Sayyed Mostafa Habibi-Khorassani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sayyed Mostafa Habibi-Khorassani has a total of 243 co-authors. Here are the top co-authors by number of shared publications:
- Nourallah Hazeri
Department of Chemistry, Faculty of Science University of Sistan and Baluchestan Zahedan Iran
76 shared publications Malek Taher Maghsoodlou
Department of Chemistry, Faculty of Science, The University of Sistan and Baluchestan, Zahedan, P.O. Box 98135-674, Zahedan, Iran
68 shared publications- Mehdi Shahraki
Department of Chemistry, Faculty of Science, University of Sistan and Baluchestan
52 shared publications - Malek Taher Maghsoodlou
Department of Chemistry, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran
49 shared publications Ali Ebrahimi
Department of Chemistry; Faculty of Science; University of Sistan and Baluchestan; P. O. Box 98135-674 Zahedan Iran
35 shared publicationsGhasem Marandi
Shahid Bakeri High Education Center of Miandoab , Urmia University , Urmia , Iran
27 shared publications
Latest Publications
- 1 September 2021
- Published by Bentham Science Publishers Ltd. in Current Organic Synthesis
- Vol. 18 (6) , 598-613
Full Kinetics and Mechanism Investigation for Generating 4-Substituted 1, 4- Dihydropyridine Derivatives in the Presence of Green Catalyst and Aqueous Medium: Experimental Procedure
Aims and Objective: The main objective of the kinetic investigation of the reaction between ethyl acetoacetate 1, ammoniumacetat 2, dimedone 3, and diverse substitutions of benzaldehyde 4-X, (X= H, NO2, CN, CF3, Cl, CH (CH3)2, CH3, OCH3, OCH3, and OH) for generating 4-substituted 1, 4-dihydropyridine derivatives (product 5) was to recognize the most realistic reaction mechanism. The layout of the reaction mechanism was studied kinetically via a UV-visible spectrophotometry approach. Materials and Methods: Among the various mechanisms, only mechanism1 (path1) involving 12 steps was recognized as a dominant mechanism (path1). Herein, the reactions between 1 and 2 (kobs= 814.04 M-1.min-1) and also between 3 and 4-H (kobs= 151.18 M-1.min-1) can be accepted as the first and second steps (step1 and step2) of the reaction mechanism, respectively. Amongst all steps, only step9 of the dominant mechanism (path1) comprised substituent groups (X) near the reaction center. Results and Discussion: Para electron-withdrawing or donating groups on the compound 4-X increased the rate of the reaction 4 times more or decreased 8.7 times less than the benzaldehyde alone. So, this step is sensitive for monitoring any small or huge changes in the reaction rate. Accordingly, step9 is the rate-determining step of the reaction mechanism (path1). Conclusion: The recent result is in agreement with the Hammett description of an excellent dual substituent factor (r = 0.990) and positive value of reaction constant (ρ= +0.9502), which confirms that both the resonance and inductive effects “altogether” contribute to the reaction center of step9 in the dominant mechanism (path1).
- 1 September 2021
- Published by Bentham Science Publishers Ltd. in Current Organic Synthesis
- Vol. 18 (6) , 598-613
Full Kinetics and Mechanism Investigation for Generating 4-Substituted 1, 4- Dihydropyridine Derivatives in the Presence of Green Catalyst and Aqueous Medium: Experimental Procedure
Aims and Objective: The main objective of the kinetic investigation of the reaction between ethyl acetoacetate 1, ammoniumacetat 2, dimedone 3, and diverse substitutions of benzaldehyde 4-X, (X= H, NO2, CN, CF3, Cl, CH (CH3)2, CH3, OCH3, OCH3, and OH) for generating 4-substituted 1, 4-dihydropyridine derivatives (product 5) was to recognize the most realistic reaction mechanism. The layout of the reaction mechanism was studied kinetically via a UV-visible spectrophotometry approach. Materials and Methods: Among the various mechanisms, only mechanism1 (path1) involving 12 steps was recognized as a dominant mechanism (path1). Herein, the reactions between 1 and 2 (kobs= 814.04 M-1.min-1) and also between 3 and 4-H (kobs= 151.18 M-1.min-1) can be accepted as the first and second steps (step1 and step2) of the reaction mechanism, respectively. Amongst all steps, only step9 of the dominant mechanism (path1) comprised substituent groups (X) near the reaction center. Results and Discussion: Para electron-withdrawing or donating groups on the compound 4-X increased the rate of the reaction 4 times more or decreased 8.7 times less than the benzaldehyde alone. So, this step is sensitive for monitoring any small or huge changes in the reaction rate. Accordingly, step9 is the rate-determining step of the reaction mechanism (path1). Conclusion: The recent result is in agreement with the Hammett description of an excellent dual substituent factor (r = 0.990) and positive value of reaction constant (ρ= +0.9502), which confirms that both the resonance and inductive effects “altogether” contribute to the reaction center of step9 in the dominant mechanism (path1).
- 23 July 2021
- Published by Taylor & Francis in Molecular Physics
- Vol. 119 (23)
Ionic strength effect on the kinetics and mechanism of N-vinyl compound formation in the presence of heterocyclic biological base: empirical and theoretical approaches
In the current work, kinetics and mechanism of the reaction between dimethyl acetylenedicarboxylate (DMAD), thiazolidine-2,4-dione (heterocyclic biological base, TZD) and triphenylarsine (TPA) has been studied for the synthesis of N-vinyl compound in the presence of various salts and solvents by the UV–visible technique. Through an alternation in the reaction environment from lone methanol (kobs = 0.3121 M−1Min−1) or acetone alone (kobs = 0.008 M−1Min−1) to a mixture of methanol and salt (NaBr) (kobs = 21.35 M−1Min−1), the reaction rate extremely accelerates 70 or 2600 times more, respectively. These remarkable results indicated that the mentioned reaction has greatly proceeded and extremely faster in the mixture of a polar solvent and salt in comparison with the solvent alone. A mechanism involving four steps was proposed. Unfortunately, experimental data from the UV–visible technique were not adequate to determine the rate-determining step of the reaction mechanism. To clear this, Molecular Electron Density Theory computations have been consulted at the B3LYP level of theory using the standard 6-311 + G (d, p) and extra basis set of 6-311 + G (2df, 2pd) for the arsenic atom. The analysis of the relative schematic representation of the Gibbs free energy profiles revealed that 1,2-hydrogen shift proton is the rate-determining step of the reaction mechanism. The comparison of the rate constant of the reaction between DMAD, TZD and TPA in the presence of salt such as NaBr with this reaction in the absence of salt. GRAPHICAL ABSTRACT
- 23 July 2021
- Published by Taylor & Francis in Molecular Physics
- Vol. 119 (23)
Ionic strength effect on the kinetics and mechanism of N-vinyl compound formation in the presence of heterocyclic biological base: empirical and theoretical approaches
In the current work, kinetics and mechanism of the reaction between dimethyl acetylenedicarboxylate (DMAD), thiazolidine-2,4-dione (heterocyclic biological base, TZD) and triphenylarsine (TPA) has been studied for the synthesis of N-vinyl compound in the presence of various salts and solvents by the UV–visible technique. Through an alternation in the reaction environment from lone methanol (kobs = 0.3121 M−1Min−1) or acetone alone (kobs = 0.008 M−1Min−1) to a mixture of methanol and salt (NaBr) (kobs = 21.35 M−1Min−1), the reaction rate extremely accelerates 70 or 2600 times more, respectively. These remarkable results indicated that the mentioned reaction has greatly proceeded and extremely faster in the mixture of a polar solvent and salt in comparison with the solvent alone. A mechanism involving four steps was proposed. Unfortunately, experimental data from the UV–visible technique were not adequate to determine the rate-determining step of the reaction mechanism. To clear this, Molecular Electron Density Theory computations have been consulted at the B3LYP level of theory using the standard 6-311 + G (d, p) and extra basis set of 6-311 + G (2df, 2pd) for the arsenic atom. The analysis of the relative schematic representation of the Gibbs free energy profiles revealed that 1,2-hydrogen shift proton is the rate-determining step of the reaction mechanism. The comparison of the rate constant of the reaction between DMAD, TZD and TPA in the presence of salt such as NaBr with this reaction in the absence of salt. GRAPHICAL ABSTRACT
- 1 January 2021
- Vol. 5 (1) , 30-34
Kinetic Modeling on Mitoxantrone Release from Hyaluronic MNP as a Drug Delivery System
- 1 January 2021
- Vol. 5 (1) , 30-34
Kinetic Modeling on Mitoxantrone Release from Hyaluronic MNP as a Drug Delivery System
- 22 October 2020
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 196 (3) , 300-310
Kinetics and a mechanistic investigation of 2H-thiopyrano [2, 3-b] quinoline-2, 3-dicarboxylates from 2-mercaptoquinoline-3-carbaldehydes, dialkyl acetylenedicarboxylates and triphenylphosphine: Empirical approach
The main aim of full chemical-kinetics investigation in this work, was recognition of a different role of triphenylphosphine (TPP) in the reaction with dialkyl acetylenedicarboxylates [di-tert-butyl acetylenedicarboxylate (DTBAD), diethyl acetylenedicarboxylate (DEAD) or dimethyl acetylenedicarboxylate (DMAD)] in the presence of SH-acid such as 2-mercaptoquinoline-3-carbaldehyde for the generation of 2H-thiopyrano [2, 3-b] quinoline-2, 3-dicarboxylates. The unexpected and different kinetic results (in comparison with previous work in the presence of TPP) is confirmed by the UV/vis spectrophotometry technique which is accompanied by these results. (1) The reaction followed third-order kinetics. (2) Step1, containing TPP and DTBAD (DEAD or DMAD), was a fast step (kobs = 84.61 M−1.min−1). (3) The rate of overall reaction (TPP, S-H acid and DTBAD) in the presence of dichloromethane solvent (DCM) at 13 °C is (5.87 M−1.min−1), approximately 14.4 times lesser than the fast step. (4) The proposed mechanism is consist of six steps, amongst them, intermediate I3 in step4 having a well sensitive part to any changes in the reaction environment because it is near the reaction center. Any changes in dialkyl acetylenedicarboxylates’ structures can be influenced their inductive and steric effects, corresponding to remarkable changes in the rate of this step4 (k4). (4) For this reason, step4 was recognized as a rate determining-step. Graphical Abstract
- 22 October 2020
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 196 (3) , 300-310
Kinetics and a mechanistic investigation of 2H-thiopyrano [2, 3-b] quinoline-2, 3-dicarboxylates from 2-mercaptoquinoline-3-carbaldehydes, dialkyl acetylenedicarboxylates and triphenylphosphine: Empirical approach
The main aim of full chemical-kinetics investigation in this work, was recognition of a different role of triphenylphosphine (TPP) in the reaction with dialkyl acetylenedicarboxylates [di-tert-butyl acetylenedicarboxylate (DTBAD), diethyl acetylenedicarboxylate (DEAD) or dimethyl acetylenedicarboxylate (DMAD)] in the presence of SH-acid such as 2-mercaptoquinoline-3-carbaldehyde for the generation of 2H-thiopyrano [2, 3-b] quinoline-2, 3-dicarboxylates. The unexpected and different kinetic results (in comparison with previous work in the presence of TPP) is confirmed by the UV/vis spectrophotometry technique which is accompanied by these results. (1) The reaction followed third-order kinetics. (2) Step1, containing TPP and DTBAD (DEAD or DMAD), was a fast step (kobs = 84.61 M−1.min−1). (3) The rate of overall reaction (TPP, S-H acid and DTBAD) in the presence of dichloromethane solvent (DCM) at 13 °C is (5.87 M−1.min−1), approximately 14.4 times lesser than the fast step. (4) The proposed mechanism is consist of six steps, amongst them, intermediate I3 in step4 having a well sensitive part to any changes in the reaction environment because it is near the reaction center. Any changes in dialkyl acetylenedicarboxylates’ structures can be influenced their inductive and steric effects, corresponding to remarkable changes in the rate of this step4 (k4). (4) For this reason, step4 was recognized as a rate determining-step. Graphical Abstract
- 30 July 2020
- Published by Wiley in ChemistrySelect
- Vol. 5 (28) , 8806-8813
Potassium Iodide as a New Nucleophilic Catalyst for the Novel Synthesis of Ionic Vinyl Compounds: Experimental and Theoretical Kinetic Approaches
In this work, for the first time, we introduce potassium iodide as a green, inexpensive, and widely available nucleophilic catalyst for the successful synthesis of an ionic vinyl compound. FT‐IR, 1 H NMR, 13 C NMR, energy‐dispersive spectroscopy (EDS), C, H, N elemental analysis and mass spectroscopy were used for the product characterization. The reaction mechanism investigated experimentally employing the UV‐vis method and theoretically at the M06‐2x/6‐31+G(d,p)‐dgdzvp levels of theory. Pure water and step 5 ‐ in which vinylic bond appears ‐ were kinetically recognized as the best solvent and R.D.S, respectively.
- 30 July 2020
- Published by Wiley in ChemistrySelect
- Vol. 5 (28) , 8806-8813
Potassium Iodide as a New Nucleophilic Catalyst for the Novel Synthesis of Ionic Vinyl Compounds: Experimental and Theoretical Kinetic Approaches
In this work, for the first time, we introduce potassium iodide as a green, inexpensive, and widely available nucleophilic catalyst for the successful synthesis of an ionic vinyl compound. FT‐IR, 1 H NMR, 13 C NMR, energy‐dispersive spectroscopy (EDS), C, H, N elemental analysis and mass spectroscopy were used for the product characterization. The reaction mechanism investigated experimentally employing the UV‐vis method and theoretically at the M06‐2x/6‐31+G(d,p)‐dgdzvp levels of theory. Pure water and step 5 ‐ in which vinylic bond appears ‐ were kinetically recognized as the best solvent and R.D.S, respectively.
- Open Access
- 11 April 2020
- Published by Taylor & Francis in Polycyclic Aromatic Compounds
- Vol. 42 (3) , 791-814
Comprehensive Kinetics and a Mechanistic Investigation on the Biological Active Pyrano[2,3-C]Pyrazole Core in the Presence of Both Eco-Friendly Catalyst and Solvent: Experimental Green Protocol
Full chemical-kinetics of the green one-pot four-component condensation among ethyl acetoacetate 1, hydrazine hydrate 2, malononitrile 3 and various substituents of benzaldehyde 4 has been spectrally investigated for the generation of pyranopyrazoles 5. The extremely large negative ΔS‡ values were obtained for all the reactions, particularly in four-component reaction among 1, 2, 3 and para electron-withdrawing substituted benzaldehyde 4. The high unfavorable ΔS‡ value (-188.2 J mol−1 K−1) is compensated by the favorable value (lower, 13.47 k J mol−1) in comparison with ΔH‡ values of unsubstituted benzaldehyde 4 (19.1 k J mol−1) and electron-donating substituted benzaldehyde 4 (37.4 k J mol−1), herein, the reaction rate with lesser value of k J mol−1 is faster than other reactions, compared to and k J mol−1. A reliable correlation of log k and with an excellent DPF (r = 0.990) and positive value of reaction constant ( demonstrated that both resonance and inductive effects “altogether” contributed on the reaction center with a strong electron-withdrawing group, accompanied by high positive charges, which can be stabilized by electron-donating compound. The substituent effects on the reaction kinetics generally obey the same kinetics role for the series of compounds used in this work (Hammett, Exner and isokinetic relationship studies). Among ten steps inside the reaction mechanism, only step8 with the substituent group near the reaction center could be resonated directly with this center. So, step8 was identified as RDS.- 11 April 2020
- Published by Taylor & Francis in Polycyclic Aromatic Compounds
- Vol. 42 (3) , 791-814
Open AccessComprehensive Kinetics and a Mechanistic Investigation on the Biological Active Pyrano[2,3-C]Pyrazole Core in the Presence of Both Eco-Friendly Catalyst and Solvent: Experimental Green Protocol
Full chemical-kinetics of the green one-pot four-component condensation among ethyl acetoacetate 1, hydrazine hydrate 2, malononitrile 3 and various substituents of benzaldehyde 4 has been spectrally investigated for the generation of pyranopyrazoles 5. The extremely large negative ΔS‡ values were obtained for all the reactions, particularly in four-component reaction among 1, 2, 3 and para electron-withdrawing substituted benzaldehyde 4. The high unfavorable ΔS‡ value (-188.2 J mol−1 K−1) is compensated by the favorable value (lower, 13.47 k J mol−1) in comparison with ΔH‡ values of unsubstituted benzaldehyde 4 (19.1 k J mol−1) and electron-donating substituted benzaldehyde 4 (37.4 k J mol−1), herein, the reaction rate with lesser value of k J mol−1 is faster than other reactions, compared to and k J mol−1. A reliable correlation of log k and with an excellent DPF (r = 0.990) and positive value of reaction constant ( demonstrated that both resonance and inductive effects “altogether” contributed on the reaction center with a strong electron-withdrawing group, accompanied by high positive charges, which can be stabilized by electron-donating compound. The substituent effects on the reaction kinetics generally obey the same kinetics role for the series of compounds used in this work (Hammett, Exner and isokinetic relationship studies). Among ten steps inside the reaction mechanism, only step8 with the substituent group near the reaction center could be resonated directly with this center. So, step8 was identified as RDS. - 28 September 2019
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 195 (2) , 149-157
Kinetic analysis of new multi-component reaction for the formation of Z-N-(3-(naphthalene-2-yl)-4-oxothiazolidine-2-ylidene) benzamide
A new three-component reaction was studied kinetically among benzoyl isothiocyanate (1), 1-naphthylamine (2), and methyl bromoacetate (3) in the presence of triethylamine (4) as a catalyst, to yield Z-N-(3-(naphthalene-2-yl)-4-oxothiazolidine-2-ylidene) benzamide (5). The overall reaction is a combination of two reactions; 1) reaction a, between (1) and (2) forming 1-benzoyl-3-(naphthalen-1-yl) thiourea (P1); 2) reaction b, between (P1), (3) and (4) to form the product (5). The rate of reaction a, ( ) was more than the reaction b ( , in acetonitrile solvent at 25 °C. A mechanism was proposed involving step1 ( ), step2 (k2), step3 (k3) and step4 (k4). Substituent effects with electron-withdrawing groups on para-position of benzoyl isothiocyanate (1) increased the rate constants of and k2. The large negative entropy, ΔS‡, values in reactions a, and b are in agreement with step1 ( ) and step2 (k2), an associative mechanism with a negative ΔS‡. The sum of these observations proved that the rate-determining step (RDS) is step2. It seems that the most important steps in the reaction mechanism are step1 ( ) and step2 (k2), which strongly control the reaction process. The kinetics and mechanism of these reactions were assessed by UV–vis spectrophotometry.- 28 September 2019
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 195 (2) , 149-157
Kinetic analysis of new multi-component reaction for the formation of Z-N-(3-(naphthalene-2-yl)-4-oxothiazolidine-2-ylidene) benzamide
A new three-component reaction was studied kinetically among benzoyl isothiocyanate (1), 1-naphthylamine (2), and methyl bromoacetate (3) in the presence of triethylamine (4) as a catalyst, to yield Z-N-(3-(naphthalene-2-yl)-4-oxothiazolidine-2-ylidene) benzamide (5). The overall reaction is a combination of two reactions; 1) reaction a, between (1) and (2) forming 1-benzoyl-3-(naphthalen-1-yl) thiourea (P1); 2) reaction b, between (P1), (3) and (4) to form the product (5). The rate of reaction a, ( ) was more than the reaction b ( , in acetonitrile solvent at 25 °C. A mechanism was proposed involving step1 ( ), step2 (k2), step3 (k3) and step4 (k4). Substituent effects with electron-withdrawing groups on para-position of benzoyl isothiocyanate (1) increased the rate constants of and k2. The large negative entropy, ΔS‡, values in reactions a, and b are in agreement with step1 ( ) and step2 (k2), an associative mechanism with a negative ΔS‡. The sum of these observations proved that the rate-determining step (RDS) is step2. It seems that the most important steps in the reaction mechanism are step1 ( ) and step2 (k2), which strongly control the reaction process. The kinetics and mechanism of these reactions were assessed by UV–vis spectrophotometry.- 17 July 2019
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 195 (2) , 96-106
Experimental and theoretical approaches on the reaction mechanism and kinetics of dimethyl 2-(6-oxopyridazin-1(6H)-yl)fumarate: Micelle and salt effects
A one-pot diastereospecific reaction between DMAD (dimethyl acetylenedicarboxylate) (1) and 3-(2H) pyridazinone (2) in the presence of AsPh3 (3) as an efficient catalyst was studied kinetically. The effect of different salts was considered on the reaction velocity in methanol. The results highlighted that NaBr and CaCl2 salts – in 5 × 10−2 M and 10−2 M concentrations, respectively – raised the reaction rate near four times. Sodium dodecyl sulfate (SDS) as an anionic micelle was added to the solution, and the reaction rate decreased by half. The first and second steps (k1 and k2) of the reaction mechanism become observable in the UV – Vis spectrum when SDS was added to the reaction medium, this observation creates new information regarding the reaction mechanism. Activation energy and its related parameters were determined for the reaction, hence associative mechanism, chemically and enthalpy-controlled being of the reaction documented. A computational study was carried out (for the reaction in the absence of SDS) employing DFT method at the B3LYP/6-31 + G(2d,p) level of theory and fourth step, approved as RDS (rate determining step). Job’s method was used to determine the stoichiometry ratio among the reactants (1), (2) and (3) and the relevant plot exhibited the 1:1:1 stoichiometric ratio. Graphical Abstract
- 17 July 2019
- Published by Taylor & Francis in Phosphorus, Sulfur, and Silicon and the Related Elements
- Vol. 195 (2) , 96-106
Experimental and theoretical approaches on the reaction mechanism and kinetics of dimethyl 2-(6-oxopyridazin-1(6H)-yl)fumarate: Micelle and salt effects
A one-pot diastereospecific reaction between DMAD (dimethyl acetylenedicarboxylate) (1) and 3-(2H) pyridazinone (2) in the presence of AsPh3 (3) as an efficient catalyst was studied kinetically. The effect of different salts was considered on the reaction velocity in methanol. The results highlighted that NaBr and CaCl2 salts – in 5 × 10−2 M and 10−2 M concentrations, respectively – raised the reaction rate near four times. Sodium dodecyl sulfate (SDS) as an anionic micelle was added to the solution, and the reaction rate decreased by half. The first and second steps (k1 and k2) of the reaction mechanism become observable in the UV – Vis spectrum when SDS was added to the reaction medium, this observation creates new information regarding the reaction mechanism. Activation energy and its related parameters were determined for the reaction, hence associative mechanism, chemically and enthalpy-controlled being of the reaction documented. A computational study was carried out (for the reaction in the absence of SDS) employing DFT method at the B3LYP/6-31 + G(2d,p) level of theory and fourth step, approved as RDS (rate determining step). Job’s method was used to determine the stoichiometry ratio among the reactants (1), (2) and (3) and the relevant plot exhibited the 1:1:1 stoichiometric ratio. Graphical Abstract
- 1 May 2019
- Published by Elsevier in Tetrahedron
- Vol. 75 (19) , 2807-2816
Understanding the domino reactions of alkyne-tethered N-tosylhydrazones yielding fused polycyclic pyrazoles. An MEDT study
- 1 May 2019
- Published by Elsevier in Tetrahedron
- Vol. 75 (19) , 2807-2816
Understanding the domino reactions of alkyne-tethered N-tosylhydrazones yielding fused polycyclic pyrazoles. An MEDT study
- 4 March 2019
- Published by Taylor & Francis in Polycyclic Aromatic Compounds
- Vol. 41 (1) , 143-159
Synthesis, Kinetics and a Full Mechanistic Investigation of Four-Component Reaction for Preparation of 2-Amino-3-Cyanopyridine Derivatives in the Presence of Green Catalysts
2-Amino-3-cyanopyridine derivatives have been synthesized via a four-component reaction of malononitrile (1), aromatic aldehyde (2), cyclohexanone (3), and amines (4) in the presence of fructose and maltose catalysts with good to excellent yields. In addition, for the first time we describe the experimental kinetics study and a full mechanistic investigation of title reaction. To determine the right position of each component in the reaction path, kinetic study of the reaction was carried out using UV–vis spectrophotometry technique. Based on temperature effects on the reaction rate, activation energy (Ea= 28.97 ± 0.21 kJ mol−1) and its parameters (ΔH‡ = 26.49 ± 0.23 kJ mol−1, ΔS‡ = −122.88 ± 0.67 J mol−1 K−1 and ΔG‡ = 63.12 ± 0.46 kJ mol−1) were determined, so the reaction was enthalpy and chemically controlled and also its mechanism was associative. By the change in the solvent polarity, it was found that polar solvents increase the reaction rate and the mixture of water/ethanol (50/50) was the best choice. Changing the structure of aniline (4) and benzaldehyde (2) by the substituent groups exhibited that the reaction proceeds faster in a poor electronic ring, regarding benzaldehyde (2), which is the result of the electron-withdrawing groups and a rich electronic ring for aniline, which is because of the electron donating groups. Further investigations on the partial orders of reactants approved the independency of the rate law to the concentrations of components (3) and (4), so the reaction was second-order kinetics corresponding to compounds (1) and (2) with the right rate law = . Step7 was recognized as the RDS.- 4 March 2019
- Published by Taylor & Francis in Polycyclic Aromatic Compounds
- Vol. 41 (1) , 143-159
Synthesis, Kinetics and a Full Mechanistic Investigation of Four-Component Reaction for Preparation of 2-Amino-3-Cyanopyridine Derivatives in the Presence of Green Catalysts
2-Amino-3-cyanopyridine derivatives have been synthesized via a four-component reaction of malononitrile (1), aromatic aldehyde (2), cyclohexanone (3), and amines (4) in the presence of fructose and maltose catalysts with good to excellent yields. In addition, for the first time we describe the experimental kinetics study and a full mechanistic investigation of title reaction. To determine the right position of each component in the reaction path, kinetic study of the reaction was carried out using UV–vis spectrophotometry technique. Based on temperature effects on the reaction rate, activation energy (Ea= 28.97 ± 0.21 kJ mol−1) and its parameters (ΔH‡ = 26.49 ± 0.23 kJ mol−1, ΔS‡ = −122.88 ± 0.67 J mol−1 K−1 and ΔG‡ = 63.12 ± 0.46 kJ mol−1) were determined, so the reaction was enthalpy and chemically controlled and also its mechanism was associative. By the change in the solvent polarity, it was found that polar solvents increase the reaction rate and the mixture of water/ethanol (50/50) was the best choice. Changing the structure of aniline (4) and benzaldehyde (2) by the substituent groups exhibited that the reaction proceeds faster in a poor electronic ring, regarding benzaldehyde (2), which is the result of the electron-withdrawing groups and a rich electronic ring for aniline, which is because of the electron donating groups. Further investigations on the partial orders of reactants approved the independency of the rate law to the concentrations of components (3) and (4), so the reaction was second-order kinetics corresponding to compounds (1) and (2) with the right rate law = . Step7 was recognized as the RDS.