt pavement exhibits a significant peak at the specular angle, with a pronounced backward enhancement for p-light at large incident angles. As the water level rises, the overall intensity of the scattering distribution decreases, but the intensity in the specular direction symmetric to the incident direction increases. When the water level is 2 σ , the average scattering intensity is about one-tenth of that when the water level is 0 mm. The Brewster effect weakens its influence on p light at large incident angles, causing the wave troughs to move backward in the direction.
- 9 September 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (19) , 35292
Microstructure modeling and laser scattering characteristic simulation of semi-water-covered asphalt pavement
The semi-water-covered state refers to a pavement condition where the macroscopic texture of the pavement remains partially exposed during water accumulation. It is of great significance to study the laser scattering characteristics of semi-water-covered asphalt pavement for perceiving pavement state and ensuring driving safety. Based on the fractal two-scale method (FTSM), a mathematical model of the microstructure of semi-water-covered asphalt pavement considering surface tension was constructed. A method combining ray tracing (RT) and physical optics (PO) was proposed to calculate the scattering intensity distribution of semi-water-covered asphalt pavement. Using this model, the scattering intensity distribution was calculated for varying incident angles, beam polarization states, and water levels. An experimental system was designed to validate the simulation results, with the root mean square error (RMSE) between experimental measurements and calculations not exceeding 0.0672 sr −1 . Results indicate that the scattering intensity distribution of the semi-water-covered asphalt pavement exhibits a significant peak at the specular angle, with a pronounced backward enhancement for p-light at large incident angles. As the water level rises, the overall intensity of the scattering distribution decreases, but the intensity in the specular direction symmetric to the incident direction increases. When the water level is 2 σ , the average scattering intensity is about one-tenth of that when the water level is 0 mm. The Brewster effect weakens its influence on p light at large incident angles, causing the wave troughs to move backward in the direction.
- 27 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (13) , 28841-28859
Advanced fractal two-scale method for 905 nm laser scattering calculation of water-covered asphalt pavement and coverage perception
Sudden changes in pavement coverage can easily result in a vehicle's loss of control. Accurately characterizing laser scattering properties is essential for intelligent vehicle sensors like lidars to perceive pavement coverage information. In response to significant issues such as low computational efficiency, poor accuracy of existing scattering models, and the lack of methods for perceiving pavement water coverage information, this paper introduces an advanced laser scattering calculation method capable of describing water coverage conditions based on the fractal two-scale method (FTSM). The hemispherical spatial scattering intensity distribution of water-covered asphalt pavement is calculated. The influence of water depth on laser scattering characteristics and lidar signals of asphalt pavement is investigated. On this basis, a method for identifying the water coverage state of asphalt pavement using lidar is proposed. Experimental verification shows that the root mean square error (RMSE) between the calculated results of the advanced FTSM (AFTSM) model and the experimental results is only 8.69 × 10−4 sr-1. Compared with the classical numerical simulation model based on Kirchhoff approximation and the geometric optics model, it demonstrates a substantial improvement in calculation accuracy. Moreover, the recognition success rate of the asphalt pavement water coverage perception method proposed in this paper reaches over 95%. This work could expand the information acquisition dimension of a vehicle-borne lidar, provide a theoretical basis and data support for the development of road photoelectric perception technology, and is significant for promoting the development of intelligent driving environment perception technology.
- 27 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (13) , 28841-28859
Advanced fractal two-scale method for 905 nm laser scattering calculation of water-covered asphalt pavement and coverage perception
Sudden changes in pavement coverage can easily result in a vehicle's loss of control. Accurately characterizing laser scattering properties is essential for intelligent vehicle sensors like lidars to perceive pavement coverage information. In response to significant issues such as low computational efficiency, poor accuracy of existing scattering models, and the lack of methods for perceiving pavement water coverage information, this paper introduces an advanced laser scattering calculation method capable of describing water coverage conditions based on the fractal two-scale method (FTSM). The hemispherical spatial scattering intensity distribution of water-covered asphalt pavement is calculated. The influence of water depth on laser scattering characteristics and lidar signals of asphalt pavement is investigated. On this basis, a method for identifying the water coverage state of asphalt pavement using lidar is proposed. Experimental verification shows that the root mean square error (RMSE) between the calculated results of the advanced FTSM (AFTSM) model and the experimental results is only 8.69 × 10−4 sr-1. Compared with the classical numerical simulation model based on Kirchhoff approximation and the geometric optics model, it demonstrates a substantial improvement in calculation accuracy. Moreover, the recognition success rate of the asphalt pavement water coverage perception method proposed in this paper reaches over 95%. This work could expand the information acquisition dimension of a vehicle-borne lidar, provide a theoretical basis and data support for the development of road photoelectric perception technology, and is significant for promoting the development of intelligent driving environment perception technology.
- 10 May 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (11) , 17792-17808
Fractal two-scale method for calculating the laser scattering distribution of asphalt pavement
The laser scattering characteristic of pavement is one of the important factors that affect the detection performance of optical sensors such as lidars. Because the wavelength of laser does not match the roughness of the asphalt pavement, the common analytical approximation model of electromagnetic scattering is not applicable in this case, so it is difficult to calculate the laser scattering distribution of the pavement accurately and effectively. According to the self-similarity of the asphalt pavement profile, a fractal two-scale method (FTSM) based on fractal structure is proposed in this paper. We used the Monte Carlo method to obtain the bidirectional scattering intensity distribution (SID) and the back SID of the laser on the asphalt pavement with different roughness. Then we designed a laser scattering measurement system to verify the simulation results. We calculated and measured the SIDs of s-light and p-light of three asphalt pavements with different roughness (σ=0.34 mm; 1.74 mm; 3.08 mm). The results show that, compared with the traditional analytical approximation methods, the results of FTSM are closer to the experimental results. Compared with the single-scale model based on the Kirchhoff approximation, FTSM has a significant improvement in computational accuracy and speed.
- 10 May 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (11) , 17792-17808
Fractal two-scale method for calculating the laser scattering distribution of asphalt pavement
The laser scattering characteristic of pavement is one of the important factors that affect the detection performance of optical sensors such as lidars. Because the wavelength of laser does not match the roughness of the asphalt pavement, the common analytical approximation model of electromagnetic scattering is not applicable in this case, so it is difficult to calculate the laser scattering distribution of the pavement accurately and effectively. According to the self-similarity of the asphalt pavement profile, a fractal two-scale method (FTSM) based on fractal structure is proposed in this paper. We used the Monte Carlo method to obtain the bidirectional scattering intensity distribution (SID) and the back SID of the laser on the asphalt pavement with different roughness. Then we designed a laser scattering measurement system to verify the simulation results. We calculated and measured the SIDs of s-light and p-light of three asphalt pavements with different roughness (σ=0.34 mm; 1.74 mm; 3.08 mm). The results show that, compared with the traditional analytical approximation methods, the results of FTSM are closer to the experimental results. Compared with the single-scale model based on the Kirchhoff approximation, FTSM has a significant improvement in computational accuracy and speed.
- Open Access
- 19 June 2021
- Published by Institution of Engineering and Technology (IET) in IET Optoelectronics
- Vol. 16 (1) , 27-33
Influence of a target’s inclination on LiDAR waveform and its application
Inclination is one of the important parameters of a target’s surface, which is closely related to the waveform of light detection and ranging. When the target is tilted, the laser spot on the target’s surface changes greatly, and the influence of the target on the echo signal is more complex. Here, the formation process of a laser’s echo signal is explored. On that basis, the spot distribution model in the case of a large incident angle is optimised, and a comparison is made with the conventional method. A simulation system which can produce and display the signal affected by the inclined target is designed. In view of the difficulty in extracting the target's inclination from the echo signal, a method based on waveform analysis is proposed in this article. Then a calculation model is built to retrieve the inclination of the target from the echo signal by data fitting. The maximum measured error is only 0.948°, and the maximum root‐mean‐squared‐error is only 0.45°.
- 19 June 2021
- Published by Institution of Engineering and Technology (IET) in IET Optoelectronics
- Vol. 16 (1) , 27-33
Open AccessInfluence of a target’s inclination on LiDAR waveform and its application
Inclination is one of the important parameters of a target’s surface, which is closely related to the waveform of light detection and ranging. When the target is tilted, the laser spot on the target’s surface changes greatly, and the influence of the target on the echo signal is more complex. Here, the formation process of a laser’s echo signal is explored. On that basis, the spot distribution model in the case of a large incident angle is optimised, and a comparison is made with the conventional method. A simulation system which can produce and display the signal affected by the inclined target is designed. In view of the difficulty in extracting the target's inclination from the echo signal, a method based on waveform analysis is proposed in this article. Then a calculation model is built to retrieve the inclination of the target from the echo signal by data fitting. The maximum measured error is only 0.948°, and the maximum root‐mean‐squared‐error is only 0.45°.