Lu Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Lu Liu has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Yu Zhang
Harbin Engineering University
7 shared publications - Zongda Zhu
Harbin Institute of Technology
6 shared publications Yaxun Zhang
5 shared publicationsZhihai Liu
Key Laboratory of In-Fiber Integrated Optics, Ministry Education of China, Harbin Engineering University, Harbin, China
5 shared publicationsYong Wei
4 shared publications- Zhihai Liu
Key Laboratory of In-fiber Integrated Optics, Ministry Education of China, Harbin Engineering University, Harbin 150001, China
4 shared publications
Latest Publications
- 19 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (19) , 18446-18453
High-Sensitivity Triple-Channel Optical Fiber Surface Plasmon Resonance Sensor
Optical fiber surface plasmon resonance (SPR) sensors are widely used for refractive index (RI) sensing, thanks to their high sensitivity. However, with the increasing demand for multiple analytes detection and sensor integration, a traditional single-channel optical fiber SPR sensor is outdated. We propose and demonstrate a novel triple-channel optical fiber SPR sensor with high sensitivity. The sensor is fabricated with side-polished single-mode fiber (SMF), where the sensing film consists of a layer of gold nanofilm and a layer of TiO2 nanofilm. The resonance wavelength range of the SPR sensing zone can be adjusted significantly by changing the TiO2 nanofilm thickness. Experimentally, by cascading three sensing zones whose TiO2 nanofilm thicknesses are 10, 30, and 60 nm, respectively, a triple-channel SPR sensor is realized. The average sensitivities of three sensing channels reach up to 2637.8, 3962.2, and 6097.3 nm/RIU in the RI range of 1.333–1.370 RIU, which is superior to most current multichannel SPR sensors. Besides, three sensing channels are independent without crosstalk. The proposed triple-channel SPR sensor has great potential in biological and chemical sensing fields, especially in multiple analytes detection applications.
- 19 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (19) , 18446-18453
High-Sensitivity Triple-Channel Optical Fiber Surface Plasmon Resonance Sensor
Optical fiber surface plasmon resonance (SPR) sensors are widely used for refractive index (RI) sensing, thanks to their high sensitivity. However, with the increasing demand for multiple analytes detection and sensor integration, a traditional single-channel optical fiber SPR sensor is outdated. We propose and demonstrate a novel triple-channel optical fiber SPR sensor with high sensitivity. The sensor is fabricated with side-polished single-mode fiber (SMF), where the sensing film consists of a layer of gold nanofilm and a layer of TiO2 nanofilm. The resonance wavelength range of the SPR sensing zone can be adjusted significantly by changing the TiO2 nanofilm thickness. Experimentally, by cascading three sensing zones whose TiO2 nanofilm thicknesses are 10, 30, and 60 nm, respectively, a triple-channel SPR sensor is realized. The average sensitivities of three sensing channels reach up to 2637.8, 3962.2, and 6097.3 nm/RIU in the RI range of 1.333–1.370 RIU, which is superior to most current multichannel SPR sensors. Besides, three sensing channels are independent without crosstalk. The proposed triple-channel SPR sensor has great potential in biological and chemical sensing fields, especially in multiple analytes detection applications.
- 14 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (15) , 16621-16628
Side-Polished D-Type Fiber SPR Sensor for RI Sensing With Temperature Compensation
We propose and demonstrate a dual-channel surface plasmon resonance (SPR) sensor based on the side-polished D-type optical fiber, which is available for simultaneous measurement of refractive index (RI) and temperature. The single mode fiber (SMF) is side-polished to remove the fiber cladding and plated a layer of gold film on the polished surface to excite SPR effect. The RI sensing characters are researched by simulation and experiment. The sensitivity increases from 1543 nm/RIU to 6300 nm/RIU as RI increasing from 1.333 to 1.410. Besides, the resonance wavelength red-shifts about 40 nm as the gold film thickness increasing from 40 nm to 60 nm. Based on the above, we design the temperature compensated RI sensor by modifying the side-polished D-type fiber. One half of the side-polished region is applied for RI sensing and the other half is additionally coated a layer of polydimethylsiloxane (PDMS), which is high sensitive to temperature variation, for temperature sensing. In addition, the resonance wavelengths of two sensing channels can be controlled by adjusting the film thickness to avoid crosstalk. In the range from 1.333 to 1.390, the RI sensitivity reaches as high as 2260.1 nm/RIU. In the range from 20 °C to 60 °C, the temperature sensitivity reaches as high as -2.41 nm/°C. Finally, by temperature compensation, the RI measurement accuracy can be greatly improved.
- 14 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (15) , 16621-16628
Side-Polished D-Type Fiber SPR Sensor for RI Sensing With Temperature Compensation
We propose and demonstrate a dual-channel surface plasmon resonance (SPR) sensor based on the side-polished D-type optical fiber, which is available for simultaneous measurement of refractive index (RI) and temperature. The single mode fiber (SMF) is side-polished to remove the fiber cladding and plated a layer of gold film on the polished surface to excite SPR effect. The RI sensing characters are researched by simulation and experiment. The sensitivity increases from 1543 nm/RIU to 6300 nm/RIU as RI increasing from 1.333 to 1.410. Besides, the resonance wavelength red-shifts about 40 nm as the gold film thickness increasing from 40 nm to 60 nm. Based on the above, we design the temperature compensated RI sensor by modifying the side-polished D-type fiber. One half of the side-polished region is applied for RI sensing and the other half is additionally coated a layer of polydimethylsiloxane (PDMS), which is high sensitive to temperature variation, for temperature sensing. In addition, the resonance wavelengths of two sensing channels can be controlled by adjusting the film thickness to avoid crosstalk. In the range from 1.333 to 1.390, the RI sensitivity reaches as high as 2260.1 nm/RIU. In the range from 20 °C to 60 °C, the temperature sensitivity reaches as high as -2.41 nm/°C. Finally, by temperature compensation, the RI measurement accuracy can be greatly improved.
- 10 October 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11548, 115480X
Investigation and evaluation of 25 Gb/s optical modules for 5G fronthaul
The 5G fronthaul optical modules are the basic building block of the 5G network. With the further development of 5G, the shortage of optical fiber resources will gradually become prominent, and WDM solutions are desired. There are currently 4 WDM scheme candidates, CWDM, MWDM, LWDM and DWDM, and the debate over this issue continues. We organized the investigation and evaluation of one typical type of 25G optical modules (CWDM) from different vendors. Key parameters of optical/electrical interface have been tested and analysed, including spectrum characteristics, total mean output power, sensitivity, optical path penalty, eye diagram, power consumption as well as DDM function. Current commercial 25G CWDM optical modules are demonstrated capable to support 10 km transmission, covering almost all scenarios of 5G fronthaul.
- 10 October 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11548, 115480X
Investigation and evaluation of 25 Gb/s optical modules for 5G fronthaul
The 5G fronthaul optical modules are the basic building block of the 5G network. With the further development of 5G, the shortage of optical fiber resources will gradually become prominent, and WDM solutions are desired. There are currently 4 WDM scheme candidates, CWDM, MWDM, LWDM and DWDM, and the debate over this issue continues. We organized the investigation and evaluation of one typical type of 25G optical modules (CWDM) from different vendors. Key parameters of optical/electrical interface have been tested and analysed, including spectrum characteristics, total mean output power, sensitivity, optical path penalty, eye diagram, power consumption as well as DDM function. Current commercial 25G CWDM optical modules are demonstrated capable to support 10 km transmission, covering almost all scenarios of 5G fronthaul.
- 15 October 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (20) , 5093-5096
V-shaped micro-structure optical fiber surface plasmon resonance sensor for the simultaneous measurement of the refractive index and temperature
We propose and demonstrate a novel and compact optical fiber surface plasmon resonance (SPR) sensor for the simultaneous measurement of the refractive index (RI) and temperature. The sensor is fabricated by employing the eccentric-core fiber (ECF), which is polished to a V-shaped micro-structure optical fiber (MOF). One side of the MOF is used as the RI sensing channel, and the other side is used as the temperature sensing channel. Two sensing channels are independent without crosstalk. The sensor has high RI sensitivity up to the maximum of 3376 nm/RIU from 1.333 to 1.385 RIU, and high-temperature sensitivity up to from 20°C to 60°C. In addition, owing to the few-mode light in the ECF, the full width at half-maximum is smaller than other SPR sensors based on multimode fiber. This sensor will be extremely helpful to improve the RI measurement uncertainty caused by temperature disturbance.- 15 October 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (20) , 5093-5096
V-shaped micro-structure optical fiber surface plasmon resonance sensor for the simultaneous measurement of the refractive index and temperature
We propose and demonstrate a novel and compact optical fiber surface plasmon resonance (SPR) sensor for the simultaneous measurement of the refractive index (RI) and temperature. The sensor is fabricated by employing the eccentric-core fiber (ECF), which is polished to a V-shaped micro-structure optical fiber (MOF). One side of the MOF is used as the RI sensing channel, and the other side is used as the temperature sensing channel. Two sensing channels are independent without crosstalk. The sensor has high RI sensitivity up to the maximum of 3376 nm/RIU from 1.333 to 1.385 RIU, and high-temperature sensitivity up to from 20°C to 60°C. In addition, owing to the few-mode light in the ECF, the full width at half-maximum is smaller than other SPR sensors based on multimode fiber. This sensor will be extremely helpful to improve the RI measurement uncertainty caused by temperature disturbance.- 1 November 2017
- Published by Elsevier in Optics Communications
- Vol. 403, 290-295
Dual-channel surface plasmon resonance refractive index sensor based on modified hetero-core structure fiber
- 1 November 2017
- Published by Elsevier in Optics Communications
- Vol. 403, 290-295
Dual-channel surface plasmon resonance refractive index sensor based on modified hetero-core structure fiber
- Top Cited Papers
- 25 July 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (15) , 2948-2951
Surface-plasmon-resonance-based optical-fiber temperature sensor with high sensitivity and high figure of merit
We propose and demonstrate a novel and compact optical-fiber temperature sensor with a high sensitivity and high figure of merit (FOM) based on surface plasmon resonance (SPR). The sensor is fabricated by employing a single-mode twin-core fiber (TCF), which is polished as a circular truncated cone and coated with a layer of gold film and a layer of polydimethylsiloxane (PDMS). Owing to the high refractive index sensitivity of SPR sensors and high thermo-optic coefficient of PDMS, the sensor realizes a high temperature sensitivity of to in the range from 20°C to 70°C, transcending most other types of optical-fiber temperature sensors. Owing to the fundamental mode beam transmitting in the TCF, the sensor realizes a high FOM of up to 0.034/°C, more than twice that of SPR sensors based on multimode fiber. The proposed temperature sensor is meaningful and will have potential applications in many fields, such as biomedical and biomaterial.- 25 July 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (15) , 2948-2951
Top Cited PapersSurface-plasmon-resonance-based optical-fiber temperature sensor with high sensitivity and high figure of merit
We propose and demonstrate a novel and compact optical-fiber temperature sensor with a high sensitivity and high figure of merit (FOM) based on surface plasmon resonance (SPR). The sensor is fabricated by employing a single-mode twin-core fiber (TCF), which is polished as a circular truncated cone and coated with a layer of gold film and a layer of polydimethylsiloxane (PDMS). Owing to the high refractive index sensitivity of SPR sensors and high thermo-optic coefficient of PDMS, the sensor realizes a high temperature sensitivity of to in the range from 20°C to 70°C, transcending most other types of optical-fiber temperature sensors. Owing to the fundamental mode beam transmitting in the TCF, the sensor realizes a high FOM of up to 0.034/°C, more than twice that of SPR sensors based on multimode fiber. The proposed temperature sensor is meaningful and will have potential applications in many fields, such as biomedical and biomaterial. - 11 May 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (10) , 1982-1985
High-precision micro-displacement optical-fiber sensor based on surface plasmon resonance
We propose and demonstrate a novel optical-fiber micro-displacement sensor based on surface plasmon resonance (SPR) by fabricating a Kretschmann configuration on graded-index multimode fiber (GIMMF). We employ a single-mode fiber to change the radial position of the incident beam as the displacement. In the GIMMF, the angle between the light beam and fiber axis, which is closely related to the resonance angle, is changed by the displacement; thus, the resonance wavelength of the fiber SPR shifts. This micro-displacement fiber sensor has a wide detection range of 0–25 μm, a high sensitivity with maximum up to 10.32 nm/μm, and a nanometer resolution with minimum to 2 nm, which transcends almost all of other optical-fiber micro-displacement sensors. In addition, we also research that increasing the fiber polishing angle or medium refractive index can improve the sensitivity. This micro-displacement sensor will have a great significance in many industrial applications and provide a neoteric, rapid, and accurate optical measurement method in micro-displacement.
- 11 May 2017
- Published by Optica Publishing Group in Optics Letters
- Vol. 42 (10) , 1982-1985
High-precision micro-displacement optical-fiber sensor based on surface plasmon resonance
We propose and demonstrate a novel optical-fiber micro-displacement sensor based on surface plasmon resonance (SPR) by fabricating a Kretschmann configuration on graded-index multimode fiber (GIMMF). We employ a single-mode fiber to change the radial position of the incident beam as the displacement. In the GIMMF, the angle between the light beam and fiber axis, which is closely related to the resonance angle, is changed by the displacement; thus, the resonance wavelength of the fiber SPR shifts. This micro-displacement fiber sensor has a wide detection range of 0–25 μm, a high sensitivity with maximum up to 10.32 nm/μm, and a nanometer resolution with minimum to 2 nm, which transcends almost all of other optical-fiber micro-displacement sensors. In addition, we also research that increasing the fiber polishing angle or medium refractive index can improve the sensitivity. This micro-displacement sensor will have a great significance in many industrial applications and provide a neoteric, rapid, and accurate optical measurement method in micro-displacement.
- 23 April 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10323, 1032392
Dual-channel SPR fiber sensor by adjusting incident angle in fiber
We propose a novel dual-channel Surface Plasmon Resonance (SPR) fiber sensors based on the incident angle adjusting method. By grinding fiber tip to form wedge-shape with different angles, we can easier adjust the incident angle in fiber, and then the SPR wavebands will change corresponding. The simulation and experiment demonstrate that the SPR wavebands will red-shift with increasing of the fiber grinding angle. Based on this, we cascade two fiber tips whose grinding angles are 5° and 15° respectively. Under the tests of the refractive index (RI) range from 1.333 to 1.385, the SPR wavebands are 576~683nm and 677~955nm respectively. Therefore, we can demodulate SPR signal by wavelength division multiplexing (WDM) technology. Sequentially, we can detect two analytes simultaneously. This dual-channel SPR fiber sensor has important significance in the fields of multichannel liquid refractive indices and temperature selfreference measurements. © (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
- 23 April 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10323, 1032392
Dual-channel SPR fiber sensor by adjusting incident angle in fiber
We propose a novel dual-channel Surface Plasmon Resonance (SPR) fiber sensors based on the incident angle adjusting method. By grinding fiber tip to form wedge-shape with different angles, we can easier adjust the incident angle in fiber, and then the SPR wavebands will change corresponding. The simulation and experiment demonstrate that the SPR wavebands will red-shift with increasing of the fiber grinding angle. Based on this, we cascade two fiber tips whose grinding angles are 5° and 15° respectively. Under the tests of the refractive index (RI) range from 1.333 to 1.385, the SPR wavebands are 576~683nm and 677~955nm respectively. Therefore, we can demodulate SPR signal by wavelength division multiplexing (WDM) technology. Sequentially, we can detect two analytes simultaneously. This dual-channel SPR fiber sensor has important significance in the fields of multichannel liquid refractive indices and temperature selfreference measurements. © (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
- 3 October 2016
- Published by Optica Publishing Group in Optics Letters
- Vol. 41 (20) , 4649-4652
Whispering gallery mode temperature sensor of liquid microresonastor
We propose and demonstrate a whispering gallery mode (WGM) resonance-based temperature sensor, where the microresonator is made of a DCM (2-[2-[4-(dimethylamino)phenyl] ethenyl]-6-methyl-4H-pyran-4-ylidene)-doped oil droplet (a liquid material) immersed in the water solution. The oil droplet is trapped, controlled, and located by a dual-fiber optical tweezers, which prevents the deformation of the liquid droplet. We excite the fluorescence and lasing in the oil droplet and measure the shifts of the resonance wavelength at different temperatures. The results show that the resonance wavelength redshifts when the temperature increases. The testing sensitivity is 0.377 nm/°C in the temperature range 25°C–45°C. The results of the photobleaching testing of the dye indicate that measured errors can be reduced by reducing the measured time. As far as we know, this is the first time a WGM temperature sensor with a liquid state microcavity has been proposed. Compared with the solid microresonator, the utilization of the liquid microresonator improves the thermal sensitivity and provides the possibility of sensing in liquid samples or integrating into the chemical analyzers and microfluidic systems.
- 3 October 2016
- Published by Optica Publishing Group in Optics Letters
- Vol. 41 (20) , 4649-4652
Whispering gallery mode temperature sensor of liquid microresonastor
We propose and demonstrate a whispering gallery mode (WGM) resonance-based temperature sensor, where the microresonator is made of a DCM (2-[2-[4-(dimethylamino)phenyl] ethenyl]-6-methyl-4H-pyran-4-ylidene)-doped oil droplet (a liquid material) immersed in the water solution. The oil droplet is trapped, controlled, and located by a dual-fiber optical tweezers, which prevents the deformation of the liquid droplet. We excite the fluorescence and lasing in the oil droplet and measure the shifts of the resonance wavelength at different temperatures. The results show that the resonance wavelength redshifts when the temperature increases. The testing sensitivity is 0.377 nm/°C in the temperature range 25°C–45°C. The results of the photobleaching testing of the dye indicate that measured errors can be reduced by reducing the measured time. As far as we know, this is the first time a WGM temperature sensor with a liquid state microcavity has been proposed. Compared with the solid microresonator, the utilization of the liquid microresonator improves the thermal sensitivity and provides the possibility of sensing in liquid samples or integrating into the chemical analyzers and microfluidic systems.
- 13 September 2016
- Published by Optica Publishing Group in Optics Letters
- Vol. 41 (18) , 4320-4323
Dual-truncated-cone structure for quasi-distributed multichannel fiber surface plasmon resonance sensor
We propose and demonstrate an effective method to adjust the dynamic range of a fiber surface plasmon resonance (SPR) sensor by introducing a multimode fiber-sensing probe with a dual-truncated-cone (DTC) structure. When the grind angle of the DTC structure increases, the dynamic range redshifts. Based on this result, we fabricate a quasi-distributed two-channel multimode fiber SPR sensor by cascaded-connecting a DTC-sensing probe of 14° grind angle and a traditional transmitted multimode fiber (TMF)-sensing probe in the same fiber. The corresponding sensitivities of two sensing probes are 3423.08 nm/RIU and 2288.46 nm/RIU. By using this quasi-distributed multichannel fiber SPR-sensing approach, we may improve the detecting accuracy by extracting, calibrating, and compensating for the signals caused by the nonspecific bindings, other physical absorptions, and temperature changes in detecting samples, truly achieving dynamic detection in real-time. The excellence of this multichannel fiber SPR sensor is that the sensitivity of each subchannel-sensing probe stays unreduced after it is cascaded-connected in the main-channel fiber; the sensor is based on the multimode fiber, which is inexpensive, accessible, and convenient to be universalized in applications.
- 13 September 2016
- Published by Optica Publishing Group in Optics Letters
- Vol. 41 (18) , 4320-4323
Dual-truncated-cone structure for quasi-distributed multichannel fiber surface plasmon resonance sensor
We propose and demonstrate an effective method to adjust the dynamic range of a fiber surface plasmon resonance (SPR) sensor by introducing a multimode fiber-sensing probe with a dual-truncated-cone (DTC) structure. When the grind angle of the DTC structure increases, the dynamic range redshifts. Based on this result, we fabricate a quasi-distributed two-channel multimode fiber SPR sensor by cascaded-connecting a DTC-sensing probe of 14° grind angle and a traditional transmitted multimode fiber (TMF)-sensing probe in the same fiber. The corresponding sensitivities of two sensing probes are 3423.08 nm/RIU and 2288.46 nm/RIU. By using this quasi-distributed multichannel fiber SPR-sensing approach, we may improve the detecting accuracy by extracting, calibrating, and compensating for the signals caused by the nonspecific bindings, other physical absorptions, and temperature changes in detecting samples, truly achieving dynamic detection in real-time. The excellence of this multichannel fiber SPR sensor is that the sensitivity of each subchannel-sensing probe stays unreduced after it is cascaded-connected in the main-channel fiber; the sensor is based on the multimode fiber, which is inexpensive, accessible, and convenient to be universalized in applications.