ARAdriana Robledo-Peralta

Adriana Robledo-Peralta

*This is an algorithmically generated author record based on publicly available information.

Adriana Robledo-Peralta has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sorbentes de bajo costo y materiales reciclados para la remoción de contaminantes en agua

    by Miriam Lizbeth Flores-Avalos, María Dolores Josefina Rodríguez-Rosales, Adriana Robledo-Peralta, María Gorety Contreras-Hernández

    La contaminación del agua y la creciente escasez de agua potable exigen tecnologías de tratamiento eficientes y accesibles. Aunque la sorción es una opción eficaz, el alto costo de los materiales comerciales limita su uso a gran escala, especialmente en países en desarrollo. En este contexto, este trabajo explora la valorización de residuos agroindustriales y poliméricos como sorbentes de bajo costo. Se revisan los fundamentos del proceso, incluyendo mecanismos de fisisorción y quimisorción, así como modelos cinéticos e isotérmicos, y se destaca que, mediante modificaciones químicas y térmicas, estos materiales pueden alcanzar capacidades competitivas, superando en algunos casos los 400 mg/g para contaminantes como metales y colorantes. Desde una perspectiva de economía circular, esta estrategia es prometedora, aunque persisten desafíos en su escalado, regeneración y validación en condiciones reales.

  • Recycled PET-derived MOF for photocatalytic degradation of emerging pollutants: Recent progress and critical considerations

    by Felipe de J. Silerio-Vázquez, Ahmad Hosseini-Bandegharaei, Rakatzhan Abdikalykov, Omirserik Baigenzhenov, Babak Kakavandi, Adriana Robledo-Peralta


  • Open Access

    Water and Waste Water Treatment Research in Mexico and Its Occurrence in Relation to Sustainable Development Goal 6

    by Liliana Reynoso-Cuevas, Adriana Robledo-Peralta, Naghelli Ortega-Avila, Norma A. Rodríguez-Muñoz

    In Mexico, 95% of the population has access to drinking water sources, but only about 65% of domestic waste water is treated to safe levels. This study analyzes forty years of Mexican scientific production on water and waste water treatment through a bibliometric and conceptual approach, evaluating its contribution Sustainable Development Goal (SDG) 6. The analysis identified three major research clusters: (1) biological processes for water treatment, (2) development and optimization of physical–chemical processes, and (3) water quality and management. These themes reflect the evolution of biological approaches for identifying and removing organic contaminants, the application of advanced techniques for improving water quality, and the promotion of sustainable water use. The study also highlights the growing attention to emerging contaminants, nanotechnology, integrated water resource management, and persistent challenges in sanitation. With respect to SDG 6, Mexican research has mainly focused on targets 6.1 (universal and equitable access to drinking water), 6.3 (water quality), and 6.5 (water resources management), while targets 6.2 (sanitation), 6.a (international cooperation), and 6.b (community participation) remain underrepresented compared with the international benchmarks, where the research trend is on water management, resources, and the water–food–energy nexus. Finally, the findings also show synergies with SDGs 11 (sustainable cities and communities), 9 (industry, innovation, and infrastructure), and 3 (good health and well-being), although gaps persist in addressing equitable access to water and society participation.


  • Fixed-bed column adsorption modeling using Zr biocomposites for fluoride removal

    by Adriana Robledo-Peralta, Sergio Valle-Cervantes, Luis A. Torres-Castañón, Liliana Reynoso-Cuevas

    This research involved conducting continuous adsorption experiments to assess fluoride elimination from drinking water achieved by utilizing biocomposites created from the peels of oranges and apples, which were impregnated with zirconium (Zr), to form BOP-Zr and BAP-Zr, respectively. The findings from the experimental data indicate that BOP-Zr and BAP-Zr are effective biosorbents with a solid ability to remove fluoride selectively. Additionally, these biosorbents were found to be stable, as they do not release Zr into the treated water. Notably, these environmentally friendly biosorbents are derived from renewable sources and enhance the value of waste materials. The study employed various empirical models, including Bohart-Adamas, Thomas, Yoon-Nelson, BDST, Clark, Yan, and Woolborska, to elucidate the mechanisms and crucial parameters involved in fluoride adsorption within packed bed columns. The Yan model demonstrated the highest correlation among these models, indicating a chemical adsorption process with kinetics following a pseudo-second-order pattern. BOP-Zr and BAP-Zr exhibited a maximum adsorption capacity of 59.3 and 47.5 mg/g, respectively, under a flow rate of 4 mL/min and an inlet fluoride concentration of 25 mg/L. The analysis of mass transfer coefficients revealed that the primary step governing the adsorption procedure was diffusion through pores. Consequently, the study conclusively establishes that BOP-Zr and BAP-Zr biocomposites, originating from lignocellulosic biomass remains, present a practical and competitive choice for eliminating fluoride from water. These materials surpass waste materials in performance and rival more expensive options in efficiency and performance.


  • Open Access

    Lignocellulosic Biomass as Sorbent for Fluoride Removal in Drinking Water

    by Adriana Robledo-Peralta, Luis A. Torres-Castañón, René I. Rodríguez-Beltrán, Liliana Reynoso-Cuevas

    Water supply to millions of people worldwide is of alarmingly poor quality. Supply sources are depleting, whereas demand is increasing. Health problems associated with water consumption exceeding 1.5 mg/L of fluoride are a severe concern for the World Health Organization (WHO). Therefore, it is urgent to research and develop new technologies and innovative materials to achieve partial fluoride reduction in water intended for human consumption. The new alternative technologies must be environmentally friendly and be able to remove fluoride at the lowest possible costs. So, the use of waste from lignocellulosic biomasses provides a promising alternative to commercially inorganic-based adsorbents—published studies present bioadsorbent materials competing with conventional inorganic-based adsorbents satisfactorily. However, it is still necessary to improve the modification methods to enhance the adsorption capacity and selectivity, as well as the reuse cycles of these bioadsorbents.


  • Open Access

    Zr-Based Biocomposite Materials as an Alternative for Fluoride Removal, Preparation and Characteristics

    by Adriana Robledo-Peralta, Linda Viviana García-Quiñonez, René I. Rodríguez-Beltrán, Liliana Reynoso-Cuevas

    The development of biocomposite materials used as adsorbents to remove ions in aqueous media has become an attractive option. The biomasses (base materials) are chemically treated and impregnated with metal cations, becoming competitive for fluoride-capture capacity. In this research, Valence orange (Citrus sinensis) and Red Delicious apple (Malus Domestica) peels were modified by alkaline treatment, carboxylation, and impregnation with zirconium (Zr). These materials were characterized morphologically and structurally to understand the modifications in the treated biomasses and the mechanism of fluoride adsorption. The results show changes in surface area and composition, most notably, an increment in roughness and Zr impregnation of the bioadsorbents. After batch experimentation, the maximum capacity of the materials was determined to be 4.854 and 5.627 mg/g for the orange and apple peel bioadsorbent, respectively, at pH 3.5. The experimental data fitted the Langmuir model, suggesting that chemisorption occurs in monolayers. Finally, the characterization of the bioadsorbents in contact with fluoride allowed the replacement of OH species by fluoride or the formation of hydrogen bonds between them as an adsorption mechanism. Therefore, these bioadsorbents are considered viable and can be studied in a continuous system.


  • Bio-composites development for fluoride adsorption in drinking water

    by Adriana Robledo Peralta, Liliana Reynoso Cuevas, Margarita Sanchez Dominguez, Maria Teresa Alarcón Herrera, Sergio Valle Cervantes, Diana Barraza Jimenez

  • Open Access

    Bio-composites development for fluoride adsorption in drinking water

    by Adriana Robledo Peralta, Liliana Reynoso Cuevas, Margarita Sanchez Dominguez, Maria Teresa Alarcón Herrera, Sergio Valle Cervantes, Diana Barraza Jimenez

    The removal of fluorides from drinking water requires the development of materials with high adsorption capacity, low cost and minimal environmental impact. Agro-industrial waste biomasses, such as fruit peels, stand out as an alternative. Due to their macromolecule-rich constitution, they are rich in functional groups with high affinity to form bonds or exchange with fluoride.

  • Open Access

    Arsenic and Fluoride in Groundwater, Prevalence and Alternative Removal Approach

    by Adriana Robledo-Peralta, Miriam López-Guzmán, Corazón G. Morales-Amaya, Liliana Reynoso-Cuevas

    Contamination of drinking water by arsenic and fluoride is a global problem, as more than 300 million people in more than 100 countries have been affected by their presence. These elements are considered the most serious contaminants in drinking water and their removal is a worldwide concern. Therefore, the evaluation of three alternative approaches—electrocoagulation, adsorption by biomaterials, and adsorption by metal oxide magnetic nanoparticles (MNPs)—was performed for arsenic and fluoride removal from groundwater. Arsenic removal from synthetic and groundwater (well water) was accomplished with the three processes; meanwhile, fluoride removal from groundwater was only reported by two methods. The results indicate that an electrocoagulation process is a good option for As (>97%) and F (>90%) removal in co-occurrence; however, the operational conditions for the removal of both pollutants must be driven by those used for fluoride removal. As (80–83%) and F (>90%) removal with the biomaterials was also successful, even when the application objective was fluoride removal. Finally, MNPs (Co and Mn) were designed and applied only for arsenic removal and reached >95%. Factors such as the pH, the presence of interfering ions, and the initial concentration of the contaminants are decisive in the treatment process’s efficiency.